Used Edm Machine for sale (64,383)

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, AGIECUT Classic 2S Year of manufacture 2001 Travel paths: X= 350 mm, Y= 250 mm, Z= 256 mm Travel paths U/V axis: +/- 70 mm Maximum conicity: 30° at 100 mm height Gedpfx Abev Dkvrsheip Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 (in bath) / 450 (without bath) kg Achieveable surface quality: Ra: 0.30 µm Maximum cutting rate: 300 mm²/min Available wire diameters: 0.20 – 0.33 mm Water bath machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from 1 side) Incl. AGIEJOGGER handbox for convenient setup AGIE HSS-C generator AGIEVISION control Dimensions (length x width x height): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and overhauled after we receive the order. A test cut is then carried out with the best surface for acceptance. You receive a 6-month warranty on the machine. We are happy to offer you commissioning and training on site.

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, Completely Refurbished OPS Ingersoll Gantry 500 Eagle Die-Sinking EDM Machine – Excellent Technical and Visual Condition The machine has undergone a comprehensive, professional refurbishment in our facility and is in outstanding technical and cosmetic condition. During the overhaul, the machine was disassembled by more than 70%. All relevant wear parts, including ball guides and drive spindles, were thoroughly inspected and replaced where necessary. This was followed by a complete geometric measurement, alignment, and additional verification using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. Every hose, including hydraulic and pneumatic lines, was completely replaced. Furthermore, the machine has been fully repainted and visually presents itself in an impeccably maintained state. The generator and control system were cleaned and technically tested. The generator’s cooling unit was also cleaned to ensure reliable cooling and consistent operation. Finally, the machine underwent an extensive EDM test in accordance with OPS Ingersoll's quality and testing standards. The machine is immediately available and is ideally suited for reliable production use. Technical Data: Manufacturer: Ingersoll (OPS Ingersoll) Die-Sinking EDM Machine Model: OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture: 2009 Control system: EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Gjdjyiz T Njpfx Abhjip Powertec Easy Burn – quick programming Powertec Handheld – multifunctional manual control device Manual eroding via Powertec Handheld High-Speed Jump: max. 18 m/min Generator output: 60 Ampere, EAGLE Powertec Travel paths (X, Y, Z): 525 x 400 x 450 mm Electrode changer: 20-position pick-up carousel Work tank (W x D x H): 770 x 670 x 440 mm Worktable (W x D): 750 x 650 mm Load capacity: 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special features: Linear measuring system on all axes (Z axis standard in series)

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1270, overall weight: 280 kg, table length: 457 mm, table width: 660 mm, Electro-Discharge Drilling Machine (Disintegrator) ELECTRO ARC 2-DBQT FOR SPARK ERODING BROKEN DRILLS AND TAPS Ideal for quickly and cleanly removing broken taps, drills, studs, and screws with precision, while leaving the surrounding material intact. - Year of manufacture: 1999 - For taps M1.6 to M38 - For drills Ø1 to Ø38 - 1x collet Ø4 mm - 1x collet Ø4.5 mm - 1x collet Ø5 mm Gisdpfeymw Spsx Abhjp - 2x collets Ø6 mm - 380 V - 10 kVA - 15 A - 50 Hz - Serial No.: 1270 Free loaded onto truck

Condition: good (used), Year of construction: 2000, operating hours: 10,000 h, functionality: fully functional, AGIE FUTURA V 1PM Gsdpfeymnrmox Abhoip MONDO 20 STAR Year: 2000 Operating hours: approx. 10,000 h Documentation: Complete

Condition: used, Travel: 260x160x180mm Work-place: 600x900mm Complete with belongings Gsdpfx Abox Igc Uehjip - Documentation available: Yes - CE certificate present: No - Control: CNC Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2015, Manufacturer: EXERON, Model: S 306 MF20/30, Year of manufacture: 2015, Serial No.: 306-0102, Control system: Exeron, Model MF20/30, Travel: 1,200 x 750 x 500 mm, Workpiece clamping table: 1,500 x 1,200 mm, Tank size: 1,550 x 1,250 mm, Fill height: 550 mm, Distance table/electrode holder: 300 - 800 mm, Max. workpiece weight: 4,000 kg, Linear scales in X/Y/Z axis, C-axis with direct measurement, Raising speed: 7.5 m/min, 8-position tool changer, gap filter system, control cabinet, cooling, CO² fire extinguishing system This machine is part of an online auction. Gisdpfx Ajx Dahaebhop

Condition: excellent (used), Year of construction: 2006, Mitsubishi wire EDM machine FA20S, year of manufacture: 2006 With accessories More pictures and data will follow shortly. Gijdpfewt N Uqjx Abhsp

Condition: new, Year of construction: 2024, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 1,000 mm, table length: 4,000 mm, table width: 2,000 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,000 mm, X: 3000x2000 mm Y: 1500 mm Z: 1000 mm C-axis 360° Positioning resolution Feed range 3000 mm/min Traverse speed 18000 mm/min Working area 4000*2000*1250 mm Table size 3200*1600 mm Distance between head and table without C-axis is 1500 mm and with C-axis 1470 mm Max table load 25,000 kg Machine dimensions 6640 x 5800 x 4120 mm Machine weight 37,000 kg Giodpfx Aoxr Uzwjbhjp

Condition: like new (used), Year of construction: 2018, Usable wire diameters: from 0.1 to 0.3 mm. Machine in like-new condition with very few operating hours, mainly used for prototype production. Gjdpfx Aeykrcqsbhjip

Year of construction: 1992, condition: ready for operation (used), Length: 3100mm, width: 2350mm, height: 2474mm, weight: 4.8t, with documentation and filter system, without accessories, operating hours unknown, an on-site inspection is possible, the machine has not been used for several years, there is no one on site who can operate the machine. Giedpfx Abep R R Idshjp

Condition: used, Year of construction: 2003, total height: 2,980 mm, total width: 2,400 mm, total length: 3,000 mm, Empty weight: 5.000 kg Price: On request EDM, Erodeermachine, vonkmachine Model: CNC Manufacturer: AGIE Type: Agietron Impact 3 Year: 2003 Controller: Agie Agievision Table: 800x600mm Travel: 500x350x500mm Max. Workpiece weight: 800kg Max. Electrode-weight: 50kg Video available Documentation available Machine-dimensions: 2850x2150x2850mm Machine-weight: 3800kg - Year: 2003 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Control type: Agie Agievision - Control: CNC - Transport dimensions: 3000mm x 2400mm x 2980mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 1 Godpfx Abswnhfkjheip Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Two identical machines are available. Connected load: 32kW, length: 3500mm, width: 2400mm, height: 2400mm, weight: 3t. On-site inspection is possible. Giodpjuyk Rlofx Abhsp

Year of construction: 1987, condition: ready for operation (used), A Mitsubishi wire EDM machine including an automatic wire changer (AWF system) is available. Travel X/Y: 381mm/749mm, table dimensions X/Y: 647mm/797mm, max. workpiece dimensions X/Y/Z: 647mm/749mm/259mm, max. workpiece weight: 950kg. Machine dimensions X/Y/Z: approx. 1850mm/2600mm/1950mm, weight: approx. 4100kg. Including 12 wire spools and one ceramic replacement plate. The wire changer is defective. Documentation available. An on-site inspection is possible. Giedpfox Hz Shex Abhsp

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 450mm/350mm/400mm, travel U/V: approx. +/-70mm, rapid traverse: 900mm/min, max. workpiece dimensions X/Y/Z: 1050mm/650mm/250mm, max. workpiece weight without/with tank: 800kg/400kg, wire diameter range: 0.2mm-0.33mm, tank volume: approx. 750l. Machine dimensions X/Y/Z: approx. 2000mm/2300mm/2500mm, weight: approx. 4000kg, control: Agievision. Documentation available. An on site inspection is possible. Gsdpfoxwyv Rox Abheip

Condition: ready for operation (used), Year of construction: 2008, An Agie start hole drilling machine for the EDM industry is available. Travel X/Y/Z: 300mm/200mm/300mm, electrode diameter: 0.3mm-3mm, max. drilling depth: 200mm, table dimensions X/Y: 400mm/300mm, max. workpiece weight: 300kg. Machine dimensions X/Y/Z: approx. 1400mm/900mm/2000mm, weight: approx. 950kg. Documentation available. On-site inspection is possible. Godpfx Aju Ilbuebhsip

Condition: ready for operation (used), Travel X/Y/Z/U/V: 400mm/250mm/400mm/400mm/250mm, max. workpiece dimensions X/Y/Z: 850mm/500mm/400mm, wire diameter: 0.1mm-0.3mm, max. table load: 1000kg, power requirement: 10kVA. Machine dimensions X/Y/Z: approx. 1800mm/1600mm/2230mm, weight: approx. 2800kg. On-site inspection is possible. Gjdpouqackjfx Abhoip

Year of construction: 1990, condition: ready for operation (used), With dielectric, fully automatic water treatment system with ion exchanger, filtration system, clamping system with generator and adaptive discharge unit for precise machining, cooling and hydraulics, external pump and filtration systems. Without documentation, maintained internally, pneumatic hoses have been renewed, the machine has not been in operation since 2022 but was last functional. A clamping system is optionally available. An on-site inspection is possible. Giodpew S Tygjfx Abhsp

Year of construction: 2008, condition: ready for operation (used), A start-hole drilling machine Madra-EDM is available. Clamping dimensions X/Y: 600mm/400mm, max. workpiece height: 300mm, travel X/Y: 500mm/400mm, travel W: 250mm, travel Z: 0.01mm-380mm, max. electrode length: 400mm, max. workpiece weight: 500kg, drilling diameter range: 0.3mm-3mm. Machine dimensions X/Y/Z: approx. 1300mm/1300mm/2000mm, weight: approx. 1000kg. The electronics of the machine are defective, as the current for the erosion process is not provided. Dokumentation vorhanden. An on-site inspection is possible. Gsdpox Dcarefx Abhsip

Condition: ready for operation (used), Workpiece dimensions X/Y/Z: 1050mm/800mm/295mm, max. workpiece weight: 800kg, table dimensions X/Y: 780mm/630mm, traverse path X/Y/Z: 500mm/350mm/300mm, max. table feed: 1300mm/min, wire diameter range: 0.1mm-0.3mm, max. wire feed: 15m/min, traverse path U/V: +/-32mm, max. taper angle: 15°. Machine dimensions X/Y/Z: approx. 1900mm/2650mm/2100mm, weight: approx. 3500kg. Including generator unit and automatic wire threader AT. Documentation available. On-site inspection is possible. Gjdpfx Asvb Hbrsbhsip

Year of construction: 1995, condition: ready for operation (used), X-axis: 400mm, Y-axis: 250mm, Z-axis: 256mm, max. workpiece weight: 400kg, max. workpiece dimensions: 580/860/250mm, support surface: 680/500mm, min. start hole diameter: 2mm, cutting rate: 185mm²/min, generator: Agiplus-MMD, control: Agimatic CF20. With dielectric processing unit DA-15/C. The display power supply is defective. The machine has already been dismantled, an on-site inspection is possible. Giodpsw Sxx Isfx Abhep

Year of construction: 2008, condition: refurbished (used), AGIECUT Challenge V3, Godpfxom Amf De Abhoip Year of manufacture 2008 travels: X= 500 mm, Y= 350 mm, Z= 256 mm travels U/V-axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.2 µm Available wire diameters: 0.10 - 0.33 mm Water bath machine with automatic wire threading With automatically lowerable tank (accessible from 2 sides) Incl. AGIEJOGGER- hand box for comfortable set-up Incl. AGIESETUP 3D AGIEVISION 5 control system AGIE IPG-V generator Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine is cleaned, overhauled and extensively tested by us after receipt of order. Incl. user training at Techma on your overhauled machine Optional: transport, commissioning, training, cooler

Condition: used, Year of construction: 1975, Technical details: table length: 430 mm table width: 270 mm x-axis: 300 mm y-axis: 240 mm z-axis: 250 mm total power requirement: 2 kVA weight of the machine ca.: 0,72 t weight: Schaltschrank: ca. 200 kg space requirements of the machine approx.: L:0,9 x B:1,0 x H:2,1 m Gedpfxou Nu Elj Abhjip START HOLE EROSION MACHINE - size of cooling pond: 1000 x 510 x 900mm - incl. electric cabinet: 600 x 550 x 1400mm Machine is on sale as is, without been checked and will be sold as is! i.D. *

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Challenge 2 eCut Year of manufacture: 2005 Travel ranges (X/Y/Z): 350 x 250 x 256 mm Travel ranges (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without bath): 200/450 kg Best achievable surface finish: 0.2 µm Ra Available wire diameters: 0.10 - 0.33 mm Includes AGIE universal clamping frame Includes AGIE JOGGER handbox Includes console with USB port Gisdsxyxfpjpfx Abhsp The machine will be cleaned, overhauled, and tested by us after receipt of the order. Commissioning and training can also be provided upon request.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 591.063.002.0050, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, table width: 600 mm, overall weight: 2,850 kg, table length: 900 mm, Equipment: documentation/manual, The AgieCharmilles CUT 300 Sp is a high-performance and versatile wire EDM, ideal for precision manufacturing of molds, prototypes, and complex components, offering: Gjdpfx Abjwwrk Nshjip * extensive spatial travels * large dielectric capacity * ability for taper cutting * robust CNC control system.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 591.063.060.0016, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, table width: 600 mm, overall weight: 2,800 kg, table length: 900 mm, Equipment: documentation/manual, The CUT P 550 model from 2017 is an advanced five-axis wire EDM machine, ideal for precise industrial applications: * wide angular range capabilities (up to 30–45°), * efficient and intelligent IPG generator, * accuracy within a few µm, * advanced automation systems and anti-collision protection, Gijdpewwrtwofx Abhop * stable, durable design enabling fully automatic operation.