Used Ehrler Und Beck for sale (80)

Condition: used, Year of construction: 2014, Speed: 1450 rpm Motor: 2.4 kW Suction capacity / Flow rate: 70 m³/h Suction pressure: 3 mbar Tank: Operating pressure: 0.99 bar Capacity / Liters: 90 Operating temperature: 50°C Year of manufacture: 1989 No. 400 100 Gedpfx Anjvvi Nnozjbn Storage location: Supplier

Condition: new, Work and Assembly Table New Machine Year of Manufacture: 2023 The ergonomic work and assembly table ErgoPlan EP1 is equipped with a bench top made from selected, solid red beechwood. The surface is waxed and polished. The stepless height adjustment under load is smooth and precise—even with asymmetrical loading of the tabletop. TECHNICAL DATA Bench top without vises: 1,700 x 640 x 120 mm 2 vise keys: - Front vise made of solid cast iron/steel construction - Rear vise with robust aluminum box guide (with adjustable guide prism and plastic slide guide) Top thickness: 120 / 60 mm Gedskwhwzjpfx Anzjbn Usable lift: 300 mm ErgoPlan height: 780 mm Weight of bench top: approx. 95 kg Total weight: approx. 240 kg An attached cover on the rear side serves as protection against shearing and as a pinching guard. The lifting unit is concealed in the left lifting column and thus protected from dirt and damage. Load capacity up to 400 kg Maximum overall height: 1,080 mm 2 ErgoPlan bench hooks, consisting of aluminum round bench hooks with ball locking mechanism, 30 mm, length 200 mm 1 vertical clamp for securing the workpiece from above, with 1 indexing bolt, adjustable up to 200 mm workpiece thickness, 360° swivelling Availability: short-term Location: Flörsheim

Condition: new, Year of construction: 2026, neu 2026 060182 prompt, Zwischenverkauf v Deutschland 3806 € 1 3000 mm 820 - 940 mm 300 kg/m 350 mm 65 x 3 mm 15 mm 2600 mm 250 mm with mm-scale and magnifier on stop carriage rolls and table with manual measuring system and a rigid flat steel guide Gjdeyw Tkqepfx Anzjbn stop carriage 6-fold ball bearing mounted, manually slideable and fixable fold up material stop INCL. FOLLOWING OPTION: material depth stop arm sprung and adjustabel up to the mechanical zero (man. dischargeable by eccentric lever (SZ05) FURTHER LENGTHS AND ROLL WIDTHS ON REQUEST

Condition: new, neu ca. 8 Wochen ab Auftragse Deutschland 4576 € 3000 mm 820 - 940 mm 300 kg/m 350 mm 63 x 3 mm 15 mm 2550 mm 250 mm digital readout adjustment by handwheel Godpfx Aeyq Spksnzobn pneum. brake material depth stop with 12 times ball bearings on generous large dimensioned guiding profile FURTHER LENGTHS: 2 meter € 3.801,- 4 meter € 5.319,- OPTIONS: Measuring systm with 1/10 mm readout Z 58 with magnetic polring and sensorhead SZ 09 € 883,- material depth stop arm sprung and adjustabel up to the mechanical zero (man. dischargeable by eccentric lever SZ 05 € 528,- pneum. arm retraction (10 mm discharge stroke) of sprungmaterial depth stop (SZ 05) SZ 07 € 441,- cover plate between the carrier rollers, galvanized per running meter SZ 06 € 122,- FURTHER LENGTHS AND ROLL WIDTHS ON REQUES.

Condition: new, neu ca. 8 Wochen ab Auftragse Deutschland 3278 € 3000 mm 820 - 940 mm 300 kg/m 350 mm 63 x 3 mm 15 mm 2600 mm 250 mm with mm-scale and magnifier on stop carriage Gjdpfx Aowirnljnzobn rolls and table with manual measuring system and a rigid flat steel guide stop carriage 6-fold ball bearing mounted, manually slideable and fixable fold up material stop FURTHER LENGTHS: 2 meter € 2.719,- 4 meter € 4.162,- OPTIONS: material depth stop arm sprung and adjustabel up to the mechanical zero (man. dischargeable by eccentric lever SZ 05 € 528,- cover plate between the carrier rollers, galvanized per running meter SZ 06 € 122,- FURTHER LENGTHS AND ROLL WIDTHS ON REQUEST. (sample photo)

Condition: new, neu ca. 8 Wochen ab Auftragse Deutschland 2004 € 3000 mm 820 - 940 mm 300 kg/m 350 mm 63 x 3 mm 15 mm 250 mm supply- and removal roller table with lateral guidance FURTHER LENGTHS: 1meter € 1.149,- 2 meter € 1.418,- Godpowiq Spsfx Anzsbn 4 meter € 2.405,- 5meter € 3.001,- 6 meter € 3.668,- FURTHER LENGTHS AND ROLL WIDTHS ON REQUES. (sample photo)

Year of construction: 1991, condition: excellent (used), Manufacturer: Beck Max. throughput: 650x300mm Max. temperature: 350 °C Godsmv E Icspfx Anzebn Stepless speed adjustment, forward/reverse. 400V, 50Hz, 28A Enclosure dimensions: 2500 x 1100 x 1500 mm (LxWxH)

Year of construction: 1988, condition: excellent (used), Manufacturer: Beck Max. throughput: 660x180mm Max. temperature: ca 300 °C Gbedpfx Asmv Hy Henzon Stepless speed adjustment, forward/reverse. 400V, 50Hz, 28A Enclosure dimensions: 2500 x 1100 x 1500 mm (LxWxH)

Condition: new, Year of construction: 2026, NIVEAU - Lift table HS 300 midi incl. swivelmax Description: ᐳ Mobile scissor lift table with platform base frame and 4 holes for holding pins; 4 swivel castors, 2 of which have brakes; wheel Ø 125 mm; operated via foot pump Load capacity in kg: 300 Weight in kg: 85 Effective stroke in mm: 610 Overall height in mm: 400 Overall height in mm: 1010 Platform size in mm: 1200 x 740 Inclusive ! Swivelmax - platform swivel frame with 2-position locking (vertical/horizontal) for panel weights up to approx. 120 kg. The swivel frame can be mounted on the platform base frame of the HS 300 midi in just a few simple steps. Even large-format panels can be swiveled from the vertical to the horizontal position by one person without any effort using this accessory. Size of the panel pivoting frame 1800 x 1480 mm Gbjdpfotgychex Anzon Location: ex stock 54634 Bitburg - available immediately -

Condition: ready for operation (used), Year of construction: 2007, A horizontal flow wrapping machine with side sealing Hugo Beck is available. Film feed: roll, max. film width: 500mm, film web width: 550mm, max. film roll diameter: 350mm, min. product length: 100mm, product width range: 10mm-450mm, max. product height: 250mm, cycle output: 100/min, max. mechanical speed: 28m/min. Machine dimensions X/Y/Z: approx. 2250mm/1500mm/1300mm, weight: approx. 750kg. Documentation available. An on-site inspection is possible. Gedjzc Rfbjpfx Anzjbn

Condition: ready for operation (used), Manufacturer: Beck -external sizes: 1700x1010x1400mm -Permeable cross section: 540x240mm Gjdeu Nuyiopfx Anzsbn -The temperature range: 0-400 °C

Condition: used, Roller conveyor Length 4300 mm Width 600 mm Height 800/900 mm Gsdpsxf T Ebsfx Anzobn Roller length 500 mm Roller pitch 400 mm Number of rollers: 12 pcs. SEW geared motor

Condition: ready for operation (used), A 3-side sealing packaging machine Beck is available. Processing materials: recyclable mono films/recycled material/bio film, product width range: 20mm-400mm, max. product height: 200mm, max. packaging capacity: 60cycles/min. Including beck heat shrink tunnel. Documentation available. An on-site inspection is possible by appointment. Gbsdpfx Aexn Aamjnzjn

Condition: used, Year of construction: 2010, functionality: fully functional, The machine has been returned and is now functioning properly after a new machine was purchased. Gbodozbipispfx Anzjn

Condition: ready for operation (used), functionality: fully functional, total length: 5,000 mm, film width: 550 mm, product height (max.): 200 mm, product width (max.): 400 mm, product length (min.): 80 mm, Equipment: documentation/manual, Shrink wrapping machine Manufacturer: Hugo Beck Type: Flexo 500 S Horizontal flow wrapping machine with side sealing for tubular film, consisting of a wrapping machine and a subsequent shrink tunnel. The Flexo 500 tubular film machine boasts the highest degree of variability and flexibility. Whether for frozen pizzas, biscuit boxes, fruits and vegetables, books, skis, laminate flooring, or various household products, etc. – with this machine, you can quickly adapt to any application, for example, for daily changing orders. - Wrapping machine Hugo Beck Flexo 500 S, year of manufacture 2003 Workpiece dimensions: Width approx. 55 - 400 mm Height approx. 2 - 200 mm Length from min. approx. 80 mm to theoretically unlimited Consumable/film: half-tube, PE, PP Roll diameter: 350 mm Film width: 550 mm Feed rate approx. 20 m/min. Rated voltage 400/230 V, 50 Hz, 3 phases Rated current 5 A Connected load 3 kW Machine dimensions approx. 2500 x 1500 mm L x W Weight approx. 650 kg - Shrink tunnel Hugo Beck Type HV 601, year of manufacture 2002 Working width approx. 600 mm Clearance height approx. 300 mm Feed rate continuously adjustable Gbodpfeyw H Rksx Anzsn Chain slat conveyor, silicone-coated transport slats Temperature control via electric thermostat, separately adjustable lower and upper heat Heating approx. 4 - 12 kW Rated voltage 230/400 V, 50 Hz, 3 phases Rated current 19 A Connected load approx. 12 kW Machine dimensions approx. 2500 x 1100 mm L x W Weight approx. 400 kg

Condition: as good as new (ex-display), Year of construction: 2024, - Mobile scissor lift table with single scissors - with smooth sheet metal plate and push handle - Operation for the up / down stroke takes place via a hydraulic foot pump - load capacity 500 kg - Construction height 400 mm - Useful stroke 540 mm - Maximum height 940 mm - Platform size 1100 mm x 700 mm - Dead weight 148 kg - 2 swivel castors with brakes, 2 fixed castors without brakes Gjdpfx Anefhbv Tozsbn - Wheel Ø 150 mm - Powder coating lacquer floor frame and platform frame light gray RAL 7035, scissors in violet blue RAL 5000

Condition: as good as new (ex-display), Year of construction: 2021, - mobile scissor lift with single scissors - with smooth sheet metal plate WITHOUT push bar - The up/down stroke is actuated by a hydraulic foot pump - Load capacity: 1200 kg Gjdpfx Aefnnayonzjbn - construction height: 450 mm - effective stroke: 700 mm - Maximum height: 1150 mm - Platform size: 2000 mm x 1000 mm - Own weight: 420 kg - 2 swivel castors with brake, 2 fixed castors without brake - Wheel-Ø: 150 mm - Powder coating of base frame and platform frame light grey RAL 7035, scissors in violet blue RAL 5000

Condition: as good as new (ex-display), Year of construction: 2023, Technical description with the following main data: Load capacity 3000 kg static line load effective stroke 1100 mm Overall height 250 mm Total height 1350 mm Platform length 1700 mm Platform width 1200 mm Material smooth sheet metal Lifting time approx. 29 sec. for the full effective stroke Lowering time depending on load Electrical connection 3 x 400 V/ 50 Hz + protective earthing, with 16 A CEE plug and 3 meter cable Gbsdpfjupztzex Anzjn Motor 2.2 kW, 1,400 rpm. Valve voltage 24 V DC Sealing class IP 54 general, solenoid valve and switch IP65 Power unit position integrated in the lift table Control box dead man's control incl. 2 m cable Total weight approx. 455 kg Floor frame for moving with pallet truck or forklift

Condition: new, Year of construction: 2024, - Mobile scissor lift table with platform base frame and aluminum worktop format 1000x600mm - Operation for the up / down stroke takes place via a hydraulic foot pump - load capacity 200 kg Gbjdefhbvnepfx Anzsn - Construction height 400 mm - Useful stroke 610 mm - Maximum height 1010 mm - platform 1000x 600 mm - Weight approx. 35 kg - Swivel castor 2 pieces with brake, 2 pieces without brake - Wheel Ø 125 mm - Color gray aluminum

Condition: new, Year of construction: 2024, functionality: fully functional, Technical description with the following main data: Load capacity 1000kg static line load useful stroke 775mm overall height 85 mm total height 860 mm platform length 1450 mm platform width 1140 mm Material smooth sheet metal Lifting time approx. 20 sec. for full useful stroke Lowering time load dependent E-connection 3 x 400 V/ 50 Hz + protective grounding, w. 16 A CEE-plug and 4 meter cable motor 1,1 kW Painting blue-grey RAL 7031 Unit placement free standing Control box dead man control incl. 2 m cable Total weight approx. 270 kg Standard version: The lifting tables comply with EN 1570 E and are CE marked. The steel parts are cleaned, primed with anti-rust paint and painted with two-component polyurethane paint. The lifting tables are equipped as standard with aluminum safety shut-off bars on all sides and with mounting supports for repair and service. Gjdeiwi Inspfx Anzebn Our lifting tables are dimensioned for approx. 5 strokes/hour with full load in 8 hours /day. For more intensive operation we offer special lifting tables.

Condition: new, Year of construction: 2024, functionality: fully functional, total height: 1,020 mm, construction height: 410 mm, lifting height: 600 mm, empty load weight: 150 kg, load capacity: 350 kg, total length: 1,900 mm, total width: 740 mm, warranty duration: 24 months, LEVEL - Lift Table HS 350 Large without worktop Description: Gbedpfx Anjh A Hxiszon ᐳ Mobile scissor lift table with double horizontal scissors, basic version without worktop; with platform base frame for accommodating various worktops; 4 swivel castors, 2 with brake; Wheel diameter 125 mm; operated by foot pump Load capacity in kg: 350 Weight in kg: 150 Useable lift in mm: 610 Construction height in mm: 400 Total height in mm: 1010 Platform size in mm: 1900 x 740

Condition: like new (used), Year of construction: 2024, Technical specifications: - Motor power 2.2 kW S1 - Max. Saw blade diameter: 350 mm - Saw blade holder: 30 mm - Cutting time per stroke: 1.5 sec. - Speed ​​on the saw shaft: 3800 rpm - Air consumption per cycle: 5 L - Working table height: 900 mm - Extraction nozzle: 2x100 mm - Operating pressure: 7-8 bar - Net weight: approx. 200 kg Gbsdpjfhbuyefx Anzen - Required air flow 1000 m³ / h - Voltage: 400 V / 50 Hz 3-phase - Cutting capacity in mm: 45 x 230 60 x 210 90 x 180 100 x 125 Standard basic equipment: - Saw blade feed pneumatic drive - Automatic engine brake - Set of operating keys - Emergency stop push button - Speed ​​control for saw blade feed - Fixed vertical protection device - Upper safety pressure device (pneumatic protective hood) - Suction speed at least 28m / sec. - Colors: basic stand light gray RAL 7035, doors telegrey RAL 7046, protective shield and protective hood zinc yellow RAL 1018

Condition: as good as new (ex-display), Year of construction: 2024, - mobile scissor lift table with sheet metal plate - The up/down stroke is actuated by a hydraulic foot pump - Load capacity 300 kg - Overall height 400 mm Godpfxjfnp Rps Anzobn - Useful stroke 610 mm - Maximum height 1010 mm - Platform size 1000 x 600 mm - Own weight 75 kg - Swivel castor 2 pieces with brake, 2 pieces without brake - Wheel-Ø 125 mm - Powder coating of base frame and platform frame light grey RAL 7035, scissors in violet blue RAL 5000

Condition: new, Year of construction: 2024, - Frame and edge press 1-sided/stationary - Useful dimension in mm as frame press 2630 x 1610 - Useful dimension in mm as edge press 3000 x 1610 - outer dimensions in mm 3200 x 2090 x 730 - Sturdy welded frame construction made of thick-walled profile tubes and laser-machined sheet steel parts ensure a torsion-free and dimensionally stable press base frame (no bolted frame parts!) - with left abutment, sliding carriage for width adjustment and central locking system and 2 hand hydraulic press units with Ergo handle - 3 vertical pressure beams type SK with roller bearings, made of strong-walled profile tube, galvanized, with hand hydraulic press units incl. Ergo handle. 20000 N pressing force, 60 mm stroke. Pressing units adjustable in 50 mm hole grid. - Lower abutment with fail-safe device, 5-fold adjustable in the hole grid. - Hold-down device with spindle press pressure - Chassis with 4 swivel castors (2 with brakes) - Powder coated (glue repellent) grey white RAL 9002 Pressure plate and abutment gentian blue RAL 5010 Godpfx Anohd Nywezjbn - Version Quattra 1-SK is equipped with comfort adjustment of the hand hydraulic press units and thus offers additional safety for the operator

Condition: used, Year of construction: 2007, Foil wrapping machine Hugo Beck CWS 500 Year: 2007 Description: Godpfeulixqox Anzebn - L-sealer Shrink tunnel