Used Eisele Vms 3 for sale (122)

Year of construction: 2004, condition: used, Technical details: Nlsdpfxsu Nit Rs Ahnsf Saw blade diameter: 450 mm cutting diameter: 150 mm hole of sawblade: 50 mm saw blade diameter: 400 - 450 mm saw blade rpm: 6 / 12 / 24 / 45 U/min cutting range 90 degrees: square: 140 x 140 mm cutting range 90 degrees: round: 150 mm cutting range 90 degrees: flat: 400 x 30 / 345 x 70 / 300 x 95 mm table-size: Ø 700 mm table rotating: 360 Grad clamping capacity: 30 bar electrics - voltage/frequency: 400 / 50 V/Hz total power requirement: 3,6 kW weight of the machine approx.: 1600 kg dimensions of machine: 1,5 x 1,0 x 2,35 m SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE - UNDERFLOOR SAW for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Circular saw with hydraulic material clamping (clamping pressure adjustable) miter +30° to - 90° Equipped with electro-hydraulic control Hydraulic pump 2.2 kW; 23 l/min. Coolant system integrated in the machine base Piece counter *

Condition: used, Year of construction: 1994, Technical details: saw blade diameter: 450 mm revolution per minute: 2820 U/min cutting lenght max.: 5000 mm cutting length min.: 240 mm air pressure - required: 6-8 bar hole of sawblade: 32 mm mitter cutting - both sides: 45+90 ° air-pressure connection: 6 - 8 bar total power requirement: ca. 4,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 6,05x1,49x1,79 m Further features of the machine: - Pneumatic vertical and horizontal tension - pneumatic mist spraying device Nlsdpfx Ahsu Nigkjnjf - height adjustable machine feet - material supports movable with saw - piece counter Cutting diameter according to tabular cutting range diagram, as dependent on speed and saw blade. Accessories: - 2 spare saw blades Machine can be demonstrated under power. i.D. *

Condition: used, Technical details: Saw blade diameter: 400 mm cutting diameter: 140 mm hole of sawblade: 50 mm saw blade rpm: 6 / 12 / 24 / 48 U/min cutting range 90 degrees: round: Ø 140 mm cutting range 90 degrees: square: 130 x 130 mm cutting range 90 degrees: flat: 370 x 30 / 315 x 70 / 265 x 95 mm Table dimensions: Ø 700 mm table rotating: 360 Grad clamping capacity: 8 - 30 bar electrics - voltage/frequency: 400 / 50 V/Hz air-pressure connection: 6 - 8 bar Njdeu Niuzjpfx Ahnolf total power requirement: 3,6 kW weight of the machine approx.: 1170 kg dimensions of machine: T: 1,5 x B: 1,0 x H: 2,35 m SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE Profile circular saw with two-hand control (underfloor saw) for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Mitre cut 30° to 90° Operation Control panel and two-hand operation Material clamping (opening width) adjustable with return stroke Saw blade feed speed adjustable Without coolant system *

Condition: good (used), Year of construction: 1993, Miter saw, saw unit right/left, double miter saw, crosscut and miter saw, double end tenoner -Manufacturer: Emmegi, Pressta Eisele, Double miter saw type SINGLE 2 HM500 -Cutting length: 250 to 5000 mm Nljdpfx Aetxkprehnsf -Saw units: swivels 45° -Saw blade: Ø 500 mm -Cutting data 90°: Cutting height 350 mm Cutting width 160 mm -Cutting data 45°: Cutting height 260 mm Cutting width 125 mm -Dimensions: 5750/1220/H1700 mm -Weight: 1200 kg

Year of construction: 2004, condition: used, Max. saw blade diameter: 500 mm Cutting area up to 80x200 mm Stroke length: max. 800 mm with digital display Saw blade RPM: 2,000 - 3,800 rpm. Nsdpfx Aexn Iq Djhnolf Piece counter with automatic shut-off when the target value is reached Continuously adjustable pneumatic material feed Hydro-pneumatic saw feed Pneumatic material clamps Spray device Including user manual Machine dimensions: 2100 x 1100 x 1500 mm (W x D x H) 1000 kg

Year of construction: 2009, condition: used, The machine is powered and can be inspected by appointment! Technical data / machine components: Year of manufacture: 12/2009 Manufacturer: PRESSTA-EISELE Voltage: 400 V Rated current: 19.2 A Operating pressure: 250 bar Dimensions: approx. 18-20 m long, approx. 3 m wide Weight, unpacked: 4.5 to 5 tons Horizontal loading magazine: 5-strand toothed belt conveyor, toothed belt width 32 mm, with teeth on the running side 17 compartments, 90 mm wide, for holding the profiles, with a pusher 40 x 10 mm (H x W) 2 sliding supports between the toothed belts as additional support Depth, max: 2,380 mm, length: 7,400 mm Loading weight, max: 1,000 kg Conveyor length: 1,850 mm Profile length, min: 1,000 mm Profile length, max: 7,300 mm Common drive via geared motor: 0.55 kW, 400 V, 50 Hz Conveyor speed: 4 m/min Material stop on the left Njdpfx Ahezbac Tenslf Magazine "empty" sensor, manual cycling Tactile switch for the first loading 5 pneumatic cylinders for aligning the profiles in the longitudinal direction 6 lifting rollers for lifting the profile from the loading magazine and transferring it to the pusher Pusher, electronically positionable feed system: Reinforced design Feed length, max: 9,000 mm Mounted on the right side of the machine Profile feed from right to left Guide profile with linear guide rail Carriage: plate construction with ball bearing carriage Drive via linear motor, positioning via magnetic strip Pneumatic material gripper All 8 profiles can be automatically clamped without adjustment Repeat accuracy: +/- 0.15 mm Rapid traverse speed, max: 180 m/min Input of the profile tube length into the control system 1 light barrier for detecting the beginning of the profile before the first punching head Punching unit: Drive: hydraulic Punching force per cylinder: 3.0 t, designed for 55 punching cycles per minute Only a maximum of 2 tools can be in operation Vertical punching head with 2 cylinders Punching stroke: 15 mm including 2 punching tools for hole ø 6.5 mm, spacing 65 mm Punching cylinders can be selected individually, guide for the profile 2 horizontal punching heads Punching stroke: 15 mm including 1 punching tool each for hole ø 6.5 mm and 1 punching tool for oblong hole 7 x 12 mm, guide for the profile Cycling lubrication system with 4 nozzles for lubricating the punches 3 l oil tank, level monitoring Saw: Drive: 5.5 kW, 400 V, 50 Hz Saw blade: ø 500 mm Saw feed: pneumatic with hydraulic control, from below Pneumatic profile clamping device: vertical and horizontal Cycling lubrication system with one nozzle Flap after the saw for removing cut-off pieces and scrap, max. 200 mm length Parts fall downwards into the provided box Longer scrap pieces are disposed of with good parts Needle marking system: Character size: 2 – 7 mm Marking window: 80 x 20 mm, 15 characters including spaces Marking always approx. 190 mm after the saw cut Data transfer from an Excel file via interface Each profile can have a different designation

Condition: used, Year of construction: 1991, We offer the following machine: - with roller conveyor --> Outfeed: 4 m --> Infeed: 3 m Technical details: Nodpjzgvqpsfx Ahnolf - Saw blade diameter: 450 mm - Cutting diameter: 150 mm - Saw blade arbor: 50 mm - Table size: Ø 700 mm - Table rotatable: 360° - Electric model - Voltage / Frequency: 400 / 50 V/Hz - Compressed air connection: 6-8 bar - Total power consumption: 3.6 kW - Machine weight approx.: 1170 kg - Machine dimensions: 1.5 x 1.0 x 2.35 m (L x W x H) Circular saw, semi-automatic - Profiling circular saw machine - Undercut saw for cutting materials: steel as solid material, tubes, and profiles, taking into account the cutting range. Cutting speed depends on the material/workpiece to be cut. Miter cut: 30° to 90°

Year of construction: 1996, condition: used, Unfolding width: max. 200 mm Unfolding depth: 40 mm Profile height: max. 100 mm Vise jaw opening: 100 mm Feed length: max. 500 mm Speed: 2,800 rpm Electric milling feed by pressing the foot switch Profile clamping by infinitely adjustable vise. Nlsdpfx Aeq Awg Eshnof

Year of construction: 1993, condition: used, Milling cutter diameter: 300 mm Max. cut-off width: 350 mm Max. release depth: 110 mm Max. profile height: 150 mm Sackson length: 500 mm Nljdpfx Ahorv A Hmsnef Stop between 20° - 90° - 20° Pneumatic workpiece clamping Minimum quantity spray device Manual feed Weight: approx. 280 kg

Condition: good (used), Year of construction: 1967, functionality: fully functional, Metal cut-off saw Type LMS I - Year of manufacture: 1967 - 380 Volt - 1450 rpm; 2950 rpm - 1.8 kW Nodpfx Aexa Hkmshnolf Transport available at an additional cost! Due to the age of the used machine, warranty is excluded for sales to commercial customers.

Condition: excellent (used), Year of construction: 1999, Type: AKF 250L Motor: 400V 2,2kW Speed: 2800 rpm Cutter O: 250mm Cutter holder shaft O: 40mm Milling width: 300mm Milling depth: 85mm Nedpott Eb Sjfx Ahnolf Profile height: 160mm Weight: approx. 150kg Dimensions W x H x D 950 x1450 x 930 mm

Condition: good (used), Year of construction: 1996, Punch, complete with base frame Hydro-pneumatic drive ■ Operation via foot valve ■ Stroke length max. 40 mm ■ 25 double strokes / min. ■ Installation height max. 250 mm Nsdpfetk Ul Rox Ahnslf 130 mm projection ■ Projection with turntable 90 mm ■ Table top height 950 mm ■ Tappet force 90 KN at 10 bar

Year of construction: 1988, condition: excellent (used), Hydropneumatic intensifier Foot valve operated Max. daylight = 280 mm Dimension 60 x 850 x 1500 mm Weight 300kg Njdpfxjfitbwo Ahnolf

Year of construction: 1992, condition: excellent (used), Transmission of power hydropneumatic / hydraulic Nedpfx Aefcbb Hshnolf

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, for processing aluminum and steel profiles with 1 vertical milling motor, 1.1 kW drive, 220/240 V, 50/60 Hz Speed: 7,000 – 11,000 rpm 2 pneumatic indexing pins, with indexing pin 5/8/10 mm Pneumatic workpiece clamping: 2 horizontal clamping cylinders 1 pneumatic spray nozzle Milling area, length/depth: 365 x 230 mm Profile height max. 150 mm, profile width up to 300 mm Nsdey S Aa Dspfx Ahnslf Operation via switch and 2 hand levers

Condition: excellent (used), Length: 2100 mm 7 rollers, width: 200 mm Nlodpfxsiraqio Ahnof Rollers-Ø 40 mm

Condition: good (used), Year of construction: 2002, Behringer Eisele VA-0-250-NC Circular saw TECHNICAL DATA Sawing range: 90 ° Saw blade diameter: 25 cm Bore: 40 mm Cutting range: 10-75 mm Cutting length: 5-900 mm Speed: 2800 rpm Nledpfxjvdk A Es Ahnjf Cutting speeds: 26/52/103/206 SFPM or 0.13/0.26/0.52/1.05 m/s Feed speeds: 0-40 mm/sec NC axis: Yes Dimensions: 190 x 127 x 190 Weight: 1300 kg We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Condition: like new (used), Year of construction: 2019, functionality: fully functional, PRESSTA CYKLON D double-head automatic screwing machine with all accessories for sale. Package deal: if purchased together with the WM740 welding line and SMC350 machining center, which are also listed in our ads, the price is EUR 180,000. Nodpfx Aeyziu Tjhnslf

Condition: excellent (used), Year of construction: 2017, Year: 2017 - technically efficient, ready to work – after full service - split heads - pneumatic drive Nljdpfey Naz Tex Ahnjf - maximum profile height: 160 mm - resistance unit lowered under the table - hydraulic lock for reversing the resistance unit

Year of construction: 2009, condition: used, Sawing system for aluminum with 2 saw motors that independently perform a 45° cut. Material feed unit with up to 8,100 mm Cross conveyor, storage table, chip conveyor and extraction Soundproof cabin Control via Siemens S7 panel Operating instructions etc. available, further technical data on request Nsdpfeqzmnusx Ahnelf Machine was in operation until dismantling Further technical data on request or see photos

Condition: good (used), Year of construction: 2000, High-performance universal metal circular saw Circular saw - automatic Eisele PSU 450 CNC 2 Saw blade diameter 450 mm Cutting diameter 150 mm Miter cutting - all positions +/-45° Nsdpfovxkc Isx Ahnelf Saw motor 3.6 kW

Condition: as good as new (ex-display), Year of construction: 2018, saw blade diameter: 5,50,500 mm, Machine in perfect technical condition. Practically very little used. For processing aluminum and PVC profiles. Mitres possible in 3 levels and can be used as a splitting saw, manual adjustment of the horizontal saw blade by a maximum of 20 mm in front of the vertical saw blade. Nsdpfx Aovtarnehnolf Notch options: rectangular, one-sided diagonal, two-sided diagonal, three-sided diagonal. Processing of profiles up to 300, width up to 90 °, bevels up to 30 °. Notch depth horizontally up to 185 mm, vertically up to 210 mm at an angle of 90 °. Notch width at 90 °: 300 mm, profile height 280 mm Manual adjustment of the notch and height, positioning using mechanical digital displays. Vertical saw blade rotation range 30° – 90° – 30°, (front/middle/back) manual, positioning via digital display. Vertical saw blade rotation range 30° – 90° – 30°, manual, positioning via digital display. The material stop (table top) can be manually rotated left and right within the range of 30° - 90° - 30°, positioning via measuring scale. The material depth stop can be manually adjusted via the sliding carriage and manual clamp, positioning via digital display.

Condition: excellent (used), Corner jointing machine Pressta Esiele PV10 P EU shipping approx. €350 Nedpfxjl Skl Ie Ahnslf

Year of construction: 2019, condition: excellent (used), functionality: not functional, Compact hydraulic C-frame punching machine with 160 kN punching force for precise applications on smaller profile cross-sections. The torsion-resistant frame design ensures accurate punching in aluminium, steel or plastic. Nedpfx Ajy Agqnjhnslf

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Type: AKF 250 Motor: 400V 2.2kW Speed: 2800 rpm Cutter diameter: 250 mm Cutter arbor diameter: 40 mm Milling width: 300 mm Nledpeygdf Ajfx Ahnof Milling depth: 85 mm Profile height: 160 mm Weight: approx. 150 kg Dimensions (W x H x D): 950 x 1450 x 930 mm