Used Electrode Welding Machine for sale (84,799)

Condition: good (used), TIG welding machine, welding machine, TIG welding machine -WIG welding machine AC/DC direct/alternating current -Hose packages: 3 -Max. Welding power: 225 A. -Air cooled -Incl. Ground cable Todpfxsd Naw Ij Ab Isf -Gas valve -Dimensions: 610/1270/H860 mm -Weight: 288 kg

Year of construction: 2002, condition: good (used), Single-head welding machine URBAN AKS 1105, year 2002. Condition: very good Tsdpsmqivwjfx Ab Ief

Condition: excellent (used), Here we offer you a Bielomatik laser welding system. Bielomatik laser welding system Machine description: The laser unit with integrated cooling for the laser is located in the lower left part of the machine frame. The tools are mounted on a 2-station rotary table, which rotates 180 degrees with each cycle. The work area with the welding station, the tool (on the rotary table) and the hold-down device for the product is located in the middle section of the machine frame. The control cabinet is installed at the rear. The welding station is protected against the insertion/removal area by a laser-tight cover. The welding laser (the laser supply) is switched off when a maintenance door is opened. The welding parts are loaded and removed manually. The welding process runs automatically. Laser type: YLR-300-AC-Y11/IPG The cell was used for laser welding various plastic parts (front frame). For components measuring approx. 460 x 280 mm Basic data Equipment of the machine: 1 complete machine frame with cladding, substructure and protective devices, painted Adjustable machine feet, designed for transportation with forklift. 3 manual maintenance doors in the laser-safe processing area, each secured with guard door switch with guard locking. 4 manual maintenance doors underneath the machine table. The control cabinet is permanently installed at the rear of the machine Laser system Fab. IPG 1 fiber laser 300 Wcw, at the fiber end, 1070 nm completely air-cooled. 1 power supply unit for laser unit, target beam laser and glass fiber 1 Vario-Scan for 3D welding contour 1 scanner - 20 aperture Optics, F-Teta lens, focal length determines processing field and processing distance 2x basic tool Tool coding with transponder Hold-down/clamping system for holding a mask with absolute path measuring system With pneumatic clamping system for path-controlled pressing of one welding part at a time Pneumatic air shower to protect the lens body Microbox PC427B incl. RTX (Siemens) Pre-installed Siemens S7 software PLC Profibus, Profinet, Ehternet, RS232 interface 15" touch panel for operating and entering data/parameters Machine lighting Connection flange for on-site fume cupboard Machine data: Dimensions: Machine W x D x H: approx. 2330 x 2350 x 2500mm Control cabinet: Firmly bolted to the machine frame Space requirement BF x DF: 5400 x 5400mm Technical Data: Power supply: Number of phases/rated voltage 3x400V 50Hz Connected load 5KVA Back-up fuse: 16A Exhaust air: Nominal diameter ∅160 Air volume 500-1000 m³/h Weight approx. 2000 kg Type: K3633/023 Condition: second-hand / used (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone. Tsdpfeqay Uvjx Ab Ief

Year of construction: 1993, condition: ready for operation (used), A lattice-girder/girder welding system year 1993 is offered. Girder types: KT 8, girder height: 90mm-250mm. Upper chord: 5mm-12mm smooth/ribbed. Diagonal: 4mm-7mm smooth. Lower chord: 4mm-10mm smooth/ribbed. Maximum girder length: 14000mm, cutting grid: 100mm/200mm. Coil run-off tables: 5 units, maximum stacker stacking height: 500mm. Documentation available, inspection possible by arrangement. Tsdpfx Aboxz Ewhs Ijf

Year of construction: 2015, condition: used, functionality: fully functional, machine/vehicle number: AS454, Industrial 5-axis CNC welding machine designed for fully automated welding of metal components. Tsdpfoxxlwijx Ab Isf The machine features a gantry construction with multi-axis drives and a programmable welding head, making it suitable for precise and repeatable operations in serial production. The equipment operated in an automated production line. The set includes a complete control cabinet, wiring, safety fences, and mounting components. Manufacturer: A.S.I. snc (Automazioni e Sistemi Industriali) Model / Type: SRAP Year of manufacture: 2015 Power supply: 400 V Power: 45 kVA Control cabinet: Included (Siemens SINAMICS drives, PLC controller)

Year of construction: 2002, condition: good (used), functionality: fully functional, Single head PVCu window welding machines. Excellent condition, Easy to use fully ready for work. Power supply 230V. The welding angle of the product is changed from 30 ° -180 °. Todpfxjrkm Sge Ab Ief

Condition: good (used), continuous welding machine, film welding machine -Manufacturer: Rische, continuous welding machine film welding machine Polystar -Type: Polystar 350/5 DSM-TE -Voltage: 220 V -Technical data: see photo type plate -Dimensions: 520/250/H5600 mm -Weight: 12.1 kg Tsdpevyq Duofx Ab Ief

Year of construction: 2004, condition: excellent (used), Technical specifications: System for welding longitudinal seams on steel beams with T- or H-profile, crane runway girders or bridge sections made of sheet metal - Max. boom arm height: 6,600 mm - Total length of the welding system: 6,700 mm - Horizontal reach of the boom arm: 5,000 mm Tedpfx Ajxz Hu Isb Isf - System runs on rails - Rail gauge: 2,065 mm - Submerged arc welding process (SAW) - SAW welding units - Power source: MESSER LG800N - Number of power sources: 2 units - Output: 400 amperes - Tack welding device The system is assembled and available for inspection under power in production. The seller assumes no liability for typographical or data transmission errors. The machine’s condition in terms of appearance, technology, and wear corresponds to its age; used machines are sold without any warranty.

Condition: excellent (used), Votan Type: Jenoptik Votan W4 Votan Jenoptik modular laser welding system Votan Jenoptik laser machine Votan W modular laser welding system Laser welding allows you to connect plastic parts precisely, energy-efficiently and quickly. This creates strong and resilient welds that are free of marks on the visible side. This means that plastic welding using laser technology also meets the highest aesthetic demands. Nominal voltage/frequency: 3x 400 V / N / PE / 50 Hz Control voltage: 24 V DC Max. current: 20 A Main fuse: 25 A Condition: used Tedpehr Dlisfx Ab Iof Scope of delivery: (See image) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Year of construction: 1992, condition: ready for operation (used), Offered is a lattice girder/girder welding system year 1992 incl. corresponding stacker SVH 195 year 1992. Girder height: 90mm-250mm, upper chord: 5mm-12mm smooth/ribbed, diagonal: 4mm-7mm smooth, lower chord: 4mm-10mm smooth/ribbed, girder length max.: 14000mm, fixed lengths, cutting grid: 100mm/200mm. 5 coil payoff plates, stacker SVH 195, stacking height max.: 500mm. Inspection is possible by arrangement. Tjdpfx Ajxz Ev Reb Isf

Condition: used, Year of construction: 2019, functionality: fully functional, Amps.: 300 Watercooled: Yes. Control: TA 24. Year: 2019 Tjdpfx Aexzrzgob Iof Country of origin: Sweden. Size (L x W x H): 1150 x 620 x 1100 mm. Weight: 90 kg. With Esab water cooling unit, TA24 control panel and 4 m. TIG-hose. Machine have been tested and serviced.

Condition: used, DALEX Spot Welding Machine Type SF 204 Machine No. AZA/N-32865 Year of Manufacture 2010 Power at 50% duty cycle: 30 kVA Continuous power: 21.2 kVA Maximum short-circuit power: 108 kVA Maximum welding power: 86.4 kVA Throat 500 mm Arm distance 350 - 500 mm Electrode force: 65 - 360 kp (short throat) Electrode force: 25 - 140 kp (long throat) Electrode arm Ø 45 mm Electrode holder Ø 25 mm Electrode stroke 20 mm Welding capacity: Steel sheet 5 + 5 mm / max. 6 + 6 mm Brass sheet 2 + 2 mm / max. 3 + 3 mm Aluminum sheet 1 + 1 mm / max. 1.2 + 1.2 mm mm CrNi 1 + 1 mm Round steel 12 + 12 mm / 16 + 16 mm Open circuit voltage 5.2 volts Connected load 55.2 kVA Mains connection 400 volts, 50 Hz - Multifunctional welding control system with Dalex RS 15 microprocessor - Lower electrode arm with swivel fitting for height adjustment and lateral swiveling Tsdpfxeit Rq Ho Ab Isf - Foot pedal operation - Water-cooled (cooling water requirement 4 liters/min.) Space requirement L x W x H 1250 x 415 x 1200 mm (height = 1310 mm with base) Weight 196 kg Very good condition

Condition: good (used), Item number MA1162 Todpfx Abjlz Nave Iof Manufacturer PEI Italy Type PB 30 Year of manufacture approx. 1998 Length [mm] 1000 Width [mm] 300 Height [mm] 1250 Weight [kg] 200 Connected load 380 V / 30 KVA Throat [mm] 420mm

Condition: refurbished (used), Year of construction: 2025, Power at 50%: 50kVA Short circuit-current: 19kA Electrode force: 470daN / single stroke Throat depth: 250mm --- Weld control: Digit 8 --- Warranty: 6 months Tsdpsxyqn Aefx Ab Iof --- Spotwelding electrodes + spare parts at stock

Year of construction: 2020, condition: as good as new (ex-display), Here we offer you a resistance welding machine. The equipment is designed for automated resistance welding of the following connections: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The equipment is loaded and unloaded manually by one operator. Any use of the system other than the one described above is not in accordance with the intended use and is therefore not permissible! Layout of the unit Welding unit Sledge unit Cleaning unit weding electrode Base Linear unit Analysis unit DMC Dimensions (lxw) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Techn. availability % ≥ 95 Operator piece 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Back-up fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of construction 2020 Components of the plant -control cabinet -Protective enclosure -Linear unit Toothed belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Transmission ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 -Slide unit Balluff BES M08EC-PSC15B-S49G -evaluation unit DMC: Keyence SR-1000 -welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNN i=1 p=5mm Reference switch integrated: Hall PNP normally open Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNN i=1 p=5mm Reference switch integrated: Hall PNP normally open Welding gun Crede PSZ-K Control unit : ST-T13V2.0 Power unit : LT- [...] Tedpfsht U Snox Ab Iof

Year of construction: 1994, condition: ready for operation (used), Offered is a lattice girder/girder production machine year approx.: 1994. Girder height: 80mm-300mm, upper chord: 5mm smooth/ribbed, diagonal: 7mm smooth, lower chord: 5mm smooth/ribbed, girder length max.: 14000mm, cutting grid: 200mm, spool payoff tables: 5 pieces. Inspection is possible by arrangement. Tjdpfsxz Ewbsx Ab Ijf

Condition: used, functionality: fully functional, Amps.: 300 Watercooled: Yes. Control: TA 24 AC/DC. Country of origin: Sweden. Size (L x W x H): 1150 x 660 x 1150 mm. Weight: 125 kg. With Esab CoolMidi 1800 water cooling unit, TA24 AC/DC control panel and renovated SR-20 8m. TIG-hoze. Tjdpfx Abexzrw Ue Ief Machine have been tested and serviced.

Year of construction: 1999, condition: excellent (used), Year of construction approx. 1980 Power at 50% ED 35 kVA Projection 250 - 450 mm Working stroke 40 mm Electrode force 100 - 460 kp infinitely adjustable Tedpfx Abjium Nio Ijf Electrode force at 6 bar 460 daN Operating air pressure 2 to 6 bar Electrode arm Ø 60 mm Electrode holder Ø 30 mm Insertion electrodes cone MK 2 Ø 17.78 mm Arm distance 200 / 400 mm Adjustability of the electrode holder 200 mm Connected load 83 KVA Mains connection 380 volts, 50 Hz - 4-time control - stepless power adjustment - Single points and series points - parallel electrode guidance - Water-cooled (without cooling unit) - electric foot switch Weight 300kg

Year of construction: 1973, condition: used, machine/vehicle number: 261, Machine designation Spot welding machine Stock no. MA742 Manufacturer KUKA TYPE MET 70 R Year of manufacture 1973 Machine no. 261 Weight approx. 1400 kg size 900 x H 2000 x D 1400mm electrode force 50-350 Nominal power at 50% ED 70 KVA Connected load 77 KVA Operating current at 50% duty cycle 10.5 KVA Secondary short-circuit current 21.4 KA Open circuit voltage in 6 steps 3.55-6.66 V (Changes and errors in the technical data, information and prices as well as prior sale) subject to prior sale) Tedobb Alwjpfx Ab Ijf

Condition: good (used), Year of construction: 2010, functionality: fully functional, overall weight: 250 kg, type of cooling: water, From business closure: Ewm Wega 401 DW Device has been function tested! Year of manufacture: 2010 4-roller wire feeder Water cooling 2/4-stroke mode 8-meter intermediate hose package Wire feed case Tjdpfx Abjxyqqqe Ief Torch 4 meters + wire + ground cable + pressure regulator Dimensions in mm approx. 1200x460x960 Weight 250 kg

Condition: used, Dalex Works Pms 10-2 380V 50Hz Tjdpfxjg Rcpxj Ab Isf rated power at 50 duty cycle: 63 kVA secondary short circuit current: 45 kA rated primary voltage 380 V - 50 Hz open circuit voltage of 5,6 V electrode force: 65-390 daN Machine weight 341 kg

Condition: used, Year of construction: 2012, Heater Element Welding Machine with Infrared Technology (Upper & Lower Sections) – Year of Manufacture: 2012 For sale is a robust and reliable heater element welding machine equipped with infrared radiators, featuring both upper and lower sections. The system has been previously used for welding two housing halves and is ideally suited for thermoplastic materials or similar applications. Manufactured by MTV, this machine is technically solid and designed for continuous industrial operation. A comprehensive German operating manual is included. Technical Specifications Machine Dimensions Width: approx. 2325 mm Depth: approx. 1350 mm Height: approx. 2130 mm Weight: approx. 800 kg Electrical Connection Data Operating voltage: 400 V AC Control voltage: 24 V DC Fuse protection: 16 A Frequency: 50 Hz Power supply cable: 5 × 2.5 mm² Pneumatics Operating pressure: min. 6 bar – max. 8 bar (constant) Tsdexyibzepfx Ab Ijf Description / Condition Year of manufacture: 2012 Location: Thuringia Application: Thermal welding of plastic components Previous use: Welding two housing halves Design with infrared heating elements for efficient and uniform heating Very robust machine construction, suitable for industrial applications Overall in good condition. _____ Our terms and conditions (AGB) apply; the seller is not liable for typographical or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technical condition and wear of the items correspond to their age. Used machines are sold exclusively to commercial buyers and without warranty.

Condition: used, functionality: fully functional, Amps.: 300 Watercooled: Yes. Control: TA 24 AC/DC. Todpfx Aexzru Hjb Ijf Country of origin: Sweden. Size (L x W x H): 1150 x 660 x 1150 mm. Weight: 125 kg. With Esab CoolMidi 1800 water cooling unit, TA24 AC/DC control panel and renovated SR-20 4m. TIG-hoze. Machine have been tested and serviced.

Condition: excellent (used), functionality: fully functional, nominal power at 50% duty cycle: 14 kVA, input voltage: 380 V, type of cooling: water, overall weight: 300 kg, welding power (max.): 40 kVA, arm spacing: 450 mm, total width: 450 mm, total height: 1,450 mm, total length: 1,100 mm, stroke length: 110 mm, input frequency: 50 Hz, Spot welding machine Soudometal SP14P maximum welding current at 50 ED: 14 ​​kVA max. welding power 42 kVA Electrode force: 30-200 DAN Electrode stroke = 30-110 mm Tsdpswkr Insfx Ab Ijf Projection: 450 mm Mains connection 380V / 42A secondary current continuous current 1.85 kA; kA short-circuit current 12.5 kV; Electrode force: 30-200 DAN foot control Cooling water volume: 3 l/min Electrode arm Ø: 45 mm Electrode holder Ø: 25 mm Machine weight: 300 kb kg Dimensions: 1250x1100x450 mm If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: used, current capacity 8,0 kVA throat 80 - 480 mm contact pressure capacity 17 - 235 daN horn spacing 140 mm mm rated capacity 8,0 kVA voltage 380 V total power requirement 17,8 kVA weight of the machine ca. 77,5 kg dimensions of the machine ca. 0,35 x 0,80 x 1,05 m - Serial-No.: 18310126 - 2 Tjdpfx Asxtqv Teb Ief