Used Electrode Welding Machine for sale (66,557)

Condition: refurbished (used), pneumatically operated spot welding machine DALEX, type PMS 10-4 arm reach 350 mm with EH cylinder, electrode force 65-390 daN rated power at 50% duty cycle: 50 kVA secondary short-circuit current: 34 kA secondary open-circuit voltage: 2.5-5.0 V with add-on control cabinet according to VDE 0100 main switch 4-stage switch synchronous welding control 8033 Bdsdpfxohnh Ets Airoi start via foot pedal weight 410 kg

Condition: refurbished (used), DALEX seam welding machine, transverse seam version Outreach: 350 mm Rated power: 160 kVA Secondary short-circuit current: 38.5 kA Secondary open-circuit voltage: 4.8-9.6 V Electrode force: 140-2,040 daN with 2-stage switch and auxiliary control unit with thyristor power stage and Bsdpfsdx Suhox Airsdi synchronous welding control MPS 100 multi IMPORTANT NOTE – PLEASE PAY ATTENTION The above-mentioned performance data comes from the machine's nameplate. During inspection of the machine, it was found that a 200 kVA welding transformer had been installed by the previous owner. This changes the performance data.

Condition: used, Year of construction: 2024, operating hours: 400 h, functionality: fully functional, machine/vehicle number: 241118-5470, type of input current: three-phase, total height: 1,050 mm, total width: 690 mm, total length: 1,020 mm, input voltage: 400 V, overall weight: 215 kg, warranty duration: 11 months, type of cooling: water, electrical fuse: 25 A, laser power: 2,000 W, input frequency: 50 Hz, laser wavelength: 1,080 nm, Equipment: CE marking, documentation/manual, type plate available, For sale: FANTECH LWG 4.0 EXPERT 2000W handheld laser welding machine, manufactured in 2024 and only lightly used since July 2025. 3 in 1 machine - welding, cutting, cleaning. Bodpfxszvalio Airodi Should you have any questions or need additional information, please feel free to contact us by message or phone. We will be happy to assist you.

Condition: not inspected (used), for sale in the condition shown in the picture. Bdsdpfx Aeh Ti R Njirei

Condition: good (used), Stick electrodes 4.0 x 350 Bsdpfsd I Aluex Airedi -Type: FE 1006 (FE Yellow S) -Weight per package: 4.6 kg

Condition: new, Year of construction: 2025, MDP-01 SPOT WELDER 10 kW High-performance transformer 5 levels of power regulation Possibility to work with 2 x 230V (380V) power supply Bottom sliding handle Bdodpfofwxr Tjx Airei The range of welded sheets: 0.4 + 0.4 to 2 + 2 mm Width: 490mm Length: 1010mm Height: 1100mm Weight: 130kg Power supply: 380V / 3phase / 10kw

Condition: new, Year of construction: 2025, Power at 50%: 40kVA Short circuit-current: 26,2kA Electrode force: 100-600daN / single stroke Throat depth: 250-550mm --- Weld control: MPS 10 (5-times, 8-program) --- Extra Equipment: - doppel foot pedal "currentless contact" - forearm support --- Warranty: 12 months --- Bedpoxl Urcsfx Airodi Spotwelding electrodes + spare parts at stock

Condition: new, Welding electrodes 68 HH UTP, 4 mm diameter, 365 mm long Bsdpfx Asyml Ufeiredi

Condition: excellent (used), 1 x TransPuls Synergic 5000R and 2 x TransPuls Synergic 4000R welding machines. Bdodpfx Aiotkuyisrei Attention: the price is only for one welding machine

Condition: reconditioned (used), functionality: fully functional, total width: 620 mm, total length: 1,450 mm, Cleaning and welding line URBAN- AKS 1610+TBA+SV 530/WT 530 Operating direction: right to left. The entire line is 6200 mm wide and 14500 mm long. AKS 1610: weld bead limitation 0.2 mm - Horizontal 4-head welding machine for vinyl window profiles at a 90º angle. - Equipped with an integrated discharge system for conveying to cleaning machines. - Electronic positioning. - SPS central control with keyboard and display. - PLL parallel welding system – as standard, increases corner strength by up to 20%. - Dimensions of welded elements: min. 410 x 370 mm (width X height Y) max. 3500 x 2300 mm (width X height Y) - Equipped with a gasket moulding system for 4 welding heads. TBA Conveyor table (between welder and cleaning machine) - Width 2600 mm, length 3500 mm, 8 guide rails. Driven, for automatic production lines. Electrically-driven conveyor table, transport belts with velour or super grip coating. Linking of several conveyor tables is possible. SV 530 CNC corner cleaning machine - Up to 17 tooling locations. - 2 axes. - PC with freely programmable CNC control, programmed on screen. - Simple programming of machining steps in group mode, single program selection, list, or automatic. - User-friendly diagnosis and service routine. Standard equipment: - Inner frame stop - 2x cutting/grooving knife unit NO/NU - 1x disc cutter with a saw blade 5mm (SF) - 2x inside grooving knife unit IO/IU Profile height: min. 30mm, max. 130mm/200mm Profile width: min. 20mm, max. 150mm Bdodpfxjrunl Ho Airei Inner frame dimension: 210mm x 210mm Incl. turning device WT-530 Dimensions: width: 6200 mm, length: 14500 mm Completely refurbished, 6-month warranty on parts. Ready for operation. Available for inspection at the company's headquarters.

Condition: new, Year of construction: 2025, Butt Welding Machine Technical Specifications: Bsdpstwfv Defx Airjdi Model: KAB10 CE certified Operated: Foot Power at 50% ED 10kVA, Continuous power 7.1kVA Welding Capacity: Up to 8mm + 8mm mild steel wire Primary winding: Copper wire Secondary winding: Copper bar Core: Silicon steel EI core Mains Connection: 400V/50Hz Power Input Cable: 3m Protection Class: IP21 Space Requirement (W/L/H): 625mm x 600mm x 1035mm Weight: 90Kg Warranty: 1 years (+10 years spare parts support)

Condition: good (used), Year of construction: 1985, Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-action spot welding machine -Manufacturer: Tecna, Spot welding machine: Type 4161 Bsdpjk Aubxsfx Airsdi -Rated power: 31 kVA -Operation: via foot pedal -Dimensions: 780/250/H1500 mm -Weight: approx. 130 kg

Condition: excellent (used), Manufacturer: R+D Custom Automation Type of equipment: Semi-automatic assembly and ultrasonic welding machine Application: Production of medical bags and tubes Serial number: 19-11231 Supply voltage: 240 V AC Supply frequency: 60 Hz Number of phases: 1 Rated current (Full Load Amps): 20 A Maximum motor power (Max H.P.): N/A Compressed air requirement: 1 CFM at 90 psi Bedpfx Aisznvfijredi SCCR (Short Circuit Current Rating): 300 kA RMS Enclosure type: NEMA 12 Drawing number: D-11030-2-02

Condition: new, throat depth: 500 mm, – Capacity 35 kVA – Pneumatic – Throat depth 500 mm Bsdpfxox N Nfuo Airsdi – PX1700ECO control – Documentation – 400V

Condition: new, Year of construction: 2025, Spot Welding Machine Type KPP90 CE certified Operated: Pneumatic Required Air Pressure: 8 bar Power at 50% ED 90kVA, Continuous power 63,5kVA Welding Capacity: 5+5mm steel sheet Water-cooled Transformer Construction: Bdedpfx Aeuy U E Heirei Primary winding: Copper wire Secondary winding: Copper bar Core: Silicon steel EI core Epoxy resin coated transformer. Electrode Force Adjustable: 305-610daN Mains Connection: 400V/50Hz Protection Fuse: 200A Power Level: %0-99 power adjustable by digital microcontroller Weld Time: 1-99 Cycle (20ms - 2s) adjustable by digital microcontroller Arm Length: 550mm Cooling Water Requirement : 15L/min Power Input Cable: 3m Protection Class: IP21 Space Requirement(W/L/H): 450m x 1500mm x 1750mm Weight: 795Kg Warranty: 1 years (+10 years spare parts support)

Condition: good (used), Gas metal arc welding machine, arc welding system, MIG/MAG welding system, inverter welding machine -Manufacturer: Ess, MIG/MAG gas-shielded welding machine -Type: E1-3300 -Max. welding current: 330 A Bedpjzrt E Uefx Airedi -Features: Water-cooled, remote control -Accessories: Hose assembly, ground cable (see photos) -Dimensions: 1020/520/H980 mm -Weight: 116 kg

Year of construction: 2007, condition: ready for operation (used), Working diameter: 1500-6000mm, working length: 1200-3000mm, wall thickness: 20-70mm. Bdodpfonvfduox Airei

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, lowering unit for ultrasonic welding machines, lowering unit - flatbed, lowering column -Manufacturer: Nucleus, Absen column 35 for ultrasonic welding machines -Eco FR361101 -Servo motor: Dunkermotoren GR 42x40, voltage 24 V -Receiver: Shaft Ø 20 x 18 mm see photo -Number: 4x lowering unit available Bodpfx Aoxzb E Isirjdi -Price: per piece -Dimensions: 250/220/H85 mm -Weight: 2.3 kg/pc.

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, lowering unit for ultrasonic welding machines, lowering unit - flatbed, lowering column -Manufacturer: Nucleus, Absen column 35 for ultrasonic welding machines -Eco FR361101 -Servo motor: Dunkermotoren GR 42x40, voltage 24 V Bodpfxey A Ifte Airodi -Receiver: Shaft Ø 20 x 18 mm see photo -Dimensions: 270/230/H85 mm -Weight: 2.5 kg

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, lowering unit for ultrasonic welding machines, lowering unit - flatbed -Manufacturer: Nucleus, lowering unit - flatbed for ultrasonic welding machines Bedpfjxrz Tajx Airsdi -Eco FR360102 -Servomotor: NuDC42I25R-1000 Voltage 24 V -Number: 5x lowering unit available -Price: per piece -Dimensions: 340/240/H130 mm -Weight: 4.5 kg/pc.

Condition: used, Welding rectifier, electrode welding device, electrode welding machine, electrode welding rectifier -Welding power: max. 300 A -Welding cable with: electrode clamp Bedjd I Szqepfx Airjdi -Ground cable -Number: 1x welding machines available -Price: per piece -Dimensions: 600/1230/H930 mm -Weight: 294 kg

Condition: used, Year of construction: 1960, Technical details: current capacity: 60 kVA throat: 680 mm arm distance: 115 / 415 mm pincer opening adjustable: 180 mm rated capacity: 60 kVA welding power: 71 kVA electrode capacity: 100 bis 600 daN voltage: 380 V / 50 Hz V air pressure: min./max.: 6 / 10 bar Bdjdpfxju Nv Ems Airoi cooling water consumption: 12 l/min weight of the machine approx.: 685 + 200 kg connection voltage: 380 V / 91 A V rated capacity: 60 kVA connected load: 54 kVA dimension L-W-H: ca. Maschine: 1.700 x 850 x 1.750 mm dimension L-W-H: ca. Aggregat: 900 x 650 x 1000 mm POINT WELDING MACHINE - WELDING TRANSFORMER Direct current three-phase welding machine Application: Spot, projection and series spot welding Maximum short-circuit power 89 kVA Primary short-circuit current 135 A Secondary current = short-circuit current: 25 kA and welding current max. 20 kA Electrode stroke max. 90 mm; electrode force min./max.: 100 daN / 600 daN Stroke sequence max. with 10 mm stroke 400 strokes/min. Spot fitting: electrode holder Ø 30 mm, adjustable 180 mm, arm distance = min./max.: 115 / 415 mm 2-fold foot switch Cooling unit, mobile = movable on wheels, connection power 1.45 kW, pipe connection R 3/4 inch, coolant R22 *

Year of construction: 2012, condition: used, Welding machine, plastic welding machine, plastic socket welding machine, plastic welding machine, PE pipe welding machine, plastic pipe welder, socket welding tool set Bdsdpfx Aoqy Rl Hoiroi -Manufacturer: Ritmo, socket welding tool set type R 63 TFE -Voltage: 230V -Power: 1400W -Sleeves: Ø 16 - 63 mm, see photo -Dimension box: 450/350/H130 mm -Weight: 8.4 kg

Condition: used, empty load weight: 10 kg, Voltage: 380 volts. Welding strength: 250 amperes. Weight: 10.5 kg. Multiple units in stock. The machines are used but in good working condition. Price: € 300,- excl. VAT Bdjdpfx Aiozy D Nmsrei

Condition: good (used), TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -without hose package -Max. Welding power: 250 A. Bsdpfx Aijdzwwneredi -Air cooled -Incl. Ground cable -Gas valve -Dimensions: 370/720/H870 mm -Weight: 52 kg