Used Ph Flow Faucet for sale (28)

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,240 h, This Flow Mach M500-2060 was manufactured in 2019. It features a large cutting area of 2000x6000 mm, a programmable Z-axis, and the advanced Dynamix Waterjet XD for precise 2D and 3D cutting. Equipped with a PASER 4 cutting head and a HyperJet 94i-D pump, it ensures high efficiency. Consider the opportunity to buy this Flow Mach M500-2060 waterjet cutting machine. Contact us for more information about this machine. Application Types Cutting Dedpox D Rxpsfx Ad Ijup

Condition: ready for operation (used), Year of construction: 2021, operating hours: 900 h, number of axes: 3, This 3-axis Flow MACH 100-4020 was manufactured in 2021, featuring a cutting area of 4020 × 2020 mm and a cantilever structure. It includes a FlowMaster® license, Flow PASER® 4 cutting head, and a Hyplex Prime 30 pump with a maximum pressure of 4,150 bar. Ideal for abrasive waterjet cutting with less than 800 operating hours. If you are looking to get high-quality cutting capabilities, consider the Flow MACH 100-4020 machine we have for sale. Contact us for more information. • Operating hours: less than 800 hours • First commissioning: September 2021 • Working area: 4020 × 2020 mm (4 m × 2 m) • Design: Cantilever (gooseneck-type) structure • Axes: 3 axes (X, Y, Z) driven by ball screws • Software & control: FlowMaster license included; FlowMaster programming/control installed on the machine control station and an additional customer PC • Abrasive waterjet cutting system: • Cutting head: Flow PASER 4 with high-pressure ON/OFF valve • High-pressure generation: • Pump: Flow Hyplex Prime 30 ultra-high-pressure pump • Maximum pressure: 4,150 bar • Features: High efficiency with integrated autonomous cooling • Workpiece support tank: Heavy-duty painted steel tank, independent from the machine axes Djdpfx Asx Sz A Red Ieup Additional equipment • High-pressure piping kit (from pump to cutting head) • Laser pointer for positioning (red dot for program alignment) • UltraPierce system (abrasive suction/Venturi) for chip-free piercing of sensitive materials (glass, stone, composites, plexiglass) • EcoFlow cutting sludge extraction system with pneumatic diaphragm pumps and hopper for abrasive recovery into a big bag • Flow abrasive feeding system

Condition: good (used), Year of construction: 2015, functionality: fully functional, Manufacturer / Model Manufacturer: Flow (Flow International Corporation) Series: Mach 100 Model (Nameplate): M100-3020 Serial Number (Nameplate): 190030 Wired to DWG: 046990-1 (DWG Rev. Level: N) Assembled by: Kun Ma Country of Origin (Nameplate): Made in China Flow International Corporation, Kent, WA 98032, USA Working Area / Dimensions (Manufacturer Specifications) Base Axis (X): 1.3 m / 3 m / 4 m Gantry (Y): 1.3 m / 2 m Z-Axis Travel: 180 mm Note: For your machine, '3020' typically indicates approx. 3,000 x 2,000 mm (which corresponds to X = 3 m / Y = 2 m from the manufacturer options). Accuracy / Dynamics (Manufacturer Specifications) Linear Axis Accuracy: ± 0.1 mm/m Repeatability: ± 0.06 mm Circularity: ± 0.1 mm Max. Traverse Speed: 10 m/min Acceleration: 0.02 g Electrical / Power (Specific Machine, Nameplate) Power: 6.5 kW Current: 20 A (Field "Current") Voltage / Frequency / Phases: (presumably 3~; voltage appears to be 380 V in the field "Voltage/Frequency/Phases", will confirm 100% upon inspection). High-Pressure Pump Drive (Soft Starter) Description: Soft Starter High Pressure Pump Motor Manufacturer/Type: Danfoss MCD-202 Part No.: A-24416 Revision: A08.2011 Production Date: 07/2019 Serial No.: F0357 0719-WS Line Voltage: 3AC400V Frequency: 50 Hz Power Rating: max. 37 kW Nominal Current: max. 72 A Main Power Supply: max. 80 A Dusdoyri Itepfx Ad Iop Label Note: Flow Europe GmbH, Gutenbergstraße 10, D-64331 Weiterstadt (Germany) Abrasive System / Additional Units Unit: Flow PASER CF900 (Abrasive / Feed Unit) Model: CF900 Serial Number: 190247 Manufacture Date: 04/2019 Electrical Ratings: 100–240 VAC or 24 VDC, Single Phase Frequency: 50/60 Hz FLA: 0.20A240VAC / 0.48A100VAC / 2.00A24VDC LLA: 2.0 A Short Circuit Current: 16.0 A SCCR: 2.5 kA Assembly Number: 1000061-1 Air inlet pressure: 8.6 bar max / 125 PSI max Made in China Manufacturer Specifications – Possible Configurations (Brochure) Maintenance Packages UltraPierce Drilling Aid Splash Guard FlowTexturing (FTT) ecoFlow Abrasive Removal System FlowNest FlowXpert Laser Pointer Clamping and Fixing System Pure Water Retrofit Kit

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, Working area 4000 x 2000 mm Dedpfxjykulne Ad Ijup Cutting power 4000 bar

Condition: excellent (used), Year of construction: 2008, operating hours: 5,357 h, functionality: fully functional, For sale: Complete Flow WMC2-4020 waterjet cutting system equipped with a 60 ksi (4200 bar) high-pressure pump and dual cutting heads. The machine is offered as a fully functional set, ready for operation. Technical details: Model: Flow WMC2-4020 Cutting heads: 2 (dual head configuration) Pump pressure: 60 ksi / 4200 bar Total operating hours: 5,357 h Year of manufacture: The pump and motor are marked with year 2006. Dedpfxoyluu Es Ad Ioup We estimate the machine itself to be from around 2008. Unfortunately, the exact production year cannot be clearly identified from the nameplate. The machine is sold as a complete package, including all components required for operation.

Condition: used, Year of construction: 2019, functionality: fully functional, FLOW Waterjet Mach 200 4020 Construction Year 2019 - fully functional Axis Movement: X-Axis: 4.000 mm Y-Axis: 2.000 mm Z-Axis: 200 mm Ausstattung: - 1x Cutting Head 5-Axis - Flow CAD/CAM Dedpfsygwkxsx Ad Ieup - Abrasive tank - manual pump for tank cleaning - High pressure Flow Hyplex

Condition: excellent (used), Year of construction: 2018, operating hours: 8,869 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 305 mm, type of input current: AC, input voltage: 400 V, table length: 4,100 mm, table width: 2,100 mm, pressure: 6,500 bar, rapid traverse X-axis: 17 m/min, rapid traverse Y-axis: 17 m/min, table height: 900 mm, power: 73.55 kW (100.00 HP), Equipment: safety light barrier, Flow Mach 500 4020 - Material Support Area • X-axis ca. 4.100 mm • Y-axis ca.2.100 mm - Net Cutting Area (2 D) • X-axis ca. 4.000 mm • Y-axis ca. 2.000 mm -Precisions Z-axis, programmable, servo-driven, Z-axis travel 305 mm -Cutting head PASER 4 Dynamic Waterjet XD Technology • Beveling and 3D cuts up to 55˚ without taper • Produces 2D and 3D parts with tight tolerances at high speed • 5-axis kinematic system -Pump Intensifire HyperJet 94i-D • 6.500 bar, 75 kW (100 PS), 4,92 l/min • Closed loop cooler • Pump tool kit -Software FlowMaster + FlowExpert -Material Support System + Catcher tank • Stainless steel construction • Waterlevel control module • Prepared for use with an abrasive removal system • Stainless steel slats as workpiece support - Abrasiv Delivery System PASER CF 900 Duodevvl Ugspfx Ad Iep • Garnet capacity 425 kg - Flow UltraPierce Material Piercing Assist (for composites, glass, stone) -Machine under power, is working -actualy price of new machine with same configuration: 370.000 € -It could be sold the complete still working waterjet job shop company in Poland (real estate, machine park with 3 Flow waterjet cutting systems, base of ca. 160 regular customers, complete company equipment)

Condition: used, Year of construction: 2019, functionality: fully functional, FLOW Waterjet Mach 200 4020 Construction Year 2019 - fully functional Axis Movement: X-Axis: 4.000 mm Dsdpsyfhnrsfx Ad Ijup Y-Axis: 2.000 mm Z-Axis: 200 mm Ausstattung: - 1x Cutting Head 5-Axis - Flow CAD/CAM - Abrasive tank - manual pump for tank cleaning - High pressure Flow Hyplex

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 16/195245, repeat accuracy: 0.025 mm, working range: 3,660 mm, travel distance X-axis: 3,660 mm, travel distance Y-axis: 1,830 mm, travel distance Z-axis: 200 mm, positioning accuracy: 0.025 mm, type of input current: three-phase, input voltage: 400 V, sheet thickness aluminum (max.): 200 mm, table length: 4,000 mm, operating speed: 212 mm/s, table width: 2,000 mm, pressure: 6,000 bar, positioning speed: 12,700 m/min, rapid traverse X-axis: 12,700 m/min, rapid traverse Y-axis: 12,700 m/min, operating pressure: 6,000 bar, cutting speed: 7,620 mm/min, travel speed (max.): 12,700 mm/min, feed length X-axis: 3,660 mm, feed length Y-axis: 1,830 mm, feed length Z-axis: 200 mm, total width: 21,000 mm, feed rate X-axis: 12,700 m/min, feed rate Y-axis: 12,700 m/min, water pressure: 6,000 bar, compressed air connection: 6 bar, pump pressure: 6,000 bar, product height (max.): 200 mm, working length: 3,660 mm, input frequency: 50 Hz, power: 75 kW (101.97 HP), load capacity: 3,200 kg, throat depth: 21,000 mm, FLOW I-6012 IFB – Premium Waterjet Cutting System with 87,000 PSI & Dynamic Waterjet Cut ANY material up to 250 mm thick – with precision down to 0.025 mm. This Flow IFB is not your standard waterjet system. Featuring 87,000 PSI HyperPressure technology and the patented Dynamic Waterjet cutting head, it belongs to the absolute top range of machines. Comparable new systems today cost over €400,000. WHY THIS MACHINE WILL IMMEDIATELY BENEFIT YOUR OPERATION: - 87,000 PSI instead of the usual 60,000 PSI: This translates into 20-50% higher cutting speeds and 30-50% lower abrasive consumption, significantly reducing your unit costs in daily operation. - Dynamic Waterjet with 5-axis kinematics: Automatic compensation for taper and stream lag. Achieve burr-free, taper-free cut edges at 2-4 times the speed of conventional machines – with no need for secondary finishing. - Immediately production-ready after oil change: The system was in regular operation until August 2025. No years of downtime, no hidden damages. Operating hours can be read directly at the control unit during inspection. - Large cutting area 1,830 x 3,660 mm: Process large sheets, plates, and components without repositioning. Ideal for contract manufacturing, metal fabrication, stone processing, and prototyping. - Siemens Sinumerik 840D: Industry-standard control system. Your operators are familiar with the interface, and spare parts and support are available long-term. TECHNICAL DATA: Manufacturer: Flow International Corporation (USA) Model: I-6012 IFB (Integrated Flying Bridge) Year: 2007 Serial No.: 2006353W-044 Cutting range: 1,830 x 3,660 mm Z-axis: 200 mm Table size: 2,000 x 4,000 mm Table type: slat table with water catch basin Pump: Flow HyperJet Model 7X Intensifier Dujdjyl S Nyjpfx Ad Iop Operating pressure: 87,000 PSI (6,000 bar) Motor: 100 HP (75 kW) Power supply: 400V / 3-phase / 50 Hz Cutting head: PASER ECL Plus with Dynamic Waterjet Axes: 5 axes (+/- 10° articulation) Height sensor: automatic Accuracy: +/- 0.025 mm Repeatability: +/- 0.025 mm Max. traverse speed: 12,700 mm/min Max. cutting speed: 7,620 mm/min Controller: Siemens Sinumerik 840D Software: FlowMaster / FlowPath CONDITION: The machine is stored dry and protected in a hall. All components are complete. There is no visible damage or corrosion. An oil change is required prior to recommissioning. Operating hours can be read directly at the Sinumerik control during inspection. SCOPE OF DELIVERY: - Complete Flow I-6012 IFB waterjet cutting system - 87K PSI HyperJet intensifier pump with 100 HP motor - Dynamic Waterjet cutting head (5-axis, PASER ECL Plus) - Siemens Sinumerik 840D control with PC operator station - Complete abrasive delivery system - Slat table with catch basin - Complete electrical cabinets - Spare parts on pallet (high-pressure hose, various components) - 8 original manuals (German/English) Overhead crane available for loading on site. Inspection possible at any time by appointment.

Condition: used, Year of construction: 2003, operating hours: 4,428 h, Price: On request Duodpownidhofx Ad Iep - Year: 2003 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Operating hours: 4428 - Drive system: CNC - Control system brand: Siemens - Power [kW]: 37.0 - Operating pressure [bar]: 4137 - X-axis travel [mm]: 6500 - Y-axis travel [mm]: 3300 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 1988, condition: ready for operation (used), A powder tower system, a chimney and a burner for the food industry or the milk processing industry, in particular for the production and drying of milk powder or similar products, are available. 1) Tall form dryer SPX Flow APV, type II K, year of construction: 1988, water evaporation capacity: 1000kg/h, products: MPC 80/MPC 85/WPC 60/MCN 85. Components of the powder tower system: drying tower, two collecting cyclones with rotary conveyors, feed cyclone, buffer tanks, lift inlet preheater, homogenizer, vibration filter, control cabinet with frame construction and two atomizer and nozzle systems. 2) Steel chimney Fűtőker, year of construction: 2022, diameter 1/2: 800mm/600mm, height: 20500mm. 3) Weishaupt WM-G20/3-A burner, year of construction: 2014, documentation available. On-site inspection is possible. Dsdpfx Aovmq Tied Isup

Year of construction: 2023, condition: new, functionality: fully functional, machine/vehicle number: B1JAU25/95, DN400 Ball Valve Assembly + Pneumatic Actuator (Valmet / Neles) 1) Description Manufacturer: Valmet Flow Control (Neles brand) Valve: M1JW400ASGA – Trunnion-mounted ball valve, PN10, DN400, body CF8M (AISI 316), graphite packing Actuator: B1JAU25/95 – Single-acting pneumatic actuator (spring to open), ISO 5211 / VDI/VDE interface, size 25, shaft bore Ø95 mm Mounting Plate: QX35K05HDM – Neles interface for valve/actuator coupling Year: 2023 Condition: New / never installed, stored in original wooden crate (photos available) Compliance: CE marking (ATEX if applicable to control accessories – see nameplate) 2) Construction & Materials Dusdpfxsyhxpps Ad Isp Body: Stainless steel casting 1.4408 / CF8M Type: Trunnion-mounted quarter-turn ball valve (low operating torque, low ΔP) Seats / Packing: Graphite (for severe service, high temperature resistance, low friction) Flanges: industrial drilling (details available on request) 3) Performance (indicative / to be confirmed by serial datasheet) PN: 10 (body marked PN16 on associated part; can be delivered as PN10) Nominal diameter: DN400 Service: industrial fluids, air/gas, low-pressure steam, chemical/energy process, heavy-duty HVAC Mounting: single-acting actuator (spring fail-safe → opens in case of air supply failure) 4) Scope of Supply Complete pre-assembled valve with B1JAU25/95 actuator QX35K05HDM mounting plate Control block (solenoid valve/filtration/regulation) visible in the photo Wooden crate + protective materials 5) Applications Compressed air units / boosters (line isolation/bypass) Industrial processes (chemicals, energy, paper mills, incinerators, cement plants) Large flow industrial HVAC networks

Condition: used, Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -Material: 1.4408 stainless steel -without: drive Dodpfx Aedki Rtsd Isup -Connection: DN50 -Width: 152 mm -Nominal pressure: PN40 -Number: 1x valves available -Price: per piece -Weight: 9.69 kg/piece

Condition: used, SincoTec Model: POWER FLOW BIAXIAL 125/150 kN ±4000 Nm SincoTec POWER FLOW BIAXIAL 125/150 kN – ±4000 Nm Servo-hydraulic Test Stand Description: For sale is a servo-hydraulic biaxial test stand SincoTec POWER FLOW BIAXIAL. The unit has been used in an industrial environment and was fully functional up to decommissioning. All service and maintenance were professionally performed. Comprehensive technical documentation (operating, assembly, and wiring manuals) is available. Dsdpfxjx H Rtno Ad Ioup The test stand is suitable for tensile/compression tests, torsion tests, and combined loading tests on components and assemblies, e.g. for fatigue, durability, and functional testing. Main technical data for the test stand: - Maximum test force (design): up to ±150 kN - Typical operating rating: 125 kN - Max. torque (torsion): ± 4,000 Nm - Max. linear cylinder stroke: ± 75 mm - Max. rotation angle: ± 50° - Measurement accuracy: Class 1 (DIN EN 10002-3) Test stand dimensions: - Total height: approx. 3,430 mm - Width: approx. 1,480 mm - Depth: approx. 1,180 mm - Max. weight of clamping fixture: 250 kg Hydraulic power unit (included) - Drive power: approx. 152 kW - Flow rate: approx. 260 l/min - Operating pressure: up to 280 bar - Hydraulic oil: HLP ISO VG 46 - Tank capacity: approx. 1,500 liters Power unit dimensions: - Length: approx. 2,714 mm - Width: approx. 1,820 mm - Height: approx. 2,085 mm Electrical data: Control cabinet / test stand - 400 V / 50 Hz - Connection: CEE 5-pin - Fusing: 16 A Hydraulic power unit - 400 V / 50 Hz three-phase current - Direct connection - Fusing: approx. 160 A Scope of delivery: - SincoTec POWER FLOW BIAXIAL servo-hydraulic test stand - Hydraulic power unit - Control cabinet with industrial PC - Measurement and control technology - Technical documentation The machine is structurally rated for up to 150 kN. The 125 kN specification refers to the typical operational configuration. Test stand weight: approx. 4.7 t Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (see photo) (Specifications subject to change and errors excepted!) Further questions can be answered by phone.

Condition: used, functionality: fully functional, Good working condition. Please check out our other listings as well. Duedpfx Aoupx E Uod Iep

Condition: used, functionality: fully functional, Flow Cabinet/Safety Cabinet. Duedpfx Aoupx E Iod Iop Good working condition. Please check out our other listings as well.

Condition: excellent (used), Year of construction: 2021, operating hours: 144 h, I will sell a water-abrasive jet cutting machine from Flow. Model Mach 100 The machine has worked 144 working hours The machine has been checked and valued by an expert from FLOW Cutting area 3x2 meters. The machine is in very good technical condition - used occasionally for own production, has only worked hours. Less than 2 tons of garnet processed. The machine is currently running and fully ready to work, it is possible to fully test it before purchase. In I have many spare parts for the device: - mixing tubes. - diamond orifices - mixing bodies - large service kit for the pump (major kit) - head covers The device has an attachment for piercing brittle materials such as glass, ceramics. Working area: Z-axis feed: 178mm Net cutting area X-axis min. 3,000 mm Y axis min. 2,000 mm Machine accuracy: On linear axis at 20 °C +/- 3 °C - linear positioning accuracy of X and Y axes: +/- 0.10 mm/m - repeatability of X and Y axes: +/- 0.06 mm (complete working area) Circularity test: : +/- 0.013mm Machine speed - Technological speed up to 10 m/min - Maximum shape speed: up to 5 m/min - Acceleration 0.05 g Light gate The light gate prevents entry into the front, rear and side of the machine in cutting mode. - FlowMaster PC control - Simple and logical user interface - user-friendly menu structure based on pictograms - unique creation of a cutting path with the possibility of modification with automatic generation of inputs and outputs and travel routes. Dodpfxsurv Nvo Ad Isup - exclusive SmartStream technology - Every beginner becomes a professional - Ensures high-quality parts - Dynamic language switching: operators can work with the software interface in the language of their choice without having to restart the program - Context-sensitive tool tips and integrated Help function - Simple and fast definition of edge surface quality - Feed potentiometer from 0 to 125% - Automatic calculation of working times - PASER 4 cutting head - Paser 4 abrasive metering system - Paser CF900 abrasive storage and transport system - Flow HyPlex prime 30 ultra-high pressure pump - Flow UltraPierce piercing system - Technical specifications: - Designed for 4150 bar - 3800 bar continuous working pressure - 22 kW (30 HP) motor power - Maximum water flow 3.1 l/min - Maximum temperature at inlet 21°C - Air pressure 6.2 -8.3 bar - Mains voltage 400V, 50 Hz, 3 phases - Dimensions (W x D x H): approx. 1,524 x 914 x 1,033mm - Weight: approx. 850 kg - HyPlex Prime pump cover - HyPlex Prime hydraulic pump tool kit - HyPlex Prime tool kit - High-altitude piping package In addition, you can buy the device - Polish manufacturer Airpol modek k5 compressor, power 5.5kW - DSsystem pneumatic lift with 10 suction nozzles and sheet metal peeling system, lifting capacity 1 ton - Wiessmann water treatment plant

Condition: ready for operation (used), Year of construction: 2010, operating hours: 9,000 h, functionality: fully functional, machine/vehicle number: 714000-1, type of input current: three-phase, input voltage: 400 V, table length: 7,000 mm, table width: 2,000 mm, power: 36.77 kW (49.99 HP), Flow Waterjet 714000-1 Flying Bridge 7x2 meters Year of manufacture: 2010 60,000 PSI 9,000 hours Complete and in good working condition Various wear parts such as pipes and extra nozzles Abrasive hopper Abrasive feeder Immediately available Duedpfoxwtu Tex Ad Iep Waterjet cutter Flow Waterjet Flowcut Waterjet cutting OMAX CNC plasma Hypertherm Laser fiber laser bystronic Amada Trumpf Accurl Bodor HSG JQ Nukon

Condition: good (used), Year of construction: 2013, operating hours: 18,600 h, functionality: fully functional, water pressure: 4,000 bar, Waterjet FLOW MACH 3 Year of production: 2013 Working area: 3000x2000 Djdpfxowmcmte Ad Ioup Working hours: 18600 Advantage of the machine DWJ - automatic compensation of the verticality of the cut Availability: 6 months Location: Croatia Parity: EXW Belišće

Condition: excellent (used), Year of construction: 2018, operating hours: 11,066 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 305 mm, type of input current: AC, input voltage: 400 V, table length: 4,100 mm, table width: 2,100 mm, pressure: 4,150 bar, rapid traverse X-axis: 17 m/min, rapid traverse Y-axis: 17 m/min, table height: 900 mm, power: 37 kW (50.31 HP), Equipment: safety light barrier, Flow Mach 500 4020 - Material Support Area • X-axis ca. 4.100 mm • Y-axis ca.2.100 mm - Net Cutting Area (2 D) • X-axis ca. 4.000 mm • Y-axis ca. 2.000 mm -Precisions Z-axis, programmable, servo-driven, Z-axis travel 305 mm -Cutting head PASER 4 Dynamic Waterjet Technology • Produces 2D parts with tight tolerances at high speeds • 5-axis kinematic system -Pump Intensifire UltraJet 60i-S • 4.150 bar, 37 kW (50 PS), 3,8 l/min • Closed loop cooler • Pump tool kit -Software FlowMaster -Material Support System + Catcher tank • Stainless steel construction • Waterlevel control module • Prepared for use with an abrasive removal system • Stainless steel slats as workpiece support - Abrasiv Delivery System PASER CF 900 • Garnet capacity 425 kg - Flow UltraPierce Material Piercing Assist (for composites, glass, stone) -Machine under power, is working Dodpfx Ajvvmi Esd Ioup -actualy price of new machine with same configuration: 304.000 € -It could be sold the complete still working waterjet job shop company in Poland (real estate, machine park with 3 Flow waterjet cutting systems, base of ca. 160 regular customers, complete company equipment)

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, SPX Flow Spraydrier - we have been using it for drying fresh water algae into powder. The machine is fully functional and working well. Dujdpfxjxv A I Hj Ad Iep

Condition: as good as new (ex-display), Year of construction: 2023, Short & sweet Base axis (X) : 1.3-2 mm Djdpfjhw Nfqsx Ad Isup Cantilever (Y) : 1.3-4 mm Accuracy : 0.06 mm Technical data Linear axis accuracy : ± 0.1 mm/m Maximum travel speed : 10 m/min Acceleration : 0.02 g Repeat accuracy : ± 0.06 mm Circularity : ± 0.1 mm Z-axis stroke : 180 mm Base axis (X) : 1.3 m, 3 m, 4 m Extension arm (Y) : 1.3 m, 2 m Equipment and accessories Maintenance packages UltraPierce tapping aid1 Splash guard1 FlowTexturing (FTT) Abrasive de-sludging system ecoFlow FlowNest* FlowXpert* Laser pointer Clamping and tensioning system Clean water conversion kit * Required for FlowTexturing

Condition: new, Year of construction: 2025, functionality: fully functional, The EchoJet is the first of its kind, fully enclosed waterjet solution designed to improve operator efficiency while protecting the surrounding environment from water and abrasive. This enclosed, compact design mirrors the traditional machine tool look and feel, with the flexibility to cut virtually any material, and shape. The system touts a unique gantry design that optimizes the work envelope. Highlights include:  Fully integrated enclosure offers quite, clean operation  Unique gantry design offers excellent worktable accessibility while providing fast and precise motion  Leading industry drives, motors, and electrical system coupled with Flow’s ultrahigh-pressure technology Duodpfxov Szxmo Ad Iop  Built-in interior enclosure lights enhance visibility and safety  All machine components controlled by convenient roll-around operating console that easily spans the entire work envelope  Industrial PC provides fast and powerful operation in environments up to 55°C with full IP66 spray protection  Laser calibrated at factory and dynamically ball bar tested at customer facility to ensure accuracy standards are validated  One-piece construction and compact size provides ultimate floor space savings, quick installation to get you running quickly, and can easily be moved around later.

Condition: new, Year of construction: 2023, functionality: fully functional, The Mach 100 waterjet cutting system is a reliable and versatile cutting solution that allows you to expand your production with minimal investment. Equipped with the same core Flow components as our premium waterjet cutting systems, the Mach 100 offers you the versatility and added value you need to start your production, backed by comprehensive service and support. Whether you're looking to expand your capacity in series production or prototyping, or enter the waterjet business, the Mach 100 is the key to success. Dusdpfx Adjv Szq Ae Iop

Condition: not inspected (used), Year of construction: 1994, operating hours: 41,564 h, functionality: unexamined, (Pictures are condition) Optional purchase: Current condition = 12.500 € Duodsguqucjpfx Ad Ijp Liability excluded - spare parts, service and maintenance can be offered Overhauled condition = 13.500 € Check of the Intensifier 3 months warranty (not on spare and wear parts) Renewed condition = € 17,999 (refurbish) 12 months warranty (not on spare and wear parts) New pressure intensifier, new control unit, new HP pump, hydraulics cleaned and checked. we offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!