Used Electroplating Bath for sale (420)

Condition: used, This listing is for the Thermo Haake SC100 Water Bath + Immersion Circulator. The unit is in full working condition and ready for immediate use. Fodpfxey H Dlqs Aatspl Thermostatic water bath with integrated immersion circulator, designed for accurate temperature control in research and industrial labs. Ideal for sample incubation, heating, and fluid temperature regulation. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: used, Year of construction: 2010, operating hours: 2,000 h, functionality: limited functionality, machine/vehicle number: ERW20101111, overall weight: 5,000 kg, wall material: steel, Cleaning line in good visual condition for sale. Specifics: Baths: 10x Bath dimensions(outer size): L2440xW590xH1190mm Additional stainless-steel baths: 2x Stainless-steel bath dimensions(size inner): L600xW600xH700mm Ventilation inlets for toxic fumes(between baths): 4x Control unit: 1x Crane with electric motor(in working condition): 1x Fpodpfjxvxqdjx Aatjl Rails in working condition: 2x Guarding rail with steps: 8119x1000mm Water filter tanks: 2x Combined weight: 5t+ Additional: PVC pipes, stainless-steel mesh, circulation pumps, etc. Overall cleaning line length when assembled: 12050mm Overall cleaning line width when assembled: 4160mm Assembled drawings available. Cleaning line is and was purchased in non-operational state. Located in Latvia. Currently in disassembled condition - as is. Logistics are handled by potential buyer!

Condition: used, General Description: This listing is for the Grant Instruments TXF200 Circulating Bath. The unit is in full working condition and ready for immediate use. This high-specification stirred thermostatic bath offers precise temperature control and an intuitive digital interface. Designed for versatility, it supports both internal and external circulation, making it ideal for calibration, cooling, and general laboratory heating tasks. Fedpfx Asyw Nicoatepl Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) • Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: used, functionality: unexamined, machine/vehicle number: 10110746, Used Julabo ED F12 circulation bath with chiller/heater functionality Manufacturer: Julabo Labortechnik Gmbh Model: ED F12 Fsdpoyvrkmjfx Aatepl Voltage: 190-253V (50Hz) (230V) Refrigerant: R134a

Condition: new, functionality: fully functional, BULK LOT – tesa NOOBLESSE Bathroom Accessories Set – Retail Value €1,350,000 For sale is a bulk lot consisting of approximately 22,500 bathroom accessory items from the tesa NOOBLESSE range. This offer is ideal for wholesalers, resellers, retailers and larger projects. The lot includes eight different products with a total retail value of approximately €1.35 million. Fsdpfsznk H Iex Aatopl * Easy installation without drilling thanks to the patented tesa Power Kit mounting system * No damage to walls or tiles – also ideal for rented properties * Strong hold and high load capacity – suitable for tiles, glass, metal, marble, wood and many plastics * Removable without leaving residue – the accessories can be detached when required * High-quality materials – brushed stainless steel combined with satin-finished glass, rust-resistant and durable * Timeless and elegant design – modern appearance suitable for a wide range of bathroom interiors * Wide product selection – accessories for towels, soap, toilet paper and more * Sustainable solution – reusable mounting system with separately available adhesive kits ## Products Included in the Lot * tesa NOOBLESSE double towel holder 40481 – approximately 6,200 units * tesa NOOBLESSE soap dispenser 40487 – approximately 700 units * tesa NOOBLESSE toilet brush 40480 – approximately 2,300 units * tesa NOOBLESSE towel rail 40484 – approximately 2,000 units * tesa NOOBLESSE toothbrush tumbler 40488 – approximately 3,600 units * tesa NOOBLESSE towel rail 40485 – approximately 3,400 units * tesa NOOBLESSE toilet paper holder 40479 – approximately 2,000 units * tesa NOOBLESSE towel holder 40303 – approximately 2,000 units The complete stock, including the respective quantities, is listed in the images. The purchase of individual partial quantities is also possible. Additional pictures and videos are available upon request. Now is the right time to expand your product range. Secure this exclusive wholesale offer of tesa NOOBLESSE bathroom accessories while stocks last. Contact us today for further information. Benefit from a strong brand, increase your sales and offer your customers high-quality solutions for modern bathroom design with tesa NOOBLESSE.

Year of construction: 2018, condition: excellent (used), DYCOMETAL CRT2VT-180 Ice Water Immersion Chamber / Thermal Shock Test Chamber Manufacturer: DYCOMETAL Equipos Control Calidad, S.L. Type: CRT2VT-180 Year of manufacture: 2018 Machine type: Thermal shock test chamber / Ice water immersion chamber Test volume / model class: approx. 180 liters For sale is a used DYCOMETAL CRT2VT-180 thermal shock test chamber with a combined hot air / water bath testing system. The system is used to perform rapid thermal shock tests. The test specimen is placed on a pneumatically movable test specimen carrier (cradle), heated in the upper hot air zone, and then immersed in the lower, temperature-controlled water bath. The rapid change between the hot air zone and the water bath subjects components, assemblies, and materials to significant thermal stress. The change can be carried out manually or via a programmed sequence; the immersion depth is adjustable. Technical data: Model: CRT2VT-180 Year of manufacture: 2018 Protection class: IP22 Temperature range: 0 °C to +200 °C Testing system: Hot air / water bath system Upper zone: Hot air testing area Lower zone: Temperature-controlled water / immersion bath Test specimen carrier: Pneumatic cradle Max. controlled travel: approx. 500 mm Operating modes: Manual / Automatic Water bath / cooling system: Temperature-controlled immersion bath Automatic water level monitoring Water inlet / water outlet Integrated water circuit with circulation pump Refrigerant: R134a / 3.4 kg GWP: 1,430 CO₂ equivalent: 4.86 t Electrical data: Mains connection: 400 V / 3N~PE / 50 Hz Connected load: 5.32 kW Current consumption: 11.51 A Control / equipment: EUROTHERM 2604 program controller Manual / automatic test operation PLC control Ethernet communication Anybus Modbus gateway Eaton easy controller EUROTHERM iTools software Pneumatic test specimen carrier / cradle Adjustable immersion depth Stainless steel interior Circulation fans Observation window / test chamber lighting Emergency stop / alarm and safety system Documentation and software as shown in the pictures Application areas: Thermal shock and ice water immersion testing Thermal cyclic stress Electronics and automotive components Sensors and control units Material and component testing Quality assurance / research and development Reliability testing Dimensions / transport data: Internal dimensions (L × W × H): approx. 650 × 650 × 450 mm External dimensions (L × W × H): approx. 1,800 × 1,250 × 2,320 mm Additional height of pneumatic lifting cylinder: approx. 1,500 mm Total height including lifting cylinder: approx. 3,820 mm Weight: approx. 810 kg Transport by freight forwarder Condition / scope of delivery: Used – Year of manufacture 2018 Optical condition as shown in the pictures. DYCOMETAL CRT2VT-180 Fpsdpfszzbwwjx Aatol EUROTHERM 2604 controller Software and documentation as shown in the pictures Accessories as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to change, errors and prior sale.

Condition: good (used), The Buchi R-210 Rotavapor with B-491 Heating Bath offers you a complete solution with vacuum controller, vacuum pump and recirculating chiller all in a small foot-print. Features include: easy to operate, long-life seals for maintenance-free operation, vapour ducting to prevent cross contamination, compact design, maximum safety, and wireless contact on the heating bath. Specifications, Rotavapor: Dimensions 21.65" W x 16.34" D x 22.64" H(55 x 41.5 x 57.5 cm) Weight 35-40 lbs. (16-18 kg.) Power 100-240 V Rotation Speed 20-280 rpm Flask size 50-4000 mL Max Flask Capacity 3kg Specifications, Heating Bath: Dimensions 11.22" W x 11.81" D x 9.45" H (28.5 x 30 x 24 cm) Fedpfx Aaema A Ivotepl Weight 8.82 lbs. (4 kg.) Operating Voltage 100–120 Flask size Up to 4000 mL Controlled Temp Range 20–180°C Temperature Deviation ±2°C Bath Capacity 4 L

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Technical details turning diameter 820 mm turning length 6000 mm control Siemens Si 840 D sl max. workpiece weight between centres 4000 kg total power requirement 155 kW weight of the machine ca. 65 t dimensions of the machine ca. 16350 x 3700 x 3850 m Additional information Original purchase price in 2019: EUR 1.550.000,- Time recording from Feb. 2025 Operating hours = 38601 h Main spindle = 1958 h Milling spindle = 1760 h CNC control Si 840D sl Working area 6000 mm Working height 1390 mm Swing diameter over bed slide/bed 820 mm X-axis travel +850 -25 mm Z-axis travel 6820 mm C-axis, smallest increment +/-0.001° Workpiece spindle Spindle head according to DIN 55026 A15 Bathing through 160 mm Front diameter Bearing 240mm 2-stage gearbox, infinitely variable programmable Drive power at 100/60% duty cycle: 78/87kW Speed ranges: 2 Speed range I: 10-501 rpm Speed range II: 10-1750 rpm Torque I, 60% duty cycle: 8000 Nm Torque II, 60% duty cycle: 2308 Nm C-axis Holding torque with backlash-free spindle brake: 3000 Nm Speed: 0-50 rpm Maximum torque (100/60% duty cycle): 3700/4430 Nm Steady rest clamping range: 70-425 mm Turning, drilling, milling head Tool taper Capto C8 Tool magazine Storage locations: 2 magazines, Baluff chip system Max. tool diameter (each position/every 2nd position) 125/200mm Max. tool length 600mm Tool weight 25kg Tailstock Quick diameter 180mm Stroke 170mm Internal taper MK6 Axially force, manually adjustable 5-30 kN Quick tip height adjustment +/-0.15mm Other: Fpjdpfxezuygdo Aatjl Collision monitoring sensor ACS 3-ARTIS Chip conveyor system Coolant system 980l tank and more

Condition: used, The unit is in full working condition and is ready for immediate release A Julabo ED bath is a laboratory circulating water bath system that combines a bath tank with an immersion circulator for controlled heating and circulation of liquids. These units are commonly used to maintain samples or materials at a stable, set temperature in a lab environment. Typical Applications Fpjdoy Iwz Ijpfx Aatsl These baths are widely used in labs for tasks such as: Temperature control of samples during incubation, testing, or reactions Material testing (e.g., plastics, metals) Calibration of thermometers or thermal devices Heat treatment in research and quality control contexts What do E nd D stand for? E suggests an open bath with circulator mounted on a bridge — the immersion circulator sits on top of the bath tank and drives both heating and fluid movement. D designates the controller simplicity level (digital setpoint via keypad with PID temperature control)

Condition: excellent (used), Year of construction: 2002, Marini-Ermont RB 160 Mobile Asphalt Mixing Plant Year of manufacture: 2002 Capacity: 160 t/h Type: batch Mix - Mixing unit as a semi-trailer - Drying drum as a semi-trailer - Feed hopper as a semi-trailer Fsdpfxsym Drve Aatopl - External material silo - Loading silo approx. 25 m³

Condition: used, This listing is for the Grant JB Academy 6005 Water Bath Fpedpsy Iw Eyefx Aatel The unit is in full working condition and is ready for immediate use Grant Instruments JB Academy range of digital unstirred water baths — basic laboratory water baths designed for heating and maintaining liquids at controlled temperatures. They’re often used in teaching labs, research settings, schools and colleges where a simple, reliable water heating bath is needed.

Condition: excellent (used), Julabo Julabo Transparent Circulating Bath Thermostat CT 72/P incl. ED Thermostat Item Description: For sale is a Julabo transparent circulating bath thermostat CT 72/P with Julabo ED (v2) temperature controller. This unit comes from a laboratory inventory and is in used but technically fully functional condition. The bath heats and controls temperature accurately and stably, and circulation is present (see photos). Ideal for laboratory, industrial, educational, testing, or development applications. Technical Data (excerpt) Manufacturer: Julabo Labortechnik GmbH (Made in Germany) Model: CT 72/P with ED thermostat (v2) Bath temperature range: approx. +10 °C to +60 °C Temperature stability: ±0.02 K Heating capacity: 2000 W at 230 V Circulation pump: Flow rate approx. 15 l/min Bath volume: approx. 18 liters Bath material: Acrylic glass / stainless steel Fedpfozix Dqsx Aatspl Interface: RS232 Power supply: 190–253 V / 50–60 Hz Protection class: I / IP20 Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see photo) (Specifications and data are subject to change and errors!) If you have any further questions, we will be happy to answer them by phone.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, overall weight: 12,000 kg, input voltage: 415 V, input current: 70 A, input frequency: 50 Hz, Complete 2010 Rademaker Pie Line, capable of producing up to 5,280 filled savoury pies (with lids) per hour. Manufacturer - Rademaker B.V. Maximum mechanical speed – up to 22 strokes / minute. Output capacity – up to 5,280 pies / hour. Electrical requirements – 415 V / 50 hz / 3 phase. Power – 70 Amps (approx.). Weight of complete line – 12,000 kg. Fsdpszvmy Hofx Aatepl This production line comprises of the following equipment/machinery: 1. 2 x sets of tooling complete with trollies, one set for pies with casing diameter of 110mm. 2. Electrical control panel (with data plate ‘PIE LINE’ on). 3. Inclined flighted conveyor for loading of pastry sheets. 4. Overhead transfer conveyor (used to feed 'STRIPFEEDER') operating at 2.4m high along the length of the line. 5. Rademaker ‘STRIPFEEDER’ with denester for dropping pie cases. 6. Rademaker Tamping unit 1 (used to tamp the dough round into the pie casing). 7. Rademaker ‘DEPOSITOR’ 6-lane depositing system with hopper and pump. 8. Rademaker ‘TAMPING UNIT’ 2 for tamping filling down into casings. 9. Rademaker ‘LID DOUGH CONVEYOR’ for dropping lids onto filled pies. 10. Dutch Thermal Engineering b.v. (DTE) V-009.0 thermostat for regulating temperature of water bath sat under main conveyor holding pie casings. 11. Rademaker Crimping unit / marking unit for putting pattern into casing lid and ensuring it is secured onto pie. 12. Rademaker Pie exit/discharge conveyor. 13. Rademaker ‘DOUGH RETURN SYSTEM’ for excess pastry. 14. Rademaker ‘SPOT DEPOSITOR’ for 5-across over line depositing. 15. Unnamed egg-glaze mixing vessel and pump, mounted on mobile frame. NOTES – BUYER TO REMOVE FROM SITE.

Year of construction: 2019, condition: like new (used), Complete Ilapak weighing and bagging system. Includes a vibration feeding. incline flighted belt conveyor. 10 head multihued weigher with 2.5 litre s/s buckets. Vegatronic 500 with 300mm jaws with plc for pre printed film. Markum printer and out feed conveyor. Fpodpeywi Daefx Aatol

Year of construction: 2017, condition: good (used), We are selling our etching system for magnesium and zinc, consisting of: - STOMA Etching Machine E-90L - STOMA Developing Machine 18 L - STOMA Preparation & Pre-treatment Tank - STOMA Exhaust Hood 90 L All components were purchased new in 2017. Fjdoy H D Acepfx Aatepl The STOMA ECOLINE etching machines are largely constructed from V2A-grade stainless steel. The machine enclosure is bolted. ECOLINE etching machines are equipped with a separate freestanding control panel for increased flexibility. A powerful AC drive motor ensures reliable operation. The machines are supplied without factory-installed extraction or a fan. Standard configuration includes a connection for direct water cooling. Bath volume: 90L, Max. plate size: 50 x 65 cm, Weight: 450 kg, Dimensions (LxWxH): 1315 x 1430 x 1310 mm. - Suitable for magnesium and/or zinc - Maximum plate format: 50 x 65 cm - Bath volume approx. 90L - Mains voltage: 3 x 400V - Total space required: approx. 2 x 2.5 m STOMA Preparation Tank - Maximum plate format: 50 x 65 cm - Water connection: R ½" - Footprint: 200 x 95 cm - Drain pipe diameter: 50 mm STOMA Developing Machine 18L - Maximum plate format: 50 x 65 cm - Approx. 18 L

Condition: like new (used), Year of construction: 2020, operating hours: 500 h, Cubixx 120 is the workhorse amongst the semiautomatic multipurpose dicers. ONLY RUN FOR 500 HOURS With its high flexibility and powerful capacity, it handles loose as well as pre-formed products, such as meat, cased products, sausage and cheese. The ideal performer for industrial food processing applications. Fully sealed product loading chamber with open hygiene drainages Lateral pre-pressing and chamber closingby sidewall Product pre-loading chamber Integrated discharge conveyor THC-system* Adjustable blade speed Touchscreen Two-part cutting grid Hardened shear edges and product stabilizers Simple and safe 4-point grid fixation Intelligent automatic slice speed control Fodpfx Asxu N Htjatepl

Condition: used, Year of construction: 2014, functionality: limited functionality, machine/vehicle number: 10257-1, Technical characteristics: # Payload Capacity: Basket size 670 x 480 x 300 # Tank capacity: 3 tanks x 2300 L # Washing chamber capacity: 1100 L # Ultrasonic equipment: 4000W, 25kHz # Average load weight approx. 100 kg; maximum 150 kg # Machine weight: 6000 kg Electrical Equipment # Operating voltage: 400Vx3 # Connected load: 80 kVA / rated current 152A Dimensions # Machine dimensions (L×W×H): 2000 × 2850 (With Sonowatt 4500) × 2500 mm Fjdpsxwm Dbsfx Aatopl Equipment consists of: # Main machine LPW / Automation conveyor + Ultrasonic SONOWAT unit Machine status: Main machine WORKING – vacuum pump needs replacement (in stock), safety switch on operator panel needs replacement Ultrasonic Sonowat NOT WORKING – ball screw of 2nd rinsing bath worn out

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 20681, The Semmelroth S 50229/2 is a fully automatic, industrial continuous cleaning system in a timed linear design. It was specifically developed for the demanding cleaning of parts and surface preparation of aluminum and cast parts in industrial multi-shift operations. The system is completely made of stainless steel to ensure maximum corrosion resistance and durability when using aqueous cleaning media. System and Conveyor Technology - Transport system: Integrated, automated carrier circulation system. - Process coupling: Designed for timed linear systems for seamless integration into linked production and robotic cells. - Carriers: Customer-specific carrier design for precise and repeatable component placement during the process. Zone Layout and Process Steps The system goes through a five-stage process chain to meet the highest requirements for particulate and film-like surface cleanliness: - HD cleaning zone (high pressure): Mechanical pre-cleaning using high-pressure nozzles for targeted removal of chips, machining residues, and stubborn contaminants. - Cleaning zone (washing): Aqueous main cleaning (spraying/flooding) for chemical degreasing and removal of dirt from the surface. Fsdpfszzpb Rox Aatopl - Rinsing zone: Downstream rinsing stage for residue-free removal of cleaning agent components from the component surfaces. - Drying zone: Highly efficient blowing and drying unit for complete removal of residual moisture (prevents staining and corrosion). - Cooling zone: Targeted component cooling at the end of the process to thermally stabilize the parts for subsequent processes (e.g., metrology, testing, or packaging). Media preparation, filtration, and peripherals To ensure long bath life and consistent cleaning quality, the system is equipped with extensive peripheral technology: - Filtration: Three separate filtration stages (each designed for up to 10 bar) for the cleaning, rinsing, and high-pressure zones. - Filter monitoring: Dual differential pressure measurement for automatic detection of the filter saturation level. Oil separation: 1x highly efficient oil separator (Type ÖT 60) for continuous removal of foreign oils from the washing bath. - Exhaust air management: 1x air-cooled condenser (Type RL 150) for condensation and extraction of process fumes (reduces humidity at the installation site). - Fluid management: Integrated wastewater piping for cleaning and rinsing tanks, including a robust 1" wastewater pump for emptying. Safety and System Monitoring - Process control: Two integrated viewing windows with splash-proof interior lighting for optical monitoring of the cleaning process during operation. - Environmental protection / emergency protection: Robust drip tray under the entire system, equipped with a leak detection probe for automatic shutdown in the event of media loss. Technical Performance Data - Manufacturer: Semmelroth Anlagentechnik - Model: S 50229/2 - Total connected load: approx. 110 kW - Material: Stainless steel (V2A / V4A)

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, container length: 20 ft, color: blue, machine/vehicle number: 022499722, Equipment: bathroom, hot water, lighting, shower, Equipment: 6 pcs. wall reinforcement 2 pcs. sanitary windows with tilt fittings Parapet height: 1,525 mm above finished floor level (FFL) Frame external dimension: 652 x 714 mm Clear window opening: 590 x 528 mm Insulating glazing with gas fill 1 pc. steel external door Construction dimension (width): 875 mm Clear passage width: 811 mm Clear passage height: 2,065 mm Outward opening 1 pc. door stopper Partitions: 2 m interior partition wall Without insulation Coated steel sheet, 0.5 mm, color: white (approx. RAL 9010) 1 pc. internal door Construction dimension (width): 875 mm Clear passage width: 811 mm Clear passage height: 2,065 mm 5 m WC partition wall 3 pcs. WC partition doors, 625 x 2,000 mm Electrical Equipment: 3 pcs. single socket outlet 1 pc. single socket outlet, 350 mm above finished floor level (FFL) 1 pc. double switch 1 pc. double switch Moisture-proof electrical installation 1,150 mm above finished floor level (FFL) Sanitary Equipment: 2 pcs. ceramic hand basins, 500 x 410 mm Incl. single-lever mixer tap Incl. metal mirror Incl. metal hooks Incl. soap dish 3 pcs. WC cubicles incl. toilet and toilet paper holder 2 pcs. floor drains Fpjdpoyyw R Hofx Aatjl 2 pcs. GRP shower cabins Incl. single-lever mixer tap Incl. shower curtain 1 pc. 300-liter boiler 1 pc. pressure reducing valve 1'' Heating, Ventilation, Cooling Equipment: 3 pcs. exhaust fans, 170 m³ 2 pcs. 2 kW fan heaters

Year of construction: 2018, condition: used, This listing is for the Hamilton Microlab Star M The unit is in full working condition and ready for immediate use This Unit is supplied with: - PC With Software - Thermo Scientific Haake A25 Heating and Cooling Water Bath and SC100 Circulator - ODTC Power and Control Unit - Hamilton Heater and Shaker Box - Spare Parts and Consumables (please see pictures) - Original Manuels and Guides A precision liquid handling system designed for automated pipetting and sample preparation. Known for accuracy and repeatability, it supports efficient lab workflows in research and analytical environments. Compact and user-friendly design. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. Fpjdpfx Aasy Eyqystel • Integrity: 100% Original Parts (Non-Refurbished) Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: excellent (used), Bous 3-Chamber Spray Cleaning System – Cleaning and Degreasing System Bous 3-chamber spray cleaning system for direct degreasing. Fpjdpfxszz H Iuj Aatel System: 3 separate washing chambers, ideal for washing, rinsing and drying in a single process cycle Chamber size (W x H x D): 500 x 300 x 1,000 mm, suitable for long and curved workpieces Equipment: Integrated thermostat for precise control of the bath temperature Control system: Siemens PLC with Siemens SIMATIC operator panel The machine has already been professionally dismantled and is ready for loading on a pallet. Everything from a single source: We will be happy to offer you suitable bank financing for your project. komplett-konzept.leasingo.de

Year of construction: 2021, condition: used, We are selling our chemical nickel work tank. The tank is made of acid-resistant stainless steel and electropolished on the inside. Sager and Mack pump and filter. Munk Protektostat Frequency converter for pump Heater with control and timer. From 10-93°C, approximately 1 hour 30 minutes. The internal dimensions are: L1200 x W600 x H950. The fill height is 880 mm, which corresponds to a volume of approximately 635 liters. Fodpfx Ajqzgb Sjatspl Installation dimensions: L2100 x W900 Total connected load approximately 50A If required, we can also create a customized solution for you.

Condition: used, This listing is for the Clifton NE4-8P Water Bath The unit is in full working condition and is ready for immediate release The Clifton NE4-8P Digital Water Bath With Circulator is an 8-litre laboratory water bath with an integrated pump that recirculates temperature-controlled water for uniform heat distribution. Fpodpfey Iw Aljx Aatol It’s designed for accurate temperature control with a PID digital controller, LED display, and temperature alarm Common lab uses include incubating samples, warming reagents, and stabilising solutions at set temperatures

Year of construction: 2017, condition: used, functionality: limited functionality, machine/vehicle number: 2017038, Technical characteristics: ⚙️ Core Specifications Attribute Value Technology: High-pressure water-jet deburring Max Pressure: Up to 1000 bar Materials Processed: Cast iron, aluminum, steel Machine Type: Rotary table or tunnel with step feed Automation: Robotic arm with programmable sequence: Staubli TX60 newly retrofitted!!! Nozzle Material: Long-life alloy Construction: AISI 304 stainless steel Fodpfxjxx Nq To Aatspl Workpiece Handling: Mechanical clamping on custom pallets Water Treatment: Integrated deoiling and filtration system 🧰 Features & Capabilities Deburring & Flushing: Removes loose burrs and embedded swarf, even in intersecting holes. Flexible Programming: Supports various part geometries and production volumes. Robotic Integration: Nozzles mounted on anthropomorphic robots for precision targeting. Modular Design: Configurable for different layouts and productivity goals. Eco-Friendly Operation: Water-based cleaning with extended bath life via filtration. Loading/unloading manual table: with the option of 2 work stations running in parallel, equipped with Poka Yoke devices. Machine status: WORKING – High pressure pump needs to be retrofitted to achieve 1000 Bar (currently 350 bar).

Condition: excellent (used), Bargain from a small Swiss business: small business, 2500/1300 mm electroplating, safety cable. Fpjdpfjzzcxpjx Aatjl