Used Elumatec As 70 for sale (134)

Year of construction: 1995, condition: used, Max. saw blade diameter: 280 mm Pneumatic material clamps Crjdpfx Aezvd N Eeizei Rotatable table with locking points Minimum quantity spray device Roller tracks and length stops available in different lengths on request

Condition: refurbished (used), Year of construction: 2024, Manufacturer: Elumatec Type SA/ SAS 142 Overhaul year: 2024 Saw blade max. carbide: 500 mm Drive power saw motor: 4 KW Saw motor speed: 2800 min-1 Crodpsuiy Nyofx Aizji Cutting speed saw blade 500 mm: 4400 m/min Saw height control: infinitely variable, fully electronic Working range square 90° max.: 130 x 130 mm Working range flat: 90° max.: 190 x 130 mm Working range round: 90° max.:150 mm Pneumatic feed length: 5-560, 10-1120 mm Compressed air connection, on site 6 bar Weight(saw)approx.: 800 kg Dimensions LxWxH (saw)approx.:2900mm x 1400mm x 1500mm Installation area LxW: 2900mm x 1400mm Additional description Elumatec SA/ SAS 142 4KW Retrofit Elumatec SA 142 4KW Retrofit Fully automatic sawing machine for non-ferrous metal and plastic After completion of the retrofit, the machine is in mint condition, both technically and visually. The machine will be overhauled in our company at the customer's request. Among other things, the following points were renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI control panel - New electrical components - New pneumatic lines - Maintenance or replacement of all pneumatic cylinders and valve terminals - Maintenance of minimum lubrication system - Replacement of general wear parts - Overhaul of the cab Warranty: Unless otherwise agreed, we provide a 6-month warranty on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the warranty. Optional: - Extension of the sawing area to flat 90° max.: 300 x 120 mm - Splitting extension (for a high-quality cut surface without return marks) - Servo-controlled material feed - Saw blade feed Servo-controlled - Mass clamping device Feed vice - Delivery and installation on your premises - Training of your employees

Condition: excellent (used), Year of construction: 2005, Excellent technical condition, recently serviced. Cutting length: 6000 mm Saw blades: 420 mm E550 control system Credpfxezr Icne Aizoi Vertical pneumatic clamping Cutting based on external dimensions, without adjustment Pneumatic angle adjustment from 45 to 90 degrees Cooling system installed Digital angle indicator Saw blade guards that automatically lower and raise.

Year of construction: 2002, condition: excellent (used), functionality: fully functional, ELUMATEC KF 178 – 3-Spindle Copying Router Technical Data Upper Routing Unit Routing area with stops or copying templates: 340 × 100 mm Stroke: 110 mm Lower Routing Unit Routing area with stops or copying templates: 240 × 85 mm Front stroke: 95 mm Rear stroke: 45 mm General Data Continuously adjustable speed from 3,000 to 12,000 rpm. Also suitable for thin-walled steel and stainless steel profiles. Clamping range for profiles: 115 × 100 mm Mains connection: 230/400 V, 3 ~, 50 Hz Cedpfxszcz Dnj Aizjri Motor power per spindle: 0.74 kW Compressed air connection: 7 bar Air consumption per working cycle: 12 l without spray device 24 l with spray device Dimensions (L × W × H): 980 × 1,250 × 1,610 mm Weight: 360 kg Equipment Ideal machine for economical door production. For routing lock cases, profile cylinders and rosettes in aluminum and PVC profiles. Three fully independently operating copying routing units. Separate control of the horizontal and vertical routing spindles. Workpiece clamping upwards against the lock assembly surface, eliminating the need for readjustment with different profile heights. “Spindle Lock” for quick tool changes. Flexible stop system with support rollers and adjustable folding stops. Profile cylinders and rosettes.

Year of construction: 2010, condition: used, 3-axis machining center with automatic tool change for aluminum or PVC profiles Max. Travel distance X-axis: 6,700 mm Max. travel Y-axis: 350 mm Max. travel Z-axis: 280 mm Windows 10 control with new computer in 2023 Speed continuously adjustable up to 24,000 rpm handheld control unit minimum quantity spraying Tool changer with 2 magazines (total 10 places plus angle head) tensioner detection and tensioner displacement 2 pneumatically folding material stops and 2 light curtain areas, enabling pendulum operation A total of 8 material clamps Spindle in very good condition, spindle-in-draw force: 12.5 kN Protective fence removed, a demonstration is still possible by arrangement Weight: approx. 3,500 kg Codpfx Aewwukxsizori

Year of construction: 2007, condition: used, 3-axis machining center with automatic 8-station tool changer for aluminum or PVC profiles Max. Travel distance X-axis: 4200 mm Max. travel Y-axis: 480 mm Max. travel range Z-axis: 325 mm Control E 500 Speed continuously adjustable up to 6,000 rpm handheld control unit minimum quantity spraying Credew Axfqopfx Aizei Bidirectional angle head and a high-speed spindle Wrench measurement 8 pneumatic material clamps Light barrier Very good condition

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 4,200 mm, travel distance Y-axis: 485 mm, travel distance Z-axis: 340 mm, spindle speed (max.): 6,000 rpm, machine/vehicle number: 1300030760, TECHNICAL DETAILS Travel range, X-axis: 4,200 mm Travel range, Y-axis: 485 mm Travel range, Z-axis: 340 mm Max. speed, X-axis: approx. 60 m/min Max. speed, Y-axis: 30–60 m/min Max. speed, Z-axis: 30–60 m/min Max. spindle speed: 6,000 rpm Spindle power: 5.5 kW Crsdpfx Aiszxngmozei Tool changer: 8-position turret MACHINE DETAILS Compressed air supply: 7 bar Air consumption: approx. 100 l/min with spray device Power supply: 400 V, 3~, 50 Hz

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 4,200 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, overall weight: 9,000 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 5,500 W, number of axes: 3, This 3-axis Elumatec SBZ 130 was manufactured in 2007. It features a maximum machining length of approximately 4200 mm and a robust Y-axis travel of 400 mm. The high-speed milling spindle operates at a maximum speed of 6000 rpm, supported by an 8-position turret head tool changer. If you are looking to get high-quality profile machining capabilities, consider the Elumatec SBZ 130 CNC profile machining centre we have for sale. Contact us for further details. Cedpfx Asyt Hg Neizjri • Control system: Ferrocontrol CNC • Max. machining length: approx. 4200 mm • Machining length with end machining: approx. 4080 mm • Spindle: • Type: High-speed milling spindle • Tool system: • Tool changer: Turret head • Tool positions: 8

Year of construction: 1996, condition: excellent (used), functionality: fully functional, ELUMATEC MGS 72/30 – Miter saw Technical data: Saw blade diameter: 380 mm Motor power: 3.0 kW Speed: 2,800 rpm Power supply: 230/400 V, 3 ~, 50 Hz Swivel range: 0–45° to the left and right Angle adjustment: stepless Codpfx Aez Dpv Deizjri Locking positions at 15°, 30° and 45° Saw blade feed: manual Dimensions (L × W × H): approx. 780 × 900 × 815 mm Weight: approx. 120 kg Robust and precise miter saw for cutting aluminum and plastic profiles. Stable machine table with a precisely mounted rotating table. Ideal for use in window, door, and aluminum profile construction.

Year of construction: 2002, condition: used, 3-axis machining center with automatic 8-station tool changer for aluminum or PVC profiles Max. travel stroke X-axis: 6400 mm Max. Travel of Y-axis: 400 mm Max. travel range Z-axis: 380 mm Control E 500 Crjdpozf I Ttofx Aizoi Speed continuously adjustable up to 6,000 rpm handheld control unit minimum quantity spraying 2 angle heads and a high-speed spindle 8 pneumatic material clamps Oscillating operation possible Photoelectric sensors

Year of construction: 2005, condition: used, Max. saw blade diameter: 550 mm Swivel inside and outside 22.5° - 90° - 140° Cjdozf Agzepfx Aizori Pneumatic tilting of the angles between 45 and 90 degrees Digital Angle Indicators Feed with 2-hand operation Roller beds and length stops on request Weight: approx. 1,000 kg

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, saw blade diameter: 380 mm, Feature | Value Machine type | Double miter saw Saw blade diameter | 380 mm Crjdpfx Ajzdvnisizei Saw blade speed | 2,800 rpm Motor power | 2 × 0.74 kW (per sawing unit) Operating voltage | 400 V / 3~ / 50 Hz Operating pressure | 7 bar Swivel range | 0° to 45° to the left and right Detent positions | 15°, 30°, 45° Max. cutting length | approx. 7,000 mm (model-dependent) Material | Aluminum and plastic profiles

Year of construction: 1995, condition: excellent (used), Manual length adjustment via handwheel with digital display. Maximum feed length: 3,000 mm. Csdpsy Tyzzofx Aizori Pneumatic parking brake.

Year of construction: 1998, condition: used, 3-sided machining in one setting Speed: 12,000 revolutions per minute 2 pneumatic tracers at the bottom, 1 tracer at the top Crsdpfx Aszwl R Toizsi Pneumatic material clamping Minimum quantity spray device Milling area vertical (top): 330 x 130 mm Milling area horizontally (from the front or rear): 220 x 95 mm Stroke: 110mm With side stops Weight: about 350 kg

Year of construction: 2007, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1340020469, Mitre Saw Machine AKS 134/00 1 x Saw Blade Ø550mm Crjdpox A D Ihjfx Aizji 1 x Saw Blade Ø500mm Equipped with digital angle setting readout

Condition: used, These are three machines: 1. Aluminum saw machine TS161 – in very good condition. Max. saw blade diameter 280 mm Angle adjustment: manual Pneumatic material clamps Codpez Hn Anefx Aizeri 2. Aluminum saw machine TS161, requires repair; pneumatic cylinders are missing (motor runs) 3. Copy milling machine Elumatec AS 70AS70/44, requires repair (motor runs) Price for 3 machines: €2,500.00

Year of construction: 2006, condition: used, 3-axis machining center with automatic tool change for aluminum or PVC profiles Max. travel X-axis: 3,850 mm Cedpfx Aisx Ecfkjzori Max. travel Y-axis: 350 mm Max. travel Z-axis: 280 mm Control E 550 Stepless speed control up to 21,000 rpm Manual control device Minimal quantity spray Automatic tool changer with magazine (4 slots plus angle head) Spanner measurement and clamp displacement 4 pneumatic material clamps Light barrier Weight: approx. 2,000 kg

Condition: good (used), Precise work is achieved through sawing from below. A large swivel range of up to 45° to the left and up to 0° to the right is provided. The special swivel mechanism with an integrated rotary table allows work to be performed from the front at all angle settings. A workpiece stop that can be shifted towards the rear enables optimal use of the saw blade capacity when processing wide and flat profiles. Manual saw feed. Comes standard with a saw blade and base frame. Pneumatic material clamping device (vertical). Metering spray device. Maintenance unit. Credjzdi Nmjpfx Aizei

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 280 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 21,000 rpm, working length: 3,750 mm, TECHNICAL DETAILS Machining length with bar support: 3,750 mm Machining length without bar support: 3,500 mm Travel range X-axis: 3,500 mm Travel range Y-axis: 280 mm Travel range Z-axis: 300 mm Positioning speed: 30 m/min Positioning accuracy: ±0.1 mm Spindle power: 6 kW Spindle speed: 21,000 rpm Spindle interface: HSK F63 Tool positions: 5 Max. tool diameter (manual): 200 mm Max. tool diameter (automatic): 92 mm Max. saw blade diameter: 500 mm MACHINE DETAILS Crsdoznczkepfx Aizei Air consumption: approx. 50 l/cycle Compressed air requirement: > 7 bar Power supply: 400 V, 3-phase Note: The machine's operating hour counter is defective and cannot be read. The machine was only used in a single-shift operation.

Condition: excellent (used), functionality: fully functional, ELUMATEC SBZ150 5-axis CNC profile machining center, manufactured in 2004. Credpfx Aieylbviszei 5-axis CNC machining center for aluminum and thin-walled steel profiles.

Year of construction: 2007, condition: used, 5-axis machining center with tool changer for aluminum or PVC profiles Max. machining length: 9,000 mm Travel Y-axis: 1150 mm Crjdpfx Aisxwydbjzoi Travel Z-axis: 715 mm A-axis swivel angle: 0° - 180° Angle C-axis: 0° - 180° Max. speed 24,000 rpm. Spindle power: 21 kW Tool changer with 13 standard and 7 special tools minimum quantity spraying Clamp detection and automatic shifting 12 pneumatic material clamps Pendulum operation through two light barrier areas Manual control console Loading is included in the price Weight: approx. 8,500 kg

Year of construction: 2005, condition: excellent (used), functionality: fully functional, -Maximum milling cutter diameter: 280 mm -Milling cutter arbor bore: 40 mm Cjdpfx Ajyyma Reizjri -Feed: manual -Power: 2.5 kW at 400 V/50 Hz -Milling spindle speed: 2,800 rpm -Compressed air connection: 7 bar -Air consumption: 10 liters per working cycle, with minimum quantity lubrication: 20 liters -Length: 1,540 mm, depth: 905 mm, height: 1,200 mm, weight: 248 kg

Year of construction: 2006, condition: used, Saw blade diameter (vertical): 550 mm Cedpfeyybr Ujx Aizori Saw blade diameter (horizontal): 500 mm Max. profile height: 250 mm Max. feed rate: 830 mm Digital angle displays for material stop and tilting of both saw units Pneumatic material clamps Minimum quantity spray device Hydropneumatic saw blade feed via 2-hand operation Weight: 1,000 kg

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 850 mm, travel distance Z-axis: 650 mm, spindle speed (max.): 24,000 rpm, spindle motor power: 11,000 W, number of axes: 4, This 4-axis Elumatec SBZ-140 was manufactured in 2010. It features a maximum profile length of 7600 mm and a Y-axis travel of 850 mm, making it suitable for machining aluminum and thin-walled steel profiles. The machine includes an air-cooled spindle with a maximum speed of 24,000 rpm and a tool magazine capacity of 8 positions for efficient operation. If you are looking to get high-quality machining capabilities, consider the Elumatec SBZ-140 vertical machining centre we have for sale. Contact us for further details. • Application: Machining of aluminum and thin-walled steel profiles • Operating system: Windows • Machining capabilities: Milling, drilling, tapping, end machining • Continuous machining range: 0°–180° • Working area: • Max. profile length with end machining: 7480 mm • Max. profile length without end machining: 7600 mm • Axis travels: Crjdpfxszaq Eie Aizji • A-axis rotation: 0°–180° • A-axis programming increment: 0.1° • Axis speeds: • Y-axis: up to 60 m/min • Z-axis: up to 60 m/min • Spindle: Air-cooled • Tool magazine: 8 positions, co-moving for fast tool changes, expandable system • Machine features: Stationary profile machining, fast automatic tool changes, suitable for aluminum and thin-walled steel profiles, two machining zones (optional) • Pneumatic system: 7 bar required, approx. 180 l/min air consumption (with spray system) • Electrical data: 400 V / 3-phase / 50 Hz, main connection 63 A • Control panel: 15” color display, USB interface, LAN connection Additional equipment • Angle head set (0°, 90°, 180°, 270°) for end machining and double profiles • Pendulum mode / 2 working zones (optional configuration)

Condition: used, Year of construction: 1991, cutting width 280 mm Cutting height 150 mm Motor output 2 x 4,0 kW saw blade 420 x 30 mm Credpfx Aiszughbjzoi Cutting length 6000 mm speeds 2800 U/min air pressure 7 bar weight of the machine ca. 1750 kg dimensions of the machine ca. 7550 x 1600 x 1450 mm Furnishing: - Control E 255 - Extraction ESTA DUSTOMAT-22 Bj. 1998 - roller conveyor - 2x saw blade 120 x 4.0 x 30 Z96