Used Emag for sale (140)

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 101458, Machine Data Sheet General Information Manufacturer: EMAG Machine Type: CNC Vertical Lathe Model: VL5 S Serial No.: 101458 Year of Manufacture: 2008 Technical Data Max. Chuck Diameter: 260 mm Max. Swing Diameter: 260 mm X-Axis Travel: 570 mm X-Axis Working Stroke: 250 mm Z-Axis Travel: 200 mm Hnjdpfx Asxtpi Ssdwjg Conveyor Maximum Permissible Total Weight: 120 kg Conveyor Maximum Diameter: 220 mm Front Spindle Bearing Diameter: 110 mm Main Drive AC Asynchronous Motor Max. Speed: 4,500 (5,000) rpm Drive Power at 100/40% Duty Cycle: 18/27 kW Torque at 100/40% Duty Cycle: 202/303 Nm Number of Tools: 12 pcs. Tool Holder DIN: 69880, Diameter 40 mm, Max. Tool Length 190 mm Chip Conveyor (Hinged Belt Conveyor): Discharge Height 1,250 mm Coolant Tank: 315 liters, 8 bar Control: Siemens 840 D Connected Load: 42 kW Voltage: 400V 50Hz Weight: approx. 6,500 kg Required Floor Space: 10 m²

Condition: used, Year of construction: 2012, turning diameter 140 mm turning length 630 mm control Siemens 840 SL max. swing diameter over bed 250 mm turning speed range - main spindle 0 - 5000 min/-1 max. torque 256 Nm spindle bearing diameter 110 mm spindle bore 52 mm spindle head Gr. 6 DIN 55026 chucking diameter max. 250 mm number of tool places 3 x 12 Pos. tool taper VDI 40 max. tool weight 20 kg max. tool diameter 40 mm max. tool length 95 mm max. workpiece weight 20 kg max. workpiece diameter 140 mm x-travel 300 mm z-travel 740 mm rapid traverse x 45 / z 30 m/min total power requirement 70 kW weight of the machine ca. 25,0 t dimensions of the machine ca. 6,5 x 3,5 x 4,4 m In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical features: - Siemens S120 drive systems - 3x turret, all places AGW, 2x of them with y - axis - 2x main spindle, 1x with tailstock - Spindles total 5 pcs. - Tool monitoring, Artis - Total electronic axes: 21 pcs. Accesories: - chip conveyor - Radio probe, Renishaw - Cooling unit - Infeed and outfeed conveyor - suction There are 2 identical machines available. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Hsdpfexqrgzox Adwjng Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: good (used), Year of construction: 2016, Offered is a vertical CNC-turning machine VLC 100 with the year of manufacture 2016. The machine is ideal for the production of chuck parts with a diameter of max. 100 mm. With its integrated automation and the pick-up spindle, the machine is characterized by short distances and ensures short chip-to-chip times. Hedpfx Asnmywksdwong CONTROL Siemens 840 DSL TECHNICAL DATA Workpiece diameter: max. 100 mm Workpiece height: max. 150 mm Chuck diameter: 160 mm Swing diameter: 210 mm Strokes X / Z: 650 / 375 mm MAIN SPINDLE power (40% / 100% ED): 16.7 / 14.5 kW torque (40% / 100% ED): 74 / 55 Nm speed: max. 6,000 rpm Rapid-traverse rate X / Z: 60 / 30 m/min TOOL CARRIER EMAG wheel turret, 12x BMT55 for driven tools We sell the machine "bought as seen" without warranty.

Condition: like new (used), Year of construction: 2015, Workpiece Ø max. 400 mm Workpiece length max. 300 mm Chuck Ø max. 500 mm Swing Ø 520 mm Travel X-axis: 1,110 mm Hnodpjxy Ac Sjfx Adwsg Travel Z-axis: 595 mm Main spindle: Power 40 / 100 % duty cycle: 47/34 kW Main spindle: Torque 40 / 100 % duty cycle: 600 Nm Main spindle: Max. speed: 2,850 rpm Control: Fanuc 31i No Y-axis

Condition: good (used), Year of construction: 2013, operating hours: 44,500 h, EMAG VL5i vertical turning machine (2013) Hsdpfxjxnnige Adweng Manufacturer: EMAG Type: VL5i Year of manufacture: 2013 Operating hours: 44.500 Condition: good, used, in production Control SIEMENS 840 D SL Emulsion mist extraction chip conveyor Further information will follow

Condition: excellent (used), Year of construction: 2009, operating hours: 67,343 h, functionality: fully functional, All data will be provided upon request regarding this listing. The machine is dirty. Up until July, the machine delivered top tolerances at MAGNA POWERTRAIN and is otherwise in fully functional condition. Hnedpfx Adsxl Ah Sjwjg

Condition: used, Year of construction: 2014, max. turning diameter 160 mm max. turning height 150 mm max. workpiece diameter 100 mm max. workpiece height 150 mm max. turning speeds 6.000 U/min travel -x axis 700 mm travel -z axis 375 mm c-axis 360 ° control FANUC Vertical Turning Machine | EMAG - VL2 equipped with a workpiece conveyor belt. The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Hnodpfoqvd Iusx Adwog #Tags: VL-2 | VL 2

Condition: ready for operation (used), Year of construction: 2010, operating hours: 49,479 h, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Z-axis: 200 mm, spindle speed (max.): 7,500 rpm, turning diameter: 210 mm, turning length: 100 mm, TECHNICAL DETAILS Max. turning diameter: 210 mm Max. turning length: 100 mm Max. swing diameter over bed cover: 210 mm Travel X-axis: 400 mm Travel Z-axis: 200 mm Max. workpiece length: 100 mm Max. workpiece diameter: 27 workpieces with 30–85 mm or 18 workpieces with 30–130 mm Max. main spindle speed: 7,500 rpm Main spindle power at duty cycle 10–40/100% max.: 25/16 kW Main spindle torque at duty cycle 10–40/100% max.: 200 Nm Main spindle front bearing diameter: 80 mm Main spindle flange size: Size 5 (DIN 55026) Axes at main spindle unit: X/Z Turret: bottom Number of stations/driven stations: 12/12 Tool mounting in turret: VDI 40 Rapid traverse speed X-axis: 60 m/min Rapid traverse speed Y-axis: 30 m/min Feed force in X/Z main spindle unit: 5,000 N Direct linear measuring system main spindle unit: X/Z MACHINE DETAILS Control: Fanuc 18i TB Electrical Data Operating voltage: 400/50 V/Hz Main fuse: 80 A Total connected load: 36 kVA Hjdpfx Adexu Ekbewong Dimensions & Weight Machine dimensions (LxWxH): approx. 2,500 x 1,900 x 2,300 mm Overall system footprint (LxWxH): approx. 3,600 x 1,900 x 2,300 mm Machine weight: approx. 6,000 kg Operating hours: approx. 49,479 h EQUIPMENT Full-stroke cylinder on main spindle Splash guard enclosure with fully encapsulated working area Work area lighting Oil/emulsion mist extraction system Hinged belt chip conveyor (discharge height: 1250 mm) Coolant system Circulating parts storage conveyor Automatic central lubrication

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 00404, turning diameter: 250 mm, Available from: 10.10.2025 – The system consists of two individual units that are linked together. TECHNICAL DETAILS Turning diameter: 250 mm Swing diameter: 260 mm MACHINE DETAILS Power supply: 3-phase AC Frequency: 50/60 Hz Operating voltage: 400 V AC Control voltage: 24 V DC Connected load: 36 kW Rated current: 58 A Hsdpfew T Rx Njx Adwsng Main fuse: 80 A NH Total weight: 6,500 kg EQUIPMENT - No driven tools

Year of construction: 2018, condition: ready for operation (used), A CNC vertical turning machine EMAG is available. Workpiece diameter: 100mm, max. workpiece length: 150mm, max. chuck diameter: 160mm, travel X/Z: 650mm/375mm, travel Y: +/-50mm, spindle power: 15.7kW, torque: 77Nm, speed: 6000rpm, tool stations: 12, rapid traverse X/Z: 60m/30m/min. Machine dimensions X/Y/Z: approx. 2500mm/1800mm/2800mm, weight: approx. 4500kg, control: Fanuc 32-iB, operating hours: approx. 28487h, spindle hours: approx. 18640h. Including extraction system, 2 axial and 2 radial driven tools, 20x fixed tool holders, 3-jaw chuck and probe. Documentation available. An on-site inspection is possible. Hedpfxexq Exke Adwsng

Condition: good (used), Year of construction: 2013, grinding diameter 390 mm grinding length 650 mm centre height 200 mm total power requirement 46 kW weight of the machine ca. 6 t dimensions of the machine ca. 3x3x2,4 m Universal cylindrical grinding – Type WUG21 (W27) Grinding length 650 mm EMAG Weiss stands for high-end technology in universal cylindrical grinding Hjdpfsw Inr Njx Adweng between centres. With its CNC-controlled WUG 21 machines, EMAG Weiss offers the right solution for virtually every user. --> Technical data Max. grinding length: 650 mm --> Centre height: 200 mm --> External grinding diameter: 1 – 390 mm --> Max. weight flying MK4: 100 kg --> Max. workpiece weight between centres: 250 kg --> Feed: --> X-axis travel: 480 mm --> Z-axis travel: 1.150 mm --> Workpiece headstock --> Tailstock --> Grinding spindle headstock --> Coolant device, manufacturer HYFRA, --> Belt filter, manufacturer Knoll, type KF 200 - year of manufacture 2012, --> Oil mist filter, manufacturer Cobaron

Condition: excellent (used), Year of construction: 2018, EMAG VL 3 DUO CNC Twin Spindle, Vertical Turret Lathe Mfd. 2018 S/N 1100619, EMAG CNC control, (2) 12-station turrets, Chip conveyor, Full automation system Hennig system Hours: 4,684 2 Machines Available Hedpfsu T Shvjx Adwong 110612, (2) w/Hennig Mdl. 102783 chip conveyor, full automation system, 4,684 and 7,401 hours.

Condition: used, Year of construction: 2014, max. turning diameter 160 mm max. turning height 150 mm max. workpiece diameter 100 mm max. workpiece height 150 mm max. turning speeds 6.000 U/min travel -x axis 700 mm travel -z axis 375 mm c-axis 360 ° control FANUC Vertical Turning Machine | EMAG - VL2 equipped with a workpiece conveyor belt. The machine is in very good condition. Please note that the technical details were added from comparable machines. Hodpfxoqvd Iqo Adwsng - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL-2 | VL 2

Condition: ready for operation (used), Year of construction: 2008, operating hours: 72,284 h, functionality: fully functional, feed length X-axis: 685 mm, feed length Z-axis: 200 mm, travel distance X-axis: 685 mm, travel distance Z-axis: 200 mm, chuck outer diameter: 250 mm, rapid traverse X-axis: 45 m/min, rapid traverse Z-axis: 30 m/min, total length: 3,100 mm, total height: 2,650 mm, total width: 4,000 mm, rotational speed (max.): 6,000 rpm, torque: 460 Nm, overall weight: 7,800 kg, controller model: Siemens 840D, control type: CNC control, Equipment: cooling unit, For sale is an EMAG VSC250, year of manufacture 2008. Hsdpfx Adow Dyqdewong Equipped with a Siemens 840 D control system. Features: - Infeed and outfeed conveyor (O-belt) - Pneumatically operated transfer unit - Stamping unit - Chip conveyor (ejection left) - Coolant system - Tool turret 12x VDI40 The machine is powered and available for inspection.

Condition: used, Year of construction: 2003, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Z-axis: 200 mm, chuck outer diameter: 200 mm, spindle speed (min.): 6,000 rpm, overall weight: 6,500 kg, power: 40 kW (54.38 HP), year of last overhaul: 2023, Equipment: documentation/manual, Both machines form a single unit. Year of manufacture: 2003, fully functional and still in operation. See photos. The machines are equipped with a chip conveyor serving both machines. A coolant tank was subsequently installed. Accessories include various holders, jaws, and one new AGW. The machine can still be inspected under power and in operation. Hnedpfjxq Aruex Adwjg

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 105958, travel distance X-axis: 700 mm, travel distance Y-axis: 375 mm, spindle speed (max.): 6,000 rpm, workpiece diameter (max.): 100 mm, workpiece length (max.): 150 mm, The automation is included in the scope of delivery! TECHNICAL DETAILS Hjdpfxsxb Tu Io Adwjng Travels X-axis: 700 mm Z-axis: 375 mm Workpiece Chuck diameter: 160 mm Max. workpiece diameter: 100 mm Max. workpiece length: 150 mm Main spindle Power 40% / 100%: 19.5 / 12.5 kW Torque 40% / 100%: 75 / 48 Nm Max. speed: 6,000 rpm Turret Tool stations: 12 Rapid traverse speed X / Y / Z: 60 / 30 / 30 m/min Driven tools Speed: 6,000 rpm Torque 30% / 100%: 27 / 15 Nm MACHINE DETAILS Frequency: 50 Hz Operating voltage: 400 V Connected load: 30 kW Total weight: 6,000 kg

Condition: used, Year of construction: 2008, Article: Vertical turning and grinding centre Manufacturer: EMAG Type: VSC 250 DS Yob: 2008 Control: SIEMENS 840D Grinding spindle speed: 30,000 rpm Rotation spindle speed: 3,000 rpm Tool places turret: 12 Hnedpeia Rtdefx Adweg Cooler for spindle and machine bed cooling Cooling lubricant - lifting station (no independent cooling lubricant supply) Chip conveyor Parts handling Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, this can be overhauled in a spindle factory. Otherwise the machine is in a very good condition and fully functional. Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Year of construction: 2001, turning diameter 220 mm Control Fanuc 18i x-travel 390 mm z-travel 435 mm Hnsdpfx Adswth Szswog tool taper VDI 40 number of tool places 12 Pos. spindle tunring speed 4.500 U/min In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 2841823, Maximum workpiece diameter: 250 mm Maximum workpiece length: 175 mm Maximum chuck diameter: 315 mm Axis travel: X-axis: 860 mm Z-axis: 200 mm Rapid traverse: X-axis: 45 m/min Z-axis: 30 m/min Main spindle speed: up to 4500 rpm Main spindle power: 28 kW Control system: SIEMENS SINUMERIK 840Dsl Hnedpfx Aov U Emtedweg Tool turret: 12 positions Maximum workpiece weight: 6 kg

Condition: used, Year of construction: 2004, turning diameter 250 mm turning length 100 mm control SIEMENS 840 D total power requirement 35 kW weight of the machine ca. 7500 kg dimensions of the machine ca. m E M A G (Germany) Vertical CNC Controlled Hard Turning and Grinding machine with tool turret and workpiece handling System Model VSC 250 DS Year 2004 # M7 28.69324 _____ Turning Ø, max. 250 mm Turning length internal / external 100 mm Workpiece length min./max. 29 – 100 mm 6-positon tool turret Ø / swing-Ø 480/790 mm Workpiece spindle Slide travel, X / Z / stroke 680 / 400 / 200 mm Feed rate / Quick feed X/Z 45/30 m/min. Feed force X/Z 5,5/11 kN Spindle speed 4.300 / 6.000 rpm Spindle drive 28 kW Total electrical load, approx. 35 kW - 400 V - 50 Hz Weight, approx. 7,500 kg Accessories / Special Features: * CNC – Continuous Path Control SIEMENS Model 840 D, with colour monitor, graphics, menu-supervised dialogue programming, and all the usual options, cycles and subprograms, etc. * Hexagon Tool turret head with 6 tool positions (Ø 40 mm) without motorized tools posts, two positions T 3 u. T 6 equipped with grinding spindles with 42.000 rpm and with 18.000 rpm, using CBN discs resp. Hodst Hxa Tspfx Adwjng regular grinding tools * Workpiece handling device with WP transportation frames and circulation system and pick-up and unloading of finished parts directly through the motor spindle which is equipped with a hydraulic 3 jaws chuck make SMW Autobloc with membrane clamping and clamping control system. * MARPOSS MIDA Measuring Probe for measuring blank parts a. the finished parts * NORGREN air measuring system, hydraulic weight compensation of spindle, * Main elements of machine are temperature stabilized by a coolant system made by HYFRA * Recooler for the grinding coolant sitting on a large Coolant device consisting of SEITZ Paper Band filter and a mobile Chipconveyor, Magnetic separator, Centrallubrication, etc. Vertical CNC lathes offer a thermo-resistant construction (chips do not fall onto the machine bed),fast workpiece change times (pick-up system through the main spindle) and a ridged tool arrangement,which also allows unrelated machining work, like hard turning or grinding process on the same machine. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, functionality: fully functional, We are offering a complete EMAG line consisting of 6 machines (VL3, VL5, and VL5i – see nameplates) including central chip conveyor and coolant supply. The machines are in operational condition and can be inspected under power at our facility in 47225 Kedzierzyn-Kozle, Poland. We are happy to sell internationally, but please note that special packaging will be required for overseas shipment. Disassembly and export packaging suitable for shipping overseas are the buyer’s responsibility. The listed price is for a single machine without chip conveyor and coolant supply. If you purchase the entire line, the price is EUR 120,000, including chip conveyor and coolant supply. Hedpfju U D E Njx Adwsng

Condition: excellent (used), Year of construction: 2005, turning diameter 140 mm swing diameter 200 mm turning height 630 mm Control Siemens 840 S centre distance 832,5 mm turning length 380 mm spindle head Grösse 6 spindle diameter in front bearing 110 mm Hjdpfevvcibjx Adwsng bed slide 2 number of cross-slides 2 turret head VDI 40 number of tools 11 total power requirement 70 kW weight of the machine ca. 22 t dimensions of the machine ca. 5,8 x 8,6 x 3,8 m

Condition: excellent (used), Year of construction: 2013, Working area Chuck diameter 160 mm Weight max. 86* kg Swing diameter 200 mm X-travel (working stroke) 380 mm Z-travel 660 mm Hnedpfx Ajvz S Sisdwjg Loading time (depending on clamping device) 1 – 2 sec. Main spindle 2 number Spindle flange according to DIN 55026 5 size Spindle bearing – Ø front 80 mm Maximum speed 6000 rpm. Main drive, see description 2 number Feed drive Rapid traverse speed, X 60 m/min. Rapid traverse speed, Z 60 m/min. Feed force in X/Z 3.75 / 7.5 kN Ball screw diameter in X / Z 32 / 40 mm Disc turret, see description Electronic equipment in accordance with VDE 0113 Operating voltage 400 V Control voltage direct current 24 V -alternating current 230 V Frequency 50 Hz Connection value Connection power without Lt 36 kW Connection power with Lt 39 kW Rated current 64 A Supply line fuse 80 A Dimensions and weight Depth 2800 mm Depth including chip conveyor 4350 mm Width 1200 mm Width with automation 1600 mm Height 2500 (2800) mm Weight approx. 7000 kg

Year of construction: 1961, condition: used, centre height 235 mm turning diameter 470 mm turning speeds 2700 U/min turning length 1500 mm Hnjdpel Ab Htefx Adweg inkl. Zubehör (siehe Bilder)

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 103342, travel distance X-axis: 850 mm, travel distance Z-axis: 315 mm, spindle speed (max.): 3,400 rpm, turning diameter: 340 mm, TECHNICAL DETAILS Turning diameter: 340 mm Swing diameter: 420 mm Turning height: 315 mm X-travel: 850 mm Z-travel: 315 mm Control: Siemens 840 DSL Spindle Spindle speeds (infinitely variable): 0 - 3,400 rpm Main motor power: 37 (48) kW Feed Hsdpfov T U T Hjx Adwong Feed range in X-direction: 0 - 45 m/min Feed range in Z-direction: 0 - 30 m/min Tool Tool system: 12-station turret head Tool drive power: 19 kW Tool speeds: 0 - 6,000 rpm MACHINE DETAILS Total power requirement: 60 kW Machine weight: approx. 12 t Space requirement: approx. 3.7 x 3.1 x 3.3 m EQUIPMENT - CNC vertical lathe - Automatic workpiece feed