Used Emb Wittlich for sale (5,709)

Condition: like new (used), Year of construction: 2015, Specifications: • Number of flat heads: 6 • Number of needles/ colors: 15 • EMB area: 450x380/380 • Maximum speed: 1000 rpm, max on the caps: 800 rpm Frames included: • Blue frame round 12 cm, 12 units • Blue frame round, 15cm, 12units • Blue frame round, 18cm, 12units • Round frames ASSY, 300x290 mm, 12units • Round frams ASSY, 460x304 mm, 12units • Portal Frame Set C06, 450x380 mm. , 1units • Caps frames (set of 6 units) • Automatic thread trimmer. • Table height adjustment. • Bobin winder. • Dimensions: L3145; W1245; H1690 Hsdpem Tv A Eefx Adweng • Weight: 1310 kg

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Vacuum membrane press ARTEX VPS - 300 350x150 TECHNICAL DATA - dimensions of working table length/width 3500x1500mm - working temperature ±40-60°C - maximum temperature ±80°C - additional heating with air - power of heaters - 3×1,5kW 4,5kW Hodpjtp Td Tefx Adwjng - power of vacuum pump 0,75kW - capacity of vacuum pump 25m3/h - noise level 67dB - dimensions L/W/H 3900x1800x1400mm - weight about 550kg

Condition: like new (used), Year of construction: 2025, functionality: fully functional, type of input current: three-phase, warranty duration: 12 months, input voltage: 220 V, control voltage: 220 V, Equipment: CE marking, High precision, adjustable full automatic oral bottle filling sealing machine . Hnjdpexl Edcefx Adwjg

Condition: new, Dimensions (L,W) 1400 x 1750 mm Weight , kg tiltable yes/no ja RUCHSER assembly tilting table RU-MKS 1,4 ----- Universally applicable work table e.g. for frame assembly, roller shutter box assembly, bars, sash fittings, glazing Equipment of machine, alternative / optional equipment on request! Pos. 1.0: Article no .: 8820000 RU-MKS-1,4 assembly tilting table Basic dimensions 1400 x 1750 mm, extended 3400 x 2500 mm Support surface with 3 support bars, 2 of which are adjustable, one permanently mounted on the upper extension, covered with felt. Support surface with width and Height / depth pull-out. Pneumatic tilting device, Payload 130 kg. Actuation via foot valve. Roller conveyor can be folded down manually and pulled out to the side from 1400-2500 mm, roll length 140 mm closed. Roller conveyor height in vertical Table position adjustable from 300-380 mm, Horizontal working height adjustable from 920-970 mm. ! For security reasons, at least one Flat clamping cylinders can also be ordered! Pos. 1.1: Article no .: 5582 Pneumatic swivel device of the roller conveyor for MKS Pos. 1.2: Article no .: 21127 Support beam 1400mm not extendable for RU-MKS Pos. 1.3: Article no .: 5585 360 ° rotating device with pneumatic locking in 180 ° steps Rotary brake with double-sided actuation When using the rotating device, the minimum roller conveyor height of the increases MKS tables on 330mm Pos. 1.4: Article no .: 6455-01 6 pieces of storage boxes with 2 compartments each, swivel mounted; for RU-MKS Pos. 1.5: Article no .: 5597-10 Driving device for semicircular rails for RU-MKS-P4 Actuation via foot valve, mounted on the roller conveyor side. Pos. 1.6: Article no .: 6354-6 3 double meter semicircular runways 30 x 10 mm. Pos. 1.7: Article no .: 5193-1 Flat clamping cylinder with manual valve, clamping range 130 mm, can be hidden attached to the support beam, with felt on the system part, Attachment left or right Please specify. Item 1.8: Article no .: 5584 Lifting device 450 mm for working on the vertical element. Actuation via foot valve. Maximum payload 200 kg for RU-MKS ...- 1.4 and 140 kg for RU-MKS ...- 2. Hodpfx Aox H Al Aedwjng Item 99.1 Packaging on a pallet ----- Total price in this version: on request! See attached video and PDF brochure. (Technical information according to the manufacturer - without guarantee!)

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Line was implemented & wasnt used for serial production yet except FOT production. Quite new. It contains below processes : Robotics ArcWelding Cell With 3 Axis Turn Table x 2 Qty Hjdpfx Adew Upppoweng 2S-1100 Robotics ArcWelding Cell X 1 Qty Knuckle Bracket and Spring Seat Fixture x 4 Qty Stab Bracket Fixture X 2 Qty Knuckle Bracket Projection Welding System X 1 Qty Automatic Base Cap and Knuckle Bracket Assembly System X 1 Qty Drilling And Press Machine with Industrial Robot X 1 Qty Leakage Test System X 1 Qty Marking System X 1 Qty

Condition: good (used), PLC control, central module, RAM, CPU, central device Hnedpfswpgv Dsx Adwsg -Manufacturer: Siemens, Central Controller Simatic S5-100U CPU 102 -Type: 6ES5 102-8MA02 -Memory module: 1x 6ES5 275-OLA15 / 1x without photo type designation -Quantity: 1x assembly available -Price: per piece -Dimensions: 130/90/H135 mm -Weight: 0.7 kg/piece

Condition: used, Year of construction: 2015, operating hours: 35,052 h, Operational machine! Modular Type Multi - Purpose Automated Fabrication Machine sFAB50. Hours worked: 35052 Hodpfex Nh Rpex Adwjng The component feeders: Radial tape feeder pitch 12,7 mm - 3 pcs. Horizontal stacked stick feeder - 1 pc. The ball screw of X-axis may need to be replaced in the near future. Ask for specifications!

Year of construction: 2025, condition: new, Dimensions (L/W/H) 3500x1600x2000 mm Weight 1720 kg Hsdpfx Aov A E N Dsdwjng Total power requirement 26,5 kw

Condition: excellent (used), Year of construction: 2017, Rotox sash assembly table, year of manufacture 2017; automatic screw feeding, adjustable screwdriver height, fitting punch (Maco), corner bearing drilling unit, fitting rack. Hjdpfx Adsx Rtpajweng

Condition: used, consisting of: Decorative film + aluminum backing plate + circuit board. new decorative film (manufactured in 2019), Control panel 23 001 0078, ID no. 10017781 / 912053002, br. original circuit board cleaned and checked, br. original aluminum support plate, cable on request. Hnsdpelkch Sjfx Adweg

Condition: good (used), Year of construction: 2005, functionality: fully functional, Multi-Head Embroidery Machine – Machine No.: 46394 Hnedex Sw Uiepfx Adweg Control cabinet No.: 05067 Diagram No.: MSCF Speed: 900 rpm Maximum speed: 900 stitches per minute Weight: 3,500 kg Number of heads: 15 Number of colors: 11 Embroidery width: 1000 mm Thread trimmer Reader

Condition: used, for milling chucks, spindle head Hodpfxeb A Rl Se Adweng -for: Assembling and disassembling tool combinations -in: vertical and horizontal arrangement -Recording: SK45 -Weight: 8 kg

Condition: excellent (used), LINE (year 2024) for transporting, assembling and pressing furniture carcasses. Composed by: A) Motorised belt for transporting and assembling furniture (length mm 2500) Hnsdpjwcn Hdsfx Adwsg B) Clamping Pressing machine Mod. WEPRESS TWIN EP 8. 2, with motorised belt conveyor, furniture diemensions - Min/Max length: mm 250 /2500 - Min/Max depth: mm 300 /820 - Min/Max height: mm 250 / 1200 C) Turning device (0°-180°) Automatic (motorised belt) length mm 1800 + flaps D) Motorised conveyor belt (length mm 2500) E) Motorised conveyor belt (slow speed) length mm 7000, for insertion of drawers, corners (protections), cartons (packaging) F) Motorised conveyor belt (length mm 5000) G) Motorised conveyor belt (length mm 2500) H) System Mod. SILVERPACK 150 LIGHT - S self-dimensioning system for automatic closing (lower and upper) of cardboard boxes. Complete with lower and upper, self-adjusting (with adhesive tape) TAPER. Maximum useful dimensions (external box) mm 1530 x 820 x 1350 (H) and Minimum useful dimensions (external box) mm 300 x 160 x 160 (H) I) 90° Transfer (with rollers and 6 belts) for the outfeed of packed products (mm 1600 x 850 x 700H) L) Inclined conveyor with idle rollers for the accumulation of packed furniture (mm 6000 x 800 x 450H)

Year of construction: 2025, condition: new, Dimensions (L/W/H) 3000x3000x1650 mm Weight 850 kg Hjdpfjv A E Nwox Adwjng Total power requirement 16 kw

Condition: repair required (used), Year of construction: 2013, operating hours: 50,000 h, functionality: limited functionality, overall weight: 19,200 kg, fuel type: electric, color: blue, V2002A VAPOUR RADİAL FAN Production: PİLLER Year of manufacture: 2013 Power: 560kW, 560A, 690 VOLT VFD ACS 800,ABB electric motor RPM: 3806 Dıscharge pressure saturated :1825 mbar Mass flow vapour: approx. 26130 kg/hour Suction side:DN400 Pressing side: DN400 Impeller diameter: 1410 mm, Impeller material: Duplex 1.4462 Overall dimensions: Height 2250 x width:1250 x length:3450mm Net weight with engine: approx. 6.5 t SKF Block bearing : 1036019-09 (squeeze oil damper) V2002B VAPOUR RADİAL FAN Production: PİLLER Year of manufacture: 2013 Power: 630kW, 630A, 690 VOLT VFD ACS 800, ABB electric motor RPM: 3806 Dıscharge pressure saturated:2371 mbar Mass flow vapour: approx. 26710 kg/hour Suction side:DN400 Pressing side: DN400 Impeller diameter: 1410 mm, Impeller material: Duplex 1.4462 Overall dimensions: Height 2250 x width:1250 x length:3615mm Net weight with engine: approx. 7.2 t SKF Block bearing : 1036019-09 (squeeze oil damper) V2002C VAPOUR RADİAL FAN Production: PİLLER Year of manufacture: 2013 Power: 500kW, 500A, 690 VOLT VFD ACS 800, ABB electric motor RPM: 3806 Dıscharge pressure saturated:2900 mbar Mass flow vapour : approx. 27278 kg/hour Suction side:DN400 Pressing side: DN400 Impeller diameter: 1260 mm, Impeller material: Duplex 1.4462 Overall dimensions: Height 2250 x width:1250 x length:3491mm Net weight with engine: approx. 5.5 t SKF Block bearing : 1036019-09 (squeeze oil damper) Microcracks on casings and on impeller B. Hnjdpsxwyaijfx Adwog Air cooling of M3BP 355LKB2 IMB3/IM1003 ( 560 kW ) motor is improved with a higher capacity cooler. Old one is also available.

Condition: new, Year of construction: 2026, Assembly robot BEFARD XGR 800.3 Specification: * full remote control - both operation and drive of the device * three hydraulic extensions with a vertical range of 5.55 m * power supply by a combustion engine (optional additional power supply by a 230 V electric engine or Li-ion batteries) * possibility of simultaneous operation from the 230 V mains and battery charging (for the Li-ion version) * two-circuit vacuum system * maximum lifting capacity 800 kg * 8 vacuum suction cups * rotating frame with suction cups (hydraulically) - controlled by the remote control * lateral shift of the frame with suction cups (right, left 10 cm - hydraulically) * tilting frame with suction cups to the sides (relative to the device - manually or hydraulically) * tilting frame with suction cups (possibility of lifting the element from the horizontal plane and verticalizing it - hydraulically) * non-marking tracks * two working modes - fast and slow * color to choose from Optional additional equipment: * HS spacers * valves * frame tilt with suction cups (hydraulic - remote control) * forks * anti-overload system * hook Hedpeibqr Tjfx Adwjng * LED lamp * 230V wired power supply (for the combustion version). Other models available: XGR800.1 with one hydraulic extension, with a vertical reach of 3.9m XGR800.2 with two hydraulic extensions, with a vertical reach of 4.75m Gasoline engine - VANGUARD brand 10 HP / 5.5 KW

Condition: excellent (used), Year of construction: 2012, 4-Head Embroidery Machine with 12 Needles per Head Sewing speed: 1000 stitches per minute (spm) Distance between heads: 360 mm Embroidery area: 450 × 360 mm Stitch length: 0.1 ~ 12.7 mm (minimum increment 0.1 mm) Automatic thread trimming and thread break detection Power supply: 220 V; 1.1 kVA Machine dimensions: 2320 × 1360 × 1750 mm Hodox Swxzepfx Adwsng Weight: 600 kg OPERATION MANUAL AVAILABLE

Condition: good (used), Plasma torch hose assembly, welding torch, MIG/MAG torch, welding cable, TIG torch assembly, MIG/MAG torch assembly, MIG/MAG welding torch -Hose package: Extension -Length: 20 m -Connector: 8/10-pin / see photos -Transport dimensions: Ø 700 x 280 mm Hedpfx Adex Eiyvewsng -Weight: 24 kg

Condition: excellent (used), MEMBRANE PRESS For overlaying MDF shaped workpieces with PVC, PP and PET With VARIOPIN system Double Automatic front loading/unloading and preparation table (1500 x 2800 mm tray) Max pressure 2,400 KN Working pressure 320 BAR Dimensions of the Platens tables mm 1500 x 2800 Useful working dimensions mm 1250 (or 2 x 600) x 2550 Front loading side from mm 1500 (useful width mm 1250) Hedpfxerwxz Rs Adweng Separate electrical cabinet and controls ( Electronic Programmer SIEMENS SIMATIC Panel Touch Total Installed power KW 50 ca. OPTION: "Paternoster" reels Store (magazine) Unwinder (reels holder) with coating sheet cutting system

Year of construction: 2025, condition: new, Dimensions (L/W/H) 2920x980x1450 mm Weight 1500 kg Total power requirement 11,5 kw Hnedpovz Hzrsfx Adwsg

Condition: used, Membrane press Orma PM/AFT for coating single-sided profiled workpieces with automatic loading and unloading system. Hnodpfx Adew Na Ulswog Max. workpiece size: 2,320 x 1,010 mm power: 33 kW Available: 2

Year of construction: 2013, condition: good (used), functionality: fully functional, For coating / lamination of curved and contoured workpieces Press frame internal dimensions: 2,880 x 1,280 mm Vacuum pump: 25 m³ with vacuum buffer tank Movable on castors Tilting press table Vacuum pump motor: 0.75 kW Vacuum regulator with digital display Hedpfx Aex Dayisdwjng

Condition: good (used), Code: 0037 Brand: OMC - ITALY Model: PL/CONVERSION-S - CE Standard Membrane press with loading on the front side - CE Standard Multifunctional air membrane press, allows extreme versatility in one machine only of all types of finishing of the panel It can be operated as: Cold press Hot press Membrane press for Pvc coating or veneer of shaped panels form one side only Membrane press for Pvc coating or veneer of indentations in the wood Hjdpsv Ab Dwefx Adwsng Technical data: Work platens dimensions 2500 x 1300 mm Perforated steel platens Useful tank dimensions 2350 x 1180 x 50 mm N° 10 pistons - stroke mm 400 Pressure kg/cm2 6.5 Overall dimensions mm 3200 x 1800 x 2700 Weight kg 8000

Year of construction: 2025, condition: new, By installing the heaters, we have gained the possibility to speed up the gluing process. After the press has been heated up, the wrapping process takes 5 to 15 minutes. depending on the thickness of the veneer and the glued element. The process is widely used in factories producing furniture, windows, doors and coffins. The flexible membrane enables the gluing of both flat elements, such as: furniture sides, frames and stiles, as well as shaped elements, e.g. panels, door strips and bent fronts. Hnodpfegp I Upox Adwog Heaters power 2x2.5 = 5 kW Vacuum pump power 0.75 kW Working voltage 400V Number of phases 3 Operating voltage frequency 50 Hz Working vacuum - 0.8 ± 0.05 bar Working temperature 40-50 ± 5 ° С Maximum temperature 60 ± 5 ° С Length 3050 mm Width 1350 mm Height 1600 mm Protection degree IP2X Noise level ≤ 70 dB Weight 350-400 kg Vacuum pump capacity 25 m3 / h Working dimension 3000 x 1350 mm 700% stretch of the membrane Diaphragm thickness 2.7 mm (+/- 0.20 mm)

Year of construction: 2019, condition: good (used), functionality: fully functional, Die cutting, embossing and finishing machine Kama ProCut 76 with CPX Station still in production available immediately Sheet size, max. 760 x 600 mm Die cutting size, max. 743 x 585 mm Hnsdsxzvamspfx Adwog Sheet format, min. 279 x 210 mm Cutting force max. 180 t Gripper margin die cutting 10 mm Speed* 5 500 sheets/h