Used Emulsion for sale (284)

Condition: repair required (used), Year of construction: 2015, functionality: not functional, machine/vehicle number: 2460039, Technical specifications: # Working area: X 300 mm; Y 500 (725) mm; Z 375 mm # Axis configuration: 3 LINEAR AXES (X, Y, Z) + 1 rotary axis (A – rotary table with indexing head) - Direct angular measuring system with up to 50 rpm, accuracy +/- 5” # Maximum workpiece clamping dimension/weight: Ø575 x 830 mm / max. 360 kg # Rapid traverse: X/Y/Z 65/75/75 m/min; Positioning accuracy Tp: 0.008 mm # Spindle center distance: 300 mm # Spindle speed: 1 – 17,500 rpm # Spindle interface: DIN 69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 2 x 32 tools; chip-to-chip average time: 2.5 sec # Maximum tool dimensions: Ø75 mm / length: max. 275 mm / up to 7.5 kg Electrical data: # Mains voltage: 3x400V / 50Hz # Connected load: approx. 85 kVA / 125A Dimensions: # Installation area: approx. 3.6 x 6 x 3.7 m # Weight: approx. 10,500 kg Equipment includes: # CNC control: Siemens 840D SL # Linear measuring systems: Heidenhain linear scales # Chip extractor: Knoll Type 550 K-1 # Oil cooling system # Cooling system for shaft, guides, and control cabinet # 2 oil lubrication systems # Oil filtration system (up to 80 bar): Knoll VRF450-2450 (can supply 2 machines simultaneously) # Oil vapor extraction/recovery system: IFS Vario E2000 (2,000 m³/h) # Fire suppression system: Kraft & Bauer # Part detection P/Y: with low-pressure air monitors # In-process measurement: Marposs T25 # Tool breakage detection and length measurement: inductive sensor # Tool presence monitoring in spindle Machine status: NOT OPERATIONAL - Spindle tool and part presence sensors - Tool breakage sensors - Tool magazine piston and slide system door open/close (2 units) Bwjdexxrnbopfx Alwjp - Tool magazine pistons and tool retainer slide system (2 units) - A-axis position encoder - Inductive and magnetic sensors (4 units each) - Chip extraction conveyor requires repair - Chiller for spindle cooling/heat exchanger - Communication module Murr - X axis linear scale - Emulsion chip conveyor level sensor - Hydraulic pump - Motor for hydraulic pump (repairable) - Heat exchanger unit - Electric Siemens contactors for electrical cabinet (3 units) - Safety door lock Euchner - Emulsion filtration unit is shared with another machine (SW BA321 2460038) Note: Machine is NOT WORKING and offered as described.

Condition: repair required (used), Year of construction: 2015, functionality: not functional, machine/vehicle number: 2460038, Technical specifications: Machining workspace: X 300 mm; Y 500 (725) mm; Z 375 mm Axis configuration: 3 linear axes (X, Y, Z) + 1 rotary table axis (A), index dividing head - Direct measuring system, angular, rotation speed: max. 50 min⁻¹, accuracy: +/- 5'' Maximum clamping/part dimensions: Ø 575 x 830 mm; maximum weight: 360 kg Rapid traverse rates: X/Y/Z = 65/75/75 m/min; positioning accuracy Tp: 0.008 mm Spindle spacing: 300 mm Spindle speed range: 1–17,500 rpm Spindle taper: DIN 69893-HSK-A63 (internal coolant supply) Automatic tool changer: 2 x 32 positions; average chip-to-chip: 2.5 s Maximum tool diameter: Ø 75 mm; maximum tool length: 275 mm; maximum tool weight: 7.5 kg Bwjdpsxxrc Sjfx Alwep Electrical data: - Supply voltage: 3x400 V / 50 Hz - Installed power: approx. 85 kVA / 125 A Machine dimensions: - Installation area: approx. 3.6 x 6 x 3.7 m - Weight: approx. 10,500 kg Equipment includes: - CNC control: Siemens 840D SL - Linear axis measuring systems: Heidenhain linear scales - Chip conveyor: Knoll Typ 550 K-1 - Oil cooling system - Shaft, guideway, and switch cabinet cooling system - 2 oil lubrication systems - Oil mist extraction/recovery system: IFS Vario E2000 (2,000 m³/h) - Fire protection: Kraft & Bauer - Workpiece presence detection (P/Y): Low pressure air sensors - In-process measurement: Marposs T25 - Tool breakage control and length measurement system: Inductive sensor (BRK) - Tool support detection in working spindle Machine status: NOT OPERATIONAL / NON-FUNCTIONAL Installed components: - Sensors for tool presence in spindle & part presence - Hydraulic pump - Hydraulic unit level & temperature sensors (Parker) - Tool magazine piston & sliding door system (2 units) - Communication module: Murr - A-axis position encoder - Hydraulic switches (Parker, 4 units) - Emulsion filtration unit is shared with another machine (SW BA321 2460038) - High-pressure pump from emulsion filtration system

Condition: repair required (used), Year of construction: 2007, functionality: not functional, machine/vehicle number: P-30010522, Technical characteristics: Work Area - Maximum clamping plate diameter: 260 mm - Maximum turning diameter: 260 mm - Maximum machining diameter: 220 mm - Maximum workpiece length: 110 mm - X-axis travel: 570 mm / Rapid traverse X: 60 m/min - Z-axis travel: 200 mm / Rapid traverse Z: 30 m/min - Standard closed automation (number of loading nests by workpiece diameter: 14/(80...200), 18/(30...160), 30/(30...85)) Main Spindle - Spindle according to DIN 55026, Size 6 !!! Brand new, replaced in 2024 !!! - Maximum speed: 4,500 rpm - Power, 100% / 40% duty cycle: 18 / 27 kW - Torque, 100% / 40% duty cycle: 202 / 303 Nm Tool Turret with Driven Tools Bwedpfx Alexxkh Tjwep - Tool holders with cylindrical shank to DIN 69880: 12 - VDI40 - Number of turret stations: 12 - Maximum tool length (including holder): 190 mm - Maximum speed: 6,000 rpm - Maximum torque: 37 Nm (10% duty cycle), 26 Nm (25% duty cycle), 14 Nm (100% duty cycle) Electrical Equipment - Operating voltage: 400 – 480 V - Connected load: 42 kW Dimensions - Overall dimensions: Length = 2,680 mm (3,820 mm with chip conveyor), Width = 2,040 mm, Height = 2,400 mm - Weight: 6,500 kg Main Features and Capabilities: - Vertical design: Optimal chip evacuation and easy loading/unloading - CNC control: GE Fanuc Series 18i TB - High precision: Positioning accuracy in X and Z axes ±0.001 mm (Heidenhain linear scales) - Main spindle: High power and broad speed range - Automated loading/unloading: Integrated automation system for part feeding and removal - Driven tools: Capability for drilling and milling operations - Chip conveyor - Documentation: Electronic unavailable, partial hard copy/manual available Machine status: NOT WORKING - Hydraulic solenoid valves: 4 units - Coolant (emulsion) pump defective

Condition: repair required (used), Year of construction: 2017, functionality: not functional, machine/vehicle number: 179057653, Technical characteristics: Work Area - Chuck diameter: 600 mm - Max. workpiece diameter/height: 450 / 400 mm - Distance from spindle nose to tailstock reference point: 639 mm - X1/X2 axes travel (working stroke): 335/289 mm / Rapid traverse in X: 30 m/min - Z1/Z2 axes travel: 560/494 mm / Rapid traverse in Z: 30 m/min - Fully enclosed with automatic door opening, supporting manual or automatic loading Main Spindle - Spindle according to DIN 55026: Size A6 Bedpfxjxxinfj Alwowp - Max. speed: 4,500 rpm - Power at 100% / 40% duty cycle: 23 / 18 kW - Torque at 100% / 40% duty cycle: 146 / 115 Nm Tailstock - Interface: MK4 - Clamping force: 850 daN - Clamping stroke: 200 mm Turret Configuration X1/Z1: Toolholder with Powered Tools - Cylindrical shank holders per DIN 69880: 8 - VDI40 - Max. tool length: 130 mm - Number of positions: 1 x 8 - Max. speed: 4,500 rpm - Max. torque at 10% / 100% duty cycle: 27 Nm / 14 Nm Turret Configuration X2/Z2: Toolholder with Powered Tools - X-HOT unit for polygonal turning, max. eccentricity (stroke): 8 mm - X-HOT tool clamping system: HSK 32S Electrical Equipment - Operating voltage: 400 V, 100 A - Connected load: 37 kVA Dimensions - Overall dimensions: Length = 3,000 mm (6,477 mm with chip conveyor), Width = 3,000 mm, Height = 3,650 mm - Weight: 11,000 kg Main Features and Capabilities: - Vertical design for optimum chip removal, suitable for manual or automated loading/unloading - Siemens 840D control, NC1 and NC2 axes - High precision: Positioning accuracy in X, Z axes ±0.002 mm (Heidenhain linear scales) - Powerful main spindle with a wide speed range - Live tooling extends machining capabilities to drilling and milling - Tool life monitoring - Chip conveyor: Knoll - Coolant system filtration up to 40 bar: Knoll FKA/1400 - Workpiece presence detection with low pressure sensor - ROBOT AUTOMATION INFRASTRUCTURE INSTALLED - Fully enclosed work area; integrated lighting - Documentation: available both electronically and as hard copy Machine status: Not operational - Missing: valve for emulsion circuit and inductive sensors

Condition: used, Year of construction: 2017, functionality: limited functionality, machine/vehicle number: MW149, Technical specifications: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse in X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse in Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse in Z: 24 m/min Main Spindle - Spindle nose: A2-8 - Maximum speed: Left spindle 3000 rpm - Continuous power (100% duty cycle): Left spindle – 15 kW / Right spindle – 7.5 kW - Maximum swing over bed: 520 mm - C-axis indexing accuracy: 0.001° - Bar capacity: Left spindle – 80 mm / Right spindle – 53 mm Sub-Spindle (Counter Spindle) - Spindle speed: 6000 rpm - Maximum bar diameter: 53 mm - C-axis indexing accuracy: 0.001° - Travel: 520 mm Turret with Driven Tools - Tool interface: Okuma interface - Number of stations: 12-position lower turret, all driven stations - Maximum speed: 4500 rpm, Milling motor power: 4.5 kW Bwjdpsxxiiijfx Alwjp Electrical System - Operating voltage: 400V 3-phase, fuse protection 151A - Connected load: 22.5 kVA Dimensions - Machine dimensions (L×W×H): 3200 × 2200 × 1900 mm - Weight: 5500 kg Main Features and Capabilities: - Horizontal design for optimal chip evacuation - Parts catcher and custom-made parts conveyor strip - Additional emulsion tank with 10 bar pressure for cutting tool cooling - CNC control: OSP-P300L-R - Chip conveyor - Fire protection system - Tool measurement system (Q SETTER) - Broken tool detection: Load force auto learning analyzer, controlled by OSP-P300L-R - Part detection at sub spindle with low-pressure compressed air gauges - Spindle cooling system - Documentation: available electronically and as manual Option: Bar feeder: TopAutomazione FU352SX - Bar feeder dimensions (L×W×H): 3500 × 800 × 1200 mm - Weight: 1500 kg Machine status: Machine operational only with main spindle – sub spindle requires repair.

Condition: used, Year of construction: 2016, functionality: limited functionality, machine/vehicle number: MW127, Technical characteristics: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse Z: 24 m/min Main Spindle - Spindle nose: A2-8 - Max. speed: Left spindle 3000 rpm - Power at 100% duty cycle: Left spindle - 15 kW / Right spindle - 7.5 kW - Max. swing over bed: 520 mm - C-axis indexing accuracy: 0.001° - Bar capacity: Left spindle - 80 mm / Right spindle - 53 mm Counter-Spindle: - Spindle speed: 6000 rpm - Max. bar diameter: 53 mm - C-axis indexing accuracy: 0.001° - Travel: 520 mm Tool Holder with Driven Tools - Tool interface: Okuma interface - Number of tool stations: 12-position lower turret, all positions driven - Max. speed: 4500 rpm / Milling motor power: 4.5 kW Electrical Equipment - Operating voltage: 400V 3-phase, fused at 151A - Connected load: 22.5 kVA Machine Dimensions - Dimensions (L×W×H): 3200 × 2200 × 1900 mm - Weight: 5500 kg Main Features and Capabilities Bsdpfjxxihfjx Alwswp - Horizontal design: optimized chip evacuation, parts catcher and custom-made parts conveyor - Additional emulsion tank with 10 bar pressure for cutting tool cooling - CNC control: OSP-P300L-R - Chip conveyor - Fire protection system - Tool measuring system (Q Setter) - Broken tool detection: Load force auto-learning analyzer controlled by OSP-P300L-R - Part detection at counter spindle: low-pressure compressed air gauges - Spindle cooling system - Documentation: Available electronically and in printed format Machine Status: Currently operating with main spindle only - sub spindle requires repair OPTIONAL: Bar feeder: TopAutomazione model Fu352 SX - Bar feeder dimensions (L×W×H): 3500 × 800 × 1200 mm - Weight: 1500 kg

Condition: repair required (used), Year of construction: 2015, functionality: not functional, machine/vehicle number: MW137, Technical characteristics: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse in X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse in Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse in Z: 24 m/min Main Spindle - Spindle nose: A2-8 - Maximum speed: Left 3,000 rpm - Continuous power (100% duty cycle): Left - 15 kW / Right - 7.5 kW - Maximum swing over bed: 520 mm - C-axis indexing accuracy: 0.001° - Bar capacity: Left spindle - 80 mm / Right spindle - 53 mm Counter-Spindle - Spindle speed: 6,000 rpm - Maximum bar diameter: 53 mm - C-axis indexing accuracy: 0.001° - Travel: 520 mm Tool Turret with Driven Tools - Tool interface: Okuma interface - Number of positions: 12 lower turret stations, all driven - Maximum speed: 4,500 rpm; Milling spindle power: 4.5 kW Bsdpfx Ajxxh Udolwowp Electrical Equipment - Operating voltage: 400V (3-phase), fuse protection: 151A - Connected load: 22.5 kVA Dimensions - Machine dimensions (L×W×H): 3,200 × 2,200 × 1,900 mm; Weight: 5,500 kg Main Features and Capabilities: - Horizontal design: Optimal chip evacuation, parts catcher + custom-made conveyor belt - Additional emulsion tank with 10 bar pressure for cutting tool cooling - CNC control: OSP-P300L-R - Swarf (chip) extraction conveyor - Fire suppression system - Tool measuring system (Q SETTER) - Broken tool detection: Load monitoring with auto-learning analyzer via OSP-P300L-R - Workpiece detection on counter-spindle: Low-pressure compressed air gauges - Spindle cooling system - Documentation: Electronic and print manual available Optional: - Bar feeder: FMB Model: Turbo 10-72XT/3200/A - Bar feeder dimensions (L×W×H): 3,500 × 800 × 1,200 mm; Weight: 1,500 kg Machine status: NOT OPERATIONAL - X-axis encoder: faulty

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: B-8044, Technical characteristics: # Machining workspace: X 800 mm; Y 400 mm; Height from table surface to floor: 850 mm (maximum load 450 kg) # Number of T-slots: 3 / Distance between T-slots: 125 mm / Width of T-slots: 18 mm # Axis configuration: 3 LINEAR AXES (X, Y, Z) + 4th axis # Rapid traverse: X, Y, Z - 30 m/min # Travel: Longitudinal (X-axis): 600 mm, Cross (Y-axis): 400 mm, Vertical (Z-axis): 510 mm Headstock specifications: # Maximum distance spindle to table: 650 mm # Spindle taper: ISO 7388 (with internal cooling), Tool holder: Size 40 # Spindle speed range (standard): 100/14,000 rpm, Max. torque: 63.7/89.4 Nm at 330 rpm Bodpfxsxw Tqzj Alwewp Automatic tool changer: # Number of tools: 20 # Tool selection system: sequential/random # Max. tool diameter (adjacent): 85 mm, Max. tool diameter (non-adjacent): 135 mm # Max. tool length: 300 mm # Max. tool weight: 6.5 kg # Tool change time: 6 seconds (standard), 3 seconds (fast) Electrical connection: # Voltage: 3x400V/50Hz # Installed power: approx. 30 kVA Dimensions: # Floor space required: approx. L 2.1 x W 3.5 x H 3 m # Weight: approx. 4,200 kg Equipment included: # CNC Control: GE Fanuc Series 31i MODEL A # Chip conveyor # Lubrication system # Emulsion paper filtration system: Filber S.L. Model FTH5/10 – 200 l/min # Electrical cabinet cooling system # Spindle cooling system: HARBOR Model HBO-750PTSB2 # Documentation: Electronic and hard copy available Machine status: IN OPERATION

Condition: repair required (used), Year of construction: 2016, functionality: not functional, machine/vehicle number: 107786, Technical characteristics: Work Area - Maximum clamping plate diameter: 160 mm - Maximum turning diameter: 160 mm - Maximum machining diameter: 100 mm - Maximum workpiece length: 150 mm - X-axis travel: 700 mm / Rapid traverse in X: 60 m/min - Z-axis travel: 375 mm / Rapid traverse in Z: 30 m/min - Standard closed automation (number of loading stations per workpiece diameter: 14/(80...200), 18/(30...160), 30/(30...85)) Main Spindle - Spindle as per DIN 55026: Size A5 - Max. speed: 6000 rpm - Power at 100 / 40% duty cycle: 18.1 / 13.9 kW - Torque at 100 / 40% duty cycle: 77 / 59 Nm Tool Turret with Driven Tools - Toolholders per DIN 69880: 12 × BMT65 - Number of stations: 12 - Maximum tool length including holder: 190 mm - Maximum speed: 6000 rpm - Maximum torque at 10% duty cycle: 27 Nm; 100% duty cycle: 14 Nm Electrical Equipment - Operating voltage: 400 - 480 V, 80 A - Connected load: 27 kVA Dimensions - Overall dimensions: Length = 4350 mm (with chip conveyor), Width = 1600 mm, Height = 2500 mm - Weight: 5500 kg Main Features and Capabilities: - Vertical construction: optimal chip evacuation and easy part loading/unloading - Control: GE Fanuc FS 32i B - High precision: positioning accuracy in X and Z axes ±0.001 mm (Heidenhain linear scales) - Main spindle: high power and wide speed range - In-process control: Marposs T25 measurement probe - Automated loading/unloading: integrated automation feeds and removes workpieces - Driven tools: enhances machining capabilities for drilling and milling - Tool life monitoring with sister tool management - Chip conveyor - Fully enclosed work area; workspace lighting - Documentation: Electronic available; physical manual incomplete Machine Condition: NOT WORKING - Operator panel touchscreen needs replacement Bsdpfxexw Slke Alwowp - Hydraulic cylinder for loading door broken - Emulsion pump - Hydraulic pump - Spindle clamp/unclamp sensor - Hydraulic accumulator - Turret motor

Condition: repair required (used), Year of construction: 2011, functionality: not functional, machine/vehicle number: 68178, Technical characteristics: Work Area - Maximum diameter of clamping plate: 260 mm - Maximum turning diameter: 250 mm - Maximum machining diameter: 220 mm - Maximum workpiece length: 200 mm - X-axis travel: 626 mm / Rapid traverse in X: 60 m/min - Z-axis travel: 250 mm / Rapid traverse in Z: 30 m/min - Standard closed workpiece automation via gantry loader and individual nest conveyor system Main Spindle - Spindle interface according to DIN 55026: Size 6 - Maximum speed: 5,500 rpm - Continuous power (100% duty cycle): 38 kW - Continuous torque (100% duty cycle): 300 Nm Tool Turret with Driven Tools - Tool interface: VDI40 DIN 5480 - Number of positions: 12-station disc turret, all positions driven - Maximum speed: 6,000 rpm - Torque capacity per driven station: 70–100 Nm Electrical Equipment - Operating voltage: 2x400 V, 160A GL fuse - Connected load: 90 kW Dimensions - Total dimensions: Length = 3,390 mm; Width = 2,850 mm; Height = 2,400 mm - Weight: 16,000 kg Main Features and Capabilities: - Vertical design: Optimal chip evacuation and easy workpiece loading/unloading - CNC control: Siemens 840D SL - High precision: Positioning accuracy in X and Z axes by Heidenhain linear scales - Main spindle (Weiss): High power and wide speed range - Automated loading/unloading: Parts are loaded and unloaded via integrated automation - Live tooling via Sauter turret: Extends machining capability to include drilling and milling - Cooling and paper filter unit: DGS System GMBH, 950L - Chip conveyor: DGS System GMBH - Hydraulic power unit: Rexroth, flow Q = 13 l/min, max. pressure = 65 bar - Mist extraction units: IFS model IFM1000 - Documentation available: Yes Bwjdpfx Aloxwk Iwowjp Machine Condition: NOT WORKING - Loading/unloading sliding doors defective - Linear scale X axis (2 units) - Turret position sensor (furT30) - Spindle clamp/unclamp sensor - Emulsion solenoid valves (4 units)

Condition: used, Year of construction: 2014, controller manufacturer: Siemens, controller model: 840 Dsl - Operate, _____ Description: Year of manuf. : 2014 Control : Siemens 840 Dsl - Operate Turning diam. : 340 mm Turning length : 1185 mm In General: Year of manufacture:2014 Control system:Siemens 840 Dsl - Operate Swivel diameter:540 mm Turning length:1,185 mm Bar capacity:67 mm Main spindle: Technology:Direct drive spindle Speed:5,000 rpm Power:32 kW Torque:360 Nm Bar capacity:67 mm C-axis:0.001° Chuck:Hainbuch Spanntop Axfix 65 Hydraulic clamping:Differential pressure clamping Clamping cylinder:Hollow clamping cylinder Coolant supply:External (chuck flushing) Sub spindde: Technology:Direct drive spindle Speed:5,000 rpm Power:32 kW Torque:360 Nm C-axis:0.001° Chuck:Hainbuch Spanntop Axfix Hydraulic clamping:Differential pressure clamping Coolant supply:External and internal Tailstock function:Mechatronic control of the sub spindle Tool carrier I (X/Y/Z/B): Technology:Milling spindle on a travelling column Milling spindle speed:12,000 rpm Max. power:22 kW Tool holder:HSK 63 X-axis:450 mm Y-axis:200 mm (+/- 100) Z-axis:1,200 mm B-axis:+/- 110° Position measurement systems:Direct (glass scales) Tool carrier II (X/Y/Z): Technology:Tool turret on cross slide Tool drive:Direct drive Speed:10,000 rpm Power:14 kW Torque:34 Nm X-axis:195 mm Y-axis:80 mm (+/- 40) Z-axis:1,200 mm Tool holder:VDI 40 Number of tool stations:12 Steady rest:SLU2X turret steady rest, 8–101 mm Tool magazin: Technology:Chain magazine Bodozig Tmepfx Alwowp Number of stations:80 Tool changer:Double gripper Equipment: Position sensors:Direct in X1/Y1/Z1/X2/Z2/Z3 Chip removal:Chip conveyor Coolant supply:CTS system, 20 bar Tool monitoring:Easy Tool Monitor Tool measurement:Tool setter, Renishaw Part removal:Part gripper, conveyor belt Bar feeder:Interface Emulsion mist separator:Mechanical Software option I:5-axis simultaneous milling Software option II:Off-centre turning and milling Software option III:Alternating spindle speed Chucks:2x Hainbuch Spanntop

Condition: good (used), Year of construction: 2008, Universal machining center: Fahrständer Machine type: AXA VHC 2 - 1760 XTS Control: Siemens 840 D ShopMill Year: 2008 SPECIFICATIONS Travel X-Axis: 1.760 (2 x 630) mm Y-Axis: 600 mm Z-Axis: 800 horizontal oder 770 vertikal mm A-Axes B-Axes: +/- 100°, hydraulisch geklemmt, stufenlos interpolierend Rapid motion: (X/Y/Z): 40 / 40 / 30 m/min. Amount of controlled axes: 5 Spindle speeds: 30 - 6.000 rpm Spindle power: 30 kW Torque: 143 Nm Tool: SK 40 Toolchanger Tool capacity: 36 NC rotary table: AXA RTA 4L-520 face plate: Ø 520, für vertikalen & horizontalen Aufbau mm Tailstock: manuell, Spitzenhöhe 280 mm Machine weight: 12.000 kg Req. space (LxBxH): 5,2 x 3,4 x 3,3 m Equipment Internal cooling: 30 bar Chip conveyor: links abwerfend, integrierter 200 l Kühlmittelbehälter cooling system Cooling tank: 400 l Bedpfxozimr Aj Alwswp Caliper: 3 D, Renishaw RMP 60 mit RMI Empfänger (kabellose Ausführung) wahlweise Verwendung der Aussenkühlung mit Durckluft oder Emulsion Direct linear scales: Heidenhain Working mode: 4 Flachführungen gehärtet Gegenführungen mit Gleitbelag (Turcite) beschichtet Erneuerung des Gleitbelag des Grundschlittens X/Y in 2022.

Condition: used, Year of construction: 2021, Used MOC cleaning system, type Cleaning System 100. Continuous degreasing system for use with aqueous cleaning agents or emulsions. The machine is powered and can be inspected by appointment! Technical data: Year of manufacture: 12/2021 Manufacturer: MOC External dimensions: Length, max.: 1,500 mm Width: 1,500 mm Overall height: 1,700 mm Infeed height: 900 mm Usable size: Width: 650 mm Height: 300 mm Belt design: wire mesh in stainless steel Energy data: per station Power: 2 kW Pressure, max.: 3 bar Caustic solution flow rate: 7.5 m³/h Bwsdpfxszicl Ee Alwep Transport drive: 0.5 kW Max. load: 20 kg/m Speed: 1.4 m/min, adjustable with oscillation Tank volume: approx. 500 l Heating: 18 kW Connected load: approx. 25 kW Material: Stainless steel 1.4301, all parts in contact with the medium or corrosion-resistant Special features: Cabin structure: in a robust steel construction and with all necessary inlet and outlet connections including a 100 µm filter in the return line and sludge collection rings with drain and overflow 1 heating unit with thermostat, electric 1 complete pumping unit, piped Pump with base plate and motor 1 set of nozzles 1 set of PVC aprons, easily removable 1 drain per tank with manual ball valve 1 blow-off station with on-site compressed air, flat jet nozzles and air ducting Electrical control cabinet The control cabinet contains all contactors and fuses with VPS control

Condition: used, Year of construction: 2009, CNC grinding machine Type/Model: Ri 8-4 Year of manufacture: 2009 Operating hours: 25,726 h Technical data Round table diameter: 800 mm Grinding diameter max.: 1100 mm Workpiece diameter max.: 1120 mm Workpiece height max.: 550 (700) mm Plunge depth max.: 300 mm Table load max.: 1500 kg Round table (C-axis) & guide Bearing: Hydrostatic guides in the X and C axes for maximum damping and wear-free operation Table drive: Direct drive Speed range: 0.01 to 200 rpm Positional accuracy: ± 1.5 arc seconds (smallest increment: 0.0001°) Tool holder & spindle (turret head) Number of spindle positions: up to 4 grinding spindles/tool positions in the automatically swiveling turret head CNC control & axis drives Standard control: Siemens Sinumerik 840D with extended Kehren application software X-axis: Linear drive Travel ranges (approximate values) X-axis (horizontal): approx. 1,200 mm Z-axis (vertical): approx. 700 mm Dimensions & weight Machine weight: approx. 20,000 kg + peripherals Bsdpfezh Hrtex Alwjwp Equipment: - Coolant lifting unit Knoll FHA/300 - Emulsion mist separator Handte EM-DS - Platform with motor-adjustable platform for tool changes

Condition: ready for operation (used), Year of construction: 2012, operating hours: 75,685 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 85 mm, travel distance Z-axis: 280 mm, spindle motor power: 20,000 W, controller manufacturer: SIEMENS, number of axes: 7, This 7-axis Index ABC horizontal turning machine was manufactured in 2012. It features a main spindle with a maximum speed of 6000 rpm and a sub spindle with a speed of 4500 rpm. The machine includes two turrets, each equipped with X and Z axes, and a powerful tool drive. If you are looking to get high-quality turning capabilities, consider the Index ABC machine we have for sale. Contact us for further details. • Main spindle: D65, spindle interface AD140, ID83, max speed 6000 rpm; max power 20 kW at 100% duty cycle; C-axis; electronic synchronization between spindles • Sub spindle: 7.5" chuck interface, max speed 4500 rpm • Spindle hours: • S1 – 18914h • S2 – 661h • S3 – 3h • S4 – 29211h • S5 – 2413h • S7 – 1250h • The synchronous spindle was renewed in September 2024 • Chuck: 3-jaw KFN95/3, clamping force 480 daN, max 4000 rpm • Turrets: two turrets each with X and Z axis; tool drive on turret 6000 rpm, 3.3 kW • Rear working attachment: without quill, 5 quill positions Bwedpfxozim Eco Alwep • Coolant: 80 l/min at 8 bar and 20 l/min at 18 bar; system prepared for emulsion; coolant return at spindle end D60 (without bar feed) • Control: INDEX C200-4D based on Siemens 840D; color display 26 cm; thread cutting without compensating chuck; motor-current-based tool monitoring; internal tool management and setup dialog; extended machining cycles; parts counter and production monitoring • Power/connection data: 400 V, 50 Hz TN network; total connected load 45 kVA; rated power 38 kW; rated current 65 A; max fuse protection 100 A • Hydraulic hollow clamping cylinder D65 Additional equipment • Chip conveyor: hinged belt, discharge height 1250 mm • Bar feeder: MBL 65/3700 for spindle height 1010 mm; bar diameters up to 65 mm; bar feeder length 3700 mm; guide channel system with rolling bearings; loading rods (Ø12 mm and Ø20 mm, length 1400 mm); guide sets for 14–18 mm, 18–22 mm, 22–65 mm • Workpiece unloading device for main and sub spindle with part catcher • Teleservice preparation (ISDN) with software • Machine prepared for extraction system 230 V • Working area light • Two electrical cabinet cooling units • Transformer 3 kVA Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: repair required (used), Year of construction: 2009, functionality: limited functionality, machine/vehicle number: 305484, saw blade diameter: 450 mm, cutting height (max.): 160 mm, feed length X-axis: 2,000 mm, cutting range round steel at 45°: 150 mm, cutting range round steel at 90°: 150 mm, type of input current: three-phase, cutting range square steel at 45°: 140 mm, cutting range square steel at 90°: 140 mm, CNC cold saw from the renowned brand Kaltenbach, model KKS 401 NA 2000. There is a lot of technical data to list, so I have uploaded several photos with the basic specifications for you to get an overview of the saw’s capabilities. This is a rare model equipped with a feeder (individual lengths) from 0-2000mm, and for repeat operations from 2000-9999mm. Automatic zeroing before cutting. The CNC saw head features automatic rotation of +/-60 degrees, two types of lubrication (emulsion and direct spray application). You can select between ejection of cut pieces via a small parts ejector or by a chain ejector with a drop-down function for longer and heavier sections. The safety fence assembly with IC barriers and numerous spare parts are included with the saw (not shown in the pictures as it is not currently mounted). All original documentation is provided and corresponds to the machine's serial number, ensuring straightforward installation without guesswork. Bwedpfsyk Inpex Alwep Explanation of the issue: the saw is connected to electrical power and every individual function (of which there are many) works perfectly. The problem occurs during automatic operation, most likely due to program parameter issues (it uses the Windows platform). I have not found a suitable programmer willing to learn on my machine. Possible solution: I have contacted the saw manufacturer and they referred me to their authorized service provider, whose contact details I can supply to the prospective buyer. Estimated repair costs in Serbia range from €3000 to €5000; if you are closer to Germany or the Czech Republic, the expenses are significantly lower. Therefore, there are two price categories: if you purchase the machine as is, the listed price applies; if I resolve the issue, the price will be considerably higher. The listed price includes professional dismantling and loading onto the truck (a significant cost factor that is far from negligible); transportation is at the buyer’s expense. I hope this clarifies the current condition of the machine to some extent. Wishing you a successful purchase.

Condition: excellent (used), functionality: fully functional, Anton Paar Physica MCR 301 Modular Rotational Rheometer Manufacturer: Anton Paar GmbH Type: Physica MCR 301 Machine Type: Modular Rotational and Oscillatory Rheometer Country of Origin: Austria (Graz) For sale is a used Anton Paar Physica MCR 301 rotational rheometer. This laboratory device is suitable for the rheological characterization of liquids, pastes, polymers, dispersions, emulsions, and other materials in research, development, quality control, and industrial material testing. Technical Data Measuring Principle: Rotational and Oscillatory Rheometer Drive: Air-bearing EC servo motor (Air Bearing Technology) Integrated normal force measurement Modular measuring system for various measuring geometries Power Connection: AC 100–240 V Power Frequency: 50–60 Hz Power Consumption: 850 W Dimensions: approx. 610 × 420 × 670 mm (L × W × H) Weight: approx. 48 kg Measuring Functions Rotational measurements Oscillatory measurements Bwodpfx Aljzicwuowsp Viscosity measurements Flow curves Shear stress Creep tests Relaxation measurements Amplitude sweeps Frequency sweeps Material characterization Software / Interfaces Anton Paar Rheoplus Software (Original CD) Device driver and license diskette included RS-232 interface Ethernet interface (depending on the configuration) Operation via LCD display and foil keypad Environmental Conditions Operating Temperature: 15 °C to 35 °C Recommended ambient temperature: 23 °C ±3 °C Storage Temperature: −20 °C to +50 °C Relative Humidity: 20–60 % (non-condensing) Equipment Air-bearing precision drive Measuring head Measuring platform LCD display Electronic control Rheoplus software CD Original operating manual Documentation folder License diskette Connection cable Accessories as shown in the pictures Application Areas Rheology Material testing Quality assurance Research and development Chemical industry Pharmaceutical industry Cosmetics industry Food industry Polymer technology Universities and testing laboratories Condition Used Optical condition as shown in the pictures. Scope of Delivery Anton Paar Physica MCR 301 Original Rheoplus software CD Original operating manual Documentation folder License diskette Connection cable Accessories as shown in the pictures Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: used, Year of construction: 2017, controller manufacturer: Siemens, controller model: 840 Dsl, _____ Description: Year of manuf. : 2017 Control : Siemens 840 Dsl Grinding length : 1000 mm In General: Year of manufacture:2017 Control system:Siemens 840 Dsl Centre height:180 mm Centre distance:1,000 mm Maximum workpiece weight:150 kg X-Axis: Technology:Electromechanical Transverse speed:0.001 – 8,000 mm/min Measuring system:Direct, 0.0005 mm (glass scale) Guideway:Hydrostatic Z-Axis: Technology:Electromechanical Table speed:0.01 – 12,000 mm/min Measuring system:Direct, 0.0005 mm (glass scale) B-Axis: Technology:Continuously swivelling axis Resolution:0.001° Clamping:Hydropneumatic Workpiece spindle: Power:2.0 kW Speed:0–600 rpm Chuck:MK 5 and KK 5 C-axis:0.001° Grinding spindle: Disc configuration:left/right Power:9 kW Speed:1,400 rpm Internal grinding spindle: Power:2.2 kW Speed:60,000 rpm Bwedpfozhdybsx Alwsp Tail stock: Quill stroke:40 mm Mounting:MK 4 Quill retraction:Hydraulic Cylinder fine adjustment:Yes Equipment: Coolant supply:Coolant system with filter Emulsion mist separator:Mechanical Grinding wheel dresser:Diamond dressing tile Technology option I:Cone grinding Technology option II:Out-of-round grinding Balancing system:Automatic Grinding detection:Via structure-borne sound Workpiece measurement:Linear encoder Accessories:Various flanges, discs and mandrels

Condition: new, functionality: fully functional, power: 10.4 kW (14.14 HP), gearing type: other, fuel type: diesel, color: green, axle configuration: 1 axle, emission class: none, brakes: other, Year of construction: 2026, Equipment: low noise, TICAB BM Combo – Two Machines in One. Maximum Efficiency on Every Road Project. The TICAB BM Combo is a powerful dual-function bitumen machine engineered for professional road construction and maintenance. It combines a 750 L bitumen emulsion sprayer and a 120 L crack sealing unit in one compact, trailer-mounted solution — giving contractors and municipalities everything they need to work faster, smarter, and more profitably. 🚀 Why TICAB BM Combo Increases Your Profitability ✔ 2-in-1 System – Save money by replacing two separate machines with one high-performance unit ✔ Faster Job Completion – Spray and seal with maximum efficiency ✔ Precise Application – Uniform coverage ensures professional results ✔ Reduced Operating Costs – Diesel engine with hydraulic system for reliable, energy-efficient operation ✔ Built for Heavy-Duty Work – Designed for demanding municipal and industrial projects Key Advantages 750 L bitumen emulsion sprayer + 120 L crack sealing unit Diesel-powered engine with integrated hydraulic pump & heating system Automatic temperature control for optimal material performance Hand wand and wide spray bar for flexible application Flushing system for easy cleaning and maintenance Fully mobile, trailer-mounted design for quick transport between sites Rugged construction for long-term, intensive use Ideal For: Road and highway construction Asphalt paving preparation & tack coat application Pothole repair and crack sealing Surface dressing & waterproofing Municipal roads, parking lots, industrial zones, airports, bike paths, and more Bjdpfx Aljx U Am Nswswp Why Choose TICAB? Manufactured by TICAB – a trusted European road equipment brand, the BM Combo is engineered for professionals who demand reliability, efficiency, and long-term performance. With one machine, you reduce equipment costs, minimize downtime, and maximize productivity — all while delivering flawless asphalt and bitumen application. 📞 Get Started Today Contact us now for pricing, availability, delivery options, and full technical specifications.

Condition: new, functionality: fully functional, power: 7.5 kW (10.20 HP), fuel type: diesel, color: green, empty load weight: 2,300 kg, emission class: none, mast type: other, brakes: other, Year of construction: 2026, Equipment: hydraulics, CAB RA 800 | Mini Asphalt Plant & Asphalt Recycler for On-Site Hot Mix Production Process RAP (Reclaimed Asphalt Pavement), heat materials evenly with a diesel-fired system, and deliver consistent hot mix wherever the job requires — from municipal streets to highways and industrial sites. Bsdpfx Alox Uqfyjwowp Designed for pothole repair, asphalt patching, crack filling, and road resurfacing, it is the ideal solution for fast, cost-effective pavement maintenance. The TICAB RA 800 combines the power of a mini asphalt plant with the efficiency of an asphalt recycler, allowing you to produce high-quality hot mix asphalt directly on site. 🔧 Key Features On-site RAP recycling and hot mix asphalt production Output up to 800 kg/h for medium-scale repair works Diesel-fired heating system with precise temperature control Compact, mobile design for easy transport and field operation Supports bitumen emulsion, tack coat, and recycled asphalt pavement Durable construction for long-term, heavy-duty use ✅ Applications Asphalt recycling and RAP processing Pothole repair, patching, crack filling, and resurfacing Municipal roads, highways, parking lots, driveways, bike paths, and industrial pavements On-site hot mix production without the need for a stationary plant 🚀 Why Choose the RA 800? The RA 800 reduces material costs, eliminates transport delays, and enables crews to work efficiently with fresh hot mix asphalt anytime, anywhere. It’s a versatile, reliable solution for contractors, paving companies, municipalities, and civil engineering teams focused on productivity and pavement durability. 📩 Contact us for pricing, delivery options, and full technical specifications.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Technical Data: Compressed Air Connection: R 3/8" / 6 bar Machine Connection: R 1/4" approx. 6 bar Operating Pressure: approx. 600 l/min at 6 bar Air Consumption per Cycle: Electrical Connection: 3 x 400 V +/- 5 % / 50 - 60 Hz Control Voltage: 24 V DC Rapid Traverse: X-Y-Z Feed Rate, Stepless: 40 m/min Feed Rate: 0 - 5000 mm/min Tool Change: Chain changer with 30 tool positions Tool Holder: SK 40 Tool Clamping: SK 40, hydraulic Coolant System: Emulsion, 300 l, 100 Spindle Speed: 100 - 18000 min-1 Speed Correction: 80 – 120 % Drilling Performance in St 60 / Aluminum: up to 36mm Ø Threading Performance in St 60 / Aluminum: up to M30 Travel Measuring System: Encoder/Length Measuring System Positioning Accuracy: 0.025 mm Bwjdpfx Aszhiggjlwsp Repeatability: 0.015 mm Control: HEIDENHAIN ITNC 530 Data Interface: V 24/RS - 232 - C Travel Ranges X / Y / Z axis: 3200 / 450 / 590 mm Working Area X / Y / Z axis: 3000 / 700 / 500 mm Space Requirement with Safety Fence: approx. 44 m² (8.0 x 5.5 m) Machine Weight with Accessories: approx. 13 tons Sound Emission: Average sound pressure level 79 dB (A) Under the Following Conditions: - Measurement Method: - Operating Condition:

Condition: used, Year of construction: 2012, controller manufacturer: Fanuc, controller model: MXP-200FP - ManualGuide, _____ Description: Year of manuf. : 2012 Control : Fanuc MXP-200FP - ManualGuide Speed : 6000 rpm Movement X/Y/Z : 2100/1020/762 mm Tool holder : SK 50 In General: Year of manufacture:2012 Control system:Fanuc MXP-200FP ManualGuide Traverse paths X/Y/Z:2,100/1020/762 mm Bsdozf T I Nopfx Alwjwp Spindle speed:6,000 rpm Tool holder:SK 50 Clamping surface:2,300 x 1020 mm Spindle: Technology:Geared spindle Speed:6,000 rpm Max. power:approx. 22 kW Max. torque:approx. 550 Nm Tool holder:SK 50 Work table: Clamping surface:2,300 x 1020 mm Max. table load:3,000 kg T-slots:6x 22 mm, spacing 150 mm Tool magazin: Technology:Chain magazine Tool changer:Double gripper Number of stations:40 pieces Tool diameter max.:120/240 mm Tool length max.:350 mm Equipment: Chip disposal: Chip conveyor Coolant supply:IKZ pump with filter Emulsion mist extraction:Mechanical Set-up mode:Electronic handwheel Accessories:2x magnetic clamping plate 800 x 400 mm Tool holders:Various SK 50 holders

Condition: ready for operation (used), Year of construction: 2010, operating hours: 5,891 h, functionality: fully functional, CNC lathe – cycle-controlled with turret | Brand: DMT Kern Type: CD 322 | Year of manufacture: 2010 5 axes (X+Z+C-axis, main spindle, driven tool) The machine can be inspected under power by prior appointment. The machine was used exclusively for training purposes. Condition: Fully functional / ready for operation (well-kept condition). Operating hours (June 19, 2026): 5.891 h Bjdpfxezf Nkte Alwewp TECHNICAL SPECIFICATIONS: Working range: - Swivel diameter over bed: 320 - Swivel diameter over cross slide: 150 mm - Cross slide travel: 200 mm Centre distance: - Longitudinal slide travel: 750 mm Main spindle drive: - Power: Digital AC motor – 50/60/100% duty cycle: 16/15/12 kW - Number of gear stages: 2 Spindle head: - Spindle head DIN 55027 / Bore: Size 6/Ø 64 mm - Spindle Ø at front bearing: Ø 100 mm - Speed range (constant V): 1 – 3.000 rpm - Standard chuck sizes: 200/250 mm Cross slide: - Transverse feed range: 0,001 – 1.000 mm/rev - Longitudinal feed range and thread pitches: 0,001 – 2.000 mm/rev - Transverse rapid traverse: 5 m/min - Longitudinal rapid traverse: 10 m/min - Transverse feed force: 5.000 N - Longitudinal feed force: 7.000 N Tailstock: - Quill diameter: Ø 60 mm - Quill travel: 140 mm - Tool holder taper: MK 4 Electrical specifications: Three-phase current: 400 V, 50 Hz Dimensions / Weight: - Machine Length/Width/Height: 2,44 x 1,66 x 1,7 m - Control cabinet Length/Width/Height: 1,2 x 0,5 x 1,7 m - Machine weight: approx. 2,1 tons EQUIPMENT / ACCESSORIES: - CNC control: HEIDENHAIN MANUALplus 620 - Automatic 8-position tool disc turret * Tool holder DIN 69880, Ø 30 mm, mounted on the rear cross slide, plus Multifix B at the front * Drive speed adjustable, max. 4.000 rpm - C-axis with drilling, milling and engraving cycles and free ICP input - Axial and radial tool holders for driven tools: * Shank to DIN 69880, Ø 30 mm * With collet chuck to DIN 6499, 430E * Clamping range 1–16 mm - Collet chucks for driven tool holders * with DIN 69880 shank, Ø 30 mm * Clamping range 1–16 mm in 1 mm increments - 1 set of tool holders to DIN 69880, Ø 30 mm - Mk 4 rotating centre point - Tailstock roller guide (for easier movement of the tailstock) - Oil sump - Flushing gun - Coolant pump, frequency-controlled (instead of standard pump) * Manually infinitely adjustable via a selector switch on the machine control panel from 1 bar/10 l/min – 4 bar/20 l/min - Oil skimmer for coolant cleaning - Second chip protection door - Special cladding, machine fully enclosed on the right-hand side - Oil-emulsion mist filter for the working area extraction system - Main motor fan control, temperature-controlled - Operating mode 4 “Process monitoring” for 5 axes, (X+Z+C axes, main spindle, driven tool) - Coolant system, pump capacity 1 bar, 8 l/min - Brake on the main spindle for changing jaws/chucks - Axial stop in the main spindle - Collet clamping device, for steel compression collets * max. 4.000 rpm * DIN 55027 shank, size 5, clamping range: Ø 3–42 mm - Documentation - CE marking No guarantee is given as to the completeness or accuracy of the technical specifications or the equipment. - Subject to prior sale -

Condition: used, Year of construction: 2011, controller manufacturer: Fanuc, controller model: 30i, _____ Description: Year of manuf. : 2011 Control : Fanuc 30i In General: Year of manufacture:2011 Control system:Fanuc 30i Maximum table load:100 kg Travel range X/Y/Z:300/300/370 mm Installation weight:approx. 33,000 kg Machining station I (X/Y/Z/B): Technology:1 x vertical spindle Speed:8,000 rpm Tool holder:HSK-A 63 Power:31 kW Torque:197 Nm Tool changer:12 stations B-axis:0.001°, pneumatic indexing, clamping force Tool diameter/length:125/250 mm Machining station II (X/Y/Z/B): Technology:1 x vertical spindle + 1 x horizontal spindle Speed:8,000 rpm Tool holder:HSK-A 63 Power:31 kW Torque:197 Nm Tool changer:12 stations B-axis:0.001°, pneumatic indexing, clamping force Tool diameter/length:125/250 mm Machining station III (X/Y/Z/B): Technology:1 x vertical spindle Speed:8,000 rpm Tool holder:HSK-A 63 Power:31 kW Torque:197 Nm Tool changer:12 stations B-axis:0.001°, pneumatic indexing, clamping force Tool diameter/length:125/250 mm Machining station IV (X/Y/Z/B): Technology:1 x vertical spindle + 1 x horizontal spindle Speed:8,000 rpm Tool holder:HSK-A 63 Power:31 kW Torque:197 Nm Tool changer:12 stations B-axis:0.001°, pneumatic indexing, clamping force Tool diameter/length:125/250 mm Bedpjzfu Rfofx Alwjwp Loading station: Numbers:2 pieces (front and rear) Equipment: Position measurement systems:Direct on all axes Chip removal:Chip conveyor Coolant supply:IKZ system, 30 bar Tool breakage monitoring:Artis, type CTM V5 Zero-point clamping system:Erowa Emulsion mist separator:Reven

Condition: used, Year of construction: 2006, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Face slide travel: 380 mm Bjdpfszfmu Njx Alwjwp Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Tool holder system (DIN69880) VDI40 Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600