Used Emulsion for sale (258)

Condition: reconditioned (used), Year of construction: 2023, All wear parts new only 704 operating hours Special price for a low-hour demonstration unit Base machine: €29,990 net Optional extras (for an additional charge): - Cooling unit: €3,995 net - Emulsion tray: €3,990 net The hydraulic briquetting presses of the MPP NEM series compact materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are distinguished by their robust construction, ensuring consistent briquette quality during continuous operation. The pressing process does not require any binding agents – compaction is achieved solely through hydraulic pressing force. Depending on material, the feedstock volume can be reduced by up to 90%. Throughput capacity: maximum 70 kg/h (depending on material) Briquette diameter: Ø 50 mm Motor: 5.5 kW 400 Volt / 50 Hz / 3-phase Pump: 40 liters Maximum briquette length: 50 mm Optimal briquette length: 40 mm Silo diameter: 1,000 mm Oil tank: 110 liters Dodjd N Dnhspfx Addsla Dimensions: 1750 x 1130 x 1100 mm (L x W x H) Weight: 950 kg Hydraulic pre-compaction via slide Main press cylinder Vertical cylinder Fill level sensor: yes Feed material requirements: - Max. chip length: 15 mm - Installation room temperature: heated space, at least +5°C - Max. load on agitator: 150 kg - Feed material must be free from magnetic metals and mineral contaminants such as sand, stones, etc. Damage to pressing tools and/or increased wear may otherwise occur.

Condition: like new (used), Year of construction: 2021, operating hours: 37 h, functionality: fully functional, machine/vehicle number: 21001926, overall weight: 1,110 kg, total width: 1,510 mm, total length: 2,060 mm, total height: 3,000 mm, noise level: 71 dB, filter area: 76 m², Equipment: type plate available, Filter tower for oil and emulsion mist extraction and filtration for local ventilation. Modular system with permanent filter cartridges and two integrated, sound-insulated EC fans, adjustable via ESTA EasyControl, for installation in the work area. Application: Oil and emulsion mist extraction The unit has only 37 operating hours and is therefore as new Djdpfx Asww Itmjddela Original net price: €24,000 Sale only for self-collection and without warranty

Condition: used, Year of construction: 2017, Knoll Filtration System / Vacuum Filter Type: VRF 250 Areas of Application: - Cleaning of coolants and lubricants (KSS), emulsions, and cutting oils without the use of disposable filter materials. - Installation on machine tools for single machines, machine groups, and central systems. Function: A vacuum pump, directly connected to the inner chamber of a filter drum, draws the medium into the drum's interior. Contaminant particles are retained on the filter drum’s surface by a fine mesh. The vacuum level increases due to the resistance of the accumulating filter cake. Upon reaching an adjustable vacuum threshold, drum cleaning is performed automatically. An installed scraper chain transports the sludge out. Dlodpfx Adjxup I Dodja Type: VRF 250 Design: AA Filtration capacity (emulsion/oil): 250 / 150 Inlet (DN): 50 Tank volume (l): 1350 / 1450 Shipping available by arrangement for a fee or collection possible.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, number of spindles: 6, bar diameter (max.): 22 mm, Equipment: rotational speed infinitely variable, 8-spindle Double NCU Slide unit 1.1: X-axis and Z-axis NC-controlled Slide unit 1.2: X-axis and Z-axis NC-controlled Slide unit 2.1: X-axis and Z-axis NC-controlled Slide unit 2.2: X-axis and Z-axis NC-controlled Slide unit 3.1: X-axis and Z-axis NC-controlled Slide unit 3.2: X-axis and Z-axis NC-controlled Slide unit 4.1: X-axis and Z-axis NC-controlled Slide unit 4.2: X-axis and Z-axis NC-controlled Slide unit 5.1: X-axis and Z-axis NC-controlled Slide unit 5.2: X-axis and Z-axis NC-controlled Dodpfx Asxur Srjddela Slide unit 6.1: X-axis and Z-axis NC-controlled Slide unit 6.2: X-axis and Z-axis NC-controlled Slide unit 7.1: X-axis and Z-axis NC-controlled Slide unit 7.2: Swivel axis and Z-axis NC-controlled Slide unit 7.3: X-axis NC-controlled, Z-axis fixed Slide unit 8.1: Swivel axis and Z-axis NC-controlled Slide unit 8.2: X-axis and Z-axis NC-controlled Slide unit 8.3: X-axis NC-controlled, Z-axis fixed Synchronization device at position 7.2 Synchronization device at position 8.1 Rear-side machining at positions 7.3 and 8.3 possible with three fixed and two driven positions Index loading magazine MBL228/3300 bundle loader Hinged belt chip conveyor Three-jaw chuck Röhm for synchron spindle Workpiece conveyor belt at spindle position 7 Workpiece conveyor belt at spindle position 8 Fire extinguishing system Büchel coolant emulsion extraction system

Condition: used, Year of construction: 2007, controller manufacturer: Siemens, controller model: 840 D, _____ Description: Year of manuf. : 2007 Control : Siemens 840 D Turning diam. : 250 mm Turning length : 650 mm In General: Year of construction:2007 Control:Siemens 840 D Bar capacity:65 mm Turning diameter:350 mm Turning length:650 mm Main spindle: Technology:Motor spindle Speed:5,000 rpm Power max.:35 kW Torque max.:370 Nm C-axis:0.001 Bar capacity:65 mm Chuck:Hainbuch Spanntop size 65 Clamping cylinder:Hollow clamping cylinder Sub spindle: Technology:Motor spindle Speed:5,000 rpm Power:26 kW Torque:290 Nm Dodsxtr Iwjpfx Addela C-axis:0.001 Chuck:Hainbuch Spanntop size 65 Clamping cylinder:Partial hollow clamping cylinder Z-axis:670 mm X-axis:175 mm Tool carrier i (X/Y/Z): Technology:Tool turret, 12 stations Tool holder:VDI 30 Tool drive:4,000 rpm, 11 kW, 28 Nm X-axis:300 Y-axis:80 mm ( +/- 40 mm) Z-axis:650 mm Tool carrier II (X/Z): Technology:Tool turret, 12 stations Tool holder:VDI 30 Tool drive:4,000 rpm, 11 kW, 28 Nm X-axis:180 Z-axis:650 mm Equipment: Chip disposal:Chip conveyor Coolant supply:IKZ system Measuring systems:Direct in all X-axes (glass scales) Bar loader:IRCO Breuning Part removal:Finished part gripper + indexing belt Emulsion mist separator:Mechanical Set-up mode:Electronic handwheel

Condition: like new (used), Year of construction: 2012, machine/vehicle number: IntNr231419, As-new, completely overhauled CNC 5-axis vertical machining centre DMG DMU 40 eVo linear, year of manufacture 2012, IntNr231419 Control system Brand: HEIDENHAIN Model: 530 Main drive Spindle speed range: 14,000 rpm Number of axes: 5 Dlodjxt Rtlepfx Addsa Travel distances X-axis travel: 400 mm Y-axis travel: 400 mm Z-axis travel: 375 mm Includes: - Automatic tool changer with 120 SK 40 tool holders - Table rotary feed-through for workpiece clamping - Side door for robot loading - Renishaw tool breakage monitoring - Heidenhain measuring probe - High-pressure coolant system (IKZ) with 600 l tank - Emulsion extraction system - Active spindle cooler - Linear drives for X and Y axes - Glass scales The machine can be inspected under power by appointment. Subject to prior sale and changes or errors in technical data and specifications!

Condition: new, power: 375 kW (509.86 HP), overall weight: 32,000 kg, fuel type: diesel, axle configuration: > 3 axles, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,800 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal number: #307 MAN TGS 35.510 8x4-4 BL Kroll K 1,0-18,0 /36PESP, suction cup superstructure * KROLL * Tank material S355J2+N (St. 52.3) * ADR suction/pressure tanker K 1.0-18.0 /36PESP * 18,000 liter tank size (air volume) * 15,000 liters sludge volume I 3,000 liters emulsion chamber * 1,000 liters rinsing water volume (unpressurized) * Emptying with discharge piston Chassis* MAN TGS 35.510 8x4-4 * 8x4-4 BL * TipMatic * 510PS/375KW * 2600 Nm * EURO 6 * Fuel volume 400l * Chassis color RAL 9010 pure white * Color cab RAL 9010 pure white * 2x LED rotating beacons on the cab * Reversing camera * Navigation * Air conditioning * Cool box Vacuum system* CVS VacuStar W1600 approx. 1,550cmb/h at 400mbar * Approx. 30m suction hose DN80 on the tank lid with announcements High pressure system* Speck P52/100-150 100l/min at 400mbar * Small hydraulic HP hose reel for 60m DN 13 hydraulic * Approx. 60m DN 13 flushing hose Dljdpfjvh H Hbsx Addea Special features* ADR version L4BH type class FL incl. EX/II, EX/III and AT * Suction connection pre-piston chamber DN100 remote-controlled. * Manhole FN500 on the left side * HP gun * Noise protection cladding in front of the pumps left and right * Removable and swiveling halogen work lights * LED ambient lighting * Radio remote control with two batteries * Tiltable scrap box * Rear view camera * Ladder with bracket and anchor points * Advertising panel on the left and right of the container Technical data* GGW 32,000KG * Length 10,700mm * Height 3,800mm * Width 2,550mm * Wheelbase 3,900mm For more detailed information and/or pictures please contact us directly. You can find a large selection of other vehicles to BUY or RENT under: Subject to changes, prior sale and errors excepted. The buyer is obliged to independently check the condition and equipment of the goods. The sale is subject exclusively to our general terms and conditions and to the exclusion of any warranty. For further detailed information and/or pictures, please contact us directly. You can find a large selection of other vehicles to BUY or RENT under: Subject to changes, prior sale and errors excepted. The buyer is obliged to independently check the condition and equipment of the goods. The sale is subject exclusively to our general terms and conditions and to the exclusion of any warranty.

Condition: excellent (used), Becomix Universal Homogenising Mixer Model RW3000, Capacity 3000 lts, Complete with piping and control panel. Dodex Dnilepfx Addela Universal mixer for various cosmetic and pharmaceutical products Application: Low to very high viscosities - For example, creams, ointments, emulsions, toothpastes, gel products, mascara, make-up. Properties: Homogeniser with internal and external circulation, Anchor agitator with scrapers for horizontal and vertical mixing Short heating and cooling times, Hygienic and dead space-free construction, CIP/SIP, ATEX zone 2 to 0 possible, cGMP

Condition: good (used), Karpowicz NK 114S Injector with screw pump Pickle injector is appliance designed to intramuscular induction of pickling brine into meat with bone or into meat without bone. Special screw pump can inject pickling brine and dense pickling emulsion. Manufacturer: Karpowicz Model: NK 114S Year: Number of injecting needles (pcs): 114 Number of rows of needles (pcs): 6 Type of pump: Screw pump Height of needle lift: 190 mm Belt width: 600 mm Machine Dimensions LxWxH: 2.600x1.500x2.200 mm Machine Weight: 1.200 kg. Djdpfoxy If Esx Addjla

Condition: used, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 4123479, saw band length: 2,450 mm, saw band width: 9 mm, total height: 27 mm, type of input current: three-phase, cutting range round steel at 45°: 150 mm, cutting range round steel at 90°: 220 mm, overall weight: 225 kg, working height: 915 mm, cutting range square steel at 90°: 210 mm, cutting range square steel at 45°: 150 mm, space requirement width: 870 mm, space requirement length: 1,550 mm, space requirement height: 1,740 mm, power: 1.13 kW (1.54 HP), Hydraulic cylinder / Emulsion pump / Eccentric clamp / Base frame / Saw band / 400V plug -16A- Cutting speed: 35 + 70 m/min. Dledpfx Ajxxi N Asddsa

Year of construction: 2015, operating hours: 13,660 h, condition: used, filter area: 18 m², negative pressure: 2,000 Pa, suction capacity: 13,000 m³/h, Oil mist extraction unit for workshop halls – Plug & Play filtration tower designed for extraction of coolant and lubricant emissions in industrial halls. Dodpfx Adjxnlwzsdola IVAT Ölnebel-T13K filtration and ventilation tower. Ideal for aerosols, oil mist, emulsion mist, and vapor extraction. Industrial hall filtration ventilation – suitable for numerous technological processes in manufacturing plants, particularly in metalworking operations. Very often, extraction systems with coolant recovery installed directly on machines are insufficiently effective or simply not present. Machine retooling, frequent opening of machine enclosures, or lack of enclosure at machining heads causes oil mist to escape from machine areas, exposing workspaces and personnel to harmful mist and vapors. Installing a filtration tower significantly improves air quality at workstations and should be considered an ideal filtration and ventilation supplement for halls where fully isolating oil mist using coolant recovery devices is either impossible or very difficult to achieve. Equipped with automatic air and temperature control for the workspace. An innovative PLC control system monitors data and detects threshold exceedances at the workplace, ceiling heat-up, and automatically regulates temperature and air quality. Performance: up to 13,000 m³/h Vacuum: 2000 Pa Filtration area: 18 m² Fan power: 7.5 kW Year of manufacture: 12/2015 Operating hours: 13,660 Stock number: 1054

Condition: used, Technical details: pipe system - processing diameter: 200 mm pipe system - inlet: 200 mm Dledpfeu Nv Arsx Addea volume flow ventilator - shred: 1200 m³/h electrics - voltage/frequency: 400/50 V/Hz filter cartridge type: Stahlwolle filter surface area: 450 x 450 mm total power requirement: 570 W weight of the machine approx.: 55 kg dimension machine xH: 0,55 x 0,9 x 0,83 m Dust mist suction and filter - Oil mist extraction system -suction Ø 300 x 90mm right side -exhaust air 430 x 300mm ceiling side -2x condensate drain 1 1/4" (blind plug) The Ultra Cleaner type UC 1 is suitable for direct extraction from machining centers using emulsion, with a machining chamber volume between 1 m³ and 4 m³. *

Condition: used, mileage: 17,255 km, power: 335 kW (455.47 HP), first registration: 10/2024, overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, gearing type: automatic, emission class: euro6, Year of construction: 2024, total width: 2,550 mm, total height: 3,850 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Internal Number: #365 MB ACTROS 2546 6x2/ Kroll ADR Suction Vehicle, K 1.0 - 13.5 / 36 PESP Body KROLL * Tank material S355J2+N (St. 52.3) * ADR suction/pressure tank vehicle K 1.0-13.5/36 PESP * 14,500 liter tank capacity (air volume) * 10,000 liter sludge volume | 3,500 liter emulsion chamber * 1,000 liter rinse water volume (non-pressurized) * Discharge with sliding piston Chassis MB ACTROS 2546 6x2 * Automated transmission * 460 HP / 338 kW * 2,200 Nm * EURO 6 * Fuel capacity approx. 500 l * Driver’s cab color MB 9147 Arctic White * 2x LED beacon lights on driver’s cab * Reversing camera Djdpfxsxa T Rys Addjla * Navigation system * Air conditioning * Coolbox Vacuum system CVS VacuStar W1300, approx. 1,200 m³/h at 400 mBar * Suction hose cassette with telescopic boom and 20m DN100 High-pressure system Speck P45/85-160 / approx. 85 l/min at 160 bar * Small hydraulic HP hose reel for 60m DN 13 * Approx. 60m rinse hose DN 13 Special features ADR version L4BH type class FL incl. EX/II, EX/III, and AT * Remote-controlled suction connection pre-piston chamber DN100 * Manhole DN500 on left side * HP lance * Noise protection cladding for the pumps left and right * LED environment lighting * Remote control with two batteries * Tiltable debris container * Reversing camera * Ladder with bracket and anchor points * Advertising board on left and right of tank Technical Data GVW 26,000 KG * Length: 10,700 mm * Height: 3,800 mm * Width: 2,550 mm * Wheelbase: 3,900 mm Optional Equipment: Axle load – measuring device, front axle load 9.0 t, audio system: digital radio DAB / DAB+, Equipment package: ADR, Right exterior mirror with shunting position, 220 Ah battery, brake connections standard and DuoMatic, interactive multimedia cockpit, electrical preparation in cab 24V / 100 A, driver assistance system: high beam assistant and cornering light, suspension: front springs 9.0 t, 3-leaf, front windshield tinted with band filter, hazardous goods version ADR type FL, 12-speed transmission - Type: G 211-12, 3-piece fender, 3-piece fender with splash guard, fuel tank: 510 L aluminum, left, cool box/cooler, 2-cylinder air compressor, reinforced engine brake, steered trailing axle 9 t, liftable, double PTO MB 123-11b/1c, programmable special module, wheelbase variant 4300 mm, frame overhang 1650 mm, rain sensor, acoustic reversing alarm and warning beacon (external warning signal), additional remote control key (2), circuit breaker, seat cover/upholstery: passenger seat velour, seat cover/upholstery: driver’s seat velour, cab seats: both-sided armrests passenger seat, cab seats: comfort suspension passenger seat, cab seats: comfort suspension driver's seat, exterior sun visor, steel rims 11.75x22.5 (on front axle), socket 24V / 25A in passenger footwell, additional socket 24V in passenger footwell, steep shoulder rims 11.75x22.5 (on trailing axle, reinforced), preparation for 4 environment cameras (display on vehicle monitor), preparation for additional headlights, seat belt warning device passenger, seat belt warning devices, transmission oil cooler For further details and/or pictures, please contact us directly. You will find a large selection of other vehicles for BUYING or RENTING at: Subject to change, prior sale, and errors. The buyer is obliged to independently verify the condition and equipment of the goods. Sale is exclusively...

Condition: good (used), Year of construction: 2010, operating hours: 78,572 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, feed rate X-axis: 5,00,000 m/min, feed rate Y-axis: 50,000 m/min, feed rate Z-axis: 50,000 m/min, overall weight: 12,000 kg, Special Equipment of the Machine 1. Extension of the tool magazine from the standard 30 tools to 210 tools, incl. preparation for 240 1. Pallet round storage for 10 pallets, incl. setup station, Number of pallets: 10, Pallet size: D 130 mm, Pallet interface: Capto C6 Max. workpiece size: D 250 x H 250 mm Max. workpiece weight: 40 kg Pallet clamping force: 22.5 kN 1. HSC main spindle 40 – 20,000 rpm with 7.5/11 kW motor, Max. spindle torque: 70 Nm up to 1,500 rpm, Including weekly timer for starting the warm-up cycle and automatic machine shutdown 1. Spindle interface HSK 63A 1. Direct travel measuring system (Heidenhain) on X, Y, and Z axes, supplied with purge air 1. KNOLL coolant system, consisting of: - Scraper belt chip conveyor with lift pump and chip discharge to operator side - Through-spindle coolant supply with KTS25-50T coolant pump, 24 l/min at 70 bar, 5.5 kW Coolant pressure switchable in 3 stages - External cooling with coolant pump, 100 l/min at 1.4 bar - Coolant shower with coolant pump, 100 l/min at 1.4 bar - Compact filter KF200, filter capacity 200 l/min Overall unit dimensions (L x W x H): approx. 1.8 x 1.1 x 1.0 m Tank volume: approx. 1,400 liters 1. Cooling water recooler VWK 90 – D emulsion Cooling capacity: 11.5 kW Ambient temperature up to 42°C Refrigerant: R407c 1. Coolant spray gun in the working area including pump and electrical installation 2. Spiral chip conveyors 1. TEBARON mechanical air filter TEB/BV2 for extraction of emulsion, oil mist, and smoke, consisting of: - 3-stage prefilter pack - HEPA filter according to DIN EN 603335-2-69 with BIA test certificate, separation efficiency > 99.995% for particles ≥ 0.3μ. - Fulfills requirements for application categories K1/K2 (carcinogenic substances and pathogens) as well as dust class H. 1. Single support with base plate for ISI air filter TEB/BV2 1. RENISHAW OMP 60 probe for automatic zero point setting and workpiece measurement, can be changed into the spindle via tool changer: Dedpfx Asxwm Adsddola Including EASY PROBE SOFTWARE Pressure sensor for tool length measurement and tool breakage monitoring Special accessories for the control system 1. Increase in workpiece coordinate systems from 6 to 54 1. Coordinate system rotation G68/G69 1. Chamfering and rounding corners 1. Automatic zero point tracking 1. Contour re-approach 1. Extension of macro variables from standard 100–149, 500–549 to 100–199, 500–999 1. IZ2/150NF HSC precision control for simultaneous 5-axis machining, consisting of: - Fast Data Server function - High-Speed Precision Contour Control - Nano Smoothing - Dynamic zero point tracking (up to 8 different zero points available, G54.2) - TCPC (Tool Center Point Control) for 5-axis simultaneous milling (G43.4/G49) - Swivel cycle enables machining on an inclined working plane (G68.2/G53.1/G69)

Condition: excellent (used), Year of construction: 2015, Tipper Tie TTChop 20 Cutter Based on more than 130 years of experience in design and a keen sense of innovation, the TTChop cutter generation TIPPER TIE sets new standards in grinding technology. TTChop20 combines functionality and advanced technology. This is an extremely versatile and yet specialized machine for each individual application. The production of raw coarse or fine sausages, tender boiled sausages or emulsions brings the same remarkable results as gentle mixing and dipping of a wide variety of components. Comes with a lot of extra knifesets. Dodpfx Adjv Eamcsdela Manufacturer: Tipper Tie Model: TTChop 20 Year: 2015 Production Hours: 9.338 hours Capacity: 200 liter Max. load elevator: 250 kg. Power: 400V / 50Hz / 98kW Machine Dimensions LxWxH: 3.250x2.600x2.200 mm Machine Weight: 4.100 kg.

Condition: like new (used), Year of construction: 2024, Technical specifications: Filtration flow rate: approximately 90 l/min Fluid compatibility: neat, mineral, or synthetic oil; aqueous fluid (emulsion or synthetic) Pollutants: Carbide, Cermet, PCD, HSS, Precious Metals, Cast Iron, Ferrous and Copper Alloys, Aluminum, Ceramic, Plastic Filtration threshold: 5-10 μm nominal depending on the cartridges used Dimensions: 1,000 x 1,090 x 1,545 h Advantages: Reduced surface area Plug & Play solution Dlsdpfx Aswahrhoddsa Easy access for maintenance No compressed air required Filtration and temperature stabilization on 1 m² of surface area Suitable for all machines requiring no more than 100 l/min of coolant

Condition: new, Extraction capacity of filter unit at spigot*: 2050 m³/h Total power consumption*: 1.04 kW Operating voltage: 400 V, 50/60 Hz,3Ph+PE Noise level*: 69 db(A) Dimensions L/W/H in mm: L 1290 / W 588 /H 595 Colour: RAL 7035 Weight: 113 kg Dledpfxsh Rfbxs Addea Manufacturer: ISI Industrieprodukte GmbH *Depending on filter equipment Special voltage or special colour on request Application: Separation of emulsion mist, for medium to very large machine workrooms. Your advantages of the COBARON series: - 15 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Adjustable speed and air flow rate - Available with a wide range of filters - High-quality filter media in the pre-filter and main filter area - Separation rates of up to 99.95 - Large range of mounting and connection accessories - Flexibly adaptable to the application - Optimum service life - Quality Made in Germany With COBARON, we offer a filter system that meets today's diverse processing possibilities and the resulting pollutant profiles. In the standard programme alone, the COBARON combination filter system offers various filter equipment variants and can thus be variably configured for many applications. The various configuration levels of the COBARON series were specially developed for applications that were borderline cases for many filter systems (mechanical or electrostatic). The combination of both proven filter principles in the appropriate application increases the effectiveness of the air filter and extends the service life. COBARON can be operated as a purely mechanical filter unit with different filter stages - or additionally configured with an electrostatic filter cell. Our filter units are already digitalised as standard and can be controlled with a laptop, for example.

Condition: used, This listing is for a IKA Eurostar PWR CV Overhead Stirrer. The unit is in full working condition and is ready for immediate release. The IKA Eurostar PWR CV Overhead Stirrer is an efficient laboratory device specifically designed for various stirring tasks, excelling in mixing both high and low viscosity substances. This stirrer is part of the comprehensive IKA Eurostar series, which offers diverse models tailored to different laboratory needs. Key Features: Speed Range: Features a versatile speed range of rpm, with automatic adjustments made possible through advanced microprocessor-controlled technology. Safety Circuits: Equipped with built-in safety circuits that provide automatic cut-off in cases of anti-stall or overload conditions, ensuring user safety and equipment protection. Constant Speed: Maintains a steady speed regardless of viscosity changes in the sample, as it continuously compares the actual shaft speed with the set speed for optimal performance. Stirring Quantity: The EuroStar 20 model can handle a maximum stirring quantity of 15 litres (H2O), making it suitable for larger volumes. Torque: Delivers a maximum torque of 20 Ncm at the stirring shaft, providing sufficient power for effective mixing. Stirring Element Fastening: The stirring element is securely fastened using a chuck, ensuring stability during operation. Applications: Laboratory Use: Designed specifically for laboratory environments, making it ideal for routine stirring tasks. Mixing Substances: Capable of efficiently mixing a wide range of substances, whether they are of high or low viscosity, catering to diverse experimental needs. Intensive Mixing: Suitable for applications that demand intensive mixing, such as preparing emulsions or suspensions. Dodpfxexxz S Ae Addsla

Condition: used, The APV Gaulin homogenizer MC 25-3,5TPS is a high-pressure homogenizer commonly used in various industries, including food, pharmaceutical, and chemical manufacturing. Here are some key features and details about this model: - High Efficiency: The MC 25 series is designed for efficient homogenization, allowing for the production of stable emulsions and fine dispersions. - Adjustable Pressure: It typically allows for pressure adjustments, enabling customization of the homogenization process based on the nature of the product being processed. - Versatile Applications: This homogenizer can be used for various applications, including dairy processing, beverage production, cosmetic formulations, and more. - Robust Construction: Built for durability, it often comes with stainless steel components that are resistant to corrosion and wear, making it suitable for demanding environments. - Ease of Use: These homogenizers usually feature user-friendly controls for ease of operation and maintenance. - Maintenance: Regular maintenance is essential to ensure optimal performance and longevity. This may include checking seals, cleaning components, and monitoring wear parts. Capacity: 8,000 L/h Dljdpfx Adoxx Sbuedea Pressure: 240 Bar Stages: 2 Motor KW: 65 Weight: 2,625 kg Condition: Good

Condition: good (used), Year of construction: 2013, operating hours: 44,500 h, EMAG VL5i vertical turning machine (2013) Manufacturer: EMAG Type: VL5i Year of manufacture: 2013 Operating hours: 44.500 Condition: good, used, in production Control SIEMENS 840 D SL Emulsion mist extraction chip conveyor Dedexnnigjpfx Addola Further information will follow

Condition: good (used), Year of construction: 2002, total length: 2,000 mm, total width: 1,200 mm, total height: 1,200 mm, overall weight: 750 kg, input voltage: 400 V, power: 705 kW (958.53 HP), CFS Ecocut 175 H Emulsifier The GEA EcoCut 175 is a compact yet robust emulsifier designed for small to medium-sized productions. It can be used to prepare raw materials such as pork skin emulsion as well as for final emulsions. With the choice of either a single- or double knife set, it can produce coarse as well as superfine emulsions. Produces fine and coarse emulsions Produces pork skin emulsions Excellent emulsion quality in batch production Single- and double-knife Dlsdpfxjqpd Aqs Addoa Pump or hopper fed Brand: CFS Model: Ecocut 175 H Year: 2002 Capacity: 4.000-6.000 kg/h (depends on product and knife set used) Hopper Capacity: 150 L Feeding Method: Hopper or pump Cutting Head Diameter: 175 mm Knife Speed: 2.950 RPM Power: 3PH / 400V / 50Hz / 70,5kW Machine Dimensions (LxWxH): 2.000x1.200x1.200 mm Machine Weight: 750 kg.

Condition: used, Year of construction: 2007, DOUBLE PACK – 2 DMG CTX 510 lathes Year of manufacture: 2007 + 2008 Dodpfx Adexuuwkjdela Three-jaw chuck with tailstock and steady rest support Emulsion machine, currently not in use Installed large steady rest can be purchased as an option 1 machine equipped with driven tools – without axis Ex works Can be inspected under power – currently not in serial production, only used for sample parts

Condition: new, Year of construction: 2023, Extraction capacity of filter unit at spigot*: 2600 m³/h (free-eye) Total power consumption*: 0.62 kW Operating voltage: 400 V, 50/60 Hz,3Ph+PE Noise level*: 65 db(A) Dimensions L/W/H in mm: L 975 / W 508 /H 545 Colour: RAL 7035 Weight: 90 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter equipment Special voltage or special colour on request Application: Extraction of oil mist, emulsion mist (for emulsions with higher oil contents) and smoke, for small to very large machine workrooms | Oil mist separator. Dedpfx Adoh Rdxnjdsla Your advantages of the ELBARON series: - 18 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Speed and air flow rate adjustable - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large range of mounting and connection accessories - Quality Made in Germany We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke (oil mist separator). For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already digitalised as Option and can be controlled, for example, with a laptop. The ELBARON® unit series comprises 18 unit variants and can be optimally designed for your application in terms of size and performance. ELBARON® units impress with their long service life and absolute functional reliability. Our electrostatic filter cells are dimensioned in such a way that the best possible filter efficiencies, service lives and trouble-free operation are achieved under economic aspects.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 49,479 h, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Z-axis: 200 mm, spindle speed (max.): 7,500 rpm, turning diameter: 210 mm, turning length: 100 mm, TECHNICAL DETAILS Max. turning diameter: 210 mm Max. turning length: 100 mm Max. swing diameter over bed cover: 210 mm Travel X-axis: 400 mm Travel Z-axis: 200 mm Max. workpiece length: 100 mm Max. workpiece diameter: 27 workpieces with 30–85 mm or 18 workpieces with 30–130 mm Max. main spindle speed: 7,500 rpm Main spindle power at duty cycle 10–40/100% max.: 25/16 kW Main spindle torque at duty cycle 10–40/100% max.: 200 Nm Main spindle front bearing diameter: 80 mm Main spindle flange size: Size 5 (DIN 55026) Axes at main spindle unit: X/Z Turret: bottom Number of stations/driven stations: 12/12 Tool mounting in turret: VDI 40 Rapid traverse speed X-axis: 60 m/min Rapid traverse speed Y-axis: 30 m/min Feed force in X/Z main spindle unit: 5,000 N Direct linear measuring system main spindle unit: X/Z MACHINE DETAILS Control: Fanuc 18i TB Electrical Data Operating voltage: 400/50 V/Hz Main fuse: 80 A Total connected load: 36 kVA Dimensions & Weight Machine dimensions (LxWxH): approx. 2,500 x 1,900 x 2,300 mm Overall system footprint (LxWxH): approx. 3,600 x 1,900 x 2,300 mm Machine weight: approx. 6,000 kg Operating hours: approx. 49,479 h EQUIPMENT Full-stroke cylinder on main spindle Splash guard enclosure with fully encapsulated working area Work area lighting Dljdpjxu Ekbefx Addja Oil/emulsion mist extraction system Hinged belt chip conveyor (discharge height: 1250 mm) Coolant system Circulating parts storage conveyor Automatic central lubrication

Condition: used, volume flow: 7,500 m³/h, Oil mist extractor for CNC machines, Donaldson Torit brand filter separator. The unit is designed for filtration of oil mist (emulsions as well as pure oil), vapors and fumes generated by various metal cutting processes. Filtration efficiency reaches 99.97% Model: DMC-D2 Fan power: 7.5 kW Capacity: 7,500 m3/h Dedpfx Adexd Ry Hjdela Filtration area: 40.8 m2 Filter cartridges in very good condition. Stock no.: 1043