Used Emulsion for sale (272)

Condition: excellent (used), Year of construction: 2015, Tipper Tie TTChop 20 Cutter Based on more than 130 years of experience in design and a keen sense of innovation, the TTChop cutter generation TIPPER TIE sets new standards in grinding technology. TTChop20 combines functionality and advanced technology. This is an extremely versatile and yet specialized machine for each individual application. The production of raw coarse or fine sausages, tender boiled sausages or emulsions brings the same remarkable results as gentle mixing and dipping of a wide variety of components. Comes with a lot of extra knifesets. Manufacturer: Tipper Tie Model: TTChop 20 Year: 2015 Production Hours: 9.338 hours Capacity: 200 liter Lredpfxov Eamco Adwsg Max. load elevator: 250 kg. Power: 400V / 50Hz / 98kW Machine Dimensions LxWxH: 3.250x2.600x2.200 mm Machine Weight: 4.100 kg.

Condition: like new (used), Year of construction: 2024, Technical specifications: Filtration flow rate: approximately 90 l/min Fluid compatibility: neat, mineral, or synthetic oil; aqueous fluid (emulsion or synthetic) Pollutants: Carbide, Cermet, PCD, HSS, Precious Metals, Cast Iron, Ferrous and Copper Alloys, Aluminum, Ceramic, Plastic Filtration threshold: 5-10 μm nominal depending on the cartridges used Dimensions: 1,000 x 1,090 x 1,545 h Advantages: Reduced surface area Plug & Play solution Easy access for maintenance No compressed air required Lodpewahrhefx Adwerg Filtration and temperature stabilization on 1 m² of surface area Suitable for all machines requiring no more than 100 l/min of coolant

Condition: ready for operation (used), Belt Filter, Pressure Filter, Emulsion Filter, Sludge Filter, Lubricant Filter, Emulsion Filter, Used Machine Manufacturer: Faudi Dimensions: 2460 x 1660 x 1270 mm Lrsdpfxsv D Hmaj Adwsg Belt size: 2200 x 1270 mm Active filtering surface: 1400 x 1200 mm Capacity : 1200 l/m The Klappbandfilter is used for cleaning contaminated cooling and lubricating fluids in the metalworking field, as well as for processing various sludge waste during rough machining, especially aluminum, or for handling abrasive grinding sludge. When the cooling and lubricating fluids and grinding sludge are cleaned, they can be reused in the process for longer periods, significantly contributing to environmental protection. Additional benefits include heat dissipation at the machining site and optimization of the workpieces' surface quality. The Klappbandfilter is versatile and can also be used independently. Its modular design allows it to be optimally adapted to various conditions. The FAUDI design allows for the buildup and removal of filter cakes up to 15 cm thick. With the extra-high filter cake, the separation performance of the filter is further increased. Filter areas of 1, 1.5, and 2.5 m² per filter are possible. Filter fineness: Up to 10 µm Medium/Fluids: Oils and machining emulsions Filter auxiliaries: Optionally with or without filter auxiliaries

Condition: excellent (used), 5-Axis Machining Center with swivel milling head, pallet station, tool calibration, thermal compensation, work area extraction system, and much more. Year of manufacture: 2016 Spindle hours approx. 1,500 h (after spindle replacement at the beginning of 2025) Control System: - Heidenhain iTNC 530 HSCI - Heidenhain DCM Collision Monitoring - Heidenhain HR 410 electronic handwheel - Swiveling console with 19" monitor - Teleservice via LAN/WLAN Travel Range: - Travel X 1,000 mm, Y 1,100 mm, Z 810 mm - NC rotary table D 1,000 x 800 mm, swing diameter 1,350 mm Milling Head: - Automatic horizontal/vertical swivel milling head - Fully-fledged stepless NC axis from -1° to +90° - Blowing air through the spindle - External coolant supply via nozzle ring Drive power: 38 kW (100% duty cycle) Speed: 16,000 rpm Torque: 135 Nm at 40% duty cycle Spindle interface: HSK 63-A Media Supply: - Internal coolant feed: 50 bar - capacity 28 l/min - Paper belt filter with additional fine filter - Individual tool pressure regulation during program operation Tool Changer: - Rack magazine with 73 stations (expandable with additional racks) - Swiveling dialog operation panel - Drawer for loading and unloading tools from tool racks Tool Measurement: - 3D wireless touch probe m&h 20.00-Multi, software adapted for HSK 63-A - Including Kinematics-Opt, compatible with iTNC control, and calibration sphere on magnetic stand Pallet Changer: - Double palletizing unit, pallet diameter 1,000 x 800 mm, hole grid 100mm x 100mm, hardened drill bushes D 16mm - Rotary table unit including zero-point clamping system, loading station accessible by crane - Pallet changer unit protected with enclosure Special Equipment: - Micro-Epsilon sensor - For detection and dynamic compensation of thermal spindle growth Chip Conveyor: - Scraper belt conveyor along machine bed - Chip ejection height 1,100 mm Machine Enclosure: - Full-area protective enclosure with large angle door for crane loading and a quick-access door - Easy removal of swarf from the workspace Extraction System: - Oil and emulsion mist extraction, mechanical air filter, extraction capacity 1,800 m³/h Rotating View Window: - Viewing window integrated into the cabin door for workspace observation Lrjdpfxexhg Die Adweg Camera in Work Area: - Monitor and keyboard at the operator console—allows monitoring of rear-side machining operations Machine Data: - Space requirement (without service area): approx. LxWxH 4,791 mm x 4,100 mm x 4,791 mm (including extraction system) - Machine weight approx. 19,700 kg - Total weight with all equipment plus maximum workpiece load, full tool magazine, and all operating materials: approx. 27,730 kg - Connected load: 50 kVA, 400V, 50/60 Hz This machining center, featuring an exceptionally good and practical configuration, is in very good condition. It operates with the renowned "Swiss precision." There is no service or repair backlog—in fact, the opposite. With an almost new milling spindle, the REIDEN RX 10 5X is well positioned for long-term use. Technical modifications and errors excepted.

Condition: excellent (used), Becomix Universal Homogenising Mixer Model RW3000, Capacity 3000 lts, Complete with piping and control panel. Universal mixer for various cosmetic and pharmaceutical products Application: Low to very high viscosities - For example, creams, ointments, emulsions, toothpastes, gel products, mascara, make-up. Properties: Homogeniser with internal and external circulation, Anchor agitator with scrapers for horizontal and vertical mixing Lredpfx Adjx Dnilsweg Short heating and cooling times, Hygienic and dead space-free construction, CIP/SIP, ATEX zone 2 to 0 possible, cGMP

Condition: new, functionality: fully functional, Year of construction: 2025, Pothole Repair Complex MIRA-3 Pothole Repair Complex MIRA-3 by TICAB TM is a unique road repair system developed by TICAB engineers for optimization of road patching works. MIRA-3 complex includes infrared asphalt heater, asphalt recycler and bitumen emulsion sprayer. How to use MIRA-3 Complex: Lrjdpfx Adet Itzzswog - Heating of the repair place. - Add a hot asphalt from the asphalt recycler. - Spraying the bitumen emulsion. MIRA-3 includes: - Infrared Asphalt Heater MIRA-3. - Bitumen Emulsion Sprayer BS-100. - Asphalt Recycler RA-500.

Condition: new, functionality: fully functional, Year of construction: 2025, Asphalt Hot Box НВ-2 With Asphalt Hot Box HB-2 by TICAB TM you can deliver hot asphalt from the asphalt plant to the place of road works, with minimal heating loss. Lrodpfx Adot It Dvswog Thermal insulation of the container with quality mineral wool allows to keep the working temperature of the asphalt up to 12 hours without additional heating. At the same time, the HB-2 is additionally equipped with a Beckett diesel heating system and a Thermal Controller. HB-2 is equipped with a hydraulic lifting system. There is a manhole on the top of the tank for loading the hot asphalt. Asphalt Hot Box HB-2 by TICAB TM is easily mounted on the truck body or on a trailer. SPECIFICATIONS: - Capacity - 1,8 m3 TICAB Manufacturer of road machines: bitumen emulsion sprayers, crack sealing mahines, asphalt recyclers, street vacuum cleaners, universal loaders and other road machines. The highest European quality, competitive prices. If we do not have an official representative office in your country, we are looking for a distributor there! We are looking forward to contact with you!

Condition: new, Year of construction: 2025, Autonomous spreader of sand-salt mixture RPS-1500 from ТМ TlSAV - is a powerful equipment for high-quality spreading of roads and pavements with de-icing materials, which allows to minimize the use of manual labour and reduce the accident and risk of injury to people. The spreader is equipped with a 1.5 m³ hopper with a scraper-chain feeding mechanism and a disc for spreading materials. Thanks to its autonomy and compact dimensions it can be used with any vehicle. CHARACTERISTICS -Spreading width, depending on disc speed - 3-6 m. - Hydraulic drive mechanisms. -Adjustment of the disc inclination (manual). -Mix feeding mechanism - scraper-chain. -System of proportional control of disc rotation speed on the control unit in the driver's cab - (optional). - Control of the equipment by remote control from the driver's cab. - It has its own wheelbase or can be mounted on the customer's vehicle. TICAB is a manufacturer of road machines: bitumen emulsion sprayers, joint and crack fillers, asphalt recyclers, street hoovers, universal loaders and other road machinery. High European quality, competitive prices. If we do not have an official representative office in your country, we are looking for a distributor! We will be glad to contact you! Lredpfx Aevpp S Nodwog Sand spreader with capacity of 6 cubic metres (9 tonnes of mixture) for treatment of carriageway with anti-icing materials (sand, salt, sand-salt mixture) in winter period and transportation of asphalt concrete mixture in summer period. Sand spreaders are installed in the lorry body with the help of a crane. -Dimensions: L-4.5 m; W-2.10 m; H-1.85 m - Travelling speed - up to 30 km/h. - Strip treatment width up to 10 m, spreading density - up to 350 g /m. - Adjustment of width and density of spreading - on the body of the spreader. -Feed distributor is disc-shaped (stainless steel), equipped with a protective cover, height adjustable, equipped with a hydraulic motor. - Power take-off of the hydraulic system - from the standard power take-off box of the vehicle. -Scraper-chain sand (salt) feeding is equipped with a hydraulic motor, with protection against ingress of small foreign objects. - Adjustment of scattering ‘right-left-proportional’. - Control (ON/OFF) from the driver's cab.

Condition: new, Year of construction: 2025, BITUMEN EMULSION SPRAYER ABS-8000 Bitumen Emulsion Sprayer ABS 8000 – is the optimal equipment for performing large volumes of work in the shortest possible time. Autonomous diesel engine makes it possible to install the equipment on any truck. Theelements of control are located on a separate panel in the driver’s cab with partial redundancy in the control cabinet, which facilitates the adjustment of equipment and the transition of its working bodies from the transport to the working position. High quality bitumen pump and shut-off valves ensure trouble-free operation of the equipment. SPECIFICATIONS Density of surface coating – from 100 g / m2 to 1600 g / m2 Spraying width – from 2 m to 3.7 m Cleaning system. Tank capacity 8000 l. Function of tank self-pumping. Spraying barblowing by compressor. Rear view camera with monitor in driver’s cab. Bitumen emulsion spraying dosing control (g/m2) via touch screen display in driver’s cab. The system for heating the bitumen emulsion with a diesel burner (Italy). Spraying rod control equipment (lowering and expanding) by means of a remote control in the driver’s cab and on the vehicle body. REQUEST A CALL Buy BITUMEN EMULSION SPRAYERS TM TICAB – the best decision for you! Our price is competitive today and tomorrow. Specifications: Density of surface coating – from 100 g/m2 to 1600 g/m2; Spraying width – from 2 m to 3.7 m; Cleaning system; Tank capacity 8000 l; Function of tank self-pumping; Lsdpfsvpt Dcox Adworg Spraying bar blowing by compressor; Rear view camera with monitor in driver's cab; Bitumen emulsion spraying dosing control (g/m2) via touch screen display in driver's cab; The system for heating the bitumen emulsion with a diesel burner (Italy); Spraying rod control equipment (lowering and expanding) using a remote control inside the driver's cab and on the sprayer body.

Condition: new, functionality: fully functional, Year of construction: 2025, BPM-120 CRACK SEALING MACHINE TICAB LLC (Trade Industrial Company AB) — a leading manufacturer of road maintenance equipment in Europe — offers you a cost-effective solution for efficient local repair of asphalt concrete surfaces: the BPM-120 crack and joint sealing machine. Main Application: The BPM-120 fills cracks and joints on asphalt roads, parking lots, sidewalks, airfields, and other road infrastructure facilities. Designed for small- and medium-scale projects! BPM-120 Technical Specifications: • Bitumen emulsion tank: 120 liters • Bitumen pump: capacity up to 10 l/min, working pressure up to 5 bar • Feed system: manual spray wand + 2 m hose (non-heated) • Mixing: manual • Bitumen heating system: diesel burner • Temperature control: automatic (maintains preset temperature) • Purge system: allows cleaning of hose and spray wand after work is completed Thoughtful design for your comfort and safety! Advantages of the BPM-120 model: • Compact size and mobility • Easy to maintain and operate • Direct heating with diesel fuel (no oil layer) • Energy-efficient fuel consumption • High-quality crack and joint sealing ensures pavement durability • Simple construction guarantees reliability in operation Price: • €13,000 without trailer • €15,200 with trailer Delivery Terms: • Production time: up to 20 business days after order confirmation • Warranty: 12 months • Delivery: from the manufacturer’s warehouse • Support: manual, technical assistance, video instructions Lsdpjvrialofx Adwjrg Contact us today for a personalized consultation! Choose equipment that delivers results — send your inquiry now!

Condition: new, Year of construction: 2025, Bitumen Sprayer+Crack Sealer 2in1/ BM Combo (Without trailer) Melt and apply asphalt crack filler machine Combo has a wide range of applications. BCM-120 is professional equipment that has proven itself in the road construction industry, maintenance or repair of road surfaces. Trailed asphalt distributor ensures accurate and efficient spreading of bitumen emulsion. An upgraded bitumen machine BM-Combo runs on diesel engine with hydraulic pump drive and heats emulsion from diesel burner. The bitumen emulsion sprayer is equipped with a separate tank. Another one is installed to be filled with mastic. Materials are mixed manually. A crack sealer has an automatic control of mastic heating and the purging system. GENERAL 1. Diesel engine – 14-18 hp 2. Compressor receiver – 25L 3. Pumps drive – hydraulic CRACK SEALER 1. Bitumen tank – 120L 2. Bitumen pump – up to 10L/min, 5 bar 3. Hand spraying rod + hose 2m (not heated) 4. Manual mixing 5. Bitumen heating – diesel/gas burner 6. Heating control – automatic 7. Blowing system BITUMEN EMULSION SPRAYER 1. Emulsion tank – 1000L 2. Pump – 36L/min, 2 bar 3. Emulsion heating – diesel/gas burner 4. Hand spraying rod + hose 4m 5. Spraying bar 7 nozzles 6. Pipe line cleaning system and spray bar blowing Lsdpsvptd Nefx Adwjrg Advantages -You get a bitumen emulsion sprayer and a crack sealer in one machine. -An economical diesel engine comes as standard. -You can heat the mixture from gas or electricity. -We offer the price from the manufacture and unsurpassed service.

Condition: new, Extraction capacity of filter unit at spigot*: 2050 m³/h Total power consumption*: 1.04 kW Operating voltage: 400 V, 50/60 Hz,3Ph+PE Noise level*: 69 db(A) Dimensions L/W/H in mm: L 1290 / W 588 /H 595 Colour: RAL 7035 Weight: 113 kg Manufacturer: ISI Industrieprodukte GmbH Lrodpfx Ash Rfbxodwjg *Depending on filter equipment Special voltage or special colour on request Application: Separation of emulsion mist, for medium to very large machine workrooms. Your advantages of the COBARON series: - 15 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Adjustable speed and air flow rate - Available with a wide range of filters - High-quality filter media in the pre-filter and main filter area - Separation rates of up to 99.95 - Large range of mounting and connection accessories - Flexibly adaptable to the application - Optimum service life - Quality Made in Germany With COBARON, we offer a filter system that meets today's diverse processing possibilities and the resulting pollutant profiles. In the standard programme alone, the COBARON combination filter system offers various filter equipment variants and can thus be variably configured for many applications. The various configuration levels of the COBARON series were specially developed for applications that were borderline cases for many filter systems (mechanical or electrostatic). The combination of both proven filter principles in the appropriate application increases the effectiveness of the air filter and extends the service life. COBARON can be operated as a purely mechanical filter unit with different filter stages - or additionally configured with an electrostatic filter cell. Our filter units are already digitalised as standard and can be controlled with a laptop, for example.

Condition: new, Year of construction: 2023, Extraction capacity of filter unit at spigot*: 2600 m³/h (free-eye) Total power consumption*: 0.62 kW Operating voltage: 400 V, 50/60 Hz,3Ph+PE Noise level*: 65 db(A) Dimensions L/W/H in mm: L 975 / W 508 /H 545 Colour: RAL 7035 Weight: 90 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter equipment Special voltage or special colour on request Application: Extraction of oil mist, emulsion mist (for emulsions with higher oil contents) and smoke, for small to very large machine workrooms | Oil mist separator. Your advantages of the ELBARON series: - 18 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Speed and air flow rate adjustable - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large range of mounting and connection accessories - Quality Made in Germany Ljdoh Rdxnepfx Adwsrg We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke (oil mist separator). For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already digitalised as Option and can be controlled, for example, with a laptop. The ELBARON® unit series comprises 18 unit variants and can be optimally designed for your application in terms of size and performance. ELBARON® units impress with their long service life and absolute functional reliability. Our electrostatic filter cells are dimensioned in such a way that the best possible filter efficiencies, service lives and trouble-free operation are achieved under economic aspects.

Condition: like new (used), Year of construction: 2008, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45 m/min, rapid traverse Y-axis: 45 m/min, rapid traverse Z-axis: 45 m/min, controller model: Heidenhain iTNC530, table width: 960 mm, table length: 600 mm, overall weight: 9,000 kg, spindle speed (max.): 40,000 rpm, operating hours of spindle: 22,800 h, spindle nose: HSK E 40, number of spindles: 1, number of slots in tool magazine: 38, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, This machine has been used exclusively for copper processing. The coolant water supply is present but has not been used to date. In other words, a superb machine that has always done very light machining, has never seen coolant, and is equipped with a Weiss spindle running at 40,000 rpm. The machine comes as standard including: - Original documentation for the machine and the Weiss spindle - BLUM tool laser - Heidenhain TS-440 3D probe - Spindle and emulsion cooler - Lockable roof (harmonica style) Lrodoxgukbspfx Adwjg The machine can be inspected under power by appointment.

Condition: used, Year of construction: 2006, Used Syrup Room up to 6000 L/h Lrodevgvxdepfx Adwog Components of the Syrup room: 1. Electrical control cabinet. 2. Sugar receive tank 200 l 3. Sugar dissolving tank 8000l 4. Sugar filtration 5. Sugar syrup pump 6. Heat exchanger (syrup cooling) 7. Sugar syrup tank I 6000 l 8. Sugar syrup tank II 6000 l 9. Tank for emulsions, concentrates, aroma adding 200l 10. FISCHER pasteurizer for syrup and juices 6000 l/h 11. All pumps, pipes Introduction to the Used Syrup Room up to 6000 L/h Initially, the “Used Syrup Room up to 6000 L/h” emerges as a pivotal asset in liquid processing. Since its inception in 2006, this powerful machinery has led the forefront of syrup production. Boasting a notable capacity of 6000 liters per hour, it serves as an epitome of high-efficiency operation. Currently, it rests in storage, eagerly awaiting integration into its next productive chapter. Core Machinery Components Central to the syrup room’s functionality, the electrical control cabinet stands out. This crucial unit guarantees precise automation of the entire syrup-making process. Subsequently, the journey begins with a 200-liter sugar receive tank. Following closely, an 8000-liter sugar dissolving tank plays an indispensable role, ensuring each batch meets the highest quality standards. Filtration and Cooling Moreover, sugar filtration acts as a critical juncture, aiming to eradicate impurities and guarantee a pristine syrup output. Concurrently, a dedicated pump aids in the efficient transfer of syrup between stages. Furthermore, a sophisticated heat exchanger steps in, crucial for maintaining the syrup at ideal processing temperatures. Storage and Flavoring Additionally, the setup includes two voluminous 6000-liter tanks for syrup storage, designed with both capacity and easy access in mind. Also, a versatile 200-liter tank accommodates emulsions, concentrates, and flavor additions, providing essential flexibility in production. Notably, the FISCHER pasteurizer, with its 6000 L/h capacity, plays a pivotal role in ensuring both syrup and juice safety, solidifying product quality before the final bottling stage. Integrated System Readiness Moreover, the inclusion of all necessary pumps, pipes, and valves—as showcased in the accompanying visuals—underscores the system’s operational readiness. This comprehensive assembly ensures a seamless transition to active production, fostering a smooth and efficient workflow throughout the syrup preparation process. Conclusion of the Used Syrup Room up to 6000 L/h In summary, the “Used Syrup Room up to 6000 L/h” represents a holistic approach to syrup production. Featuring advanced technological components, it underscores a commitment to efficiency and product quality. Therefore, its adoption into a manufacturing environment promises to significantly elevate operational capabilities, positioning it as a valuable investment for any forward-thinking beverage production enterprise.

Condition: used, Used UHT Milk Preparation Room Tetra Pak 6600 L/h Technical Overview of the System The Used UHT Milk Preparation Room Tetra Pak 6600 L/h provides a complete solution for the aseptic preparation of UHT milk, drinking yoghurt, juices, and flavored beverages. Currently in storage and ready for reinstallation, the system delivers high thermal and microbiological efficiency. Moreover, its modular design allows it to operate at 2640 L/h, 3850 L/h, and up to 6600 L/h in full configuration. Therefore, it adapts well to varying production demands. Homogenization Section At the core of the Used UHT Milk Preparation Room Tetra Pak 6600 L/h lies a Tetra Pak homogenizer, model Tetra Alex, which ensures effective fat globule size reduction and consistent product texture. As a result, it stabilizes complex emulsions such as flavored milk or drinking yoghurt and prevents phase separation during storage. Importantly, this homogenizer is non-aseptic and operates upstream of the UHT sterilization process, which eliminates any microbial load introduced during homogenization. Furthermore, the homogenizer supports high working pressures and simplifies maintenance. In addition, the robust construction ensures long-term reliability. Lsdpfewqxhhex Adworg Integrated Deaeration System The system includes a Tetra Pak deaerator (2005) equipped with an auxiliary pump and tank. Specifically, this component removes dissolved oxygen and unwanted gases from the product before thermal processing. Consequently, it improves product stability and reduces oxidation. Additionally, the vertical configuration ensures efficient gas separation. Meanwhile, the design minimizes product loss and guarantees a continuous flow to the next stage. High-Performance Tubular UHT Module Thermal sterilization occurs through a tubular UHT heat exchanger, manufactured by Tetra Pak and model Tetra Therm Aseptic. In particular, this component sterilizes products via indirect heat exchange while preserving organoleptic properties. Importantly, the module includes a holding coil to maintain temperature over a defined time span. Thus, it complies with food safety regulations and ensures microbiological safety. Similarly, its modular design allows for easy integration into existing lines. Electronic Control and Automation The line features an electrical control panel, a Siemens PLC, and operator panels for precise management of each phase. Notably, it includes detailed electrical schematics, Festo pneumatic valves, and Danfoss inverters to dynamically control pumps and heat exchangers. As such, the automation enables continuous processing. Besides, it optimizes the CIP cycles, reduces downtime, and enhances traceability. Above all, it ensures reliable performance across diverse operating conditions. Conclusion In summary, the Used UHT Milk Preparation Room Tetra Pak 6600 L/h offers a complete, high-efficiency system for preparing UHT milk and beverages. Thanks to its top-tier components and scalable design, this line stands as an ideal choice for dairy producers. Whether the goal is reliability, hygiene, or adaptability, this solution meets strict industry standards. Finally, the system remains in storage and is available for immediate installation.

Condition: used, Used Processing Line for small dairy products 2000 L/h Milk Reception and Initial Storage The Used Processing Line for Small Dairy Products 2000 L/h begins with a milk reception unit consisting of two Lactofreeze tanks and a receiving pump. Initially, operators channel raw milk into the tanks, where it remains chilled. As a result, the system ensures thermal stability before processing. Furthermore, this setup minimizes the bacterial load while allowing continuous transfer to the pasteurization stage. Pasteurization and Separation Next, the pasteurization phase uses a plate heat exchanger with a retention section and auxiliary systems, all rated for 2,000 liters per hour. Specifically, the pasteurizer rapidly heats and holds milk at a predefined temperature to eliminate pathogens. Then, the GEA WESTFALIA separator—rated at 3,000 L/h—performs cream separation. Simultaneously, the RANNIE homogenizer (1,000 L/h) reduces fat globules, thus enhancing emulsion stability and preventing cream rise. Fermentation and Coagulation Following thermal treatment, the milk proceeds to fermentation. Here, operators use an insulated double-wall fermentation tank with a 1,000-liter capacity and planetary agitator. Consequently, they maintain uniform bacterial activity and precise temperature control. In parallel, a 1,000-liter coagulation vat equipped with a planetary mixer initiates the curdling process. Both tanks ensure optimal protein structuring for yogurt, cheese, and cultured cream products. Cheese Processing and Draining After coagulation, the Used Processing Line for Small Dairy Products 2000 L/h continues with cheese processing. The system includes a 500-liter vat with a draining sieve and two cheese draining tables. Therefore, operators can efficiently handle large curd volumes. Moreover, these components simplify whey separation while ensuring sanitary compliance. Additionally, their design supports easy cleaning and cross-contamination prevention. Packaging Operations Once products are ready for packing, the line integrates semi-automatic and automatic solutions. First, a semi-automatic filler doses pasteurized milk into 1-liter bags. Subsequently, the yogurt cup filler automatically fills and seals 75 mm and 95 mm cups at up to 1,800 units per hour. Meanwhile, the rotary labeling machine by ETICAP (2004) applies both front and rear self-adhesive labels on cylindrical cups. Importantly, the machine ensures consistent alignment and adhesion. Date Coding, Thermal Control, and Final Packing Ledpsw Ahg Rofx Adwerg In addition, a Videojet 1220 coder (2019) applies expiry dates onto each product via belt conveyor. Further downstream, a vacuum packaging machine handles cream and cheese portions. Thermal utilities include a 115–150 kW solid fuel boiler (2014) with dual transfer pumps. At the same time, an ice water tank (5,000 L, 2014) and a cooling unit (2018) maintain temperature consistency across the line.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 49,479 h, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Z-axis: 200 mm, spindle speed (max.): 7,500 rpm, turning diameter: 210 mm, turning length: 100 mm, TECHNICAL DETAILS Max. turning diameter: 210 mm Max. turning length: 100 mm Max. swing diameter over bed cover: 210 mm Travel X-axis: 400 mm Travel Z-axis: 200 mm Max. workpiece length: 100 mm Max. workpiece diameter: 27 workpieces with 30–85 mm or 18 workpieces with 30–130 mm Max. main spindle speed: 7,500 rpm Main spindle power at duty cycle 10–40/100% max.: 25/16 kW Main spindle torque at duty cycle 10–40/100% max.: 200 Nm Main spindle front bearing diameter: 80 mm Main spindle flange size: Size 5 (DIN 55026) Axes at main spindle unit: X/Z Turret: bottom Number of stations/driven stations: 12/12 Tool mounting in turret: VDI 40 Rapid traverse speed X-axis: 60 m/min Rapid traverse speed Y-axis: 30 m/min Feed force in X/Z main spindle unit: 5,000 N Direct linear measuring system main spindle unit: X/Z MACHINE DETAILS Control: Fanuc 18i TB Electrical Data Operating voltage: 400/50 V/Hz Main fuse: 80 A Total connected load: 36 kVA Dimensions & Weight Machine dimensions (LxWxH): approx. 2,500 x 1,900 x 2,300 mm Overall system footprint (LxWxH): approx. 3,600 x 1,900 x 2,300 mm Machine weight: approx. 6,000 kg Operating hours: approx. 49,479 h EQUIPMENT Full-stroke cylinder on main spindle Splash guard enclosure with fully encapsulated working area Work area lighting Oil/emulsion mist extraction system Hinged belt chip conveyor (discharge height: 1250 mm) Coolant system Circulating parts storage conveyor Automatic central lubrication Lrsdpfxexu Ekbe Adwog

Year of construction: 2007, condition: excellent (used), functionality: fully functional, machine/vehicle number: 41357/07, For sale: automatic centrifuge Rösler Z 800 HA-Turbo-Floc, designed for cleaning and recycling process fluids (water, emulsions, baths). The machine efficiently separates solid particles and sludge from liquids, thus extending the service life of process media and reducing operating costs. ✅ Capacity up to 800 l/h ✅ Automatic operation ✅ Ideal for electroplating plants, paint shops, and machining operations Ledpfx Adjxl Hpmsworg ✅ Reliable German manufacturer In very good condition.

Condition: repair required (used), Year of construction: 2011, functionality: not functional, machine/vehicle number: 8506, operating pressure: 2,000 bar, Equipment: documentation/manual, 1. Product Overview We are pleased to offer a second-hand MiniDeBEE New Generation of High Pressu Homogenizer, specially suited for cell lysis, particle size reduction, production of nano and micro-emulsion. Perfect mix between laboratory and pilot scale. Scaling up guaranteed. 2. Technical Specifications Model: MiniDeBEE 2011 - up to 2000 bar Max Flow rate: 200 ml/min Condition: Used for 1.5 years at Cosaic - Currently NOT FUNCTIONAL ; Lrodpfxjxuvm Hj Adweg (problem diagnosed with Pion’s support.Cost repair spare parts up to 2500 EUR;

Condition: excellent (used), Coolant mixer Emulsion mixer Nimatec Stock number (28599) Lodpfx Adjwf Ht Iewsrg 1/2-inch water supply connection

Condition: excellent (used), The Seydelmann AG160 angle grinder is a high-capacity industrial meat grinder known for its robust construction, efficiency, and versatility in processing a variety of meat products. Equipped with a strong motor of 42kW power the AG160 delivers the solution for continuous, heavy-duty grinding operations, ensuring consistent throughput. Lrodpfx Adeq Rb Uuoweg In set with various cutting sets, allowing for different grinding sizes and textures. This versatility makes it suitable for a range of products, from fine emulsions to coarse grinds. Equipped with integrated loading for 200l meat bins. Throat diameter: 160mm Power: 42kW Hopper capacity: 400l Total dimensions: L: 3000 x W: 2100 x H:2100mm

Condition: like new (used), machine/vehicle number: 00399, LT Industries – Quantum 1200 Plus, model 20 channel multiplexer • Real-Time Multi-Constituent Process Analyzers • Multipoint, Fiber Optic Multiplexing Capability • Shock and Vibration Free The LT Industries Quantum 1200 Process Analyzer Series is comprised of the rugged, rapid scanning Quantum 2000 and 1200 Systems which were developed for both Pilot Plant and dedicated stand-alone installations in closed-loop-control of manufacturing processes. Using rugged, proven technology, LT Industries' systems enhance quality control, increase yield and reduce waste by providing real-time analysis. The sampling process is non-destructive and non-extractive, involving none of the sample preparation required by other testing technologies. LT Industries' Quantum 1200 Process Analyzers provide continuous multiple analyses in real-time. These analyses have proven to be as accurate as traditional lab testing for liquids, powders, solids, slurries, pastes, emulsions and/or suspensions. These systems deliver the real-time data output that has made LT Industries a recognized NIR leader in process measurement for control. Artisan Scientific Corporation dba Artisan Technology Group is not affiliated with or a distributor for LT Industries. The depiction, description, or sale of products featuring names, trademarks, brands, and logos is for identification and/or reference purposes only and does not indicate any affiliation with or authorization by any rights holder. Lsdpfx Adsg Tdwvjwjrg T Industries' Quantum 1200 Process Analyzers provide continuous multiple analyses in real-time. These analyses have proven to be as accurate as traditional lab testing for liquids, powders, solids, slurries, pastes, emulsions and/or suspensions. Our systems deliver the real-time data out-put that has made LT Industries a recognized NIR leader in process measurement for control. The Quantum 1200 Process Analyzer Series combines analytical power and intelligence with ease of use in an integrated systems package. A pre-dispersed, monochromatic beam of light travels through the patented harmonic drive grating mechanism, where is it separated into discrete wavelengths and sent through a fibre optic link to illuminate the sample. The light transmitted back through the fibre optic link is converted into an electrical signal, which is compared by the microprocessor to the calibrated responses in memory. The data output results of this comparison are then used for process control Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment Delivery condition, FCA: Oradea/Romania We can deliver/export everywhere in the World. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: like new (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45 m/min, rapid traverse Y-axis: 45 m/min, rapid traverse Z-axis: 45 m/min, controller model: Heidenhain iTNC530, table width: 1,070 mm, table length: 700 mm, overall weight: 10,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 16,533 h, spindle nose: SK40, number of slots in tool magazine: 38, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, Once again, a very neat HERMLE C40V coming from a mold making workshop. The machine is in excellent condition and can also be viewed under power at our facility! This machine is standard equipped with: Blum tool laser, Heidenhain TS440 probe, custom-made coolant table, lockable roof (accordion style), original documentation, spindle and emulsion cooler. Lrjdoxd U N Sepfx Adwog

Year of construction: 1995, condition: used, CNC control - 11 axes Wenzler: Loading and unloading gantry CNC control: Sinumerik 810 linked with CNC control via PLC BAZ with 8 power chucks, vertically arranged on clamping drum: The MTA 8 is currently used to completely machine shaft-like workpieces with a length of approx. 200 mm and a diameter of approx. 20 mm: Machining:: Face turning - Longitudinal turning - Drilling - Thread forming - Internal hexagon whirling - External thread chased 6 machining stations with: ARTIS - tool control 4 machining stations with: internal tool cooling space requirement: approx. 40 m² Lrjdocqyfmopfx Adwog ARTIS cutting force monitoring complete hydraulic system and electric control cabinets complete coolant system Cleaning plant for emulsion 2 pieces platform Spaeenfoerderer Oil pans Palletizing system Fa. Metabo Suction system various tool holders, clamping devices very good NP of the plant 1,35 Mio Machine no. 306 Weight: 17 t