Used Endless Digital Printer for sale (9,962)

Condition: good (used), Year of construction: 2016, operating hours: 14,600 h, functionality: fully functional, machine/vehicle number: 1087-1210063, Printing solution: Xeikon QA-P toner Working resolution: Digital frontend Xeikon X-800 with toner optimization module Finishing solution: Unwinder, WFM, high-capacity stacker, Kern end processing solution Guodpox Ap Rhofx Ah Dok Year of manufacture: 2016 If interested, we are happy to provide further information or video material. Disassembly was carried out by the Xeikon representative.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: SP0119240003037, Year of construction: 2019, input voltage: 240 V, Equipment: CE marking, Bound Metal Deposition™ metal 3D printing system composed of: - printer - debinder - sintering furnace - frequency converter for 60Hz furnace power supply. System in perfect condition, used for R&D in a climate-controlled environment. Printer equipped with 2 nozzles (0.40mm diameter) and one high-definition nozzle (0.25mm diameter). Furnace equipped with a technical gas supply system from an external installation. Set of original replacement parts for furnace (ceramic setters, graphite retort shelves, gaskets, filters, vacuum pump oil). Firmware updated to the latest release throughout the system. Material cartridges included: 1x AISI 316L 1x 17-4PH 1x ceramic support Godpfx Ahsxlclds Deuk

Condition: new, functionality: fully functional, number of print heads: 1, - I am offering for sale a new Ricoh Ri 1000 DTG (Direct to Garment) printer! - As can be seen in the pictures, the printer has never been used. If you check the photos, you can see that the printhead hoses are new, with no ink ever having passed through them. - Note: The printer is sold without the platen (it is available on specialized websites for $200-300) and without ink cartridges. - The warranty has expired because I have had it for about 2-3 years! (I bought this printer together with two other DTG printers, but unfortunately I could not use all three at the same time, so this one was never put into operation.) - It has been kept in a clean place, free from temperature fluctuations. Gedpjxwqnqefx Ah Dsuk

Condition: excellent (used), Eos EOS P 396 | PSW 3.8 – Industrial 3D Printer (Laser Sintering System, SLS, CO₂ Laser) The machine has been serviced regularly (last service: 08/2024). It has exclusively processed PA11 (EOS PA1101). The system is offered including accessories: 1 x build box, docking station, multibox with cooler Operating hours: 5,962.3 h "The printer has been equipped with a new IntelliScan III scanner including a laser deflection head and has been thoroughly inspected." For sale is an EOS P 396 with PSW 3.8, a high-precision industrial system for additive manufacturing (Selective Laser Sintering, SLS). The system is suitable for the production of complex plastic components for both series and prototype manufacturing. Base machine with control cabinet & control terminal Exchangeable frame with build platform Blade cassette II (blue) Software: Windows 7 Process software (PSW) EOSTATE Basic Parameter set: PA 2200 Balance Cooling system (termotek): Cooling capacity: 1,400 W at 20°C water / 18°C process water Pump capacity: 5 l/min at 3.5 bar Electrical power: 230 V, 50/60 Hz, 7.5 A Refrigerant: R134a (max. charge: 420 g) Multibox is a typical EOS accessory for powder handling, used for transporting and interim storage of material. Technical Data: Laser and Optics: Laser type: CO₂ laser Rated power: 70 W Wavelength: 10.55 – 10.63 μm Laser safety class: 1 (closed) / 4 (open) Focused beam diameter: approx. 0.6 mm Heated F-theta lens, focal length: 500 mm High-speed galvanometer scanner with temperature compensation Exposure area: 350 × 350 mm Beam deflection speed: max. 6 m/s Mechanics & Build Volume: Build chamber: 350 × 350 × 620 mm X-axis (coater): Travel 690 mm, speed max. 200 mm/s Z-axis (build platform): Travel 650 mm, speed max. 6 mm/s, resolution 0.01 mm Powder dosing via grooved roller Heating Systems: Process chamber heating: 3.0 kW, infrared twin tube radiator with pyrometer control Take-off chamber heating: 1.6 kW, resistance heater coil with separate temperature measurement Control & Operation: Process computer with Windows 7 OS 15.1" TFT display, membrane keypad & mouse Ethernet network connection Other: Noise emission: < 70 dB(A) Electrical Data: Voltage: 400 V 3~/N/PE Frequency: 50 / 60 Hz Rated power: 10 kW Rated short-circuit current: 5 kA Current draw (full load): 16.0 A Line protection: 32 A Total weight: approx. 1,400 kg Condition: used Scope of delivery: (see picture) Base machine with control cabinet & control terminal Gujdpjxw Uyqefx Ah Dok Exchangeable frame with build platform Blade cassette II (blue) Software: Windows 7 Process software (PSW) EOSTATE Basic Parameter set PA 2200 Balance Cooling system (termotek) Multibox (Specifications and information are subject to change and correction!) For further questions, please feel free to contact us by phone.

Year of construction: 2025, condition: new, Inkjet printer for coding / marking Large, clear touch display Up to five-line coding possible (34 dot) Guodpjx Dx Tnefx Ah Dsk An automatic nozzle cleaning program cleans the nozzle after each shutdown An automatic nozzle sealing system closes the nozzle after shutdown and protects it from drying out for extended periods Multiple nozzle sizes can be used without complex device modifications Convertible for pigmented inks Further information and machines available upon request

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, I bought the machine used myself and had a comprehensive full service carried out. Two full, unopened ink cartridges are also included. I recently had the magenta light and cyan light print heads deactivated, but they can be reactivated at any time. When I bought it, only one white print head was active. Guedsw R Tx Tepfx Ah Dek The printer works perfectly. For the photo, I removed the nozzle cover, which, of course, is included ;) The roll printing attachment is also included. I simply don't need it often enough. Transport must be organized by the buyer.

Condition: good (used), functionality: fully functional, Ready to go – packed on pallet – only 1,775,828 colour prints! 1. Colour prints: approx. 1,775,828 2. B/W prints: approx. 88,161 3. Total prints: approx. 1,863,989 4. Colour large: 1,682,481 5. B/W large: 36,136 6. Fiery, etc. Gjdew Hgg Dopfx Ah Deuk Price is net plus VAT or for export Inspection welcome – direct transport recommended.

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, The HP Latex R1000 is a highly versatile, large-format flatbed and hybrid printer capable of printing on both rigid and flexible materials. This makes it an ideal solution for sign making, signage, décor, and display printing — perfectly suited to businesses aiming to offer high-quality prints on a wide range of substrates. Trusted by digital printing professionals. Key Features: Versatile Media Handling: The R1000 processes a broad spectrum of media — from rigid boards (e.g., acrylic, aluminium composites, wood, PVC, plastic panels) to flexible materials (e.g., banners, vinyl, self-adhesive films, textiles, canvas). Large Format & Material Thickness: Supports maximum working widths of approximately 1.60–1.64 m and material thicknesses up to around 5 cm (50.8 mm). Superior Print Quality: Achieves up to 1200 × 1200 dpi resolutions, with fine 10 pl ink drop sizes and an extensive color gamut. Water-Based Latex Inks: Environmentally friendly and low-odor — ideal for indoor or sensitive environments — providing durable, scratch-resistant finishes thanks to a special overcoat/sealing layer. White Ink Support: The R1000 also supports white ink, allowing for white highlights or printing on dark/transparent substrates. The white printheads are automatically managed to prevent ink wastage between white print jobs. Productivity & Flexibility: Depending on print mode, the R1000 delivers production speeds of up to approx. 28 m²/h (indoor) and up to approx. 56 m²/h (outdoor/panels, 3-pass). Efficient, Intelligent Workflow: Equipped with a built-in print server and an intuitive user interface — operable from both sides. Features such as automatic maintenance, media recognition, and vacuum system facilitate operation and enhance reliability & uptime. Typical Applications: The HP Latex R1000 is particularly suited for: Sign making: signs, displays, posters, roll-ups Shop/POS decoration, exhibition stand construction, POS displays Gedpfex Aihgjx Ah Djuk Indoor and outdoor advertising (banners, films, posters, PVC boards, etc.) Décor and design printing (wood, acrylic, composite panels, PVC, etc.) Short-run or customized jobs with frequently changing materials — ideal for versatile print service providers or agencies.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, operating hours: 200 h, warranty duration: 6 months, Polyamide laser sintering system including two interchangeable containers and unpacking station. The machine can be inspected and tested at any time at the BIBUS Austria demonstration center. Furthermore, the system features a quick-change mechanism between recoating blade and coater roller – the system is always up to date with the latest technology due to continuous upgrades. Guodpoqwkypjfx Ah Dek

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: V MLDV100000, The digital measuring stop for even more stability and heavy material. Technical data: Measuring range: 1000mm (other lengths available on request, 1000-6000mm) Design: digital display For roller conveyors up to 500mm wide DOUBLE manual clamping Swivelling material stop Gas spring assisted lifting Screw-on stop extension Manual free-lifting device - pneumatic also possible as an option. Including 2x linear guide carriage Please specify the desired mounting side (right or left of the machine) when enquiring/ordering. Gedpfxevncl Tj Ah Deuk Your benefits at a glance: Easy handling of heavy material. Utilise all the advantages of the digital measuring stop, even with solid material. Save time. Money. Resources. Even with heavy material. Subject to technical changes. You will receive details of the exact delivery time in the order confirmation. Roller conveyors shown are not included in the scope of delivery.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2020, operating hours: 7,508 h, 💡 Unique Opportunity – Showroom Machine from Official Dealer This machine comes from the demonstration showroom of a former official Markforged and DWS dealer who operated in the Italian market until 2025. It was used exclusively for demonstration purposes, maintained in excellent condition, and has very few operating hours. Now available through 3D Machineries Srl, this represents a rare opportunity to purchase an almost new industrial 3D printer, at a fraction of its original cost – with immediate availability and full transparency on provenance and usage. -----LISTING DESCRIPTION----- Markforged – Complete Metal X System for Metal 3D Printing (Printer + Wash + Sintering Furnace + Accessories) 💰 New value over €200,000 Guodpswzmgtsfx Ah Djk For sale: complete Markforged Metal X system for metal 3D printing, including all necessary components for in-house metal part production using the bound metal printing process (FFF technology + debinding + sintering). ✅ The system comes from a showroom and is in excellent condition. Sale of individual components also considered. The package includes: 🔹 Markforged Metal X 3D Printer 🔹 Markforged Wash-1 – Debinding unit for binder removal 🔹 Markforged Sinter-2 – Industrial sintering furnace 🔹 Argon gas control panel – with reducers and quick couplings 🔹 Original Markforged case – with spare build plates 🔹 Mobile wheels for machine handling 🔹 Isolation transformer Key technical data: Printer model: Metal X (F-PR-5101) Sintering furnace model: Sinter-2 (F-SR-0002) Printer power supply: 100–240 V / 50–60 Hz / 12.6 A Furnace power supply: 200–240 V AC 30+PE | 347–415 V AC 30+N+PE / 30 A Certifications: CE, FCC, UL, RCM, UKCA Assembled in the USA ✅ The Metal X system enables printing of stainless steel components (17-4 PH, 316L), pure copper, Inconel, and tool steel ✅ Ideal for machine shops, R&D departments, prototyping centers, and companies in the aerospace and automotive sectors 💡 The new value of the complete package is over €200,000. 📦 Option for separate sale: printer, wash unit, sintering furnace, accessories. 📩 Contact us to receive a detailed price list, images, videos, usage hours or to schedule an inspection.

Condition: like new (used), Year of construction: 2021, operating hours: 500 h, 1050 including holder for 2 heads The Thermo-Inkjet 1050 was designed as a low-maintenance, easy-to-use industrial printer and produces high-resolution text, logos and graphics as well as 100% error-free readable barcodes. Gjdpfxorz N Imo Ah Dsuk

Condition: ready for operation (used), functionality: fully functional, • 1 x Xerox Versant 80, fully serviced and under regular maintenance every year, including: • Xerox Dual OHCF tray • Xerox FIM module • Xerox Light Pro • Finisher • Xerox Squarefold trimmer • Fiery EX 80 • Counter: o Color: 1,658,475 o B/W: 690,572 o Total: 2,349,048 o Col. Large: 1,533,545 o B/W large: 570,667 • Packed on 5 pallets, ready to ship Gsdpfxsw Hga Dj Ah Deuk Inspection welcome – price is net + VAT or for export

Condition: excellent (used), Year of construction: 2021, Efi Vutek H5 Under service contract since installation in 2021. Gsdsxanwzjpfx Ah Djuk Configuration: 8 colors + w For extra 9.000€ extra we can include RIP Caldera V18 with driver and profiles and 100 liters of inks, 20 liters per colours CMYKW . (which costs 14.000€) Productivity: 109 boards per hour Under production. Price includes decommissioning and loading on truck. Pictures and videos available upon request. For further technical information, please refer to enclosed brochure.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, number of ink cartridges: 5, color channels: 5, number of print heads: 5, resolution (max.): 1,200 dpi, total length: 305 mm, total width: 114 mm, total height: 114 mm, space requirement length: 23,100 mm, space requirement width: 6,400 mm, space requirement height: 16,800 mm, year of last overhaul: 2024, type of input current: three-phase, input voltage: 230 V, Equipment: auto duplex, brochure finisher, raster image processor, The Helix® Digital Cylindrical Printer is designed to print high quality full colour images (CMYKWW + varnish) on straight and conical cylinders. Fast and flexible, this cylinder printing machine is ideal for use in the beverage, barware, candle and industrial printing industries. The Helix® UV Cylindrical Printer achieves the perfect balance between speed and image quality with patented Helix® software that places 7 picolitre ink drops precisely along the cylinder at extremely high speeds. This rugged, state-of-the-art machine is designed and built in the USA. The Helix® has a wide frame, allowing easy access and maintenance of the machine. It also has a backlit interior for even greater ease of service. The machine has been additionally equipped with an additional 80mm UV lamp, which has increased the print height to 190mm. We have successfully printed on metal thermoses, glass and plastic bottles. CMYKWVV ink configuration. Guodpfx Ahevncile Dek The condition of the machine is very good, both visually and technically. The machine is still in constant use. It is possible to see and present the machine.

Condition: excellent (used), Eos Type: EOS M270 Metal laser sintering system Laser sintering system 200 Watt Yb fiber laser Material processed with the system: Tungsten Laser hours: 8018 Usable build volume: 250 mm x 250 mm x 215 mm (incl. build platform) Layer thickness: 20 μm or 40 μm Precision optics: F-theta lens, high-speed scanner System was upgraded to Scanlab hurrySCAN 30 for a more precise print image Focus diameter 100 μm Dimensions (W x D x H) System: 2,000 mm x 1,050 mm x 1,940 mm Weight approx. 1,130 kg Gedpfx Aeu Ebpceh Douk For further technical information, please contact the manufacturer. Scope of delivery: Eos M270, cooler and software Condition: used (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Keyence Type: VHX-5000 Only 10 operating hours! Gedpfjwr Ax Hex Ah Douk Technical data: Frame rate: 50 F/S (max.) Resolution: Normal: 1600 (H) x 1200 (V) Approx. 1000 TV lines 3CMOS *1, *3: 1600 (H) x 1200 (V) Approx. 1200 TV lines (2 million pixels x 3CMOS mode). Excellent color reproducibility. High Definition*3: 3200 (H) x 2400 (V) Approx. 1600 TV lines Super fine*3: 4800 (H) x 3600 (V) Approx. 2000 TV lines or more 18 Megapixel x 3CMOS*2, *3: 4800 (H) x 3600 (V) Approx. 2000 TV lines or more (18 million pixels x 3CMOS mode). Excellent color reproducibility. High dynamic range: Each RGB pixel in 16-bit resolution Electronic shutter: Automatic, Manual, 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/5000, 1/9000, 1/19000 Supercharge shutter: 0.2 sec. to 4 sec. Adjustable in 0.1 sec. steps. White balance: Push-set, auto, manual, preset (2700 K, 3200 K, 5600 K, 9000 K) LCD monitor*5: Size color LCD (IPS) 23" Panel size 509.184 (H) x 286.416 (V) mm Pixel pitch 0.2652 (H) x 0.2652 (V) mm Number of pixels 1920 (H) x 1080 (V) (FHD) Display color approx. 16.77 million colors *4 Brightness 300 cd/m2 (center 1 point, typical) Contrast ratio 1000:1 (typical) Viewing angle ±89° (typical, horizontal), ±89° (typical, vertical) Approx. 1,680,000 images (if a 2-megapixel image is compressed) up to approx. 55,000 images (if a 2-megapixel image is not compressed) Image format: With compression: JPEG; Without compression: TIFF Maximum image size 20,000 pixels (H) x 20,000 pixels (V) (with image stitching function) Light source: Super bright LED lamp Lamp life 40,000 hours (reference value) Color temperature 5700 K (typical) List of components: VHX-5000 control unit VHX-2000D digital microscope VHX-S90BE Free-angle Observation System base unit VHX-S90F Free-angle Observation System lens holder VH-Z250R Dual-light high-resolution zoom lens 250x - 2500x Condition: used Scope of delivery: (As shown) (Changes and errors in technical data and information excepted!) We are happy to answer further questions by phone.

Condition: good (used), 3D Systems Type: ProX™ 800 ProX™ 800 3D Production Printer by 3D Systems – High-performance SLA Printer Machine has been regularly maintained Operating hours: 18,700 (as of 18.04.2023) Not operated after 18.04.2023 Note: Annual servicing carried out up to dismantling For sale is a used ProX 800 stereolithography (SLA) production printer from 3D Systems. This large-format SLA system is equipped with the latest printhead technology and is suitable for high-precision components and industrial applications (e.g. automotive, aerospace, medical technology). Additional features: - Automatic material replenishment system and pre-assembled material supply module (quick module change, uninterrupted operation) - 3D-Manage™ software for CAD model and print job management - Touchscreen operation on the device (Print3D Pro™) - Status/signal light module, central user interface - Comprehensive safety system including laser safety monitoring (Class I), emergency stop switches, and interlocks - Detailed maintenance and error diagnostics functions - Material container (MDM) Technical Data: - Printing technology: Stereolithography (SLA) with frequency-tripled Nd:YVO4 UV solid-state laser (355 nm, max. 3 W) - Maximum build volume: approx. 650 × 750 × 550 mm - Dimensions (L × W × H): approx. 1370 × 1600 × 2260 mm - Weight: approx. 907 kg - Resolution: up to 0.00127 mm (laser spot size), 4000 DPI - Accuracy: ± 0.025–0.05 mm per inch - Materials: Wide range of Accura resins (tough, transparent, high-temperature resistant, biocompatible, etc.) Electrical connection: - Power supply: 200–240 V AC - Frequency: 50/60 Hz - Phase: Single-phase - Fuse: 30 A - Weight: approx. 1200 kg incl. material module Godpfexam Ifjx Ah Douk Condition: used Scope of delivery: (see picture) (Specifications and technical details subject to change and errors!) If you have further questions, we are happy to answer them by phone.

Condition: excellent (used), ProJet 3000 HD 3D Printer Here we offer you an untested ProJet 3D Printer. The ProJetTM HD 3000 prints precise plastic parts for use in functional testing, communication models, rapid manufacturing, rapid tooling and more. Gusdpjg I Iv Rjfx Ah Dek With features such as a wide material selection, multiple resolution modes and ease of use, this office-friendly 3D printer accelerates and maximizes your return on investment (ROI). Print Modes HD - High Definition UHD - Ultra High Definition Net build volume (xyz) HD Mode 298 x 185 x 203 mm UHD Mode 127 x 178 x 152 mm XHD Mode n/a Resolution: HD mode 375 x 375 x 790 DPI (xyz); 32μ layer thickness. UHD mode 750 x 750 x 890 DPI (xyz); 29μ layer thickness XHD mode n/a Accuracy (typical) 0.1 - 0.2 % of part dimension Accuracy depends on build parameters, part geometry, part placement and post-processor settings Email Notification: No Build Materials: VisiJet® EX200 build material Solid material with high durability. VisiJet® SR200 Construction Material Inexpensive multi-purpose material. Available in natural, blue or grey. VisiJet® HR200 construction material Available in blue, specially developed for investment casting applications. Backing material: VisiJet® S100 support material: non-toxic wax material for melting supports without hand application. Power supply: 100-127 VAC, 50/60 Hz, single phase, 15A Dimensions (LxWxH) printer without packaging 737 x 1215 x 1504 mm Weight: Printer without packaging

Condition: excellent (used), 3D systems Type: DT60 Print volume 600 x 450 x 450 mm Outer dimensions 1265 x 780 x 1725 mm Precision in Z axis: 1.25 micron Precision in X and Y axis: 7.5 microns Max. Extruder temperature 500 ºC Max. Installation space temperature 120 ºC Die diameter 0.6 mm Other available Die diameter 0.2 / 0.4 / 0.8 / 1 / 1.2 mm Thermal barrier made of titanium Two independent extruders Heated filament feed 4 print modes : SINGLE, DUAL, TWIN, REFLEX 220 - 240 V, 50-60 Hz Maximum consumption 3 kW/h 7" LCD touch screen Remote monitoring Industry 4.0 capable: WiFi, Ethernet, HotSpot, USB MMS System - Modular Maintenance System Double filament loading Automatic filament change Heated feeder Jam detection Sensor for detecting end of filament Print recovery system Liquid cooling Double tempered glass Base fixed by vacuum High printing speed Positioning controlled via encoder Condition: used Gedsnnzyqjpfx Ah Douk Scope of delivery: (See pictures) (Sale ex location!) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2018, condition: excellent (used), Keyence Here we offer you a microscope. Full HD resolution, KEYENCE REMAX graphics system, LED light source Measurements can be carried out in the live image or in saved documents. Intuitive software Viewing settings such as magnification and lighting method are saved together with the image. This allows images to be reproduced with previously used settings and necessary information with images to be exported directly into analysis reports. From the lenses to the camera to the graphics system and object stage, all components are designed as a complete system. The sophisticated interaction between the elements ensures maximum performance. Model VHX-6000 Camera Gujdpfxoiy A Ngs Ah Dek Image sensor: 1/1.8-inch CMOS image sensor Virtual pixels: 1600 (H) × 1200 (V) Scanning system: Full frame method Frame rate: 50 fps (max.) Resolution 2 million pixels: 1600 (H) × 1200 (V), approx. 1000 TV lines 2 million pixels*1*3: 1600 (H) × 1200 (V), approx. 1200 TV lines (2 million pixels x 3 CMOS mode, excellent color fidelity) 8 million pixels*3: 3200 (H) × 2400 (V), approx. 1600 TV lines 18 million pixels*3: 4800 (H) × 3600 (V), approx. 2000 TV lines or more 18 million pixels*2*3: 4800 (H) × 3600 (V), approx. 2000 TV lines or more (18 million pixels × 3 CMOS mode, excellent color fidelity) High dynamic range: 16-bit intensity range by RGB data from each individual pixel Gain: Auto, Manual, Preset Electronic shutter: Auto, Manual, 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/5000, 1/9000, 1/19000 Supercharge shutter: 0.02 to 4 s White balance: Button setting, Auto, Manual, Preset (2700K, 3200K, 5600K, 9000 K) Rear focus adjustment: Not required LCD monitor*5 Size: Color LCD (IPS), 23 inches Screen size: 509.184 (H) × 286.416 (V) mm Pixel pitch: 0.2652 (H) × 0.2652 (V) mm Number of pixels: 1920 (H) × 1080 (V) (FHD) Display colors: Approx. 16770000 colors*4 Brightness: 300 cd/m2 (Center, 1 dot, typical) Contrast ratio: 1000:1 (typical) Field of view: ±89° (typ., horizontal), ±89° (typ., vertical) CD-R/CD-RW/DVD drive Unit: DVD-ROM drive Usable media: CD-R/CD-RW/DVD±R/DVD±R DL/DVD±RW/DVD-RAM Storage capacity: 8.7 GB (when using DVD±R DL) Hard drive storage capacity 500 GB (including 165 GB reserve storage) Approx. 1,680,000 images (with compression of 200,000 pixel images) to approx. 55,000 images (without compression of 200,000 pixel images) Image format JPEG (with compression), TIFF (without compression) Viewable image size: 20,000 (H) × 20,000 (V) pixels (when composing images) Universal zoom lens VH-Z20R/Z20T Weight: Approx. 20 kg Year of manufacture: 2018 The device is in mint condition and has only been used very rarely. Type: VHX-6000 Condition: used Scope of delivery: (as shown) (Subject to changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer you an Objet Stratasys 3D printer. The Objet Connex 500 is the pioneering multi-material 3D printer from Objet. With a large footprint of 500 x 400 x 200 mm, designers and engineers can quickly prototype, to more closely simulate the intended end product than any other technology. What is unique about the Objet Connex? With Objet's patented simultaneous multi-material molding technology, the Objet Connex 500 can produce print models from up to 14 different materials in a single print job. The system is ideal for designers and engineers who want to effectively highlight the different material components in complex or composite products. Freedom to choose your own materials The Objet Connex500 offers an unmatched selection of over 60 materials, including up to 51 Digital Materials ™. It allows users to simulate various mechanical and physical properties, from rubber to rigid, opaque to transparent; and standard to ABS engineering plastics. Outstanding productivity The Objet Connex 500 offers: - Multi-material models - no more designing, printing and gluing together separate model elements. Gedog S A N Tjpfx Ah Douk - Different parts. Different materials. Same tray - saves time and serves multiple needs at the same time. - Excellent 16 micron high resolution printing accuracy - 600 DPI X & Y resolution - Thin walls

Condition: excellent (used), Stratasys Type: Stratasys 3D printer PolyJet printer J750 Objet Stratasys 3D printer The Stratasys J750 3D printers allow you to optimize and streamline the process of producing models from different materials with one build platform in the same print job. In the design phase, the J750 3D printer (with CAD software) can be used to assign colors to parts of a model. Gsdjizah Aopfx Ah Deuk The model can then be saved as a VRML file and printed with the desired colors. The Stratasys J750 3D printer has a build volume of 490 mm × 390 mm × 200 mm (19.3 x 15.35 x 7.8 in). AC connection 100–120 VAC, 50–60 Hz, 13.5 A, 1-phase Or 220–240 VAC, 50–60 Hz, 7 A, 1-phase Materials Agilus30 family Digital ABS Plus Tango Transparent Vero family Veroflex VeroUltra Opaque SUP705, SUP706 support material Applications Rapid prototyping Concept models Medical models Equipment and devices Colored textures Total printing time on the machine is approx. 1483 hours Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Arburg Gusdjizaikjpfx Ah Dsk Type: Arburg Freeformer 300-3X Additive manufacturing of complex functional components With high-temperature option The new large freeformer 300-3X processes three components in the ARBURG Plastic Freeformer (AKF) and - for the first time worldwide - enables industrial additive manufacturing of complex functional components in a resilient hard/soft combination with support structure. The designation 300 stands for the available component support area in square centimeters. Compared to the freeformer 200-3X, the installation space now offers 50 percent more room for parts with dimensions of up to 234 x 134 x 230 millimeters. "3X" stands for the three axes of the component carrier that move in the x, y and z directions. About additive manufacturing Manufacturer Arburg Build volume [cm³] 7211 Installation space X [mm] 234 Installation space Y [mm] 134 Installation space Z [mm] 230 Printing material ABS, PC, PLA Industry class Operating voltage 400 / 400 V 3〜50 Hz Control voltage 24V= Total rated current 11 A Total connection 7.8 kW Year of construction 2019 Running time 1483 hours Weight 1593 kg Condition: used / second-hand Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: like new (used), Year of construction: 2020, Markforged Type: X7 Gen 2 Gedpfxovvlduo Ah Dsuk 3D printer The X7 prints industrial-grade manufacturing fixtures, jaws, tooling, jigs and end-use parts.  Designed for use in production, it prints parts that are stronger than machined aluminum,  at a fraction of the cost.  It combines the best surface quality, build size and reliability.  Speed up production with Turbo Print and verify dimensional accuracy with Blacksmith adaptive manufacturing technology, available only on the X7. Technical specifications: Printer features Process: Fused filament fabrication, continuous fiber reinforcement Build volume: 330 x 270 x 200 mm (13 x 10.6 x 7.9 in) Weight: 48 kg (106 lbs) Footprint: 584 x 483 x 914 mm (23 x 19 x 36 in) Print bed: Kinematic coupling - level to within 80 μm Laser: In-process control, active print calibration, bed leveling Extrusion system: 2nd generation extruder, out-of-plastic and out-of-fiber detection Power supply: 100-240 VAC, 150 W (2 A peak) RF module: Frequency range 2.4 GHz Wi-Fi standards 802.11 b/g/n Materials Available plastics: Onyx, Onyx FR, Onyx ESD, Nylon White, P-PLA, S-TPU 95A Available Fibers: Carbon fiber, Carbon fiber FR, Glass fiber, Aramid fiber (Kevlar®), HSHT glass fiber Tensile strength: 800 MPa (25.8x ABS, 2.6x 6061-T6 aluminum) * Tensile modulus: 60 GPa (26.9x ABS, 0.87x 6061-T6 aluminum) * Part properties Layer height: 100 μm standard, 50 μm minimum, 250 μm maximum Filling: closed cell filling: multiple geometries available Software Eiger Cloud: Slicing, parts and build job management (other options at additional cost) Security: 2-factor authentication, Org Admin access, single sign-on Blacksmith: Adaptive manufacturing platform (additional purchase required) Year of manufacture: 2020 last maintenance in December 2024 On sale from Location Condition: used Scope of delivery: (see pictures) one roll each of Kevlar, fiberglass and carbon fiber, 11 started remaining filament rolls of Onyx (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.