Used Engraving for sale (343)

Year of construction: 2020, condition: excellent (used), 2020 Coherent EasyJewel 5 Premium Desktop Class 1 Fibre Laser Marking and Engraving System With Rotary Axis Hnedpfszvpy Nex Akreu The Coherent EasyJewel 5 Is A Premium Desktop Class 1 Fibre Laser Marking & Engraving System Designed Primarily For Jewellery, Watches, Medical Devices, Precision Engineering & Small Industrial Components. It Is Capable Of High-Resolution Engraving, Deep Engraving, Annealing, 2D Code Marking, Optional 3D Engraving Using Coherent's Laser Suite Software. Chamber Dimension W300 x D200 x H120mm. Marking Field Options Standard Lenses Include Fields Like 120 x 120mm, 180 x 180mm, or 240 x 240mm. Pulse Width 4 to 200ns. Pilot Lase: 660nm (Visible Red Guide). 'Z' Axis Travel 120mm. Voltage 230V. S/No. 40475422 (2020). With BOFA Extraction & Filtration Unit, Laptop With Software, EasyJewel Special Ring Holders, EasyJewel Chuck For Bangle/Bracelet Marking & EasyJewel Chuck For Irregular Shaped Rings. Overall Dimensions L770 x W540 x H750mm. Weight Approx. 87kg.

Condition: used, Laserline Type: LPC03 Lascon laser system with Lascon controller LPC03 Laserline diode laser The diode laser ›LDM 500-60‹ has a wavelength of 935 nanometers and an output power of 550 watts. Laser type: LDM 500-60 Wavelength of 935 nanometers +/- 10% Laser power: 550 W Supply voltage 100-264V +/- 10% Max. power consumption 1.7 kW Frequency 1 phase 47-63 Hz Laser class 1 Hodezdqkrepfx Akrjnu Type: LDM 500-60 Lascon controller LPC03 The LPC03 has the processing power of a complete PC in a very small space. Instead of a hard drive, a removable flash disk has been installed. Due to the elimination of the hard drive and the extremely low heat generation, the LPC03 is therefore ideally suited for tasks in the field of measurement, control and regulation in an industrial environment. The fiber-coupled MA pyrometers QP004 and EP004 can be easily integrated into the device. The fiber optic cable is then simply connected to the rear panel. The housing also provides space for the PCI card PCI-1P. In conjunction with the LASCON measurement and control system, the operating system and software are installed on the flash disk. Technical data: Motherboard: Half Size CPU card Slots: 1 x PCI, length max. 180 mm Drives: none Storage medium: removable flash disk Connections: USB front; Ethernet, RS232, VGA, keypad, mouse, USB rear Housing: 212 mm x 80 mm x 250 mm (height x width x depth) Protection class: Front: IP40 Environment: 15°C - 40°C Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Trumpf Vectormark Type: VMc2 Trumpf Vectormark laser marker with Fuchs extraction and filtration units Trumpf Vectormark GREEN 532nm Trumpf VMc2 Laser marker, with frequency-doubled, diode-pumped Nd:YAG laser with Hurryscan 10 – galvo head from Scanlab Fuchs extraction and filtration units TKFD The integrated pre-separator ensures high filter capacity Different filter stages are possible and can be perfectly adapted to individual requirements Ideal for confined spaces – can be placed under a table or integrated into machines Welding fume extraction class W3, IFA certified Hnsdpfxozdqcue Akrju TKFD can also be transported in the trunk without modification Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, Panasonic SUNX Type: LP-431-C Laser Marker Product Features: Class 4 CO2 laser Micro-marking Wavelength: 10.6 microm, 0.417 mil Laser power, continuous wave: approx. 30 W Speed: 240 m/min or less Weight of marking head: 20 kg Weight of control unit: 12 kg Marking field size with process area cover: 0-55 mm or 0-2.2 inches Hjdpfx Akjzdqpzjrsnu Permissible ambient temperature: 0 - 40 degrees Celsius Permissible humidity: 35% - 85% Requires 90V to 132VAC, 180V to 264VAC, 50/60Hz Air-cooled Printing options: letters, numbers, katakana, hiragana, kanji, symbols, up to 50 user-defined characters, QR Code, Micro QR Code, Data Matrix, GS1 Data Matrix, and bar codes Condition: used Scope of delivery: (See image) (Subject to change and errors in technical data and specifications!) We will gladly answer any further questions you may have over the phone.

Year of construction: 2007, condition: excellent (used), We offer a complete Laser marking machine: - DOMINO DSL1 laser - Cabin according to protection class 1 - axis for rotation - conveyor belt - computer the tipe of laser: DOMINO DSL1 10-60 Laser power: 10 W. Hodpfxed N Hguj Akrjnu Lasertype: closed CO2 laser, 30000 hours medium failure-free time Characters per second: 400 (depending on the product material and system configuration) character height: 0,5 - 120 mm (0,02 - 119,89 mm) focal length: 100 mm (208 mm optional) labeling field: 60 x 60 mm Font: Pseudo-True Type laser head: construction made of stainless steel and aluminum operating temperatur: 15 - 38 C cooling: air Dynamark-Software The following materials can be marked by a CO2 laser: - Painted or coated metals - Glass - ceramics - Carton - Different types of plastic

Condition: used, Panasonic SUNX Hodszdqpnepfx Akrjnu Type: LP-431U-C Laser marker Product features: Class 4 CO2 laser Micro-marking Wavelength: 10.6 microm / 0.417 mil Laser power, continuous wave: approx. 30 W Weight of marking head: 20 kg Weight of control unit: 12 kg Marking field size with process area cover: 0-55 mm or 0 - 2.2 inches Permissible ambient temperature: 0 - 40 degrees Celsius Permissible humidity: 35% - 85% 100 V AC: 1,000 VA or less 200 V AC: 1,200 VA or less Air-cooled Printing options: letters, numbers, katakana, hiragana, kanji, symbols, up to 50 user-defined characters, QR code, Micro QR code, Data Matrix, GS1 Data Matrix, and bar codes Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Engraving machine with computer system Sign Pro 98 Transport and loading can be organised throughout Europe upon request and for an additional fee. Prices are exclusive of VAT. Inspection is possible by appointment. Please contact us—our team will be happy to assist you. Machinery purchase/sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS AND MORE. Hodpjzvfc Tofx Akrenu Are you looking for a high-quality but affordable machine for your production? Or do you want to sell your machine? For more information or to contact us, please use the contact form.

Condition: good (used), Year of construction: 1969, Work table Clamping area 500 x 200 mm Distance between milling spindle and work table 300 mm Longitudinal movement of the table, manual 300 mm Transverse movement of the table, manual 160 mm Template table Template table 550 x 324 mm Distance between pantograph arm and clamping area 20 mm Rotatable 360° Template slots 7 pcs., spacing 45 mm Milling spindle Spindle speeds 1,900 – 15,000 rpm Cutting speed 1 – 226 m/min Motor speed 2,800 rpm Internal taper of the tool spindle 1:5 Hnodeidckfjpfx Akrou Size of the collet bore 6 mm Adjustability of the spindle 1 mm fine, 3 mm coarse Pantograph Transmission ratio 1:1 to 1:50 Drive power 0.2 kW Dimensions Footprint L x W x H 1400 x 1000 x 1420 mm Weight 260 kg Accessories / Special features: • 1 set of templates with letters and numbers • Stylus

Condition: like new (used), Year of construction: 2022, operating hours: 7 h, functionality: fully functional, input voltage: 230 V, type of input current: AC, laser power: 3 W, type of cooling: air, total width: 300 mm, total height: 125 mm, total length: 330 mm, working range: 300 mm, overall weight: 44 kg, scan area length: 330 mm, scan area width: 330 mm, travel distance X-axis: 330 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 42 mm, input current: 4 A, laser wavelength: 355 nm, path measurement accuracy: 5 mm, ambient temperature (max.): 40 °C, input frequency: 50 Hz, Equipment: documentation/manual, KEYENCE MD-U1020C – 3-Axis UV Laser Marker (wide marking area) 3 identical units available. Built July 2022, delivered new in 2023, only 7 operating hours each. Practically as new, tested and fully functional. DELIVERY AND ON-SITE FUNCTION TEST – INCLUDED IN THE PRICE We deliver personally to your address anywhere in the EU/EEA, by van. No pallet, no freight terminals, no forwarder handling of the sensitive optics – direct door to door. On arrival the system is connected, powered up and a test marking is produced in your presence before handover. You take delivery of a machine you have seen running at your own site, not a crate on a pallet. Scope of the on-site test: connection, power-up and test marking with the supplied system. Integration into an existing production line, fixtures, tooling and application programming are not included, but can be quoted separately. Collection ex works in Örebro, Sweden is of course also possible. SCOPE OF SUPPLY (per unit) Hedpfx Aezw U T Rskronu - MD-U1020C marking head, 355 nm UV, 18.0 kg, IP64 - MC-P1 controller unit, 23.5 kg - Operating console, 2.0 kg - Connecting cables, 4.3 m TECHNICAL DATA - Laser medium: YVO4, wavelength 355 nm (UV), laser class 4 - Laser power: 3 W at 40 kHz (2.5 W at the focal point) - Marking area: 330 x 330 x 42 mm (true 3-axis control, wide-area type) - Standard working distance: 300 mm - Marking resolution: 5 µm - Max. scanning speed: 8,000 mm/s - Digital galvo scanner with linear motor drive, built-in power meter - Interfaces: RS-232C, USB 2.0, Ethernet (10BASE-T / 100BASE-TX) - Power supply: 100–240 V AC ±10 %, 50/60 Hz, max. 800 VA (approx. 250 W average) - Cooling: forced air – no external chiller required - Ambient temperature: 0 to +40 °C - Weights: head 18.0 kg / controller 23.5 kg / console 2.0 kg APPLICATION The 355 nm UV wavelength marks heat-sensitive materials without thermal damage ("cold marking"): plastics and resins, glass, ceramics, films, PCBs, medical devices, connectors and nameplates. High-contrast, permanent, legible codes and logos with minimal material stress. COMMERCIAL Price is per unit, net, delivered. Units can be sold individually or as a package of three. Inspection and test marking under power is also possible by appointment at our location in Örebro, Sweden before purchase. Please contact us for photos, serial numbers and further details.

Condition: used, Year of construction: 1996, Technical details: x-travel: 100 mm y-travel: 100 mm z-travel: 300 mm Table dimensions: 350 x 300 mm air pressure: 6 bar voltage: 220 / 240 V weight of the machine approx.: 40 kg dimensions: L:475 x B:300 x H:700 mm Application for engraving and/or marking work on parts on both straight and curved surfaces. Hnjdpfx Akeu Nu Ugjrou with manual height adjustment with handwheel, digital controls with control unit/device Technifor UC200; size 420x290x100mm (external control command) Foot pedal XPE-M Test plate/table size 350x300mm, cast steel, (slight scratches) pneumatic connections Note: the processing head (engraving unit) is not included in the scope of delivery. *

Condition: used, 3D MICROMAC Type: microCUT laser marking system microCUT Enclosure IPG laser source Raylase 3-axis scanning system Power measurement head 1 Power measurement head 2 Camera system for positioning Camera system for quality inspection Cooler Extraction system Control cabinet with IPCs Coolant distributor Machine dimensions: Machine weight: 2 tons Width 922 mm, Depth 4653 mm, Height 2925 mm Components: Extraction system: Height 2869 mm, Width 760 mm, Depth 1577 mm Cooler: Height 1697 mm, Width 1440 mm, Depth 860 mm Weight (without filling) 500 kg Laser rack: Height 1786 mm, Width 856 mm, Depth 806 mm Weight 500 kg Control cabinet: Height 2001 mm, Width 1616.05 mm, Depth 605 mm Machine connections: Electrical: Mains voltage 3*400 VAC/N/PE Mains current consumption 74A Frequency 50/60Hz Power consumption 51.3kW Control voltage 24/5VDC Main fuse NH 100A gG Modules: Laser source: Mains voltage 400 VAC Frequency 50/60Hz, Power 16.7 kW, Current consumption 59A Cooler: Mains voltage 400V, Frequency 50/60Hz, Current consumption 40A Machine: Consumable media Working pressure 6-10 bar Temperature 10-50°C Quality ISO 8573-1 Solid particles: Class 1 Oil: Class 1 Water: Class 4 Residual oil content < 10µg/m³ Water content < 6 g/m³ Hjdpezdqp Isfx Akronu Pressure dew point 3 °C Consumption < 120 l/min Cooling water cooling unit module: Cooling water outlet temperature 21°C Cooling water return temperature 26°C Setpoint tolerance 1K Cooling water flow rate 69 l/min Free pump pressure 1.5 bar DI water cooling unit Cooling water outlet temperature 26°C Cooling water return temperature 31°C Setpoint tolerance 1K Cooling water flow rate 10 l/min Free pump pressure 1.5 bar Laser source manufacturer IPG Type: YLS-5000 Mode Continuous, Quasi-continuous Wavelength 1070nm Power 5kW Frequency 5 kHZ Scanner manufacturer Raylase AG Type: Axialscan-30-Y Field size 1000x1000 mm Spot diameter 87 1/e²(µm) Resolution < 31 µm Working distance 1198 mm Cooling unit: Manufacturer Riedel Type: PC 250.01-NZ-DI-S Refrigerant R407C 50 Hz Net cooling capacity 38 kW 60Hz Net cooling capacity 40.3 kW Camera system: Manufacturer e2V Type: AVIIVA TM UM2 GE Quality cameras: Manufacturer e2v type: DiViiNA LM1 CL Extraction system: Manufacturer Donaldson Filtration Type: DOWNFLO Oval 3-3 Max. Fan speed 3000 rpm Working pressure: 4.2 bar Pulse duration 100ms Volume of the pressure vessel 92 l Type: microCUT laser marking system Condition: used Scope of delivery: (See pictures) (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 200 h, functionality: fully functional, type of input current: AC, laser power: 700 W, power: 3 kW (4.08 HP), Equipment: cooling unit, cw fiber laser with 750 watts as a stand-alone system or for integration into machines and systems. Due to its high output power, this water-cooled laser is particularly suitable for tasks where a lot of heat is required in the workpiece. This includes, for example, welding metals or plastics, cutting, material removal or structuring. The optional use of a 2D galvo scanner means that the laser beam can also be guided over the workpiece using software. The laser can be modulated digitally and analogue (power setting) and can also be controlled and monitored using control software. Hnedpfeph U Anox Akreu The images show a setup with a galvo scanner. The system can also be optionally equipped with a welding head or cutting head. Laser class 1 can also be achieved by installing side walls and a front door with a laser protection window (all available). The work area can be adjusted in height using an electrically controlled Z axis. The laser system is prepared for integration into a higher-level system, but can also be used as a stand-alone system. In the event of integration, interfaces for interlock, emergency stop, external laser control, etc. are available. Individual components of the system can also be integrated into a system at the customer's site. We are happy to support the customer after consultation and according to their specifications. Some technical data: - maximum 700 watts optical output power - wavelength: 1080 [nm] - power consumption (without cooler): < 3,000 watts - supply: single-phase; 230 VAC / 50 Hz - analog modulation (can be used to adjust power, among other things) - digital modulation up to 20 kHz

Condition: used, Year of construction: 2025, machine/vehicle number: 202530090, total width: 800 mm, total height: 1,200 mm, total length: 800 mm, overall weight: 85 kg, scan area length: 150 mm, scan area width: 150 mm, laser wavelength: 1,064 nm, Laser system for marking, housing with manual lift-up door, focus laser for determining the focus position, Z-axis (software-controlled), rotation unit (360°), mobile extraction unit (Vaupel LAB-1f, 210W, serial no.: CP24-52-1-0209, year of manufacture: 2024). Hedpfx Aszvm Tgjkronu The condition is evident from the attached expert report.

Condition: good (used), Year of construction: 2020, Epilog Cameo Zing 24 Co2 Laser with UML 340 extraction Year of acquisition: 2020 (year of manufacture: 2019/2020) Including rotary engraving device and compressor Laser power: 30 watts Max. working area: 610×305 mm Max. working height: 191 mm Laser safety class: 2 Resolution: 1,000 dpi Hnjdpfx Aeyh Rhkjkrsu Frequency: 10–5,000 pulses/inch Interfaces: 10 Base T-LAN, USB No additional software included. #8480

Condition: good (used), Engraving machine with Heidenhain TNC530i control table diameter 1200mm with Peron High speed spindle max 60000 rpm with Spindle chiller with tool measuring unit lubrication system documentations 4 controlled axis: Y axis - spindle up and down Z axis - spindle right to left A axis - rotary table C axis - spindle tilting Hnodshy Tg Repfx Akrou Under power in our warehouse, possible to test it anytime!

Condition: like new (used), functionality: fully functional, Year of construction: 2023, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Trotec, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, SP3000 400 Watt CO2 • 2.210 x 3.210 mm working area • Laser pointer • Gas kit • InPack Technology™ • 2.5” lens, 5.0” lens • Software-controlled Z-axis • Active laser deflector shield • Air-cooled optics • Operator console without PC • Laser system complies with laser safety class 2 with integrated laser safety class 4 laser source • Traveling exhaust • Digital table exhaust system • Sonar Technology™ • Tandem operation • Standard PC for the operator console with mouse, keyboard, and 24” Full-HD monitor, Windows® 10 Multi-Language, JobControl® Expert pre-installed • Cooler for 400W/380V • Aluminum grid table SP3000 • Matching extractor for optimal results. 3-phase power supply Advantages of the Trotec SP 3000 Spacious working area: The SP 3000’s working area of 2,210 x 3,310 mm is designed for large sheet sizes. The working area is easily accessible from all four sides. The loading width is 2,500 mm, and it is open at the front and rear. The open design allows the system to be loaded from all sides, even during cutting. This makes daily work as productive as possible. Extremely fast cutting with the highest quality: Even at the highest speeds, up to 1 m/sec and 1g acceleration, the SP 3000 delivers the best cutting quality. The innovative drive concept, the precise linear guides, and the innovative drive concept testify to excellent construction, made in Austria. Air-cooled optics for optimal cutting quality: All optics are air-cooled with clean compressed air during laser processing. The optics are kept free from contamination that arises during laser processing. This guarantees maintenance-free operation and a long service life for these high-quality components. Fully enclosed beam path for 24/7 operation: The laser beam is protected along its entire path through the machine. Safe operation is guaranteed. The class 4 laser system can be used as safely as a class 2 system. No additional safety measures are required. Hnodpfxozaq Ike Akrsu Reliability through InPack Technology™ and Harsh Environment Protection: The core of Trotec’s unparalleled mechanical reliability is the fully dust-proof and maintenance-free axis system. Traveling exhaust package: The sophisticated airflow concept with extraction above and below the workpiece guarantees high-quality engraving and unparalleled cutting results. JobControl® software package: Much more than a standard printer driver. With JobControl software, you can optimize the use of your material and customize the workflow to your own needs. Service and support: Your direct connection to the manufacturer of your system guarantees the best service and availability of parts.

Condition: like new (used), Year of construction: 2022, OEM – laser marker / engraving laser (diode pumped YAG-laser) The laser beam source was used for some time to generate plasma as part of a scientific project. Overall, however, it only has few operation time. Due to the short pulse length, this laser is also very suitable as an engraving laser Laser source of the complete system is a 10 Watt diode-pumped YAG-laser with 1064 nm wavelength. The working area is 100 x 100 mm, up to 300 x 300 mm is available as an option. No external cooling is necessary. Input-voltage: 110...240 VAC / 50 Hz. Applications are laser engraving and material ablation. The control software is installed on a PC, optionally also a Laptop can be used. The language of the software can be choosen (German, English). The laser is prepared for an integration into a ‘higher level system’, but can also be used as a 'stand alone' system. Hsdpfxepyg N Aj Akrjnu In this case interfaces for Interlock, emergency stop, laser control etc. are available. We are happy to support the customer according to his requirements.

Year of construction: 1998, condition: like new (used), 65 Watt YAG laser Hedpfxsd Dhw No Akrenu

Condition: used, Year of construction: 1969, functionality: fully functional, machine/vehicle number: Gel/1 02.0026, Used engraving machine Make: Franz Kuhlmann Hedpfx Ajyg Rv Uekronu Serial No.: Gml/1 / 02.0026 with accessories

Condition: like new (used), Year of construction: 2023, GENERAL DESCRIPTION: Advanced tooling with a dense and symmetrical structure of the clamping elements. Designed for precise positioning and rigid clamping of geometrically complex components (e.g., car body panels) during automated welding or spot welding processes. The design features a high degree of repeatability of the base points and is fully adaptable for mounting on a welding rotator. Hodpsz Ng Nyjfx Akronu COMPONENTS: 1. DESTACO brand pneumatic (knee-type) clamps – 30 pieces. Heavy-duty clamping elements responsible for the mechanical locking of the part. 2. FESTO brand compact pneumatic cylinders – 14 pieces. Used for extending the positioning pins or auxiliary locks. 3. Clamp position sensors (inductive/magnetic) – approx. 30 pieces. Monitor the open and closed states of the clamping elements. 4. Pneumatic installation in thermal shields (Pyrojacket type) – a complete system of manifolds with flexible hoses in thick, red, fire-resistant braids, protecting against welding spatter. 5. Valve manifolds / pneumatic distributor blocks – 2 pieces. Control the operating sequences of the individual clamps. 6. Positioning blocks, reference bases (NC blocks) and pins. Precisely milled support points with engraved technological coordinates. 7. Main structural frame – 1 piece. Rigid, stress-relieved welded structure made of closed profiles, equipped with transport lugs and mounting plates for the rotator disc.

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,070 mm, workpiece weight (max.): 150 kg, input voltage: 230 V, type of input current: AC, laser power: 50 W, type of cooling: air, working range: 175 mm, height adjustment type: electric, scan area length: 175 mm, scan area width: 175 mm, table height: 710 mm, table length: 710 mm, table width: 400 mm, laser wavelength: 1,070 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, extraction nozzle diameter: 50 mm, working width: 110 mm, Equipment: cabin, IPG beam source – Laser class 1 · Made in Germany Workstation – Heavy-duty design: - Sit/stand workstation, aluminum housing, fully enclosed - Front door with laser safety glass, bright work lighting - Stainless steel work platform, 25 mm perforated grid (710 × 400 mm) - Manually movable drawer, precision rails, load capacity up to 150 kg - Extraction nozzle DN50, motorized Z-axis (travel distance 500 mm) - Interlock, emergency stop, safety relay Performance Level 4 Fiber Laser: - Diode-pumped ytterbium fiber laser, 50 W - Pulse energy: 1.0 mJ, pulse duration 100 ns - Wavelength: 1060–1070 nm, pulse frequency 20–200 kHz - Beam quality M² < 1.2 - Air-cooled, power consumption < 400 W - Pilot laser + 2 distance lasers (laser class 2) Scanner & Optics: - F-Theta lens F = 160 mm (marking field 110 × 110 mm) - Optional: F = 254 mm, adjustment range up to table height - X-Y galvo scanner for 1064 nm - Max. scan speed 4 m/s Control & Software: - Industrial PC, Windows 11 - Monitor, keyboard & mouse, monitor arm - KOLLTRONIC marking software: text, logos, QR/DataMatrix, barcodes - Matrix function for batch processing - Easy positioning, focusing, designing, working, coding Additional equipment: - Rotary engraving unit for cylindrical parts up to Ø 60 mm - Controller & software upgrade included Hnsdpfxeyim S Io Akrou Operating conditions: - Power supply: 230 V / 50 Hz - Operating temperature: 15–35 °C Condition: - New machine - CE compliant - Made in Germany

Condition: good (used), Year of construction: 2015, For Sale: Trotec Speedy 400 Laser Plotter – 80 Watt (Year 2015) Working area: 1000 x 600 mm, with pass-through capability. The mechanical condition is good. The software and activation keys are included with the machine. Hnsdpfxoxfvkgj Akrou The laser tube wear is consistent with the machine's age and usage.

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,070 mm, input voltage: 230 V, type of input current: AC, laser power: 20 W, type of cooling: air, total width: 920 mm, total height: 940 mm, total length: 1,760 mm, door opening width: 670 mm, door opening height: 500 mm, scan area length: 175 mm, scan area width: 175 mm, travel distance Z-axis: 400 mm, table height: 710 mm, table length: 710 mm, table width: 400 mm, space requirement width: 920 mm, space requirement height: 940 mm, laser wavelength: 1,070 nm, space requirement length: 1,760 mm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, extraction nozzle diameter: 50 mm, working width: 175 mm, Equipment: cabin, Fiber Laser System for Professional Marking and Engraving of Metals and Plastics. Equipped with SK-LASER Workstation, Laser Class 1, and automatic lifting door. Laser Class 1 · CE · Made in Germany System & Lifting Door: - Complete system: IPG fiber laser + workstation + electric lifting door Process Sequence: - Start → Door closes → Laser process → Door opens automatically - Door opening approx. H 500 × W 670 mm - Access protection via safety control Laser – IPG (Made in Germany): - Power: 20 W Hnjdeyimpajpfx Akreu - Pulse energy: 1.0 mJ - Pulse duration: 100 ns - Frequency: 20–80 kHz - Wavelength: 1060–1070 nm - Beam quality M² < 1.2 - Air-cooled, < 400 W Optics & Scanner: - F-Theta lens f = 254 mm - Marking field 175 × 175 mm - Pilot laser + 2 distance lasers - Manually adjustable laser head (Y-axis) Control: - Windows 11 Pro, SSD, 23" monitor - Interfaces: Ethernet / USB / RS232 - SK CONTROL: texts, logos, QR codes, variable data, parameter management Workstation 1 – Laser Class 1: - Seated/standing workstation, aluminum housing - Work surface 710 × 400 mm, 25 mm hole grid - Dimensions 1760 × 920 × 940 mm Motorized Z-Axis (400 mm) - Extraction port DN50 - Safety (PL4) - Emergency stop - 2-channel interlock Safety relay - Rear service door (when open: Laser Class 4) Operation: 230 V / 50 Hz 15–35 °C Condition: - New machine - CE · Made in Germany

Condition: ready for operation (used), Year of construction: 2009, laser power: 20 W, Laser marking machine manufactured in 2009. This ELECTROX MaxBox Plus features a power supply of 110/220 V and an apparent power capacity of 1.25 kVA. If you are looking to get high-quality laser marking capabilities, consider the ELECTROX MaxBox Plus machine we have for sale. Contact us for further details. Hnsdoz E H E Sopfx Akreu - Power Supply: 110/220 V, 1 Phase, 50/60 Hz- Apparent Power / Capacity: 1.25 kVA

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,064 mm, workpiece weight (max.): 50 kg, input voltage: 115 V, type of input current: AC, laser power: 100 W, type of cooling: air, total width: 450 mm, total height: 853 mm, total length: 806 mm, working range: 150 mm, overall weight: 92 kg, warranty duration: 24 months, height adjustment type: electric, space requirement height: 1,080 mm, laser wavelength: 1,064 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, Equipment: cabin, The SpeedMarker 330 is the compact desktop laser from the SpeedMarker series, designed for users who want to laser mark small to medium-sized batches efficiently, reproducibly, and close to production. Unlike many standard workstations, the SpeedMarker 330 relies on clearly defined software workflows instead of complex machine configurations. As an industrial laser marking system, it combines galvo high-speed technology, a 100 W MOPA fiber laser (1064 nm), and the Ruby® laser software into a powerful production system that can be easily integrated into your workflow. The SpeedMarker 330 stands for standardized, controllable marking processes – without the complexity of customized systems. Key features: The SpeedMarker 330 Black Line combines advanced fiber laser technology with high marking speed, making it the ideal solution for industrial marking, traceability, and product customization. Its powerful 100 W laser source enables fast and precise marking on metals, plastics, and coated materials, thus maximizing productivity in demanding production environments. The intelligent autofocus technology automatically compensates for different component heights, reducing setup times while ensuring consistently high marking quality across various applications and batch sizes. Hsdpozcc Uzjfx Akrsnu The powerful galvo system offers exceptional speed and accuracy, producing sharp text, detailed graphics, barcodes, QR codes, and serial numbers with excellent repeatability and high contrast. The intuitive software for marking, with support for common industry-standard file formats and variable data, enables quick job setup, while real-time visualization and simulation help optimize workflows and avoid errors before production begins. Thanks to its compact, ergonomic design, the SpeedMarker 330 Black Line can be used as a standalone workstation or seamlessly integrated into automated production lines, offering flexibility, reliability, and efficiency for industrial marking applications.