Used Enveloping for sale (155)

Condition: ready for operation (used), Printing units: 2+1 flexo printing units, max. output with dextrin: 900 envelopes/min, paper weight: 70g/m²-120g/m². Formats: Book format min./max: 83x120mm/185x330mm, Diagonal format min./max: 83x120mm/185x265mm. On-site inspection is possible. Kedpfx Astq Ha Toabjdu

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: KK 0804, type of input current: three-phase, total width: 1,490 mm, total length: 8,000 mm, total height: 2,480 mm, input voltage: 400 V, compressed air connection: 6 bar, power of the servo motor: 1,400 W, overall weight: 2,560 kg, Fully specs: Versor SK 60K3 folder gluer machine Year: 2008 Kodpfxewzaczj Aabedu Board weight (solid cardboard): up to 800 g/m² Corrugated board types: N – F – E – G (micro‑flute) Power supply: 400 V, 60 Hz Installed power: 14 kW Pneumatic supply: 6 bar Compressed air consumption: Gluing (own oil‑free compressor): 2 m³/h Belt cleaning system: 14 m³/h Envelope gluing system: 14 m³/h Working speed / performance: 0–200 m/min Formats: Min 70 × 90 mm (optionally 45×70 mm) to max 550 × 600 mm Gluing: 1–3 point capability with KAS glue system C800 (up to 8 inputs glue-guns nozzles) / 3 Glue Guns in the set, spare parts included Automation features: Electronic speed counter, feeder, press control, and automatic speed regulation Dimensions and weight of the machine: Weight: 2 560 kg Dimensions (L × W × H): 8 000 × 1 490 × 2 480 mm Fully documentation, operation and service manuals In production Very good condition Available immediately

Condition: excellent (used), Year of construction: 2014, About the Machine The Sorter solution consists of a high speed processing system capable of the following: • Ergonomically designed manual induction prep section for 2-operators that will allow efficient processing: • 5,000 pieces per hour (pph) in barcode reading mode with a single operator. This mode does not require orientation of the product and will be used for the reject processing of parcels back into the Parcel Manager- (extreme pieces must be oriented). • 5000 pph for labeling and OCR mode with two operators. This mode requires the operator to orient and bring the product to the edge. • Automated product gapping with minimal skewing • In-motion weighing and dimensioning • Top read, full piece image, omni-directional camera solution with complimentary dual barcode reading and OCR address reading software • High speed linerless print and apply labeling system with stand. • Sorting, consisting of: • Multiple parcel sized outputs into 1 meter (39 in.) containers • Bin Confirmation sensors • Tray label printers • Overhead system displays for the operators The system is design to handle throughputs up to 5,000 pph. Parcel Specifications The system can handle various types of parcel products including but not limited to envelopes, corrugated boxes, polybags, cellophane covered boxes, soft packs, and vacuum-sealed products. The table below specifies the range of product for the Parcel Manager system. Feeding limitation includes high aspect ratio, the proportional relationship between its width and its height, pieces and pieces with significantly irregular surfaces. The product can be fed and processed in either portrait or landscape orientation. Below the specifications for packages that the Parcel Manager can handle. Parcel Specifications Kdedpfx Ajixz Iqeabju Length (distance along transport path) min. 150 mm (5.9 in.) max. 600 mm (23.6 in.) Width (distance perpendicular to transport path) min. 100 mm (3.9 in.) max. 300 mm (11.8 in.) Height/thickness (distance above transport bed) min. 5 mm (0.196 in.) max. 160 mm (6.3 in.) Weight min. 0.014 kg (0.03086 lb) max. 13.6 kg (30 lb)

Condition: excellent (used), Conveyor belt for envelope inserting system BB Total length: 2.5 m Width: 400 mm Belt width: 340 mm Ksdpfx Aew Nxxvoabodu

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Working Area Working envelope (X/Y/Z): 450 × 450 × 450 mm Maximum workpiece height: 700 mm Pallet size: 320 × 320 mm Maximum pallet/table load: 300 kg Spindle Number of spindles: 2 Tool spindle: 10,000 rpm, 95 Nm Speed extension: 18,000 rpm Tool interface: HSK 63 Feed Kdsdswx Er Nopfx Aabju Acceleration: 10 m/s² Rapid traverse: 60 m/min Chip-to-chip time: 2.6 s Tool Magazine Tool positions: 2 × 60 Tool magazine with 60 positions: included MACHINE DETAILS Weight Machine weight: approx. 14 t Control Control system: Siemens Sinumerik 840D EQUIPMENT Double-spindle, 4-axis horizontal machining center 4 machine pallets Renishaw probe Infrared receiver for probe, Renishaw model Vaf72a0p Operator panel at workpiece setup station Operator panel at tool setup station Workpiece setup stations manually rotatable Hydraulic workpiece clamping, 60 bar Pneumatic support control at workpiece setup stations Automatic swing door Extended coolant supply 70 bar / 1,500 l VF 250 coolant chiller Work area flushing Emulsion mist extraction Roto-Clear Automatic setup sequence Automatic teardown sequence Run-time and quantity recording Status lamp, 3 colors Modem for remote diagnostics Control cabinet lighting

Condition: like new (used), Year of construction: 2016, We have a Pitney Bowes DI500/DI600 envelope inserting machine available. Year is 2016 and this machine has two A4 document feeders and one bookletfeeder. It can process from DL up to C5 envelopes. Of course you can multiple feed more documents per feeder per envelope. the machine is in excellent configuration and state. The original counter is 7.025 envelopes processed. So like new!! Kjdpfsflrc Rox Aabedu

Condition: ready for operation (used), Year of construction: 1991, Envelopes (wallet): min.: 127mm/150mm, max.: 255mm/420mm, pockets: Center seam: min.: 228mm/127mm, max. 420mm/305mm, Side seam: min.: 228mm/127mm, max.: 420mm/262mm. Speed: 500 pockets/min, paper weight: 80g/m²-150g/m². Kedpfx Aotqnu Aoabodu

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine printed envelopes 2 colors Max. sheet size L 457 mm Max. sheet size W 324 mm Min. sheet size L 82 mm Min. sheet size W 108 mm Ksdpfx Aewqxgqjabjdu Max. print format L 457 mm Max. print format W 305 mm Capacity 60000 pcs/hr Highpile feeder unit Present manual digital display; including "Baldwin" circulator

Condition: reconditioned (used), Year of construction: 2012, functionality: fully functional, IRS Robotics® Refurbished Industrial Robot Kedpfx Aewku Htsabedu Supplied with our warranty. Brand: FANUC Model: M-10iA Controller: R-30iA Mate Payload: 10 kg Reach: 1420 mm Robot weight: 130 kg This compact yet powerful robot weighs only 130 kg but offers a 10 kg payload with the highest wrist moments and inertia in its class. Cable and airline management is significantly simplified thanks to a 50 mm hollow wrist and upper arm, reducing system costs and improving reliability. The M-10iA can be mounted on the floor or wall at any angle, or on the ceiling. The J3 axis can also flip over, enabling the robot to work behind itself and thereby creating a very large working envelope. Delivery time: By mutual agreement IRS Robotics® refurbished process: 77-Point Protocol – fully tested on our test benches, new oil/grease, new batteries, thoroughly cleaned, and painted in your preferred RAL colour. Includes Accuracy Status Measurements (repeatability, precision, backlash) About us: Our daily core business is the supply of refurbished A-Brand robots: ABB – KUKA – FANUC – YASKAWA. Established in 2002. We ship worldwide.

Condition: used, Friction feeder ST 1450 Formats: max. 330 x 279 mm / min. 95 x 63 mm Product thickness: max. 13 mm / min. 80 gsm Kjdpfxow Hry As Aabedu

Condition: as good as new (ex-display), Year of construction: 2014, operating hours: 200 h, functionality: fully functional, machine/vehicle number: MTP87UK-0320, number of ink cartridges: 4, total length: 5,020 mm, total width: 1,430 mm, total height: 1,920 mm, type of input current: AC, input voltage: 230 V, overall weight: 1,041 kg, energy consumption: 12 kWh, product width (max.): 330 mm, warranty duration: 1 months, Equipment: auto duplex, documentation/manual, raster image processor, DP8700 XL Specifications Kdedpor Eyx Rjfx Aabju - Largest format size..... 330 x 1,200 mm - Smallest format size..... 100 x 148 mm - Maximum print area ..... 318 x 1,180 mm - Output speed (sheets per hour) ..... 4,260 A4/Letter or 2,280 A3 pages/hour - Print resolu..... 95 to 270 lpi - up to 3600 dpi, 5 preset Stochastic modes - Substrates - Paper ..... 65 to 400 Gsm - Plastics ..... 100 to 400 micron - Envelopes ..... DL-C4 with or without windows - Three (2) input trays ..... 750 sheets per tray - High capacity loader .....000 sheet max capacity - High capacity stacker .....Up to 6,000 sheets - Bypass tray ..... 250 sheet capacity - Precise registration ..... +/- 0.2 mm - Auto duplexing from 2 trays ..... Up to 300 Gsm Workflow - Fiery Command Workstation RIP .....Ad obe PS3 - JDF Complient-Print queue management-Auto trap - ICC/ICM color management-Pantone certification with spot-on - Integrated automatic calibration with eye-one spectrodensitometer - Workstation ..... Intel Pentium Dual Core - Centralized job management -Flexible previews - Cohesive tool integration - Variable data NEWLEAF, PrintSoft, Seagull Scientific Bartender, InDesign, Print Shop Mail - Substrate library ..... Storable substrate values

Condition: used, Year of construction: 2011, functionality: fully functional, We have here a Plockmatic DMI4000 envelope inserter module available. Year 2011 and counter is just 311.014 Kdsdpfxswzam Ts Aabsu We do not have possible extra modules, like collating tower etc, which can be installed at this inserter module.

Condition: excellent (used), Epson G10-854SR Robot Assembly Station Dispensing Station The assembly station is divided into the following sub-stations: 3.1 Dispensing Area, 3.2 Assembly Area KK+SW, and 3.3 Assembly Area Front. (KK = heatsink, SW = front wall bracket) St.3.1: Dispensing Area - A workpiece carrier (WT) with mounted chassis and circuit boards is conveyed via the transfer belt into the dispensing area. - The WT is stopped at the lift-positioning unit (HuPo), raised off the belt, and secured in place - The X-Y-Z handling system moves the dispensing head to the designated position and initiates the dispensing process. - Once dosing is completed successfully, the handling system moves to the home position and the WT is placed back onto the conveyor - Transfer continues into the assembly area KK+SW (prerequisite: no WT in placement position) St.3.2: Assembly Area KK+SW - A WT transported from the dispensing area enters the KK+SW assembly area via the transfer belt. - It is stopped at the lift-positioning unit (HuPo), raised from the conveyor, and fixed in place; during this, the chassis side panels of the partially assembled component are aligned - Simultaneously, the positioning of the KK and SW tray is carried out - Both a KK tray stack (12) and a SW tray stack (12) are manually placed onto each respective infeed conveyor outside of the safety enclosure - The two safety shutters are opened and the loaded tray stacks are conveyed into the gripping position of their respective stackers - The safety shutters are then closed - The respective grippers pick up the corresponding tray - Using the Z-axis, trays are singled and transported upwards (above the actual pick-up height) - To center and stabilize the trays, a centering support is positioned beneath each tray using the X-handling system. - Using the stacker Z-axis, each tray is placed onto its centering support - The trays are now ready for component pick-up - The SCARA robot with a multi-gripper picks up the KK from the tray and places it in an intermediate alignment position (to compensate for inaccuracies in the pick-up and establish a fixed gripping point for assembly) - The KK is scanned, picked up again, and if the scanner result is OK, installed onto the WT - Non-OK KKs are placed in a non-OK container - The multi-gripper on the SCARA robot then picks up the SW from the tray and places it in the alignment position - The SW is picked up again and installed onto the WT - Continue with Assembly Area Front Technical Data Design: SCARA (4-axis robot) Payload: nominal 5 kg, maximum 10 kg Horizontal reach: 850 mm Vertical reach: Axis 3: 420 mm Rotational range: J4: +/- 360° Horizontal repeatability: +/- 0.025 mm Vertical repeatability: J3: +/- 0.01 mm Rotational repeatability: J4: +/- 0.005° Maximum work envelope: Axis 1: +/- 152°, Axis 2: +/- 152.5°, Axis 3: 420 mm, Axis 4: +/- 360° Kdjdoibx S Nepfx Aabsu Maximum operating speed: J1,J2: +/- 11,000 mm/s, J3: +/- 2,350 mm/s, J4: +/- 2,400°/s Permissible inertia: nominal 0.02 kg*m², maximum 0.25 kg*m² User cabling, electrical: 1x D-Sub 9 pin, 1x D-Sub 15 pin Z-axis: Outer diameter: 25 mm Press-in force: 250 N Weight: 48 kg Control: EPSON RC180 Mounting type: Ceiling IP protection class: IP20 Power and signal cables: 3 m Additional assembly modules in other sizes – new and used – can be found in our shop! International shipping costs on request.

Condition: used, Karten- und Warenprobenkleber - Card and Product Sample Adhesive Kolbus KI 224 ZU Baujahr / Year 2003 - Serial-No. 356009 For cards, envelopes, bags and booklets of the following formats: Für Karten, Umschläge, Taschen und Hefte in folgenden Formaten: Format / Size min. 40 x 60mm - max. 220 x 350mm Geschwindigkeit / put 18.000 Ex/h (depending on type, size and  properties of base and product up to) Heißleim Schmelzgerät / Hot Glue (commercial products) Nordon 3100V-3EA Aufbau, zum Anbau an der Zusammentragmaschine, Design / compat appliance for attachment to a collating machine Antrieb über Zahnriemen von der Hauptwelle zur ZU 840 / Drive toothed belt from main shaft to ZU 840 Steuerung: Elektronische, interaktive Mikroprozessor-basierte Steuerung mit Einstellung von Vorlaufzeit und Leimstreifenlänge /  Control: micro-processor based control unit with adjustment of lead-time and length of the glue  Ksdpjwqftksfx Aabsdu Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: new, Year of construction: 2022, X-BAG EVO Easy to handle. Easy to maintain, easy to set up. X-BAG evo is the ideal solution for those who need to quickly pack small quantities of material (fresh goods, small parts, spare parts, instruction manuals, small industrial components, etc.) in hermetic packaging with different formats and different types of film. Technical features Power supply V 220/240 Kdsdpfeuakmwjx Aabju Installed MAX power kW 0.5 Pneumatic supply bar 40lt/m up to 6 bar Production per hour p/h (pph) 0-1000 MAX Coil dimensions (diameter) mm 250 MAX Film spool dimensions (width) mm 360/410/520 - Film thickness micron 15/50 - Envelope length mm 50/330 (mm 580 with tape) - Envelope width mm 170/185/235 (depending on collar) - Processable film: PE, polyolefins, macroperforated, laminated, biodegradable film, Cartene) Horizontal sealing type with double sealing wire and cutting wire Machine dimensions mm 800x850x1500 Machine weight (net/gross) kg 130/165(MF99MB75) 135/170 (MF99MB76)

Condition: good (used), Year of construction: 2007, KERN 2500 inserting machines for handling C5 and C6/5 envelopes. The set consists of a complete working line and a second set of this type of machine for parts. Year of production: 2007 + set of machines for parts from 2004. List of modules: - automated input module (single A4 sheets) ensures efficient paper feeding. - control module reading, grouping and folding (Grouping and Folding Station – GUF). - 2 modules for adding leaflets, each equipped with 2 feeders. - inserting module - envelope feeder and sealer module with a panel for handling applications and settings. - final conveyor belt with containers for incorrect enveloping. Both sets were used in one company. The first set was installed in 2004 and the second in 2007. Kdjdpfxswfglws Aabju The machines were used until 2020, when the company purchased new machines. At that time, the machines were renovated using components from the second set. Since 2020, the renovated machines have been used sporadically and the second set of machines was used for parts. .

Condition: used, Year of construction: 2006, Year of manufacture: 2006 Condition: Very good condition Carton gluing machine suitable for producing: - Standard cartons with 1-3 gluing points from folding boxboard - Clamshell cartons with double fold - Mailing envelopes Materials used: - Folding boxboard 200-600 g/m² - E-flute corrugated board Configuration for standard cartons: - Timing feeder for folding heavy carton types (1 vibrator, 2 air blowers) - Power bridging shaft between feeder and pre-folding station - 3 intake rollers incl. mounting above the bridging station, for very wide products - Digital indicators for faster machine setup - Pre-folding station - Bottom gluing unit incl. applicator wheel (left side) - Folding station - Transfer station - Collection and pressing station - Electronic counter - Pneumatic marking device (compressed air required) - Speed: 400 m/min - Video camera for monitoring the transfer station (camera + monitor at the feeder) Kdjdpfx Aajww H S Uobeu - Additional device for producing auto-bottom cartons - 1 device for auto-bottom cartons - 1 soft rubber belt including guide parts and holders - 1 device for pre-breaking the third crease for auto-bottom cartons Additional equipment for other folding methods: - 1 device for folding clamshell cartons with double fold - 1 device for folding sleeves (CD sleeves) 120–380 mm Gluing unit: - 1 HHS gluing unit with holders for dispersion glue application from above - 2 application nozzles for top gluing - 4 controlled channels - 2 light barriers - 1 gluing station - 1 fill level sensor

Condition: used, Year of construction: 2012, We have a KAS C4 465 HS envelope inserting system, year 2012, available. Counter is 4.509.335. This envelope inserter can process DL up to C4 envelopes. C4 envelopes with the flap on the long side. Configuration: - Single sheet feeder Kdodpowqpipsfx Aabou - Folding feeder in-line - 3 insert feeders (bottom feed) - insert feeder in line - Envelope section - Conveyor belt We sell this machine as is or after complete maintenance

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: TX7_600195, total height: 22,500 mm, total length: 25,200 mm, total width: 15,500 mm, workpiece weight (max.): 25 kg, spindle speed (max.): 10,000 rpm, grinding wheel diameter: 202 mm, overall weight: 7,500 kg, grinding length: 400 mm, grinding spindle motor power: 37,000 W, power: 37 kW (50.31 HP), workpiece diameter (max.): 300 mm, disc diameter: 202 mm, 5-axis CNC tool and cutter grinder - available in used condition or fully rebuilt. Powerful and versatile machine with large working envelope and high spindle power for wide range of operations and requirements. Based on a rigid and stable polymer concrete bed (ANCAcrete), it comes with a 37kW direct driven spindle, 2-station wheel changer for up to eight wheels, automatic pallet loading (520 tools max, 15s loading time), mist extraction unit, steady bed and headstock dressing. Ideally suited for volume production of carbide and HSS cutting tools. !This offer is only available in Europe, Middle East and Africa! Kdsdpfoq Sud Rox Aabsu

Condition: used, Year of construction: 1998, machine/vehicle number: 24124, Kuvertiermaschine / Envelope Inserting Machine Bell + Howell Vitesse BH900 C5 Year 1998 Kjdpfx Aasupy Tasbsdu 6 Beilagenstationen / 6 Supplement stations Briefwender-Rollenauswurf / Letter turner-roll ejector verarbeitet Briefumschlagformat von C6 bis C5 / processes envelope format from C6 to C5 Geschwindigkeit mechanisch max. 10.000 Takte/Std. / Speed max. 10.000 cycle/h Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 500022, The Stratasys Objet500 Connex 3 is a state-of-the-art 3D printing solution that brings your creative ideas to life. With its advanced technology, it enables the precise production of complex and detailed models and prototypes. A standout feature of this impressive machine is its digital printing mode, which gives you even greater freedom in the design and realization of your projects. The technology of the Stratasys Objet500 Connex 3 is based on the PolyJet process, which delivers high-precision results with exceptional surface quality. It is possible to print models with a layer thickness of 30 µm or 16 µm. This gives you the choice between maximum resolution or maximum speed. In both modes, PolyJet technology allows you to print intricate models with fine details With an increased build envelope of 490 x 390 x 200 mm, the Objet500 Connex 3 allows you to create an even greater number of complex and detailed models in a single print session, saving time and effort. The operation of the Stratasys Objet500 Connex 3 is simple and user-friendly. With the free GrabCAD software, you can easily prepare your models and monitor the printing process. Solid photopolymers in the colors white, black, grey, blue and transparent in 3.6 kg cartridges are available as model materials. The machine can also print flexible and dental model materials. Six material trays are installed and the machine automatically switches from an empty to a full cartridge. This enables even longer unattended printing. With the Connex series' digital print mode, you can also produce complex multi-component and multi-material models. You have the freedom to combine different materials, colors and shore hardnesses in a single model. In the case of the Objet500 Connex 3, you can mix three different model materials. The printer works with the gel-like SUP705 support material. A WaterJet wash-out station is recommended to dissolve this optimally. We can offer you this together with the printer. This printer is part of the Certified Pre-Owned (CPO) program Certified Pre-Owned 3D printers are used 3D printers that have been refurbished and serviced by our experts and then verified by a 24-hour test print. In the case of Objet24, however, we also have some new machines in stock. Maintenance contracts and other services We offer optimum advice before, during and after the purchase. In addition to our services such as on-site installation and training for your team, we also offer the supply of accessories, spare parts and materials. Sign a maintenance contract with us and benefit from full planning and cost certainty, fast response times and minimized machine downtimes. Kodpfx Aaerridhobsdu This means you take no risk with your purchase. If you do not yet know exactly which 3D printing system is right for you, we will be happy to advise you and answer any questions you may have about 3D printing. Request an individual quote today.

Condition: used, Year of construction: 2005, Year: 2005 Condition: functional Configuration: Master: - 5 stations - envelope machine - trimmer - Robusto unloader - counter: 17.498 h Kdodpfxoww Etdj Aabeu Slave: - 6 stations - envelope - machine - trimmer - Robusto unloader - counter - 18.486 h - lift for signatures and a station for attaching attachments Both lines can run separately or as a set

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 270047, Year of construction: 2015, operating hours: 1,514 h, The Stratasys Objet260 Connex 3 is a state-of-the-art 3D printing solution that brings your creative ideas to life. With its advanced technology, it enables the precise production of complex and detailed models and prototypes. A standout feature of this impressive machine is its digital printing mode, which gives you even greater freedom in the design and realization of your projects. The technology of the Stratasys Objet260 Connex 3 is based on the PolyJet process, which delivers high-precision results with exceptional surface quality. It is possible to print models with a layer thickness of 30 µm or 16 µm. This gives you the choice between maximum resolution or maximum speed. In both modes, PolyJet technology allows you to print intricate models with fine details. With a build envelope of 255 x 252 x 200 mm, the Objet260 Connex 3 allows you to create a variety of complex and detailed models in a single print session, saving time and effort. The operation of the Stratasys Objet260 Connex 3 is simple and user-friendly. With the free GrabCAD software, you can easily prepare your models and monitor the printing process. Solid photopolymers in the colors white, black, grey, blue and transparent in 3.6 kg cartridges are available as model materials. The machine can also print flexible and dental model materials. Six material trays are installed and the machine automatically switches from an empty to a full cartridge. This enables even longer unattended printing. With the Connex series' digital print mode, you can also produce complex multi-component and multi-material models. You have the freedom to combine different materials, colors and shore hardnesses in a single model. In the case of the Objet260 Connex 3, you can mix three different model materials. The printer works with the gel-like SUP705 support material. A WaterJet wash-out station is recommended to dissolve this optimally. We can offer you this together with the printer. Kjdpfxjrrh S Tj Aabedu The Stratasys Objet260 Connex 3 can be installed anywhere and does not require any special installation conditions. For detailed information, please refer to the site preparation guide. This printer is part of the Certified Pre-Owned (CPO) program Certified Pre-Owned 3D printers are used 3D printers that have been refurbished and serviced by our experts and then verified by a 24-hour test print. In the case of Objet24, however, we also have some new machines in stock. We offer optimum advice before, during and after the purchase. In addition to our services such as on-site installation and training of your team, we also offer the supply of accessories, spare parts and materials. Sign a maintenance contract with us and benefit from full planning and cost certainty, fast response times and minimized machine downtimes, so you take no risks with your purchase. If you are not yet sure which 3D printing system is right for you, we will be happy to advise you and answer any questions you may have about 3D printing. Request an individual offer today.

Condition: refurbished (used), functionality: fully functional, Year of construction: 2014, operating hours: 6,105 h, The Fortus 450mc 3D printer is a powerful and user-configurable workhorse, ideal for creating functional prototypes, manufacturing tools and production parts. The build envelope of the Fortus 450mc from Stratasys measures 406 x 355 x 406 mm and therefore covers a wide range of 3D printed parts. The selectable layer thicknesses of 0.127mm, 0.178mm, 0.254mm and 0.330mm also allow perfect adjustment options for your component. To be able to operate this Stratasys 3D printer optimally, you need a wash-out station. The Stratasys Fortus 400mc works with soluble support material SR30, or with a break-away support, to display even more models and even enable undercuts and drill holes in 3D printing, thus saving post-processing steps. The Fortus 400mc FDM 3D printer works with the popular, free GrabCAD software, which enables even inexperienced users to produce their projects quickly and easily. Use the iSQUARED materials ABS, ABS-ESD, ABS-CF, ASA, PC-ABS, PC, ULTEM 9085 and ULTEM 1010 with this Stratasys FDM 3D printer model. The cassettes for construction and support material each contain 1510 cm³ or 3020 cm³. Kdedpfxevmm Ico Aabeu This printer can be installed anywhere and does not require any special installation conditions. No special ventilation is required as the Fortus systems produce no harmful fumes, chemicals or waste. Download the site preparation guide to see the space and connection requirements of the Stratasys Fortus 450mc. This printer is part of the Certified Pre-Owned (CPO) program Certified Pre-Owned 3D printers are pre-owned 3D printers that have been refurbished and serviced by our experts and then verified by a 24-hour test print. Maintenance contracts and other services We offer optimal advice before, during and after the purchase. In addition to our services such as on-site installation and training for your team, we also offer the supply of accessories, spare parts and materials. Sign a maintenance contract with us and benefit from full planning and cost certainty, fast response times and minimized machine downtimes. This means you take no risk with your purchase.

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: D01427, Year of construction: 2017, operating hours: 7,300 h, Introducing the Stratasys F170™, a powerful 3D printer that prioritizes reliability and ease of use. With its state-of-the-art FDM® technology and seamless integration with design-to-print GrabCAD, the F170 simplifies the 3D printing process for experienced professionals and beginners alike. The F170 offers convenient plug-and-play functionality that allows you to start printing immediately without having to go through complex setup procedures. Automatic calibration ensures accurate print results and saves valuable time. Changing print media is quick and easy, giving you the flexibility to choose the right media for your projects. With a generous build envelope of 254 x 254 x 254 mm, the F170 allows you to print a variety of parts in different sizes. Customizable layer thicknesses of 0.127, 0.178, 0.254 and 0.330 give you the ability to adjust the print quality to suit your requirements - from fine details to faster print times. The F170 is characterized by reliable and precise printing performance, giving you consistent results. Thanks to its quiet operation and low odor emissions, it is ideal for use in offices or educational institutions. The Stratasys F170 comes with the advanced GrabCAD software, which enables seamless transfer of your 3D models and offers easy project management. In addition, a comprehensive range of accessories and consumables are available to meet your printing needs. Expand your 3D printing capabilities with the Stratasys F170 and discover the limitless creative possibilities offered by this reliable and easy-to-use 3D printer. Boost your productivity and realize your design visions with ease and precision. The Stratasys F170 - your reliable partner for professional 3D printing. This printer is part of the Certified Pre-Owned (CPO) program Certified Pre-Owned 3D printers are used 3D printers that have been refurbished and serviced by our experts and then verified by a 24-hour test print. Maintenance contracts and other services We offer optimal advice before, during and after the purchase. In addition to our services such as on-site installation and training for your team, we also offer the supply of accessories, spare parts and materials. Sign a maintenance contract with us and benefit from full planning and cost certainty, fast response times and minimized machine downtimes. This means you take no risk with your purchase. If you are not yet sure which 3D printing system is right for you, we will be happy to advise you and answer any questions you may have about 3D printing - request a personalized quote today. Kdodjrrf Tdjpfx Aabsu