Used Enveloping for sale (166)

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 975 h, load capacity: 454 kg, empty load weight: 7,241 kg, construction height: 2,510 mm, fuel type: diesel, total length: 7,370 mm, drive type: Diesel, arm reach: 11,020 mm, construction width: 2,490 mm, working height: 15,560 mm, Telescopic boom lift Iedpfx Aijzrcf Reyjbb Condition: Operational and fully functional Technical condition: Normal Front tire type: Pneumatic Rear tire type: Pneumatic Description: MACHINE IN GOOD CONDITION - PHOTOS ARE EXAMPLE IMAGES OF A NEW UNIT - HOURS ORIGINAL - FIRST OWNER FROM RENTAL FLEET Permanently active oscillating axle system and traction control for excellent off-road capability Chassis tilt sensor extends access to hard-to-reach work sites Robust 1.52 m jib Two load capacity zones: 300 kg (unrestricted) and 454 kg (restricted) for lifting heavier loads and up to three people Automatic working envelope monitoring for consistent outreach On-site zero-load calibration and integrated diagnostics system for improved serviceability

Year of construction: 2008, condition: excellent (used), Bizerba CWL Eco flex continuous scale with Sick VMS520 volume measuring system Bizerba CWL Eco flex continuous scale Dynamic weight detection with volume determination The CWL Eco flex can be integrated almost effortlessly into existing parcel shipping, sortation systems and feeding lines. Bizerba WM-CWL flex Conveyor scale Model: CWL Eco in Motion DE-09-MI006-PTB018 Max 60 kg Ijdpfx Aemgax Usiyobb Min 0,4 kg 230 V Sick VMS520 Volume Measuring System Special features - Non-contact, active measuring method - Measurement of length, width and height of cuboid objects - Measure length, width and height of objects with almost any shape - Works with a wide range of surface structures and on various flat conveyor systems - Flexible system configurations - Calculation of the small enveloping cuboid (box volume) - Calculation of real volume Device components Sick VMD520-2000 Volume measuring device Sick CLV 490 Stationary barcode scanner Year of manufacture: 2008 Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our store! International shipping costs on request!

Condition: excellent (used), Balestrini NOVA 3 envelope tenoning machine Main motors 2 x 2.2 kW Diameter of spindles 25 mm Iodpfxsvkcfro Aiysbb Spindles length 70 mm Spigot diameter 2 x 100 mm Automatic material loading and discharge Workpiece length min/max 199.5 mm / 2030 mm Thickness of workpieces 100 mm Width 90 mm

Condition: used, Year of construction: 2010, machine/vehicle number: LC601, Technical Specifications & Performance DataThis complete PET hot-fill bottling line is a high-efficiency used bottling line engineered for juice applications. Built primarily in 2010 with downstream equipment from 2011, it delivers consistent production at 24,000 bottles per hour (bph). The line integrates blowing, hot-fill filling, capping, labeling, secondary packaging, and palletizing, providing a cohesive solution for beverage production and industrial packaging needs.Production speed: 24,000 bphPrimary application: Hot-fill juiceContainer handling: PET bottlesValidated format example: 0.5L, 0.3L, 1.5LNeck mesurment: 28mmManufacturing years: 2010 (core equipment), 2011 (palletizer)Core components: Krones blow molder; CFT hot-fill filler-capper; DASE-SING labeling machine; DIMAC shrink wrapper; TCP bottle cooler and sterilizers (models T30R, TU170RD); TBC palletizer (model LT400)Line type: Blow, fill, cap, label, wrap, and palletizeConfiguration: Integrated continuous production with matched throughput across stationsAdvanced Automation & Control SystemsThe line is designed for synchronized operation from container production to end-of-line packaging. Coordinated controls help maintain stable performance at high speeds and reduce bottlenecks across blowing, filling, labeling, and packaging stations. Operator interfaces facilitate routine adjustments and monitoring, while safety interlocks and guarding support reliable operation in a production environment.Centralized line control with coordinated drives for consistent throughputOperator-friendly interfaces for speed matching and format adjustmentsSafety guarding and interlocked access doorsEmergency stop circuitry across critical stationsQuick-change features to support format and product adjustmentsProduction Line Integration CapabilitiesThis second hand bottling equipment set is engineered to function as a complete packaging line for PET juice, from bottle blowing through palletizing. It can integrate with upstream utilities and downstream warehouse systems. Format changes are supported to align with market requirements, with confirmed capability on 0.5L PET and suitability for similar cylindrical PET formats.Inline operation from blow molding to palletizingCompatible with PET cylindrical bottle formats; validated at 0.5L, 0.3L, 1.5L Hot-fill processing designed for juice productsEnd-of-line shrink wrapping and palletizing for stable distribution packsPotential to adapt speeds and formats within the design envelope of each componentMachine Condition & Maintenance HistoryThe line is currently in production, reflecting regular operational use suitable for immediate deployment after relocation. Component years indicate modern engineering with durable construction standards expected from the listed manufacturers. It is a used bottling line that has been maintained in an industrial beverage environment.Operational status: I... Ijdpfx Aozgtpvsiyobb

Condition: reconditioned (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: IRB6650S-125/3.5 IRC5, overall weight: 2,250 kg, load capacity: 125 kg, arm reach: 3,500 mm, controller manufacturer: ABB, controller model: IRC5, teach pendant manufacturer: ABB, Equipment: documentation/manual, IRS Robotics® Refurbished industrial robot. 100% complete and fully functional: robot arm, controller, all cabling and teach pendant. Includes our warranty and a detailed 77-Point Protocol evaluation performed by our in-house robotics engineers. The IRB 6650S is the shelf model from the Power Robot family, offering a unique working envelope. It is capable of full vertical and horizontal stroke, with increased forward and downward reach. Brand: ABB Type: IRB6650S-125/3.5 Controller: IRC5 Ibodjywxf Tjpfx Aiysb Payload: 125 kg Reach: 3.5 m IRS Robotics® refurbished: 77-Point Protocol – fully tested on our test benches, new oil/grease, new batteries, fully cleaned, painted in your desired RAL colour. Includes Accuracy Status Measurements (repeatability, accuracy, backlash) About: Our trusted daily business is the supply of refurbished A-Brand robots: ABB – KUKA – YASKAWA. Established 2002. Worldwide shipping.

Condition: used, functionality: fully functional, ShowRange SRFD2600 Digital Ultrasonic Flaw Detector Set. The rugged SRFD2600 is designed for the severe environment. Its domestically unique omniseal design enables it to resist the damp, sandstorm, dust, and pollution in all sorts of environmental extremes ranging from ocean to desert. The full screen function enables the echo wave displaying area to cover the entire screen so that the operator will have the maximal view. The solid waveform :add the waveform visual contrast and omission will hardly happen during the fast testing. The bulk memory can store up to 1000 data sets,including waveforms, curves,and parameters(including the traditional 1000 channels) Through echo wave-echo wave thickness measurement:the zero calibration can be avoided, and the net thickness of the base material can be directly measured through the coating. Wave Crest Memory: the real-time envelope can display the highest wave of the flaw and record the maximum value of the flaw to help the exact positioning and fast testing of the flaw as well as the qualitative analysis by the envelope waveform. Automatic Gain: automatically adjust the gain to the pre-set amplitude height. Warning Function: afferent echo/lost wave alarm Real-time Clock: automatically record the date and time of the stored waveform. Display Freeze: catching the waveform and the sound path data at any moment and removing the hatch after freezing to measure the echo wave parameters. Flaw Positioning: real time displaying sound path S, horizontal height X, depthY, and wave height H. Ibsdpottrc Ajfx Aiyjb Good working condition. Please check out our other listings as well.

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 60,000 kg, wheel width: 4,300 mm, feed length X-axis: 2,200 mm, feed length Y-axis: 2,500 mm, feed length Z-axis: 1,500 mm, position of the milling head: 0,02, table diameter: 3,500 mm, feed rate X-axis: 10 m/min, feed rate Z-axis: 6 m/min, total length: 6,000 mm, wheel diameter: 4,300 mm, total height: 7,000 mm, total width: 5,000 mm, workpiece diameter (max.): 4,300 mm, milling spindle length: 2,500 mm, type of input current: three-phase, milling length: 2,500 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 1 rpm, Vertical Turning and Milling Lathe VL 40 CNC Turning Center’s Specifications Nominal Turning Envelope Faceplate Diameter 3.500 mm Machining Diameter: -maximum -minimum 4.000 mm 0 mm Swing diameter 4.000 mm Machining Heights 2.000 mm Work Piece Weight 60,000 kg Nominal Turning Travels X - Axis Ram Carriage From -100 mm To 2.250 mm + ATC travel Z - Axis Ram 1.500 mm Work Table WorkTable Diameter 3.500 mm Normal face plate with T-slots Work Table Speed: -for machining 1 - 110 rpm Power Continuous S1/ S6 57/75 kW Torque Continuous S1 / S6 70,000 / 90.000 Nm Turning main drive mechanism Gear box reducer and belt transmission, C axis drive Work Table Milling Speed 0.02 to 2 rpm Milling Torque Continuous S1 43,000 Nm Locking Table Torque (hydraulic double side devices) 60,000 Nm Z - Axis Ram Turning & Milling Ram Ram Size 300 x 300 mm Tool shank size: Shank 32*32 / 40*40 mm automated tool clamping Ram Speed 0 to 2.500 rpm Power Continuous S1 22 kW Torque Continuous S1 1.400 Nm Driving mechanism ZF gearbox, two stages, belt transmission ZF gearbox and main spindle bearing sets are supplied with coolant systems, individually for each. Tool taper BT 50 DIN 69871 / automated tool clamping Tool Storage Number Of Tool Magazines two ATC -one for left side, 20 turning/milling/drilling stations -one for right side 20 milling/drilling and part probe Tool Storage 20 + 20 ATC turning capabilities: Maximum Singular Tool Weight – turning toolholder Maximum Singular Tool Weight – milling/drilling toolholder Total Tool Weight Iedpsy Dfraefx Aiysbb Maximum tool size – turning Maximum tool size – milling Maximum tool size - drilling Maximum length 50 kg 25 kg 600 kg 250 x 150 mm Dia. 300 mm Dia. 120 mm 600 mm Axes Drives X and U - Axes Ram Carriage Power Continuous S1 5.5 kW Thrust Continuous S1 40,000 N Z-Axis Ram Power Continuous S1 5.5 kW Thrust Continuous S1 40,000 N Power Continuous S1 11 kW Axes Rates X And Z - Axes Feed Rates 0.02 to 6,000 mm/min X And Z -Axes Rapid Rates 10,000 mm/min Coolant System Coolant Tank Capacity 2.000 L Coolant Pressure / Flow Rate: -internal coolant (turning) -internal coolant (milling) / pressure adjustments steps Filtration unit: -type 6 bar at 100 LPM 30 bar at 60 LPM Cartridge type Chips conveyor Conveyor type Hinged , frontal placed

Condition: good (used), machine/vehicle number: 087222, Horizon Perfect Binder BQ-260, 1 station, hotmelt glue, envelope feeder, machine number 087222, in good condition, immediately available. If interested, we are happy to provide information on further machines available at our facility. Isdpfoxdh Etex Aiyebb You are welcome to view the machine at our premises by appointment.

Condition: reconditioned (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: M-710iC/50 R-30iB, overall weight: 560 kg, load capacity: 50 kg, arm reach: 2,050 mm, controller manufacturer: Fanuc, controller model: R-30iB, teach pendant manufacturer: Fanuc, Equipment: documentation/manual, IRS Robotics® Refurbished industrial robot. 100% complete and fully functional: robot arm, controller, all cabling and teach pendant. Includes our warranty and a detailed 77-Point Protocol evaluation performed by our in-house robotics engineers. Brand: FANUC Type: M-710iC/50 Controller: R-30iB General purpose: wide motion multi-purpose robot known for its agility and large work envelope. Payload: 50 kg Reach: 2050 mm Robot mass: 560 kg Delivery time: In mutual agreement IRS Robotics® refurbished: 77-Point Protocol – fully tested on our test benches, new oil/grease, new batteries, fully cleaned, painted in your desired RAL colour. Includes Accuracy Status Measurements (repeatability, accuracy, backlash) About: Our daily trustful business is delivery of refurbished A-Brand robots: ABB – KUKA – FANUC – YASKAWA. Iedpfsx Tr Nwjx Aiyobb Est. 2002. We ship worldwide.

Year of construction: 1995, condition: used, machine/vehicle number: ref. BM4933, Ref. BM4933 top machine! This machine puts inserts into envelopes Inserter stations (2) safety features double-/missing sheet detection air suckers feed from bottom of pile Ibsdpfx Aobzlzxjiyeb envelope counter Insert dims 156x244 to 84x114mm envelope dims max 156x244mm min 89x171mm working speed up to 10.000 envelopes/hr variable speed adjustement

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: M-710iC/45M R-30iB, load capacity: 45 kg, arm reach: 2,606 mm, controller manufacturer: Fanuc, controller model: R-30iB, teach pendant manufacturer: Fanuc, Equipment: documentation/manual, IRS Robotics® Refurbished industrial robot. 100% complete and fully functional: robot arm, controller, all cabling and teach pendant. Includes our warranty and a detailed 77-Point Protocol evaluation performed by our in-house robotics engineers. Ibedsx Hindjpfx Aiyob Brand: FANUC Type: M-710iC/45M Controller: R-30iB General purpose: wide motion multi-purpose robot known for its agility and large work envelope. Payload: 45 kg Reach: 2606 mm Robot mass: 570 kg Delivery time: Upon mutual agreement IRS Robotics® refurbished: 77-Point Protocol – fully tested on our test benches, new oil/grease, new batteries, fully cleaned, painted in your desired RAL colour. Includes Accuracy Status Measurements (repeatability, accuracy, backlash) About us: Our daily business is the reliable delivery of refurbished A-Brand robots: ABB – KUKA – YASKAWA. Established 2002. We ship worldwide.

Condition: used, Kuvertiermaschine / Enveleope Inserter machine Neopost DS-63 Kuvertiermaschine / Enveleope Inserter machine - Neopost DS-63 Serial-No. 13FN1525 Zuführungen Dokumente 2 Ibedpeyzn Ewofx Aiysb Taktleistung max. 2200 Briefe/h Anlagekapazität A4 650 Anlagekapazität Kuverts 150 Papierformat / Paper Size A4 - A5 - A6 Höhe / High 90 - 356mm Breite / Width 130 - 230mm Papierqualität 60 - 170g/m2 Papierstärke 250 g/m2 Umschlagformate / Envelope Sizes DIN-Fomrate C5 - C6 - DL Höhe / High 90   - 162mm Breite / Width 160 - 248mm Kuvertqualität / Enveleope Quality 80   - 120g/m² Füllgutdicke / Envelope thickness max. 2.5mm Maschinen Stellfläche / Machine Size 1200 x 420 x 520mm Gewicht / Weight 75kg Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: as good as new (ex-display), Year of construction: 2015, We have a Xante Impressia digital printing system available. The Xante Impressia printing system is specially built for printing envelopes! System can also print documents of course ranging up to A3 and 300 gr/m2! This Xante Impressia just came in. Year is 2015 and counters are 317.152 color and 19.901 prints black. but the printer is in good working condition. Of course all the drums and toners are in the machine. This is part of the printer. Isdpfed Tfiujx Aiyebb Please contact us to get a hold of this machine for a super discount price!

Year of construction: 2014, condition: excellent (used), Automatic Postbox traying system for envelope inserting systems. This SIMA 220 was connected to a Buhrs BB700 inserting systems, therefore it is blue. Installed in 2015 and just in use for 16 months! More pictures available on request! Description: Adjustable in height 600 mm up to 900 mm. Gathering section – with buffer for post boxen Automatic fillingstation for postboxes Automatic change of postboxes. Max 10 Postboxen can be in feeder Touchscreen – simple, and user-friendly user interface Complete with connection from envelope inserter - connection with all inserters possible! Format max.: 180mm x 285mm Format min.: 90mm x 145mm Speed: up to 20.000 envelopes per hour Envelope thickness max.: 8 mm Postbox change-over time: ca. 1,8 sec (max 2000 boxes per hour) Post boxes: Deutsche Post, Postcon, Schweizer Post, Oesterreichische Post, Belgische Post, Hollaendische Post, USPS Trays, Pin Boxen. Electrical connection: 16A, 400/230V, 4kW Pressure air: 6bar, 200l/min Connection: To all inserting systems possible Iedpfx Asd Etadsiyobb The sima Automatic Mail Delivery lines up with any inserter and automates the presorting and letter tray preparation processes. The delivery checks for open flaps, non-readable addresses, and IMB Barcodes then automatically rejects any letter that should not be delivered. Various reading systems are available for the sima, from simple print mark readers up to a server based OCR/IMB reading system connected to the Digital Front End. Our patented collection unit safely stacks the envelopes individually- without contacting each othermaking twisting or interleaving almost impossible. The envelope stack is quickly pressed before filling the letter trays in accordance with USPS regulations (DMM). The exchange of letter trays occurs automatically with an exchange speed of up to 1,800 boxes/h (2.0 sec). The tray exchange unit can handle MM and EMM letter trays. A unique feature is its ability to intermix one and two foot letter trays depending to the presorting need. As an option, a postcode label printer can be integrated into the sima, which applies a tray label to the letter tray. The filled letter trays are temporarily stored on a large buffer section. The Sequence Repair System (SRS), which marks or separates mails that do not belong to the actual mail sequence, comes standard on this machine. The sima can instruct the operator what to do with the marked or separated mail. This SRS enables a constant production speed even when sequence problems ap

Condition: used, This listing is for a Pall Allegro 200 L Single‑Use Mixer System. The unit is in full working condition and is ready for immediate release. The Pall Allegro 200 L single‑use mixer (model LGRMXTTE200L230B) is engineered for scalable, robust mixing in biopharmaceutical operations. It is part of Pall’s Allegro single‑use technology portfolio and is designed for applications from media and buffer preparation through final formulation. Ibsdpfxoxl Dxlo Aiysb Built with proven engineering principles and compatibility with Pall’s Allegro biocontainer film formats, it offers ease-of-use, reproducible performance, and minimal validation burden. Key Features 4‑Pitch Blade Impeller – Effective, low-shear mixing over a broad range of conditions. Bidirectional Flow Capability – Able to run clockwise (up‑flow) or counterclockwise (down‑flow), accommodating different density fluids and solids. Bag Inflation System – Mixer bag inflation provides a controlled mixing envelope, allowing consistent performance across 50–200 L volumes, and supports gas blanketing. Flush Drain Valve – Helps avoid dead legs by removing settled materials that might otherwise be left unagitated. Retention of Allegro Film Materials – Uses the same film as standard Allegro 2D/3D biocontainers for material consistency, reducing requalification effort. Optional Baffle Kit – To mitigate air entrapment at higher rotational speeds for shear-sensitive processes. Technical Specifications Parameter Value Model / Part Number LGRMXTTE200L230B Operating Volume Range 50 – 200 L Voltage / Frequency 230 V AC, 50 Hz Current Draw ~5.1 A Motor Power 0.37 kW Rotation Speed Range 50 – 200 rpm Materials of Construction Mixer tote in 304 stainless steel; film, manifolds, ports in LDPE / PS / silicone etc. Weight (empty system) ~120 kg Footprint (W × D) 1,054 mm × 748 mm Height 1,378 mm Gas Supply Requirements 4 – 6 barg (for bag inflation / blanket) Operating Temperature Range 4 – 40 °C Connections / Ports Inlet, gas inflation, exhaust, flush drain, powder addition ports etc. Applications Upstream Media Preparation – Efficient mixing of culture media and supplements. Downstream Buffer Preparation – Rapid homogenization of buffers or reagents. Final Formulation / Filling – Gentle mixing for drug products. Powder Addition / Reconstitution – Capable of handling solid-liquid mixing (e.g. powders) with repeatability. Shear-Sensitive Biologics – Low shear impeller design suitable for sensitive proteins or biologics. Benefits & Validation High Performance Mixing across Conditions – Demonstrated capability to mix a wide range of systems including liquid-liquid, solid-liquid, and viscous solutions with good speed and uniformity. Validated Materials & Safety – Components meet USP /, USP , , endotoxin limits, gamma-irradiation compatibility (up to 50 kGy), and leak-tested containers. Reduced Validation Overhead – Using the same film materials as existing Allegro biocontainers helps streamline requalification and process transfer. Minimal Dead Volume / Entrapment – Flush drain valve and optional baffles help prevent accumulation of settled solids. Scalable & Flexible – Supports operations from 50 L to 200 L with consistent mixing performance.

Condition: excellent (used), Year of construction: 2016, machine/vehicle number: UMF00631, Speed: prints Up to 70 p / m. Counter: Print Total: 1‘618‘150 Equipment / Additional information: - Envelope printing - Stapling Ibedjxzg Diepfx Aiysb - 2 or 4 hole punching - Folding - Three-knife trimmer - Scanning Printing method: color laser printing Print resolution: 2,400 x 2,400 dpi Max. Paper capacity: 7,650 sheets (A4 / A3) Max. Output capacity: 11,200 sheets (A4, 80 g / m²) Possible formats: Paper cassettes 1, 2 and 3: Standard formats: A4, A4R, A5R, A3, SRA3, maximum 330 x 483 mm Multi-purpose tray: Standard formats: A4, A4R, A5R, A3, SRA3, maximum 330 x 483 mm Envelopes: No.10 (COM10), Monarch, ISO-C5, DL Possible grammages: Standard cassettes: 52 to 220 g / m² Multi Purpose Tray / Optional Paper Trays: 52 to 300 g / m² Double-sided printing: 52 to 300 g / m² Very good condition / Totally revised 3 months ago (approx. 9000 CHF)

Condition: reconditioned (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: M-10iA R-30iA Mate, load capacity: 10 kg, arm reach: 1,420 mm, controller manufacturer: Fanuc, controller model: R-30iA, teach pendant manufacturer: Fanuc, IRS Robotics® Refurbished Industrial Robot. 100% complete and fully functional: robot arm, controller, all cabling, and teach pendant. Includes our warranty and a detailed 77-point inspection protocol performed by our in-house robotics engineers. Brand: FANUC Model: M-10iA Controller: R-30iA Mate Payload: 10 kg Reach: 1420 mm Robot mass: 130 kg This compact yet powerful robot weighs only 130 kg, but offers a 10 kg payload with the highest wrist moments and inertia in its class. Cable and airline dress-out and routing are greatly simplified thanks to the 50mm hollow wrist and upper arm, reducing system costs and enhancing reliability. The M-10iA can be installed on the floor, wall (at any angle), or ceiling. The J3 axis can flip over, enabling the robot to operate behind itself and thus greatly expanding its work envelope. Delivery time: To be agreed upon mutually. IRS Robotics® Refurbished: - 77-Point Protocol: fully tested on our test benches, new oil/grease, new batteries, thoroughly cleaned, painted in your preferred RAL colour. - Includes accuracy status measurements (repeatability, accuracy, backlash). Ibjdpewku Htjfx Aiyjb About us: Our daily business is the reliable supply of refurbished premium-brand robots: ABB – KUKA – FANUC – YASKAWA. Established 2002. Worldwide shipping.

Condition: used, Year of construction: 1998, functionality: fully functional, The SERIA 2 head dosing machine is an essential tool for the food industry seeking to improve efficiency and dosing precision. Thanks to its advanced design with a double-jacketed cube and lobe pump, it guarantees consistent, even dosing of delicate products. In fact, this machine adapts easily to liquids, semi-liquids and pastes, offering maximum flexibility to meet a wide range of production requirements. What's more, the SERIA 2 head stands out for its ability to handle two production flows simultaneously, optimizing overall productivity. What's more, its integrated anti-drip valve minimizes product loss and maintains a clean working environment, avoiding frequent interruptions for cleaning. As a result, production line efficiency is significantly improved. Iodpfx Aisu Ibaysyebb What's more, the ergonomic design of this filler makes it easy to use, facilitating operators' tasks. With its reliability and ability to maintain high quality standards, the SERIA 2 head filler is the perfect choice for any company looking to optimize its packaging process. Technical specifications: Double-envelope cube Lobe pump 2 heads Non-drip valve

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: 3130055185, with Freeflow Printserver and Clear Toner Counter (m): 7.3 Colors: 4 + varnishes Format : A7 – A3+ (SRA3) Equipment / Additional information: Image Resolution: 2400 x 2400 dpi VCSEL ROS Productivity/Print Speeds—AWM • 80/100 ppm (8.5" x 11"/A4 letter), all weights 55–350 gsm (15 lb Bond to 130 lb Cover) • 4800/6000 full process color A4 (letter) 4/0 impressions per hour • 44/50 ppm (11" x 17"/A3–12" x 18"/SRA3), all weights 55–350 gsm (15 lb Bond to 130 lb Cover) • 2400/3000 (11" x 17"/A3–12" x 18"/SRA3 tabloid) 4/0 impressions per hour and 4800/6800 (8.5" x 11"/A4) IMP Paper Format/Sizes • Maximum Sheet Size: 13" x 19.2" (330 x 488 mm) • Minimum Sheet Size: 7.2" x 7.2" (182 x 182 mm), tray inserter kit supports for 4" x 6" (102 mm x 152 mm); see Optional High Capacity Feeder • Maximum Print Area: 12.83" x 19.05" (326 mm x 484 mm) • Maximum Print Image Assurance: 12.48" x 19.05" (317 mm x 484 mm) Machine can staple, punch, fold & front cut Complete machine with software & RIP Brochures, flyers, business cards Envelopes can also be printed Various spare materials: Contains 1 bottle Blaue, 1x yellow, 1x blue, 1x red 1x Kit Beet Assy – FSR Module IEC 1x Chamonix Waste Tonner Bottle 2x Tonner Waste Container 10x Cartridge M 006R01472 Ibsdsh Nvm Djpfx Aiyob 3x Cartridge C 006R01471 4x Cartridge K 006R01470 2x Cartridge Y 006R01473 7x Staple Cartridges 008R12925 1x Belt Assy-IBT 064K93191 8x Fuser Belt Assembly 1x Chamonix Deutemle 1x MM Assy-1 5x Copy Cartridge 4x Chamonix Corotion Assy

Condition: like new (used), Frama Inserting Machine, Type DI380 Iodpfxsyir Hts Aiyobb Processes 3000 pieces/hour (folding and inserting) Folding types: C-fold, Z-fold, single-fold, double-fold Sealing: Yes Paper input capacity: 325 Insert input capacity: 100 Envelope input capacity: 100

Condition: reconditioned (used), Year of construction: 2020, machine/vehicle number: W20-0648-01, functionality: fully functional, Kiekens mobile dust extractor, type: DMF1258M-B1Z22, number: DM1200000, year of construction: 2020, 400 V, 3 Ph, 50 Hz, 16 A, 2.2 kW, weight: 330 kg, dimensions: 800 mm x 950 mm x 2100 mm, serial number W20-0648-01. The dust extractor was completely cleaned and checked. Dustmaster 1200 The Kiekens Dustmaster DM1200 series is designed to quickly and effectively extract (fine) dust. Ibsdpfovccc Iex Aiysb By applying the Kiekens K-series modular concept, the Kiekens Dustmaster DM1200 series can be widely used. The DM 1258 is designed for a variety of extraction processes, in either fixed, centralised or mobile applications, for: ƒ grinding / milling / polishing ƒ sandblasting / sanding , cutting / routing, ƒ packaging / mixing ƒ welding. ■ Extraction of powders, chips and fumes including: ƒ metals ƒ plastics / synthetics ƒ food / pharmaceutical ƒ rubber / leather ƒ wood ƒ others ■ A 2m or 3m extraction arm for variable extraction movement is optional. Principle of operation and benefits: The dust-loaded air enters the Dustmaster through the Ø160mm inlet via a hose or extraction arm (optional upon request). o The elbow arrests dust movement, and the tangential inlet causes a cyclonic effect to enhance the separation of the dust from the air stream. p The heavier dust particles are separated from the air stream and collected in the oversized 120 litre dust container. The large volume enhances dust settlement and allows longer operations. q The air streams upwards towards the powerful 2.2 kW industrial fan, which produces high suction performance. r The lighter dust particles are collected on the large high efficiency M class 5.8 m2 envelope (or 8.8 m2 cartridge) filter, with DM 1258M (ENVELOPE FILTER) ƒ Heavy-duty polyester needle felt (PNF) with Teflon coating, envelope-type filter design ƒ High efficiency, M class. Motor starter with phase indication lamp ƒ Filter monitoring pressure gauge; Filter cleaning handle for DM 1258 (motorised option available) High capacity 120 litres dust container provides high dust handling capacity. ƒ Castors for easy movement ƒ Detachable with simple release lever ƒ Special versions for the explosion zones 2 (gas) and 22 (dust) are available. Other zones and earthed options on request. Disposable bags can be used to line the container For the Romanian companies, there is the possibility of financing leasing in instalments with a minimum of 40-50% down payment. Price 4.200 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Änderungen und Zwischenverkauf vorbehalten /Subject to errors, changes and prior sale /Ne rezervăm dreptul la greșeli, modificări și vânzare. We speak English. /Wir sprechen Deutsch. / Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: reconditioned (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: M-10iA/6L R-30iA, load capacity: 6 kg, arm reach: 1,632 mm, controller manufacturer: Fanuc, controller model: R-30iA, teach pendant manufacturer: Fanuc, IRS Robotics® Refurbished industrial robot. 100% complete and fully functional: robot arm, controller, all cabling and teach pendant. Includes our warranty and a detailed 77-Point Protocol evaluation performed by our in-house robotics engineers. Brand: FANUC Model: M-10iA/6L Controller: R-30iA Payload: 6 kg Reach: 1632 mm Robot weight: 135 kg This compact but powerful robot weighs only 135 kg while providing a 6 kg payload, extended reach, and leading wrist moments and inertia in its class. Cable and airline management is greatly simplified by a 50 mm hollow wrist and upper arm design, reducing system costs and enhancing reliability. The M-10iA can be installed on the floor, wall (at any angle), or ceiling. Joint 3 can flip over, allowing the robot to operate behind itself and increasing the effective work envelope. Iodsx Thwkepfx Aiyebb Delivery time: By mutual agreement. IRS Robotics® Refurbished: 77-Point Protocol — thoroughly tested on our in-house test benches, fresh oil/grease, new batteries, professionally cleaned, and painted in your desired RAL color. Includes accuracy status measurements (repeatability, precision, backlash). About us: Our daily reliable business is the supply of refurbished A-Brand industrial robots: ABB, KUKA, FANUC, YASKAWA. Established in 2002. We ship worldwide.

Condition: ready for operation (used), Year of construction: 2001, spindle motor power: 15,000 W, spindle speed (max.): 3,500 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 250 mm, overall weight: 10,800 kg, number of axes: 9, This 9-axis Muratec MT 25 MY was manufactured in 2001. It features a maximum machining diameter of 370 mm and a maximum machining length of 920 mm. The machine is equipped with twin spindles and twin turrets, offering 15 live tooling stations per turret. If you are looking to get high-quality turning capabilities, consider the Muratec MT 25 MY turn-mill centre we have for sale. Contact us for further details. • Configuration: Twin spindle / twin turret / twin Y-axis (9 controlled axes) • Control unit: Fanuc CNC (motors, servos, electronics) • Condition: Currently in operation; immediate delivery • Travels: • X1: 230 mm • X2: 230 mm • Z1: 250 mm Ijdey Shwhepfx Aiyobb • Z2: 700 mm • Y: 100 mm (±50 mm) • Z3 (sub-spindle): 750 mm • Capacity & envelope: • Max machining diameter: 370 mm • Max machining length: 920 mm • Bar capacity: 67 mm • Rapid traverse (X/Z): 20 / 25 m/min • Spindles (twin, identical): • Spindle nose: A2-6 • Torque: 420 N·m • Workpiece transfer: Automatic transfer between spindles with torque control • Turrets & tooling capability: • Turrets: 2 (both with Y-axis & C-axis) • Stations: 15 per turret (all live/driven) • Live tooling speed: 3,000 rpm • Live tooling motor: 4 kW • Indexing time: 0.2 s • Build & features: • Guideways: Solid box ways (prismatic) on all axes • Cleaning: Automatic air/coolant blast for sub-spindle cleaning • Monitoring: Load control system and tool wear monitor Additional equipment • Gantry loader: High-speed 3-axis gantry robot, 8 kg capacity (automatic loading/unloading) • Bar feeder: 1.5 m CNC bar loader • Parts catcher: Automatic swing-arm for small finished parts • Parts conveyor: Integrated conveyor belt for finished components • Sampling compartment: Independent area for in-process inspection • Chip conveyor: Rear-exit hinge-type chip conveyor • Workholding: 2 × Kitagawa 250 mm hydraulic chucks • Tooling included: Complete set of static holders (OD/ID) and live holders (axial/radial) Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, We are pleased to offer you the following machine, subject to its availability: PETRATTO METRO SD 78 - 2007 Equipment: • FEEDER SECTION: o Friction feeder for thicker paper o Flat pile feeder for thinner paper (envelopes, etc.) • Metro 78 FOLDING AND GLUING UNIT - Metro transport system with 4 programmable outputs - Small plough folder, left and right Ibsdpjy Eda Sefx Aiyob - Large plough folder, left and right - Folding buckle plate - Folding buckle plate for thinner papers - Turning device - Stream belt delivery with pressure roller • Double-sided adhesive tape applicators x 3 Refurbished, with new rollers, bearings, and belts AVAILABLE: IMMEDIATELY LOCATION: Belgrade, Serbia Installed in Belgrade, Serbia. Testing possible.

Year of construction: 2014, condition: excellent (used), Automatic Postbox traying system for envelope inserting systems. This SIMA 220 was connected to a Buhrs BB700 inserting systems, therefore it is blue. Installed in 2015 and just in use for 16 months! More pictures available on request! Description: Adjustable in height 600 mm up to 900 mm. Gathering section – with buffer for post boxen Automatic fillingstation for postboxes Automatic change of postboxes. Max 10 Postboxen can be in feeder Touchscreen – simple, and user-friendly user interface Complete with connection from envelope inserter - connection with all inserters possible! Format max.: 180mm x 285mm Format min.: 90mm x 145mm Speed: up to 20.000 envelopes per hour Envelope thickness max.: 8 mm Postbox change-over time: ca. 1,8 sec (max 2000 boxes per hour) Ibedpjd Etagefx Aiyeb Post boxes: Deutsche Post, Postcon, Schweizer Post, Oesterreichische Post, Belgische Post, Hollaendische Post, USPS Trays, Pin Boxen. Electrical connection: 16A, 400/230V, 4kW Pressure air: 6bar, 200l/min Connection: To all inserting systems possible The sima Automatic Mail Delivery lines up with any inserter and automates the presorting and letter tray preparation processes. The delivery checks for open flaps, non-readable addresses, and IMB Barcodes then automatically rejects any letter that should not be delivered. Various reading systems are available for the sima, from simple print mark readers up to a server based OCR/IMB reading system connected to the Digital Front End. Our patented collection unit safely stacks the envelopes individually- without contacting each othermaking twisting or interleaving almost impossible. The envelope stack is quickly pressed before filling the letter trays in accordance with USPS regulations (DMM). The exchange of letter trays occurs automatically with an exchange speed of up to 1,800 boxes/h (2.0 sec). The tray exchange unit can handle MM and EMM letter trays. A unique feature is its ability to intermix one and two foot letter trays depending to the presorting need. As an option, a postcode label printer can be integrated into the sima, which applies a tray label to the letter tray. The filled letter trays are temporarily stored on a large buffer section. The Sequence Repair System (SRS), which marks or separates mails that do not belong to the actual mail sequence, comes standard on this machine. The sima can instruct the operator what to do with the marked or separated mail. This SRS enables a constant production speed even when sequence problems ap