Used Evaporator for sale (351)

Condition: used, Year of construction: 2013, Model: UTAH Year of manufacture: 2013 Fgodpfx Aajqrpd So Nsb Cooling capacity: 14,4 kW Dimensions: 1305 x 700 x 345 mm Weight: 66 kg.

Condition: used, Year of construction: 2017, functionality: fully functional, overall weight: 350 kg, total length: 4,638 mm, total height: 532 mm, total width: 1,628 mm, lamellar spacing: 7 mm, operating pressure: 10 bar, power: 24.5 kW (33.31 HP), pressure: 10 bar, Alfa Laval Arctigo ID Evaporator / Unit Cooler – 4× EC Fans (3-Phase) – 2017 – 2 units available / price per unit. Short Description: Industrial air cooler / evaporator, dual discharge, blow-through design, fully functional. Equipped with 4 EC fans (ZIEHL-ABEGG), electric defrost, copper/aluminum coil, suitable for brine applications. Technical Specifications Parameter Value Model IDB24-28-CU-W10-AL7.0-2H Serial Number 3289109271 Application Medium Brine / glycol solution Coil Material Copper / Aluminum Number of Coil Rows 8 Fin Spacing 7.0 mm Max Working Pressure 10 bar Test Pressure 14 bar Coil Temperature Range −60 °C to +110 °C Recommended Room Temp −40 °C to +20 °C (typical application) Fans 4× EC, 3-phase, 400 V AC, 50–60 Hz, ZIEHL-ABEGG Max Fan Power 24.5 kW Protection / IP IP54 ICC 10 kA Electric Defrost Tubular heaters installed Condensate Drain 1½" Weight (approx.) 350 kg Dimensions (L×W×H) 4638 × 1628 × 532 mm Mounting Points M1, M2: 2000 mm Cooling Capacity Dependent on operating conditions (air & brine/glycol temperature, flow rate). Suitable for industrial refrigeration / freezer applications. Condition Fully functional; coil and fins in good condition Minor cosmetic oxidation on copper pipes (normal) Sold as used equipment Documentation Wiring diagram / electrical documentation: Drawing No. 9460151524 Manual and technical datasheet available on request Location / Pickup Prostějov, Czech Republic Loading / shipping can be arranged Fodpfoywctujx Aa Nogb

Condition: used, Year of construction: 2021, controller manufacturer: Siemens, controller model: Simatic, _____ Description: Year of manuf. : 2021 Fgodpfxoy E Ebwj Aa Nob Technical Data: Capacity (max.):2.500 l/h

Condition: used, Two-side evaporator Goedhart -Type: DVS-p-82637 -Cooling capacity: approx. 43 kW -Fin spinning: 7 mm -Fans: 2 x 630 mm -Dimensions: 2600 x 1820 x 750 mm -Volume: 76 L Fgodoy Ifb Nspfx Aa Njb -Weight: 470 kg -Quantity in stock: 1 -Reference number: CH 604 -Condition: Used in good condition, evaporator 100% tight, fans working, ready to work

Condition: used, Item: A-9600-GEA-APV-Evaporator Used Evaporator Fgsdpfx Aaevi Raze Neb Price by GEA & APV (SPX) Capacity 7.000 L & 12.000 L Dismantled, moved to stock

Year of construction: 2005, condition: excellent (used), functionality: fully functional, Hettich CombiDancer Infrared Vortex-Evaporator with PoleStar Cold-Trap System (2005) For sale is a complete Hettich CombiDancer high-speed evaporation system (Hettich AG, Switzerland) — a premium parallel evaporator for rapid, gentle, and reproducible solvent evaporation, from light volatile ethers to high-boiling solvents such as DMF and DMSO. Decommissioned from a chemistry laboratory in fully functional condition with no known faults. Formally decontaminated (written certificate included). Never used in a biological or isotope environment. Highlights • Complete, ready-to-run system: CombiDancer + PoleStar cold-trap + diaphragm pump + rotary vane pump • 3–10× faster than conventional rotary evaporators; no sample balancing, no rotating parts in the chamber • Accepts large tubes, HPLC vials, Falcon tubes (15/50 ml), Eppendorf tubes, scintillation vials, microtiter/deep-well plates • Three independent heating zones (halogen IR, compartment heater, heated shaker plate) • PoleStar freezes solvents to –45 °C; rotary vane pump reaches 0.01 mbar for high-boiling solvents • Original paper manuals (CombiDancer & PoleStar) included Fgsdpfx Ajy Nmi Roa Njb CombiDancer Specs • Vacuum chamber: V4A stainless steel, Ø 360 × 180 mm • Vortex: 200–1,000 rpm • Temp: 20–80 °C • Vacuum: DN25 • Gas fittings: 2× 6 mm Swagelok • RS232 (VP, CT, PC) • 230 VAC / 1,800 VA • 765/930 × 695 × 470 mm / 78 kg PoleStar Cold-Trap Specs • Capacity: 3.3 L • Cooling: –45 °C • Vacuum: 0.01 mbar • Vessel: aluminium FEP-coated • Coil: V4A stainless steel • 230 VAC / 660 VA • 520 × 430 × 530 mm / ~45 kg Pumps Included • Vacuubrand PC2003 VARIO + CVC 2000 controller (oil-free diaphragm, auto vapor sensing) • Vacuubrand RZ 6 (rotary vane, deep vacuum) Scope of Delivery • CombiDancer unit • PoleStar cold-trap • both vacuum pumps • mobile cart • original manuals • decontamination certificate Typical Applications • Analytical chemistry / SPE • combinatorial chemistry / HTS • pharma R&D • natural product & botanical extract workflows • food, cosmetics & life sciences

Condition: used, Evaporator GEA KUBA -Type: SGB 63-F62 -Cooling capacity: 33.3 kW at DT8, 26.6 kW at DT7 -Fin spinning: 7 mm -We have 10 pcs with electric heaters and 7 pcs without heaters -Fans: 2 x 630 mm -Dimensions: 3020 x 850 x 1000 mm -Refrigerant: Freon -Volume: 45 L -Quantity in stock: 17 -Stock number: CH 599 Fodpjy Endzefx Aa Njgb -Condition: Used in very good condition, evaporator 100% tight, fans working, ready to work

Condition: good (used), We are offering used evaporative coolers for sale. TECHNICAL DETAILS Manufacturer: Portacool Model: Pachr360 Fully functional Condition: used PRICE €2,350.00 net €2,796.50 gross incl. VAT Fgsdoy Eqduepfx Aa Njb Stock quantity: 12 units YOUR CONTACT PERSONS AT OUR COMPANY: Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & INSTALLATION We are happy to assist you with the transport and installation of the equipment. This item can be collected on site. Delivery or shipping is available at an extra charge. Additional costs depend on the delivery location and the volume of the shipment and can be provided upon request. PROJECT PLANNING Our sales team will be happy to provide you with a non-binding, customised offer tailored to your requirements. TRANSPORT & INSTALLATION We are happy to assist you with the transport and installation of the equipment. TERMS OF PAYMENT Payment terms are to be agreed in the event of an order. The price is quoted per unit/net price or as specified in the description (plus VAT). You will of course receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, deals in new and used products from the fields of warehouse logistics, materials handling, mezzanine floors, textile warehouses, as well as machinery for trade, industry and crafts. We always offer a wide range of attractive used equipment from various manufacturers/brands at competitive prices. If you have any questions, please feel free to contact us. Four is the winning formula – The success factors of DLK – Storage Technology | Levelmaker® | Logistics | Solutions

Condition: used, Evaporator Goedhart -Type: VNS 65407 E -Cooling capacity: 27 kW at -8°C -Fin spinning: 7 mm -Electric defrost Fgjdpfx Aasyybd Dj Nob -Fans: 5 x 400 mm -Dimensions: 4200 x 800 x 600 mm -Volume: 44 L -Weight: 310 kg -Quantity in stock: 10 -Reference number: CH 598 -Condition: Used in very good condition, evaporator 100% tight, fans working, ready to work

Condition: used, Evaporator GEA KUBA -Type: SGBE 63-F62 -Cooling capacity: 33.3 kW at DT8, 26.6 kW at DT7 -Fin spinning: 7 mm -Electric heating -Fans: 2 x 630 mm -Dimensions: 3020 x 1000 x 1000 mm -Block made of stainless steel -Refrigerant: Freon Fgjdpfxoyx S Eve Aa Nob -Volume: 45 L -Quantity in stock: 1 -Stock number: CH 597 -Condition: Used in very good condition, evaporator 100% tight, fans working, ready to work

Condition: used, Goedhart NH3 R717 evaporator for sale. Dimension L x W x H ( 2100mm x 900mm x 2700mm ) Located Locally in Hungary (EU). Fodpfx Aaoywzt Ho Nogb There are 2 of them. The price is for one piece.

Condition: like new (used), Year of construction: 2017, functionality: unexamined, type of input current: AC, Double stage vakuum evaporator. Stainless steel, heat exchanger plates with cleaning brushes. For input dry solids contents up to approximately 10%. Volume flow 1-5m3/h. Heat absorption capacity, depending on the medium, 200-400kWth. Dimensions: 6000x4800x4500mm. The systems are stored and can be inspected and tested on-site if required. Fsdpfsw N N I Isx Aa Nsgb

Year of construction: 2024, condition: new, functionality: fully functional, Electric vaporizer Capable of vaporizing liquefied gas at any temperature. We utilize these units to vaporize liquid CO2 and store it in concrete. It can also be used for other applications, such as vaporizing nitrogen, oxygen, or other gases for use in end processes. New price 140,000 CHF. Fgedpox H R Ryjfx Aa Njb

Condition: used, Two-side evaporator Goedhart Fgsdpfx Aasyttc Dj Njb -Type: FC38Dp 453-7-230 -Cooling capacity: 25 kW at DT8 -Fin spinning: 7 mm -Fans: 3 x 450 mmm -Dimensions: 2850 x 1050 x 470 mm -Place for electric defrost -Volume: 32 L -Weight: 260 kg -Refrigeration: Freon -Quantity in stock: 7 -Reference number: CH 596 -Condition: Used in good condition, evaporator 100% tight under nitrogen, fans working, ready to work

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Equipment: compressor, Manufacturer: GEA Fjdpoyvrwtefx Aa Nogb Year of manufacture: 2012 Model: 2 MVR 1 Feed rate: 35,000 l/h with whey Evaporation capacity: up to 25,000 kg/h Type: MVR evaporator with TVR finisher (High-)concentrator: from 20 up to 60% DS Including pasteurizer via steam injection MVR compressor: PILLER MVR compressor power: 456 kW Steam consumption finisher: ~900 kg/h Steam consumption pasteurizer: 900 - 1,700 kg/h

Condition: good (used), Year of construction: 1985, functionality: fully functional, Equipment: compressor, Manufacturer: GEA / Laguilharre Year of construction: ~1985 4 stages – 6 tube bundles MVR + TVR evaporator Use as a pre-concentrator from 6 to 32% DS Use as (high) concentrator 9 to 50% DS Feed rate: 20,000 l/h whey Evaporation performance: 15,000 l/h Fgjdpfeyvrtusx Aa Nob Including pasteurizer with steam injection Electrical power of MVR compressor: 140 kW TVR steam consumption: 850 to 1,000 kg/h Pasteurizer: 300 kg/h

Condition: used, Year of construction: 2018, Overview  This vacuum evaporator was manufactured in 2018 by Italian manufacturer REDA. The machine is designed for gentle concentration of musts, juices, and other liquid products at low temperatures to preserve aromas and product quality. It is almost new and offered for sale as it was intended for a project that did not proceed. The system features an automated, CIP‑ready design. Technical data  Capacity: 100 L/h evaporation capacity at +22/+24 °C Application: Concentration of musts, juices, and liquid products Operating modes: Recirculation mode or direct concentration mode Max. concentration: 55–70 °Brix Daily output: 2,400 L evaporated / 24,000 L enriched to 10% Utilities: Electrical supply: 25 kW, 380 V / 3Ph / 50 Hz + PE Water: +12/+18 °C (low consumption) Compressed air: 6–8 bar Connections: DN40 DIN, 50 mm hoses Control system: PLC automation, IP65 control cabinet, digital temperature indicators Scope of Delivery  Vacuum evaporator | REDA | CM100 | 2018 | Complete AISI stainless-steel construction Evaporation chamber | Stainless steel, full inspection access Heat exchanger | AISI 316L tubular exchanger Vacuum pump | Liquid-ring system with cooling recirculation Refrigeration group | Heating 75,000 kcal/h, cooling 60,000 frig/h, 2 × 12.5 HP Copeland compressors Pumps | Stainless-steel centrifugal and mono volumetric discharge pump Vapor condenser | Stainless-steel surface condenser Instrumentation & tanks | Flowmeters, cold and hot water stainless-steel accumulation tanks Fodpjykrdbefx Aa Njgb

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, temperature: 35 °C, operating pressure: 75 bar, energy consumption: 64 kWh, Industrial plant for the treatment and concentration of process water as well as for nutrient recovery. The plant combines a double-pass reverse osmosis (RO) system with a thermal evaporator unit and was originally developed for biogas production to recover ammonium-containing fertilizer from process water and digestate. The plant was never commissioned due to the operator's insolvency and is in a preserved condition. The system is suitable for operators from the industrial, environmental technology, or agricultural sectors who are looking for a rapidly available solution for water treatment, ZLD (Zero Liquid Discharge), or nutrient recovery. Technical data System type: RO Double Pass + Evaporator Model: SIMPEC RO Double Pass 8000 44 8 Evaporator 57 000 Year of construction: 2020 Permeate output: Fgsdpfx Aaeyr H Ans Nsb Stage 1: 7.5 m³/h Stage 2: 6.7 m³/h Permeate quality:

Condition: good (used), Year of construction: 2012, functionality: fully functional, total length: 1,750 mm, total height: 550 mm, total width: 900 mm, volume flow: 5.86 m³/h, cooling capacity: 21.5 kW (29.23 HP), water connection: 35 mm, pressure: 16 bar, 2 fans evaporator Güntner GGHN 040.2H/27-ANW50 wall/ceiling air cooler year of manufacture: 2012 2x fan VT0398U power: 21.5kw Fjdpfx Ast Tf A Ija Nogb volume flow: 4.6m3/h air volume flow: 5860m3/h throw distance without streamer: 12m volume: 20.8lit. max/min pressure: 16 bar/-1bar max/min temperature: 100°C/50°C test pressure: 17.6bar sizes length: 175 cm width: 90 cm height: 55 cm

Condition: used, Used Pfaudler Balfour approximately 4.64 m2 stainless steel wiped film evaporator. Evaporator body approximately 700mm diameter X 2100mm straight side. Internal 1460 litre capacity rated full vacuum/1 bar design pressure at 0-160 °C. Jacket 250 litre capacity rated full vacuum/6 bar (5 bar with full vacuum) design pressure at 0-160 °C. Rotor belt driven by 5.5 kw 415 volt 3/50 1440 rpm motor via Flender model ZF80A gearbox rated 10.29/1 reduction ratio. Fjdsyh Na Eopfx Aa Njgb

Condition: new, Air Cooler, Evaporative Cooler, Indoor Cooling Unit, Used Appliance Manufacturer: Govers Type: ET8 Fgodpfoqvmzfjx Aa Nob Year: 2004 Dimensions: 2260 x 830 x 260 mm In manufacturer's packaging, new device.

Condition: good (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: P281560766/3, power: 2.35 kW (3.20 HP), Single outlet roof top air coolers in good condition including their fans. AVAILABLE the following codes : DEA 093DL-DEB 081D-DEB 094DL-DEBE 072D-DEBE 081D-DEBE 082D-DPA 032S-DPA 041S-DPA 042S-DPA 043S Fgodoul U Auspfx Aa Njb The posted price is per piece.

Condition: good (used), BAC S1500E Cooling Tower The BAC S15E 1018-10-LE is a high-performance open cooling tower from the Baltimore Aircoil Company's (BAC) S1500E series. This specific model is designed for industrial cooling applications and large-scale air conditioning (HVAC) systems where high efficiency and ease of maintenance are paramount. Technology Patented BACross III packing system that allows for easy inspection of the fins to prevent biological growth (e.g., Legionella). Key Features of the S1500E Series Maintenance Access: A large, inward-swinging access hatch and internal maintenance platforms allow technicians to comfortably perform inspections while standing inside the unit. Hygiene Control: The design minimizes standing water and protects against sunlight with special air inlet elements, reducing algae growth. Flexibility: Thanks to its single-sided air inlet, the cooling tower can be installed even in confined spaces or directly against walls. Materials: Galvanized steel with Baltibond hybrid coating. Typical Applications Industrial Cooling: Used in factories for process cooling. HVAC (Human-Ventilated Air Conditioning): Used in large building complexes as part of the central refrigeration system. Refrigeration Technology: As a condenser in commercial refrigeration circuits. Technical Specifications Airflow: 60.0 m³/s Fan Motor: (3x) 11.0 kW Liquid Inlet: ND (1x) 250 mm Liquid Outlet: ND (1x) 300 mm Number of Fans: 3 Weight: 11,446 kg Overall Dimensions: L x W x H 3,000 x 5,600 x 6,500 mm Due to its size, the unit has two sections; the upper section alone has a height of 2,562 mm. Disassembly and removal by the buyer. Disassembly Service: Professional disassembly can be carried out by our specialized assembly team upon request (€5,000 net). Item Location: 3650 Dilsen-Stokkem, Belgium "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Find more refrigeration systems – new and used – in our shop! International shipping costs available upon request! Fgodpfsynkbmjx Aa Nsb

Condition: like new (used), Year of construction: 2017, functionality: fully functional, We are offering this as-new REDA CM/200 vacuum evaporator, year of manufacture 2017. Fedpsydfg Nefx Aa Nsgb Manufacturer: REDA S.p.A. Model: CM/200 Serial number: 4142.031 200-054A Year of manufacture: 2017 Machine type: Vacuum evaporator Condition: As new If you have any questions or need further information, please feel free to contact us.

Year of construction: 2008, condition: like new (used), We sell a package of 26 cooling systems - Alfa Laval brand evaporators, all of which work on the glycol cooling system. The systems are powered at 220V or 380V or have an interchangeable power supply system according to the user's needs. The year of manufacture of the systems is 2008. We can sell also piece by piece not only as a package upon request. Commercial unit coolers designed for use in small and medium cold rooms from 10 up to 400 m³. Models designed for easy maintenance with immediate access to inspection areas. This series is available as a DX evaporator and brine unit cooler. Finned coil - H(C)FC Inner grooved Cu tubing ø 12 mm, triangular tube pitch - Brine Smooth Cu tubing ø 12 mm, triangular tube pitch - Corrugated Alu-fins - Fin spacings 4, 5.5, 6, 7, 8, 10 and 11 mm. • 1 to 4 AC fans, ø 250 mm up to ø 500 mm, drawing through the coil. Fan motors 230V/50-60Hz/1ph or 400V/50-60Hz/3ph in two noise levels (H/L). Motors with dynamically and statically balanced external rotors, manufactured in accordance with VDE 0530/12.84. • Corrosion resistant materials: coil frame AluZinc, casing strong and durable sheet metal, powder-coated RAL 9002. Fgodpog N Db Hefx Aa Nsb • Hinged drip tray and side covers for easy installation and maintenance. • Sufficient space for mounting of expansion valve inside the casing. • Mounting brackets allow flush ceiling mounting. • Fitted with schräder valve on the suction connection for testing purposes. • Pumped system available on request. • Stickers indicate fan direction and refrigerant in/out. • Delivery in mounting position. Coolers are mounted on wooden beams. Installation can take place with the use of a forklift. 1 AlfaCubic series (BL, GL, RL) 2 Refrigerant system (E = dry expansion, W=water/glycol, 3 Noise level (H=high, L=low) 4 Fan diameter (25=250, 35=350, 40=400, 50=500 mm) 5 Number of fans (1 to 4) 6 No. of tube rows (A=4, B=6, C=8) 7 Phases (S= single-phase, D= 3 phases Δ connection) 8 Motor voltage (230V, 400V) 9 No. of circuits 10 Packing (CR=crate) 11 Casing material (AP= powder coated, SS= stainless steel) 12 Defrost system (A= air, E= electric defrost, HG= hotgas) 13 Fin material/coating (AL=aluminium, EP= epoxy coated aluminium) 14 Fin spacing (4, 5.5, 6, 7, 8, 10 and 11 mm) 15 Tube material (Cu=copper) The evaporator coils of these units are high performance and are built-in 1/2 ”fluted copper tube and fin corrugated aluminium with gaps of 3.5, 6 and 8mm. The frame, made of aluminium sheet, is provided with protection collars. This frame has the application of thermostatic expansion valves. Regarding their exterior structure, they are manufactured in aluminium painted in high resistance RAL-9018 polyester colour. The vibrations in these machines are avoided thanks to the fact that their entire structure is compact and highly rigid. All its parts are easily removable for maintenance. These evaporators are fitted as standard with helical fans with high-performance protection grilles and are equipped with 315 or 350mm motors. diameter. Single-phase for 230V 50Hz, with a degree of protection IP-54, with external rotor and low consumption. All motors are connected to a watertight general box, according to IP-55 regulations. Finally, defrosting is carried out with 230V electric heaters built in armoured stainless steel tubes. Its vulcanized ends avoid derivations and are inserted inside the battery and the tray. They are connected to a watertight junction box. Application: Lo