Used Excentric Press for sale (12,168)

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Quantity: 4 units Machine type: Mechanical stamping presses Manufacturer: Predominantly Berg & Schmid (?) Bdjdpfx Ane Adu Ekodoi MACHINE DETAILS Dimensions Length: 300 mm Width: 200 mm Height: 300 mm Weight Weight: 20 kg

Condition: used, Year of construction: 1981, pressure 030 t throat 250 mm stroke 100 mm table-size 500 x 400 mm max. distance table - ram 320 mm ram surface 350 x 220 mm hole in the table 130 x 100 mm total power requirement 5,5 kW Bdodpfx Ans Ad Rlmedei weight of the machine ca. 2 t dimensions of the machine ca. 1,8 x 1,6 x 2,5 m Fabricated construction with light guard and two hand switch.

Condition: excellent (used), Year of construction: 1959, functionality: fully functional, pressing force: 400 t, stroke length: 450 mm, table width: 2,050 mm, table length: 1,500 mm, Weingarten OK 400.21.45 Press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2023. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Weingarten OK 400.21.45press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2023. Bjdpsv E Rm Hsfx Andodi New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: used, Year of construction: 1985, machine/vehicle number: ARP-250, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 250 t, stroke length: 125 mm, total length: 2,500 mm, total width: 3,000 mm, total height: 4,500 mm, overall weight: 25,000 kg, Single-column (C-frame) eccentric press Ivo Lola Ribar ARP-250, 2,500 kN, for sale. The press has been completely overhauled, is regularly maintained, is in very good mechanical and functional condition, and is ready for immediate operation. Inspection under power is possible by appointment. Technical data (as per nameplate): Nominal force: 2,500 kN (250 t) Stroke: 40–190 mm, adjustable Ram adjustment: 125 mm Strokes per minute: 40 min⁻¹ Max. sheet thickness: 24 mm Distance table–ram (stroke down): 300–425 mm at 190 mm stroke, 375–500 mm at 40 mm stroke Year of manufacture: 1985 Equipment: Hydraulic die cushion Pneumatic clutch-brake Bjdpfx Ae Af Na Ajndodi T-slot table Central lubrication Air tank with service unit Separate electrical cabinet with control Dimensions and connection (approx.): Table size: approx. 1,380 x 880 mm Ram face: approx. 1,200 x 800 mm Table height above floor: approx. 800 mm Drive power: approx. 22 kW Power supply: 400 V, 3-phase AC, 50 Hz Weight: approx. 24 t Dimensions (L x W x H): approx. 2.5 x 3.0 x 4.5 m Location: Slovenia Delivery terms: EXW Price: EUR 22,000 net

Condition: good (used), Year of construction: 2005, machine/vehicle number: 1151, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 100 t, stroke length: 125 mm, total length: 2,050 mm, total width: 1,440 mm, total height: 3,220 mm, overall weight: 8,000 kg, Single-column (C-frame) eccentric press Gorenje Indop 100 t, manufactured in 2005 and CE-marked, for sale. The press is currently in production use, fully functional, and can be inspected while running. Technical data (as per nameplate): Nominal force: 1,000 kN (100 t) Stroke: 20–125 mm, adjustable Ram adjustment: 80 mm Distance table–ram (ram at BDC): 310–390 mm at 125 mm stroke, 362–442 mm at 20 mm stroke Year of manufacture: 2005 CE marking Serial no.: 1151 Equipment: Adjustable stroke via eccentric bushing Bodpfxs Af Nh Rj Andedi Motorized ram adjustment with position indicator Hydraulic unit (overload protection) Movable two-hand control console with emergency stop Flywheel drive T-slot table Separate electrical cabinet Power supply: 400 V, 3-phase AC, 50 Hz Weight: approx. 8,000 kg Dimensions (L x W x H): 2,050 x 1,440 x 3,220 mm Location: Slovenia Delivery terms: EXW Price: EUR 12,000 net Weight and dimensions are approximate values and must be verified by the buyer before transport.

Condition: used, End-of-project equipment for rebar processing – lot in Denmark Beton Mark S.r.l. is offering for sale a lot of rebar processing equipment acquired after the completion of the SBJV bridge works in Vordingborg, Denmark. The lot includes machinery from Schnell and OSCAM. Bdeds Agnf Uepfx Andji The identified machines include, but are not limited to: - Schnell Bar Wiser Plus 26 multifunctional processing centre - Schnell Coil 16 Pack - Schnell Opti-Bat automatic cutting bench - Schnell Robomaster 40/12 processing centre - Rebar bending machines The equipment is for sale as a single lot. We will consider offers for the entire lot during a private negotiation. The published photographs are for illustrative purposes only and do not constitute complete documentation of all the equipment. Additional images and information can be provided upon request. To express your interest or submit an offer, please contact us, providing your contact details and the information you would like to receive.

Condition: used, Offered is a hydraulic press brake with 500kN pressing force. Stroke: max. 215mm. Operating pressure: max. 320bar. Stopping time: max. 95ms. Equipped with Lazer Safe laser guarding system. Inspection possible by arrangement. Bodpfxo Agwqwe Andsdi

Condition: used, Year of construction: 2016, operating hours: 17,381 h, functionality: fully functional, machine/vehicle number: 500015294, pressing force: 100 t, filling opening width: 970 mm, filling opening length: 1,800 mm, bale length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, total width: 9,152 mm, total height: 7,749 mm, total length: 38,975 mm, type of input current: three-phase, input voltage: 400 V, input current: 213 A, overall weight: 30,000 kg, pressure: 300 bar, transport height: 2,800 mm, pressure (max.): 330 bar, opening width: 970 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, control cabinet length: 3,000 mm, oil tank capacity: 2,000 l, empty load weight: 25,000 kg, operating pressure: 300 bar, transport width: 2,500 mm, transport length: 12,000 mm, input frequency: 50 Hz, Equipment: documentation/manual, We are offering for sale a HSM VK 8818 R FU channel baling press (compact in-line version) with Stadler brand conveyor in very good condition. The machine has been maintained and serviced by manufacturer HSM throughout the past 10 years. The price covers the complete equipment, exactly as shown in the pictures. Terms for sale: Bjdpfx Anj Agbq Sjdedi - The sale includes the complete equipment - Baling press, conveyor system, maintenance platform, wire stations, safety modules, documents, drawings, manuals - The buyer is responsible for dismantling and loading and transportation of the machine. If needed we can arrange dismantling and transport by 3rd party based on mutual agreement. - Complete service history and service reports are available for request For further information or to arrange an on site visit please contact us.

Condition: used, functionality: fully functional, Year of construction: 1998, operating hours: 35,000 h, machine/vehicle number: H981224, stroke length: 180 mm, throat depth: 410 mm, operating speed: 8 mm/s, reverse speed: 80 mm/s, table height: 960 mm, oil tank capacity: 150 l, overall weight: 13 kg, total length: 4,500 mm, total width: 2,200 mm, total height: 2,900 mm, power: 11 kW (14.96 HP), pressing force: 170 t, clearance between the columns: 3,760 mm, table length: 4,230 mm, table width: 180 mm, Equipment: CE marking, documentation/manual, safety light barrier, This machine can still be inspected in its current operational state at the factory in Northern Germany. Working length: 4100 mm Distance between columns: 3650 mm Pressing force: 170 tons Bdjdpfxs Ahfnuo Andsi Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Motor-adjustable rear back gauge Overhang: 300 mm Stroke: 200 mm Crowning Working height: 960 mm Motor power: 13 kW Dimensions (length x width x height): approx. 4500 x 2200 x 2900 mm Weight: approx. 14 tons Accessories: Includes tool cabinet with tools.

Condition: used, Model: HSM V-press 1160 plus baler Pressing force (kN): 59 Output (bales/h): 1-2 Max. bale size (mm): 1200x1100x1000-1200 Dimensions (L x W x H, mm): 1780x1150x2985 Bedpev Al Tijfx Andsdi Power (kW): 4kW Weight (kg): 2300 Year of manufacture: 2018-2019

Condition: used, Format: 0x0 Bedpox Rh D Sjfx Andsdi Equipment: Toggle press for beech corners, 40 mm stroke, 73 mm throat depth

Condition: used, Year of construction: 2022, Technical details: Pressure: 30 t stroke: 142,5 mm table surface area: 500 x180 mm passage opening in table: 500 x160 mm distance between columns: 1000 mm daylight dimension : table/slide up: 120 - 1020 mm machine weight approx.: 176 kg dimension machine xH: T: 0,8 x 0,8 x 1,8 m Bodpfou N A Eaex Andsdi Simple hydraulic double column press - special construction welded from 20mm sheet steel. Table support with prism 260 x 205mm Lower beam installation height max./min.: 1031 / 151mm Table height above floor max./min.: 1290 / 300mm Vertical lower beam, adjustable, manual, 10 steps, 100mm distance between steps Plunger cheek Lifting cylinder Ø 63mm with plunger holder Trunnion bore Ø 25 x 25mm *

Condition: used, Year of construction: 1980, Technical details: Pressure: 160 t stroke: 20-160 mm throat: 400 mm ram adjustment: 120 mm no. of strokes: 71 Hub/min daylight dimension : table/slide up: 720 (bei Hub 160mm) mm daylight dimension : table/slide low: 560 (bei Hub 160mm) mm ram surface area: 900 x 660 mm distance between columns: 500 x 450 mm table surface area: LxBxØ: 1200 x 750 x 100 mm total power requirement: ca. 23.0 kW weight of the machine ca.: ca. 15,0 t dimension machine xH: 2,7 x 1,5 x 3,45 m dimensions electric cabinet LxWxH: 2,0 x 0,65 x 2,15 m Operation via control panel/operator stand/foot control and hand-held control unit Bodou N A U Ijpfx Andjdi The press can be offered with two options. 1st option: Sold as is, not connected, not complete, not functional. 2nd option: The baler will be refurbished, all parts will be exchanged, replaced and puddled. The press will be set up again. For inquiries about this press, please select your offer option! in progress. *

Condition: good (used), Year of construction: 2000, Punch press Manufacturer: EHT Type: Strippit 1500/30 Year of manufacture: 2000 CNC control: Fanuc Working area without repositioning: 2500 x 1500 mm Maximum material thickness: 8 mm Bdjdpeul S Eaefx Andei Punching force: 30 tons Turret with 46 tool stations, including 4 indexing stations, size D 3 programmable clamps Metal table Used exclusively in single-shift operation Includes tools from WILSON TOOL 191026

Condition: new, Pressing force: 100 t Maximum stroke: 380 mm Working width between columns: 1100 mm Cylinder diameter: 220 mm Diameter of the piston rod: 90 mm Diameter of the piston head: 120 mm Pressing speed: 2.47 mm/s Feed speed: 7.54 mm/s Retraction speed: 9.06 mm/s Motor power: 2.2 kW Machine dimensions L x W x H: 1665 x 865 x 2140 mm Weight: 970 kg Accessories / Special features: • Adjustable cylinder • Chrome-plated, hardened piston with detachable base • Integrated pressure gauge • Pressure regulation • Two speeds and regulating valve Bsdjhauyyjpfx Andjdi • Adjustable work table • Joystick for operating the piston • Hand pump with dual operation for highly precise pressing operations • CE compliant Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D-44143 Dortmund - Wambel

Condition: new, Year of construction: 2026, functionality: fully functional, PLATEN LENGTH MM. 3000 PLATEN WIDTH MM. 1300 PRESS STROKE MM. 400 VERTICAL CYLINDERS 6 - DIAM. 70MM. INTERMEDIATE PLATENS CONFIGURATED TOTAL THRUST 90 TON Bsdpfx Aoi E Tz Hendedi TOTAL POWER KW 21 HEATING DIATHERMIC OIL

Condition: good (used), Brand: BRAMIDAN Model: B3 Width (cm): 94 Depth (cm): 72 Height (cm): 198 Weight (kg): 310 Power (kW): 1.1 Voltage (V): 230 Chamber width (cm): 70 Chamber depth (cm): 50 Chamber height (cm): 110 Year of manufacture: 2010-2015 Pressing force (t): 3 Noise level (dB): 69 Price: 2000 EUR B5 - Ideal for large boxes: High performance – high throughput Bales are ejected automatically Belt rollers positioned at the front for easy belt replacement Weight of cardboard bale (kg): 80-110 Weight of plastic film bale (kg): 90-130 Bale size (W x D x H) (mm): 1000 x 700 x 800 Bedpfxsv Akr Rs Andedi Pressing force (t): 5 Power supply: 1x230V 50Hz 10A Motor (kW): 1.1 Noise level (dB): 65-68 Average cycle time (sec): 33 Dimensions (W x D x H) (mm): 1360 x 895 x 2370 Weight (kg): 600 Feeding opening width x height (mm): 1000 x 500 Year of manufacture: 2014-16, cost: 3800 EUR Orak 3100 baler costs 2000 EUR Orwak 3105 baler costs 2200 EUR

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 97800 € 1848.42 € 160 to 1100 mm 700 mm 210 mm 23 - 110 mm 60 1/min 630x400 mm 8 95 mm 65 mm 325 mm 480 mm 2400 mm 1430 mm 3200 mm 9950 kg 8-fold ram guide light guard mot. ram adjustment hyd. overload safety device automatic lubrication according to CE rules user manual in GERMAN and ENGLISH Bodpfxeynnbwe Andedi

Condition: used, Year of construction: 2021, Technical details: Bdodpfx Aoy N R Hmondoi voltage: 400/50 V/Hz air-pressure connection: - bar control: - capacity: 150 kg/h protection class: IP 20 temperature range: 0 - 40 °C sound level:

Condition: excellent (used), Hydraulic Veneer Press with Medium Heating Plates Under-piston design Medium heating plates for connection to the hot water system Central control panel with all operating elements Analog temperature display for the heating plates Pressing pressure can be infinitely adjusted via pressure switch two-stage hydraulic pump Rack compensation Main switch Safety pull cord CE marking Pressing area: 2550 x 1350 mm Opening height: approx. 350 mm Bdsdsy Egkgepfx Andei Number of pressing cylinders: 4 Total pressing force: 70 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 1.5 kW Required space (L x W x H): approx. 3000 x 1400 x 1850 mm Weight: approx. 3,200 kg Note for Used Machines: • Subject to technical changes and prior sale. • All prices quoted are ex-works - free loading! • The machines have been cleaned and functionally tested. • All machines are purchased as seen, without any warranty claims. Buyers are welcome to inspect the machines on site. • Special agreements must be made in writing. (Inquiries will only be answered upon receipt of your address and telephone number!)

Condition: used, Year of construction: 1991, Technical details: Pressure: 160 t stroke: 500 mm throat: 360 mm max. ram stroke: 500 mm distance table/ram: 800 mm clamping plate on table: 1250 x 630 x 100 mm Bdjdpfx Ajw D Awmsndsi passage opening in table: 4x D=62 mm ram speed - forward: 200 m/s ram speed - reverse: 125 m/s ram surface area: 450 x 850 mm mortise hole in ram: 49 mm height over floor: 810 mm total power requirement: 17 kW weight of the machine ca.: 7200 kg dimension machine xH: 2,1 x 1,4 x 3,4 m manual counter *

Condition: good (used), Various press brake tools, punches, dies Bending length 2500 + 3050 mm Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel Bsdpjw Emf Dsfx Andjdi

Condition: used, Year of construction: 1995, functionality: fully functional, total length: 3,400 mm, total width: 1,650 mm, total height: 2,550 mm, overall weight: 6,000 kg, Equipment: CE marking, ORMA NPC 6/100 Veneer Press Shelf length: 2500 mm Shelf width: 1300 mm Number of loading cycles: 3 Automatic pressure increase Safety cable (“breakaway” cable) Bodpfx Aez Nvd Tendodi Hydraulic press with heating via water from the central heating system Working pressure: 350 bar Press with 6 cylinders Cylinder diameter: 85 mm CE certified Machine dimensions: 340x165x255 cm (H) Machine weight: 6000 kg

Condition: used, Year of construction: 2013, Manufacturer: HSM Bdjdpfx Aez I N Uhjndji Type: HL 4010 Re Year of manufacture: 2013 Pressing force: 40 t

Condition: excellent (used), Year of construction: 2003, operating hours: 60,000 h, Press force / Bending length: 1700 kN / 4080 mm TrumaBend control system / Standard: 2D graphics control, color, DELEM. Bdedpfx Anez I Suksdsi