Used Excentric Press for sale (12,157)

Condition: new, stroke: max. 500daylight: max. 1000motor: 15performance of pump: 65oil filling: 120messurements (LxWxH): 1300 x 3300 x 2950weight approx.: 6000pressure: 300Speed: vorlauf 8 / rücklauf 13,5Electro-hydraulic workshop press 300 t- Anti-rotation device for the cylinder piston - Pressure regulating valve - Speed control throttle valve - Emergency stop safety device - Noise level: 75 dB - Soft starter - Two-hand control panel - Linear measuring device for stroke adjustment with digital display - Pressure gauge - Digital pressure display - Emergency stop buttons on the control cabinet and on the two-hand control panel - Hydraulic tank including motor mounted at the lower side next to the frame - Hydraulic lines with check valves - Table manually height-adjustable and secured with 3 locking pins Hedpfx Ajz Hgb Ajirjw

Condition: used, total length: 1,250 mm, total width: 1,250 mm, total height: 2,400 mm, Year of manufacture: 1988 Colour: Blue Hedpfx Aioz Avbtsrew Empty weight: 3.000 kg Price: On request - Year: 1988 - Documentation available: No - CE certificate present: No - Serial number: 4441 - Drive system: Conventional - Press model: C-Frame press - Press configuration: Single-acting - Press force [ton]: 50 - Min. stroke [mm]: 0 - Max. stroke [mm]: 85 - Table length [mm]: 440 - Table width [mm]: 700 - Table bore diameter [mm]: 270 - Ram width [mm]: 300 - Max. opening height [mm]: 360 - Height adjustment [mm]: 70 - Pressing speed [mm/s]: 145 - Transport dimensions: 1250mm x 1250mm x 2400mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2006, operating hours: 22,000 h, functionality: fully functional, EQUIPMENT FOR TRANSPORT AND MANIPULATION OF RAW MATERIALS The equipment consists of:  Mercedes Actros container truck Hodpjz I Tm Uefx Airsw  Two containers with a volume of 10 to 20 m3 for sawdust  Liebherr bulk loader Equipment condition:  In good condition EQUIPMENT FOR THE PREPARATION OF RAW MATERIALS The equipment consists of:  Waste bin with movable floor - volume approx. 10 m3  Pneumatic transport systems with filter  Conveyor belts and augers  Sawdust dryer with biomass burner  Hammer mill for chopping wood chips with associated equipment  Control cabinets for each piece of equipment Capacity of the complete plant:  About 2 t/h of dried sawdust Equipment condition:  Completely overhauled BRIQUETTING PRESS WITH SAW AND PACKING UNIT Full capacity is 3,5T/h A complete briquetting line consisting of the following:  Briquetting press BP6000 CFN consisting of: o Silos for raw materials o Dosing screw o Oil and press head cooling system o Original press head and cooling line for briquettes with a diameter of 90 mm for hardwood o Manual and automatic control system o Current condition: the press has been 100% serviced and all vital parts of the press have been changed so that it is like new ones o Large quantity of spare parts in stock including spare axle and eccentric  Saw for cutting briquettes BRIDGE o Current condition: the equipment has been fully serviced  Automatic packaging machine for briquettes ROSMAN o Current condition: the equipment has been completely serviced and a new control cabinet has been made

Condition: used, Year of construction: 1967, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Performance data Pressure: 80 t Stroke rate: 125 strokes/min Total power requirement: 9.5 kW Hjds Aa Ntnopfx Airjw Machine weight: approx. 4.4 t Stroke and ram data Stroke: 20–120 mm Ram dimensions: 560 × 355 mm Ram adjustment: 72 mm Working area Overhang: 280 mm Table Table width: 710 mm Table depth: 560 mm EQUIPMENT UVV – accident prevention regulation

Condition: used, Year of construction: 1990, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine Type: Press brake Condition: good Performance Data Pressing force: 80 t Bending length: 2,505 mm Frame width: 2,200 mm Total power consumption: 7.3 kVA Machine weight: approx. 5.6 t Hodpj Aa Aanefx Airow Control System Control: AMADA-MELDAS NC 9 F Controlled axes: 7 Dimensions Space requirement: approx. 3 × 2.25 × 2.20 m EQUIPMENT Detailed machine documentation available

Condition: good (used), Year of construction: 2005, Used 2-meter CNC press brake from Amada Type: HFP 20 50 Hedpfx Ae Aazxcsirsw Capacity: 2050 x 50 tons Y1, Y2, X1, X1, R1, R2, Z1 and Z2 CNC controlled WILA NS hydraulic upper and lower clamping system Automatic Akas Fiessler safety system Year of manufacture: 2005 New computer in the control cabinet

Condition: good (used), Year of construction: 2008, Used 3-meter E Brake by Safan Type: E Brake 100 3100 TS1 Hjdpfx Aio Aazxiorsw Capacity: 3100 x 100 tons Y1, Y2, X, R, Z1, and Z2 CNC controlled Wila hydraulic top clamp Adjustable crowning Year of manufacture: 2008

Condition: good (used), Year of construction: 2018, CNC press brake Manufacturer: SMD Yawei Type: PBB-630/6200 Year of manufacture: 2018 CNC control: CYBELEC ModEva 15 Press force: 6,300 kN Working width approx. 6,200 mm DSP Laser-TX Hsdpforivu Ssx Airew Connection power: 400 V / 95 kVA 191026ä

Condition: used, Heavy-duty pneumatic gluing press with perforated sheet metal for flexible positioning of the press cylinders. One cylinder without a pressure shoe. Technical data: - Pressing area: approx. 2,800 x 1,000 mm - Width: 600 mm - Height: 1,800 mm Hsdpfxozryy Ej Airsw - Press cylinders: 6

Condition: new, functionality: fully functional, Year of construction: 2026, controller model: Estun E21, stroke length: 150 mm, throat depth: 320 mm, overall weight: 9,800 kg, total length: 3,200 mm, total width: 1,850 mm, total height: 2,690 mm, input voltage: 400 V, pressing force: 125 t, table length: 32,000 mm, table width: 2,650 mm, type of input current: three-phase, Equipment: 4th hydraulic function, CE marking, documentation/manual, safety light barrier, The Digima PBH-125X3200 hydraulic press brake is a professional machine designed for precise sheet-metal bending in manufacturing plants, metalworking workshops and companies specialising in metal fabrication. Its robust construction, high pressing force and large working area make it suitable for both individual projects and repetitive production batches. The machine provides a maximum pressing force of 125 tonnes and a working length of 3,200 mm. This makes it possible to bend long sheet-metal components and perform demanding production operations. The distance between the columns is 2,650 mm, the throat depth is 320 mm, the maximum opening is 415 mm, and the ram stroke is 150 mm. These parameters provide sufficient working space for components of various sizes and shapes. The press brake is equipped with an Estun E21 controller, which allows the operator to program bending parameters and accurately control the position of the back gauge. The system can store up to 40 machining programs, each containing a maximum of 25 working steps. Automatic reference-point searching, rapid position indexing and parameter backup functions reduce machine setup time and improve the repeatability of finished components. The hydraulically driven bending beam ensures smooth and stable movement as well as consistent application of the pressing force. The machine is powered by a 7.5 kW motor. Precision ball screws and linear guides minimise mechanical play and support accurate component positioning. A Rexroth hydraulic valve system provides reliable oil-flow control, while electrical components from Schneider Electric and Lintech increase the safety and durability of the electrical installation. The AMADA quick-clamping system enables fast tool changes and reduces preparation time between different bending operations. The standard tooling includes a multi-V die suitable for bending sheets of different thicknesses and angles, as well as a four-piece punch set made from durable tool steel. The machine is also equipped with four adjustable back-gauge fingers, which help the operator position the material accurately before bending. Side and rear safety guards equipped with limit switches protect the operator from entering the working area while the machine is in operation. Opening a guard causes the machine to stop immediately, improving safety during everyday use. Hjdpezlpansfx Airjw The Digima PBH-125X3200 is a solid and versatile press brake for companies requiring high bending accuracy, repeatability and production efficiency. Its high pressing force, 3,200 mm working length, functional control system and industrial-quality components make it a reliable solution for intensive use in a professional sheet-metal processing facility.

Condition: used, total length: 4,100 mm, total width: 1,900 mm, total height: 3,000 mm, Year of manufacture: 2000 Colour: Blue Weight: 20.000 kg Price: On request Hsdjzmaa Iepfx Airew - Year: 2000 - CE marking present: Yes - Serial number: 80960 - Drive system: CNC - Control system brand: HACO - Control system type: BC50 Graphics - Power [kW]: 22.5 - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 300 - Max. working width [mm]: 3600 - Column gap [mm]: 3100 - Throat depth [mm]: 500 - Backgauge depth [mm]: 850 - Max. stroke [mm]: 250 - Crowning system: Mechanical - Punch holder: Standard - Tool holder type: European-style - Tools included: Yes - Transport dimensions: 4100mm x 1900mm x 3000mm (l x w x h) - Transport weight [kg]: 20000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: like new (used), functionality: fully functional, working width 3000 mm working height 2500 mm year of manufacture 1995 engine power 7 kW weight 2500 kg power supply 380 V side cylinders and gearboxes adjustable from the control panel Hedpfx Aiezn Iqwjrjw safety switch – shear pin CE marking

Condition: good (used), functionality: fully functional, Year of construction: 2001, operating hours: 7,300 h, stroke length: 400 mm, operating speed: 140 mm/s, reverse speed: 180 mm/s, oil tank capacity: 350 l, overall weight: 14,800 kg, total length: 6,350 mm, total width: 3,590 mm, total height: 3,220 mm, power: 18.5 kW (25.15 HP), input voltage: 400 V, pressing force: 175 t, clearance between the columns: 3,550 mm, distance table to ram: 720 mm, type of input current: three-phase, Equipment: CE marking, documentation/manual, safety light barrier, EHT VarioPress 175-40, approx. 7300 operating hours, original EHT tooling, straight bending tool 420 mm x 4000 mm, split, forming pad 220 mm x 4000 mm, split, 2 sets of dies, split, pneumatic tool clamping system, top and bottom, automatic crowning, 2 x adjustable material support arms, table/punch distance, min.: 320 mm, table/punch distance, max.: 720 mm, 3 stop fingers, manually adjustable, Hsdpfj Aa Nz Sjx Airew 2 sets of upper tools, 1 x forming pad 220 mm, 1 x straight tool 420 mm, original operating manual and electrical diagrams available, annual maintenance and safety inspection carried out, last maintenance in 2025.

Condition: used, Höcker Polytechnik frequency-controlled extraction system with an RSN ECO 40/12 briquetting press, designed to extract wood shavings and sanding dust from a small to medium-sized joinery or other woodworking workshop, complete with a connected hopper and briquetting press. Includes heat recovery and a number of extraction pipes with pneumatic dampers, suitable for equipping a workshop with approx. 5–10 machines. Technical data: - Fan 1: 11 kW Hodpsztvwisfx Airew - Fan 2: 3 kW - Press: 4.5 kW - Filter bags: 50 - Briquette: ~ 60 x 40 mm - Filter area: ~ 54 m² - Air flow rate: ~ 3,200 m³/h

Condition: used, functionality: fully functional, Solid Wood Press for Sale! Manufacturer: Societa Italiana Macchine Idrauliche, Milan (Italy) • 5 hydraulic cylinders at the top • 4 hydraulic cylinders at the bottom • Working area: approx. 2.5 x 1.3 m Hodpez Azqtofx Airow • Mechanical/hydraulic control (no automation) • Good visual condition; well-maintained. FULLY FUNCTIONAL ✅

Condition: used, Year of construction: 1998, Pressure 800 t distance between columns 3550 mm stroke 1100 mm Distance table/ram, max. stroke up, adjustment up 1900 mm Table surface area 3500 x 1800 mm pressure of drawing cushion in table 350 t Die cushion stroke in table 280 mm Die cushion pressure in ram 80 t Die cushion stroke in ram 160 mm Ram surface 3500 x 1800 mm Hjdpfxszrptnj Airsw Side window 1900 mm Weight 100,0 t Floor Space (WxD) 5,3 x 4,3 m Height above floor 7,3 m Height below floor 5,0 - 6,0 m year of manufacture 1970 - overhaul 1998 with oil-hydraulic drive, hydraulic controllable drawing cushion in table and ram, hydraulic cutting impact cushioning, moving table (without rails for the moving table) Height beneath floor approx. 5 - 6 m stored in dismantled condition - Video at seller’s site before dismantling available

Condition: used, Year of construction: 2005, Pressure 800 t distance between columns 2560 mm stroke 1050 mm Distance table/ram, stroke up 1870 mm Table surface area 2500 x 1730 mm pressure of drawing cushion in table 300 t Die cushion stroke in table 395 mm Die cushion area in table 2300 x 1300 mm Ram surface 2500 x 1730 mm Die cushion pressure in ram 63 t Die cushion stroke in ram 150 mm Side window 1000 mm Hjdpfx Aiezrpt Iorjw Oil volume 4300 l Power capacity 200,0 kW Dimensions (WxDxH) 4,1 x 2,8 x 10,0 m Height above floor 7,0 m year of manufacture 1974 overhaul 2005: formerly type BZE 800, converted to ZE 800 by manufacturer with new ram and new cylinder mit ölhydraulischem Antrieb, hydraulischem gesteuertem Ziehkissen im Tisch und Stößel stored in dismantled condition - Video at seller’s site before dismantling available

Condition: excellent (used), Xerox Versant 4100 Including: Fiery EX 4100 1 x OHCF (Optional Handling and Finishing) FIM (Feeder and Inserter Module) C/Z fold unit Hedpfx Aeychr Esirsw Booklet maker The machine is in perfect working order!

Condition: used, Opal Type: Opal 460 Opal 460 by ATM The Opal 460 is a fully hydraulic, water-cooled hot embedding press for embedding polished samples. The process sequence is carried out automatically. The fully automatic sliding shutter enables smooth opening and closing of the embedding area. Hjdpfx Aiszh D Avjrow Manufacturer: ATM Q Ness GmbH Model: OPAL 460 Operating principle: The Opal 460 is a fully hydraulic, water-cooled hot embedding press for embedding polished samples. In hot embedding, the sample is embedded in an embedding press under temperature and pressure with a plastic granulate. The advantages of the process are the high hardness of the embedding media (e.g., glass fiber reinforced) and the good gap-free embedding. Hot embedding media are available based on epoxy resin, acrylic resin, phenol resin, and graphite resin. Main application area: Embedding the samples for better sample preparation for further metallographic examinations. Technical data: Press mold diameter: Ø 30 mm, Ø 50 mm Temperature range: 20 ... 200 °C Max. pressure: 310 bar Weight: ~ 40 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 2001, pressure 200 t table surface area 1600 x 1300 mm ram stroke 600 mm dayligth 900 mm die cushion capacity 80 t die cushion stroke 150 mm Hjdpfx Aijz St Izersw die cushion area 1200 x 750 mm distance between columns 1650 mm table height over floor 1060 mm ram surface 1600 x 1300 mm oil volume 1400 l height over floor 3500 mm rapid drop speed 400 mm/sec drawing speed 42 (80 to) mm/sec drawing speed 20 (200 to) mm/sec return speed 325 mm/sec Control Siemens total power requirement 75 kW weight of the machine ca. 20 t Machine is with cushion in table (80 t), light guards and Siemens control for presses.

Condition: used, Year of construction: 1981, pressure 030 t throat 250 mm stroke 100 mm table-size 500 x 400 mm max. distance table - ram 320 mm ram surface 350 x 220 mm hole in the table 130 x 100 mm total power requirement 5,5 kW weight of the machine ca. 2 t dimensions of the machine ca. 1,8 x 1,6 x 2,5 m Hjde Ad Rlmepfx Airsw Fabricated construction with light guard and two hand switch.

Condition: used, functionality: fully functional, Year of construction: 1997, machine/vehicle number: HIW1000/610-201, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, emergency stop, foot remote control, quick-change device, For sale is an extremely powerful and versatile hydraulic universal punching and shearing system from the German premium manufacturer Mubea (Muhr und Bender), model HIW 1000/610. This dual-cylinder machine allows for independent operation at the stations and offers a tremendous punching force of 100 tons (1000 kN) with an extra-deep throat depth of 610 mm. The system is CE-certified, manufactured in 1997, and is ideally designed for heavy-duty applications in steel construction, metalworking, and industrial manufacturing. Hedpfo Adzciox Airsw Technical data: • Manufacturer: Mubea (Muhr und Bender) • Model / Type: HIW 1000/610 • Machine No.: HIW1000/610-201 • Year of manufacture: 1997 • Connection voltage: 400 V / 50 Hz (3 phases) • Control voltage: 24 V • Punching force: max. 1000 kN (100 tons) • Throat depth: 610 mm • Machine weight: 3,150 kg • CE marking: Present Performance data & capacities (for material with 450 N/mm² tensile strength) • Flat steel shear: • max. 600 x 15 mm • max. 400 x 20 mm • Profile steel shear (C- and I-profiles / flanges): • S = 13 mm • B = 60 mm • T = 90 mm • Angle shear: • 90°: max. 160 x 16 mm • 45°: max. 70 x 7 mm • Bar steel shear: • Square bar (☐): max. 50 mm • Round bar (◯): max. 50 mm • Hole punch: • max. Ø 40 mm in 22 mm material thickness Includes a large amount of accessories and a length stop.

Condition: excellent (used), Catalog number: 7984 TECHNICAL DATA - Clamping force: hydraulic - Briquette shape: round - Briquette diameter: 70mm - Hopper diameter: 1000mm - Output: up to 10 briquettes/min, up to approx. 90 kg/hour - Automatic machine operation - Motor: 5.5kW - Dimensions (L/W/H): 1800x1200x1500mm Hodezwwxcspfx Airew - Weight: approx. 650kg ADVANTAGES - Made in Italy - Used briquetting machine - Unpainted - Very good condition Net price: 33900 PLN Net price: 7884 EUR, depending on an exchange rate of 4.30 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: excellent (used), Catalog number: 7732 TECHNICAL DATA - Pressing force: hydraulic - Briquette shape: round - Briquette diameter: 70 mm - Hopper diameter: 1200 mm - Capacity: approximately 70 kg/h - Automatic machine operation - Motor: 7.5 kW - Max. operating pressure: 150 bar - Dust extraction outlet: 90 mm - Diameter of the filter bag opening: 500 mm - Max. bag height: 900 mm - Dimensions (L/W/H): 1950x1400x2700 mm - Weight: 1130 kg ADVANTAGES – Made in Italy – Option for direct connection of a sawdust extraction system – Used briquetting machine – DTR documentation available – Very good condition Net price: 29900 PLN Net price: 6953 EUR, depending on the exchange rate of 4.30 EUR Hedpfx Ajzw Dbkjirjw (Prices are subject to change due to significant fluctuations)

Condition: good (used), functionality: fully functional, Year of construction: 2003, Key parameters: Manufacturer: TRUMPF Maschinen Austria GmbH & Co.KG Model: TrumaBend V170 Year of manufacture: 2003 Pressing force: 1700 kN (170 tons) Max. bending length (working length): 4,080 mm Hede Acm E Hepfx Airjw Throat width (distance between side frames): 3,680 mm Max. stroke: 365 mm Stand clearance (cut-out): 410 mm Electrical and hydraulic parameters: Supply voltage: 3x400 V Frequency: 50 Hz Rated current: 46.3 A Total power consumption: 32.0 kVA Max. operating pressure: 340 bar Oil tank capacity: approx. 95 liters Hydraulic cylinder diameter: 190 mm Machine dimensions and weight: Total weight: approx. 18,000 kg External machine dimensions (W x D x H): approx. 5,000 x 2,210 x 3,100 mm. The machine is offered without tooling.