Used Stairs for sale (194)

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 8481-05-K951, Edge finishing with fine grinding We used this machine to process stair treads. 6 processing units: 1 x coarse grinding of the surface 2 x fine grinding of the surface 3 x profile milling on the top 4 x profile milling on the bottom 5 x profile grinding on the top 6 x profile grinding on the bottom Automatic feed – speed can be adjusted continuously Material thickness sensor Ledezv Eaxspfx Ahtohk The machine is equipped for processing stair treads with an edge rounding of r=8mm on the top and bottom (individually controllable). After cutting the treads to size on the circular saw or CNC machine, we completed the processing of the treads in a single pass from the top and bottom. The machine can also be adapted for other profiles, radii, or milling operations.

Condition: excellent (used), Year of construction: 1998, Hofmann HT 200 U frame dowel and elongated hole drilling machine with angle adjustment. Special drilling machine for staircase construction, window construction, and universal applications through pneumatic height adjustment. Angled dowel drilling and picket drilling can be easily performed thanks to the rotatable drilling unit. Motor with pole changeover, two speeds. Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm. Motor start with a practical handle switch. Precision chuck with two inserts, 16 mm and M10 thread. Table size approximately 1100 x 240 mm. Linear laser for precise positioning of the workpiece. Drilling unit can be rotated 65 degrees to the left and right. Pneumatic adjustment of the processing height, dowel drilling on two levels without retooling. The desired drilling heights can be set for each drilling level using a handwheel and digital counter; the changeover is then performed pneumatically from the front. Ledpfx Aeyfta Tehtjhk Cross adjustment approximately 320 mm, stepless or in a 12 mm grid. Drilling stroke approximately 200 mm. 2 pneumatic workpiece clamps, can be positioned at the front and rear of the table. 2 swiveling workpiece supports. 2 side stops, also usable as a front support. Undercarriage. Dust extraction connection 80 mm. 4 used but good drill bits, 9, 12, 16, 19 mm. Few paint spots have been touched up; very good condition, see original photos. A used, swiveling elongated hole drilling machine in this condition is rarely available. CE marking. Operating manual. Dimensions approximately 1200 x 1200 x 1200 mm (L x W x H), weight 310 kg. The machine can be demonstrated on site after prior arrangement. We only offer machines that are ready for demonstration and are in stock, see "other offers from this provider".

Condition: used, 4m Length, 670 working height, 850 minimum stroke. 8 x Cramping bars at 500mm centres 3 x Hyrdaulic cylinders via motorised pump with starter Suitable for open plan and wedged stairs Lsdpfx Ahjymm Sfstohk

Condition: like new (used), Year of construction: 2005, functionality: fully functional, GÖTZINGER RBS Dowel and Stair Drilling Machine, Swiveling with Laser In very good condition, the machine has been used very little and is in absolutely like-new condition; it comes from an educational institution. It can be used to drill dowel holes and similar. The machine has a BKF-5 drilling head with 5 drill chucks, M10 internal thread. The distance between the drill chucks is 32 mm horizontally and 25 mm vertically. The entire drilling head can be swiveled 360° with a degree indicator and various scales. A standard 2-jaw chuck can also be used. You will also receive 3 additional drill chucks for drills with a cylindrical shank of 12 or 16 mm, and for drills with an M10 external thread. The machine table is 1100 mm wide and 250 mm deep. There is a stop at the front that can be recessed if needed. For the production of dowel joints, there are 2 adjustable angle stops on the machine table, which can be set with an accurate scale. In addition, there are two 2500 mm long stop rails with 2 folding stops and a scale each; these stop rails can be mounted on the left and right. The machine drills completely automatically, which was problematic with larger drill diameters. For this reason, the machine has been converted to manual feed via a feed lever and switch. The workpiece is clamped with 2 pneumatic clamping cylinders; the switch is located directly on the clamping cylinder. 380V, 2100W 2820 rpm Year of manufacture: 2005 Weight: approx. 300 kg With this machine, you can produce all types of frame dowel joints, at right angles, butt joints, and miter joints. Ideal for the production of dowel joints in timber frame construction, furniture, door and window construction, and similar applications. Stairs can be manufactured very well due to the swiveling capability. The drilling unit can be swiveled to both sides up to 65° with a scale and has a detent at 0°. This allows handrails to be drilled very well into stair stringers with the machine. Due to the stops, the drilling head, and the construction of the machine, dowel joints are produced in a very short time, which makes the machine very economical. The machine requires a compressed air connection of 6 bar (the air consumption is very low). Ledpszgh Tvsfx Ahtshk Right-hand rotation. Mills and drills very well and cleanly. The linear laser at the top of the machine allows marked dowel holes and angles to be drilled very quickly and accurately. The max. drilling height is 100 mm; the drilling height is adjusted at the front under the machine table with a handwheel. The height can be read on a very precise, mechanical counter. The max. drilling hole depth is 190 mm with a stop and scale. The max. workpiece height is 360 mm. Everything functions perfectly. Comes with a manual. We will personally deliver and demonstrate the machine anywhere in Germany for 220.00 euros. This means you have no risk when purchasing. Delivery to Austria and the rest of the EU is also possible upon request. Professional equipment, not hardware store junk. You can start working with the machine immediately. Very stable and durable construction. The precision guides with the backlash-free ball bearing bushings are in good condition and move easily. The swiveling mechanism is also very smooth due to the 2 groove ball bearings; locking is possible with a locking screw.

Condition: good (used), Year of construction: 2003, machine/vehicle number: 21017403, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 1,250 mm, travel distance Y-axis: 5,900 mm, travel distance Z-axis: 250 mm, workpiece weight (max.): 8,000 kg, number of slots in tool magazine: 32, controller manufacturer: BWO 900C, overall weight: 8,000 kg, year of last overhaul: 2024, spindle motor power: 12,500 W, mount diameter: 90 mm, number of spindles: 1, rotational speed (max.): 17,000 rpm, rotational speed (min.): 1,000 rpm, tool diameter: 160 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The machine is in working order and in use will be available from 01.11.2024 at the earliest .After services and repairs are Vacuum pump, central lubrication, tool magazine, spindle . The machine connected to the network is possible to check and try out. In addition, on the equipment of the machine is a software with a postprocessor for the production of stairs and a laser projector. There is a possibility of training . Lhsdpeuyl Npjfx Ahtjk

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, working width: 450 mm, warranty duration: 12 months, total height: 220 mm, total width: 460 mm, total length: 880 mm, water tank capacity: 10 l, We offer for sale a BR 45/10 Esc Staircase Scrubber Condition – Very good Year of manufacture – 2014 The machine is in very good condition – both visually and technically. It has undergone a complete, thorough overhaul, making it fully functional and ready for operation. Each device we offer is presented in authentic photos – you are buying exactly the machine shown in the pictures. All machines purchased from us come with a 12-month WARRANTY. Technical Data: Brush working width (mm): 450 Working/suction width (mm): 450 Tank capacity (l): 10 Brush rotation speed (rpm): 290 Brush motor power (W): 190 Vacuum motor power (W): 1500 Voltage (V): 220 / 240 Frequency (Hz): 50 Weight (kg): 44 Dimensions (L x W x H) (mm): 880 x 460 x 220 Lhsdpow Igrzofx Ahtjk

Condition: excellent (used), Year of construction: 1995, CNC machine in good condition due to limited use. Previously used for door production but can be used for any purpose. Double table, can be loaded from the left and right. 4-axis x 5000 mm y 1350 mm z 450 mm Ljdpfoig T Epsx Ahtjhk a 190° Main spindle SK 40, 8 kW, water-cooled Up to 17,000 rpm Chain magazine with 24 positions.

Year of construction: 2016, condition: like new (used), functionality: fully functional, machine/vehicle number: 1109675-001, Robatech Concept Diamond 5/2 Hot Melt Melting Unit Manufacturer: Robatech Model: Concept Diamond 5/2 Article Number: 164001 Serial Number: 1109675-001 Year of Manufacture: 2016 For sale is a Robatech Concept Diamond 5/2 hot melt melting unit, used in an industrial setting. The unit was used in 2019 in a coating system for the production of stair treads. In the same year, the system was upgraded to a larger Robatech Concept Diamond 8 system because a higher melting capacity and conveying performance were required for production. Therefore, the machine offered here was not replaced due to a defect, but solely due to the increased production requirements. Since then, the unit has been kept as a backup machine. Equipment according to Robatech configuration: * 5 kg tank Ljdszfx A Espfx Ahtehk * Gear pump ZPC 5 * 2 sockets with a total of 4 heating zones * Level sensor ILS * External USB interface * Quantity control * Analog input 0–10 V or 4–20 mA * Pneumatic pressure control with pressure gauge for 1 pump * Filter cartridge sintered bronze 130 µm * Connection: 400/230 V AC, 3LNPE, 50–60 Hz, 25 A Technical data: * Type: Hot melt melting unit / Adhesive Melter * Tank size: 5 kg * Pump type: ZPC/GRC * Number of pumps: 1 * Year of manufacture: 2016 * Serial number: 1109675-001 The unit is in good used condition. Inspection is possible by prior appointment. Errors and prior sale excepted.

Condition: like new (used), Year of construction: 2018, We offer You line Cabinplant with Multivac for snack packing. Production date of all machines year 2018. Line consisting af -Cabinplant 1 line elevator -Cabinplant 3 line elevator -Multihead weigher Cabinplant MHW 10 24 Lhsdopxm Ugspfx Ahtjk -Multihead weigher Cabinplant MHW 10 32 -KEN hygiene system EWD 50 -Platform with stairs -Cabinplant distribution tools 2 pcs -Multivac R245 Type ASE 500, gas, vacum, without a vacum pump The set worked only during device tests, working for approximately 100 hours. The line was dismantled by the manufacturer's services: Cabinplant and Multivac.

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, Stair milling machine SELECT 20300. Simply, quickly and precisely mortise steps and risers into stair stringers and posts. You can adjust the step length, step thickness, riser thickness, tread height and step nose. The machine has been completely overhauled and is technically in mint condition. Newly painted. Lhodpov H D Tvjfx Ahtek

Condition: good (used), Year of construction: 2014, Various staircases – used: Price per step: €95.00 (net), disassembled, packed, and loaded at the storage location! Pos 2+3: Wide, with 6 steps Pos 4: Wide, with 6 steps Pos 7: Narrow, with 13 steps and a “door” Pos 9+10: Wide, with 14 steps Pos 11: Wide, with 15 steps Pos 13: Wide, with 13 steps Pos 13a: Wide, with approximately 7 steps Ledpfx Ahozqz Saotohk Manufacturer: Stow Type: unknown Year of manufacture: 2014 Steps: Galvanized grid grating Stringers and handrails painted Condition: good Available: approximately Q4/2026 Location: Hamburg

Condition: good (used), Year of construction: 2014, Stairs / Staircase with intermediate landing – used: Price: €2,500 (net), disassembled, packed, and loaded at the location! Ljdozqz T Depfx Ahtjhk Item 1 Manufacturer: Stow Type: unknown Year of manufacture: 2014 Ground floor to landing: approx. 14 steps (the 14th step is at the level of the landing) Landing to upper floor: 11 steps (the 11th step is at the level of the upper floor) Distance between steps: approx. 18.5 cm Width: approx. 1.25 m With intermediate landing Steps: galvanized grating Stringers and handrail painted Condition: good Available: from approx. Q4/2026 Location: Hamburg

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 20787, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, IMA BIMA 410 V 140/600 – Professional CNC Woodworking Machining Centre. The machine features a gantry construction and is designed for the production of furniture, stairs, and special components. The large Z-axis travel (600 mm) enables machining of high workpieces. It is equipped with a 7.5–11 kW spindle, automatic tool changer, vertical and horizontal drilling heads, and a vacuum table with consoles. Controlled by IMA WOP. Manufacturer: IMA (Germany) Model: BIMA 410 V 140/600 Type: CNC Machining Centre for Wood (point-to-point) 🧩 Working Area • X-axis: up to approx. 6000 mm • Y-axis: approx. 1400 mm • Z-axis: version 140 / 600 mm (high Z-axis – large clearance) • Number of axes: 3–5 (depending on configuration and head) ⚙️ Main Spindle • Power: 7.5 – 11 kW • Speed: 1,500 – 24,000 rpm • Tool holder: HSK F63 • Max. tool diameter: approx. 100–150 mm • Max. tool length: approx. 150 mm • Max. tool weight: approx. 6 kg 🔧 Tool Magazine • Automatic tool changer • Number of positions: 18 Lsdpfx Aoyky Hdshtjhk 🪚 Working Units (typical) • Vertical drilling heads: up to 21 spindles • Horizontal (cross) drilling heads • Special aggregates (optional): • Lock case routing units • Grooving saw • Blum/Lamello hardware aggregates • Angular aggregates 🧲 Worktable • Pod & rail vacuum table (consoles) • Approx. 8 working consoles • Vacuum pumps: 2 units (approx. 100–140 m³/h) ⚡ Drives and Feed Rates • Rapid traverse: • X: up to approx. 100 m/min • Y: up to approx. 80 m/min • Z: up to approx. 25 m/min 💻 Control • CNC: IMA WOP / IMAWOP (optionally Siemens / Beckhoff) ⚙️ Installed Power • Total connected load: approx. 23 kW 📏 Machine Weight • approx. 6,500 – 8,500 kg (depending on configuration)

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: A050694, total length: 4,500 mm, total width: 1,000 mm, type of input current: three-phase, overall weight: 850 kg, height adjustment type: mechanical, input voltage: 400 V, extraction connection diameter: 160 mm, input frequency: 50 Hz, grinding width: 140 mm, Grinder for narrow surfaces with the possibility of milling edges and grinding them. At the beginning there are two sanding units with oscillation and 160 mm wide belts, i.e. pre-sanding followed by smoothing, then two units milling the edges from above and below, equipped with cutters for rounding edges r-6 mm and further two units sanding with narrow belts after milling at the end, also with oscillation, and the last seventh unit with a brush wheel for smoothing. The machine is suitable for sanding wooden parts of solid wood and MDF boards, such as countertops of various types, shelves , elements of stairs, doors, windows and other various types of furniture and wooden construction elements. Ready to work possibility to check and start on site. Equipped with several sanding tapes and some parts. Lhedpfxsuynnuo Ahtsk

Condition: good (used), Year of construction: 2014, Staircase/stairwell with intermediate landing – used: Price: €2,000 (net), disassembled, packed, and loaded at the location! Item No. 4 Manufacturer: Stow Type: unknown Year of manufacture: 2014 Approximately 10 steps from the ground floor to the landing Ledpfx Aozqz Syshtshk Further data will be determined Width: approx. 1.25 m With intermediate landing Steps: galvanized grating Stringers and handrails painted Condition: good Available: from approx. Q4/2026 Location: Hamburg

Condition: good (used), Year of construction: 2014, large staircase with 2 intermediate levels – used: Price: €4,000 (net), disassembled, packaged, and loaded at the location! Item No. 14 Manufacturer: Stow Type: unknown Year of construction: 2014 Distance between steps will be provided later. Width of the staircase will be provided later. Dimensions of the landings will be provided later. Ground floor to landing 1: Number of steps will be provided later. Landing 1 to landing 2: approx. 14 steps Landing 2 to upper floor 2: With 2 intermediate levels Steps: galvanized grating Stringers and handrails painted Condition: good Available: from approx. end of Q4/2026 Location: Hamburg Lhsdpfx Aszqz I Uohtok

Year of construction: 2018, condition: good (used), Loading ramps, Butt, BKV 614, 6 tons, non-movable – used: Price at location: now only €7,500 instead of €9,500 (net) Manufacturer: Butt Type: BKV 614 Year of manufacture: 2018 Load capacity: 6,000 kg Driveway with grating Length: approx. 14.41 m Width: approx. 2.88 m Width with stairs: approx. 3.73 m Width of the driveway: approx. 2.77 m Lhodpfx Aezikbzohtsk Height of the ramp: 1.28 m (where the plates rest on the truck loading ramp of the building) The ramp is not mobile – or rather, not movable! Condition: very good Available: immediately or August 2026 Location: Euskirchen

Condition: good (used), Year of construction: 2014, Staircase/stairwell with intermediate landing – used: Price: €2,500.00 (net), dismantled, packaged, and loaded at the location! Item No. 12 Manufacturer: Stow Type: unknown Ledpfx Ahezqz Smjtehk Year of manufacture: 2014 From ground floor to landing: approx. 10 steps (with the 1st step at the level of the landing) From landing to upper floor: 12 steps (with the 12th step at the level of the upper floor) Distance between steps, presumably approx. 18.5 cm (to be confirmed) Width: to be confirmed With intermediate landing Steps: galvanized grating Stringers and handrail painted Condition: good Available: from approx. Q4/2026 Location: Hamburg

Condition: used, Year of construction: 2019, operating hours: 4,240 h, functionality: fully functional, Used Cone Crusher HCU 7/160 After Complete Refurbishment – Available Immediately We offer for sale a fully refurbished cone crusher HCU 7/160 after complete overhaul and replacement of internal wear parts with new ones. The machine is in very good technical condition and ready for immediate operation. Price: EUR 89,900 – complete crushing unit + EUR 16,890 – new hot-dip galvanized supporting steel structure with stairs, walkways, and operator platform Scope of Supply 01 – Complete Crushing Unit with Cone Crusher HCU 7/35-160 Includes: Lhsdey Nxnropfx Ahtek Hydraulic cone crusher HCU 7/35-160 Oil station for crusher setting adjustment and bearing lubrication Common frame for crusher and drive Feed hopper 4 pcs rubber springs (silent blocks) Positive pressure dust protection system for crusher and oil tank (filter + blower) 90 kW drive, 400 V, 50 Hz Automatic control system with visualization Automatic grease lubrication Power control cabinet, Y/D motor starting Refurbishment and Technical Condition Complete general overhaul of the machine New internal wear parts Refurbished electrical control cabinet Ready for immediate operation Robust design suitable for quarries, recycling, and mining operations Optional – New Steel Structure Available completely new: Hot-dip galvanized supporting steel structure Stairs Service walkways Operator platform Structure price: EUR 16,890 Please contact us for more information or a commercial offer.

Condition: excellent (used), Ferno Model 59 T EZ Glide – stair transport chair, 227 kg. Professional evacuation and transport chair by Ferno with EZ Glide system, designed for the safe descent of patients down stairs. Sturdy aluminium frame, complete set of safety straps, foldable components for easy transport and storage. The equipment is functional, well-maintained, and ready for use. Ideal for EMS, fire services, hospitals, and care facilities. Price listed per unit. Ljdpfox N Ic Eox Ahtshk

Condition: excellent (used), Transition / Stairs / Crossover, 3 stairs - used- : Price ex location: 1.950.-€ (net), dismantled, packed and loaded! The position of the stairs on the platform can be changed. Manufacturer: unknown Type: unknown Year of construction: unknown Gratings Dimensions: Platform height: approx. 1.60m Platform width: approx. 1m Lhodpfx Ahjrdfwujtsk Platform length: approx. 3.65m (length outside incl. railing: 3.73m) Length: Stairs: approx. 2.10m Stair width: approx. 90cm Step spacing: approx. 20cm Step depth: approx. 26cm Step width: approx. 80cm Railing height: approx. 1.10m Gap between the landing supports: approx. 2.35m Condition: good - very good Available: immediately Location: Biebergemünd Biebergemünd

Condition: good (used), Year of construction: 2014, Staircase/stairwell with intermediate landing – used: Price: €2,000 (net), disassembled, packed, and loaded at the location! Item No. 4 Manufacturer: Stow Type: unknown Year of manufacture: 2014 Lsdpfx Ahezqz Nletohk Approximately 10 steps from the ground floor to the landing Further data will be determined Width: approx. 1.25 m With intermediate landing Steps: galvanized grating Stringers and handrails painted Condition: good Available: from approx. Q4/2026 Location: Hamburg

Condition: good (used), Year of construction: 2003, The painting unit with heat exchanger and blowing for drying was used in the production of stairs and carpentry elements Lhsdpfjuyy A Djx Ahtjk Paint wall also with extraction in the floor with a total length of about 7 mb equipped with three extraction fans

Condition: good (used), Year of construction: 2004, functionality: fully functional, DOUBLE-ENTRY STORAGE PLATFORM, without access stairs. Dimensions: 4.30 x 19.60 = 84 m2 or 120 m2. PRICE IS FOR THE PLATFORM IN ITS CURRENT STATE. DISASSEMBLY IS POSSIBLE within one month. The sale corresponds to 70% or 100% of the current platform. Inspection before disassembly is mandatory. Lhedjx Rdrlepfx Ahtjk

Condition: good (used), Year of construction: 2014, Storage offices, room-in-room system, 2 stories with stairs, 2 large and one small room – used: Price ex works: €19,500 (net), disassembled, packaged, and loaded! Item 1: Manufacturer: Kleusberg Type: Systemraum Trendline Year of manufacture: unknown, probably 2014 Height: almost 6m Roof accessible, with a maximum load capacity of 100kg Element width: approx. 1.03m Length: approx. 21.40m, the "gap" for the passage is approx. 4.40m long Lodpfezqz D Ajx Ahtshk Depth: approx. 4.24m Ground floor height: approx. 2.86m All offices are closed on three sides and therefore have one side against the hall wall Without flooring Condition: good Available: from approximately Q4/2026 Location: Hamburg