Used Extraction for sale (3,910)

Condition: used, Year of construction: 2015, operating hours: 424 h, type of input current: three-phase, suction capacity: 5,000 m³/h, filter area: 80 m², total height: 2,900 mm, total length: 1,650 mm, total width: 1,700 mm, overall weight: 1,000 kg, NOVUS Air FTower Filtration Tower, 5000 m³/h Industrial welding hall air filtration – suitable for various technological operations in manufacturing plants, primarily metalworking. Top air intake and draft-free bottom air discharge – delivers purified air directly to the workstations. Layered filtration and ventilation principle; the unit does not require duct installation. Kljdpfx Abexg Nx Tocop Cartridge filter inserts – self-cleaning via compressed air pulses during operation. Filter cleaning is controlled by pressure differential – ensures no loss of compressed air. Layered ventilation principle: contaminated air is drawn in from above, filtered, and released at floor level as breathing-quality air, free of drafts, at a velocity below 1.2 m/s – precisely where employees inhale it, covering a wide 270° range. The tower operates according to the layered ventilation method, recommended by trade associations and considered the optimal air circulation method. Year of manufacture: 2015 Operating hours: 424 h Specifications: — Fan power: 5.5 kW — Capacity: 5000 m³/h — Filtration surface area: 80 m² — Filter cartridges: 4 units — Additional final stage F9-class fine filter increases purification efficiency and further protects the fan in case of main filter damage. — 100-liter dust drawer — Very quiet operation: 75 dB(A) — Filtration efficiency: > 99.6 % The unit is in very good technical condition. Warehouse number: 1049

Condition: used, Year of construction: 2014, filter area: 150 m², suction capacity: 15,000 m³/h, The WELDEX FT series of filtration towers has been specially designed for the efficient removal of welding fumes in production facilities. These units are primarily intended for extracting contaminated air during the welding of large or complex metal parts, where conventional fume extraction directly at the source is impractical. Fine particles are captured by M-class filter cartridges, and the filters are automatically cleaned during operation using a pulse jet of compressed air (pulse cleaning). The WELDEX FT filtration tower is positioned at the center of the workspace. Fume-laden ambient air is drawn in at the top of the unit from the surrounding area, filtered, and then returned to the hall draught-free through two side outlets. The three-section dust collection drawer gathers separated contaminants from both the pre-separator chamber and the filter compartment. Welding fume extraction for production halls (workplace ventilation systems) Ideal for all work areas where selective extraction is impractical: - Metal industry - Mechanical engineering - Automotive industry - Vehicle manufacturing - Aircraft construction - Shipbuilding - and many more High-performance welding fume extraction for manufacturing plants No need for ductwork installation Easy to install – ready for immediate use Durable, cleanable filter cartridges = low operating costs Efficient fume extraction using thermal lift from the welding process Compact design = minimal space required Flexible application = can be relocated at any time Brand: ESTA Klodpfoxg Ickox Abcep Model: WELDEX FT-150 Specifications: Motor power: 11 kW Capacity: up to 15,000 m3/h Vacuum: 2,000 Pa Filter surface area: 150 m2 Weight: 1,400 kg Year of manufacture: 2014 Dimensions: Width: 2.10 m x 1.40 m Height: 3.65 m Stock no.: 1031

Condition: good (used), Year of construction: 2006, Previous use : Extraction of graphite dust Protection class IP65 Negative pressure approx. -27m/bar Klodpfx Aoygx Ekebcjp Air flow rate 2650 m³/h Air flow rate at fan 4500 m³/h Motor 2.2 kW .

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 2007.10.191, grinding width: 1,350 mm, grinding belt length: 4,800 mm, workpiece height (max.): 150 mm, grinding belt width: 1,400 mm, Sanding Machine + Dust Extraction Unit TECHNICAL DETAILS Sanding width: 1,350 mm Working height: 880 mm Workpiece thickness: 3 - 150 mm Transport bed: continuous conveyor belt Transport bed drive: 4.0 kW / frequency converter 7.5 kW Feed speed: 3 – 15 m/min Drive, workpiece suction clamping system: 7.5 kW Units: 3 x cross, 1 x longitudinal, 1 x brush Cross and longitudinal sanding units Cross sanding unit – sanding belt dimensions: 4,800 x 150 mm Belt speed: 2–20 m/s Drive power per cross sanding unit: 15 kW Pressure lamella belt dimensions cross sanding: 4,350 x 140 mm Longitudinal sanding unit – sanding belt dimensions: 2,620 x 1,400 mm Belt speed longitudinal sanding: 1.8 – 16 m/s Drive power longitudinal sanding: 15 kW Pressure lamella belt dimensions longitudinal sanding: 1,900 x 1,380 mm Brushing unit Brush roller diameter: 120 mm Drive power: 0.75 kW Air requirement Air requirement, cross sanding units: 91.5 m³/min Air requirement, longitudinal sanding unit: 30.5 m³/min Air requirement, brushing system: 18.0 m³/min Air requirement, conveyor belt extraction: 13.5 m³/min Air exhaust, workpiece suction clamping system: 40.0 m³/min Total air requirement: 193.5 m³/min Total compressed air consumption: 115 m³/h MACHINE DETAILS Total connected load: approx. 80 kW Operating voltage: 400 V Frequency: 50 Hz Main machine dimensions Dimensions (L x W x H): 2,900 x 2,300 x 2,200 mm Weight: approx. 7,000 kg Dust Extraction Unit EA 8 – Machine No.: 2007.10.192 Sanding width: 1,350 mm Working height: 880 – 920 mm Workpiece thickness: 3–150 mm Required air speed: 20 m/s Air requirement: 30.5 m³/min Transport bed drive: 1.1 kW / frequency converter 2.2 kW / 0.75 kW Feed speed: 3–15 m/min Fan drive: 5.5 kW Drive, height adjustment: 0.18 kW Power connection: 7.0 kW Dimensions (L x W x H): 1,100 x 2,200 x 2,200 mm Weight: 1,900 kg EQUIPMENT - Operator terminal - Dust extraction unit EA 8 - Workpiece suction clamping system - Several cross and longitudinal sanding units - Brushing unit Kjdpoyg Exqefx Abcolp

Condition: new, Cyclone Dust, Chip, and Sawdust Extractor Separator CORMAK DC3300 3kW The DC3300 model from CORMAK is a high-performance and robust cyclone dust extractor, designed for efficient air purification in woodworking shops, furniture manufacturing plants, and metal processing facilities. With a cyclone separator, powerful radial fan, and advanced filtration system, the unit ensures effective separation of dust fractions and maintains consistently high operating efficiency over prolonged use. Kjdpfx Asyaqvnobcolp

Year of construction: 2010, condition: used, Centrifugal fan, chip extraction fan, fan, suction, chip blower, high performance fan -Motor power: 5.5 kW -Speed: 2895 rpm -Volume flow: 1060 m³/h -Connection input: Ø 200 mm -Connection output: Ø 115 mm -Dimensions: 775/1000/H1350 mm -Weight: 170kg Ksdpfx Ajn Srvysbcjlp

Condition: used, Radial fan, radial ventilator, radial blower, chip extraction fan, fan, extraction, chip blower, high-performance fan, metal chip extraction fan -Radial fan: metal chip extraction fan with wear plates Ksdpfjrh Niaex Abcolp -Motor: EMK type EC2-HS160M2-2 -Engine power: 15 kW / 2935 rpm -Connection input: Ø 150 mm -Connection output: Ø 150 mm -Base plate: 580 x 470 mm -Total dimensions: 930/820/H1220 mm -Weight: 395 kg

Condition: used, Centrifugal fan, centrifugal fan, centrifugal blower, chip extraction fan, fan, exhaust, chip blower, high performance fan, metal chip extraction fan -Radial fan: metal chip extraction fan with wear plates -Motor: EMK type T3C 160M2-2 built in 2021 -Motor power: 15 kW / 2940 rpm -Volume flow: m³/min / m³/h -Connection input: Ø 150 mm -Connection output: Ø 150 mm -Base plate: 530 x 580 mm / 580 x 470 mm -Quantity: 2x blowers available -Price per piece -Total dimensions: 950/800/H1215 mm / 930/820/H1220 mm Kjdpfxjrh Nido Abcelp -Weight: 395 kg/pc.

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, welding fume filter, welding fume extraction, flue gas extraction fan, extraction filter system Kedpjryaliofx Abcelp -Manufacturer:Oelde, extraction system, extraction filter system, type size 16 -Air flow: 22 m³/min -Engine: 1.85 kW -Speed: 2890 rpm -Individual components/technical data: see photos -Dimensions: 870/480/H1250 mm -Weight: 100 kg

Condition: good (used), radial fan, dust extraction blower, fan, extraction, dust blower -for: paint wall, paint booth -Motor: Explosion-proof -Engine power: 5.0 kW Kodpfx Aoca Iarebcjlp -Speed: 1455 rpm -Inlet connection: Ø 430 mm -Outlet connection: Ø 450 mm -Impeller: Ø 660 mm -Dimensions: 1350/900/H1240 mm -Weight: 236 kg

Condition: used, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: Radial fan type DG 63 b -Motor: Dietz 0.125 kW 2845 rpm -Volume flow: 6 m³/min / 360 m³/h -Connection: inlet Ø 58 mm -Connection: output Ø 75 mm Kljdpfet Rbhzjx Abcsp -Dimensions: 380/250/H360 mm -Weight: 9.2 kg

Condition: good (used), Year of construction: 1998, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Manufacturer: Eurovent, dust extraction fan radial fan type MPR 502 -Motor: AEG 5.5 kW 2860 rpm -Volume flow: 3000 m³/h -Pressure: 3900 Pa Klsdpjrp Ii Uofx Abcjp -Connection: Inlet Ø 305 mm -Connection: Output 220 x 160 mm -Base plate: 415 x 400 mm -Dimensions: 755/750/H770 mm -Weight: 100 kg

Condition: good (used), radial fan, dust extraction blower, fan, extraction, dust blower -Motor power: 0.6 kW -Speed: 2800 rpm -Volume flow rate: m³/h -Pressure: Pa -Inlet connection: Ø 150 mm -Output connection: 150 x 110 mm Klodpeca D Edofx Abcsp -Impeller: Ø 260 mm -Number: 1x fan available Price: per piece -Dimensions: 450/400/H390 mm -Weight: 19 kg

Condition: good (used), radial fan, dust extraction blower, fan, extraction, dust blower -Motor power: 0.37 kW -Speed: 2800 rpm Ksdjdz Umpjpfx Abcolp -Max. volume flow: m³/h -Max. pressure: Pa -Inlet connection: Ø 190 mm -Outlet connection: Ø 190 mm -Impeller: Ø mm -Dimensions: 700/580/H560 mm -Weight: 37 kg

Condition: good (used), radial fan, dust extraction blower, fan, extraction, dust blower Ksdpjdz Umrofx Abcolp -Motor power: 1.1 kW -Speed: 2810 rpm -Max. volume flow: m³/h -Max. pressure: Pa -Inlet connection: Ø 300 mm -Outlet connection: Ø 290 mm -Impeller: Ø mm -Number: 2 fans available -Price: per piece -Dimensions: 970/770/H660 mm -Weight: 46 kg

Condition: good (used), Year of construction: 2001, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: radial fan Kledpfxjvnaabe Abcsp -Motor: VEM 3,6 kW 1430 U/min Ex protected -Fan wheel: Ø 580 x 180 mm -Connection: inlet Ø 395 mm -Connection: Output 280 x 485 mm -Dimensions: 825/670/H825 mm -Weight: 118 kg

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding smoke filter, welding smoke extraction, smoke gas extraction fan, filter system, Cartridge dust extraction system -Filter system: -Filter frame: 2190/1460/H2080 mm -Vibration motor: 0.25 kW -Funnel frame: 2235/1440/H2520 mm -Opening: Ø 390 mm / 500 x 220 mm -Individual components: see photos -Weight: 200 kg / 590 kg Kedpfx Abewrb I Hjcslp

Condition: good (used), Year of construction: 1988, Radial fan, radial blower, radial fan, chip extraction blower, fan, extraction, chip blower, high-performance fan -Manufacturer: Krämer, Radial fan, chip extraction blower, fan type VFM-K -Volume flow rate: 4500 m³/h Kodpfx Abswrb Srjcelp -Motor: AEG 4 kW 2870 rpm -Inlet connection: Ø 250 mm -Output connection: 235 x 210 mm -Fan wheel: Ø 400 x 160 mm -Overall dimensions: 705/610/H785 mm -Weight: 95 kg

Condition: good (used), Radial fan, radial ventilator, radial blower, chip extraction fan, fan, extraction, chip blower, high-performance fan -Manufacturer: Schuko, radial fan chip extraction fan type K 350 -Volume flow: 9690 m³/h -Total pressure: 3038 Pa -Motor: AEG 18.5 kW 1460 rpm -Connection input: Ø 350 mm -Connection output: Ø 360 mm -Base plate: 1000 x 340 mm -Fan wheel: Ø810 x 200 mm -Dimensions total: 1220/785/H1500 mm -Weight: 396 kg Klsdpfjv Ni Uwex Abcsp

Condition: good (used), Radial fan, chip extraction blower, fan, extraction, chip blower -Engine power: approx. 22 kW -Speed: not visible -Volume flow: not visible Kjdpfx Aob Iqf Usbcelp -Inlet connection: Ø 280 mm -Outlet connection: Ø 450 mm -Dimensions: 1050/900/H920 mm -Weight: 280 kg

Condition: used, Year of construction: 2008, Radial fan, dust extraction fan, fan, extraction, dust blower -Manufacturer: Ferrari, Radial fan in soundproof container -Container manufacturer: Wagner Lufttechnik -Engine: Siemens, 11 kW -Speed: 1460 rpm -Pressure and volume performance: unfortunately not visible -Fan wheel: Ø 700 mm -Connection input: Ø 790 mm -Connection output: 700 x 500 mm -Quantity: 2 blowers available -Price per piece Kodpfjfrpnwsx Abcolp -Dimensions: 2130/2135/H2480 mm -Weight: 1325 kg

Condition: used, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: radial fan -Motor: Loher type eAL 100L2B-4 2.5 kW 1420 rpm Ex protected -Volume flow: m³/h -Number: 2x fan available -Price per piece -Dimensions: 730/730/H730mm -Weight: 92 kg/pc. Kljdpfxot Hy T Us Abcep

Condition: used, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan Klodpst Rbhusfx Abcjp -Dust extraction fan: Radial fan type DN 160 -Motor: Dietz 1.0 kW 2850 rpm -Volume flow: 30 m³/min / 1800 m³/h -Connection: inlet Ø 140 mm -Connection: Output 135 x 135 mm -Dimensions: 470/300/H365 mm -Weight: 17.7 kg

Condition: used, Year of construction: 1996, Radial fan, centrifugal fan, centrifugal blower, chip extraction fan, fan, suction, chip blower, high performance fan Ksdpfxeqvp N Dj Abcolp -Manufacturer: Reitz, radial fan chip extraction fan type MXE 020-018030-00 -Engine: Dutchi DM 160 MX2 15 kW -Speed: 2935 rpm -Volume flow: 180 m³/min / 10800 m³/h -Connection input: Ø 245 mm -Connection output: Ø 390 mm -Dimensions: 1460/1160/H1500 mm -Weight: 392 kg

Condition: good (used), Year of construction: 1998, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: Radial fan type Kedetz Hubepfx Abcslp -Motor: Loher 3.5 kW 955 rpm Ex protected -Volume flow: m³/h -Connection: inlet Ø 500 mm -Connection: Output 400 x 500 mm -Dimensions: 1160/880/H950 mm -Weight: 153 kg