Used Extruder Sheeter for sale (523)

Condition: reconditioned (used), stock-No. 2452 1 used, partly overhauled and functionally tested pelletizing line capacity up to 300 kg/h depending material, equipped with: Kreyenborg Force-feeder SW 100, motor 7,5 kW Extruder BKG single-screw Ø 100 mm – 35 LD, motor 132 kW – AC Screw speed up 143 r.p.m. screw depth 14 mm heating power installed 35 kW 1x athm. venting port with „Stuffer“ * Kreyenborg K-SWE 160 RS screen-pack-changer back-flush self-cleaning with filter surface 244 cm² BKG underwater pelletizing unit AH 300, complete with : diverter-valve , hydraulic unit pelletizer, motor 4 kW incl. die-plate and knife-holder Water pump 2,2 kW By-Pass System, Process water tank heating power 9 kW Heat-exchanger BKG pellet spin-dryer TWE 300 with motor 3 kW control-board and operation panel OPTIONAL against additional price Kfedpjh Eyd Rsfx Aanoa ᐳ * Vacuum pump ᐳ pellet classifier sieve, conveying, Big-Bag Station ᐳ chiller – cooling unit More pelletizing lines ex workhop Wuppertal-Germany available, ask for our most recent machine-stock-list or visit us, you´re welcome.

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, screw diameter: 40 mm, machine/vehicle number: DE27692, TECHNICAL DETAILS Screw diameter: 2 x Ø 40 mm L/D ratio: 44D Drive power: 100 kW Processable materials: PE, PP, PS, ABS EQUIPMENT - Co-rotating screw conveyor - Degassing system Kedpfx Aaswh R A Sonjfa - Segmented screws and barrels - Connection for side feeder

Year of construction: 2013, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 20910-01, Unused Hosokawa Bepex model BX 150 stainless steel (AISI 316) basket extruder for low pressure extrusion. Products with loose structure, large surface and good forming properties are produced with this machine. The product consists of a paste of low flow characteristics and low moisture content. The product to be processed is transported by the inlet into the machine. In the product area are two rotors which works in oposite directions to each other. - The upper 2-arm rotor with angle rotor and additional stirrers mixes and conveys the material down. Rotor is driven through gearbox by 0.55 kW, 60 Hz electrical motor, adjustable speed from approx. 14 - 139 rpm. - The lower 3-arms rotor is equipped with curved arms and rotor knives. Through the lower 3-arm rotor the product is compressed and forced through a cylindrical screen basket. The diameter of the granules results from the perforation diameter in the screen basket. Rotor is driven through gearbox by 3.0 kW, 60 Hz electrical motor, adjustable speed from approx. 15 - 144 rpm. Includes (2) extrusion screens 2 mm dia x 1.2 mm thick, switchboard with integrated control panel. Mounted on stainless steel frame with (4) wheels. Kodpfxjt Tvx Te Aanofa

Year of construction: 1997, operating hours: 76,200 h, condition: good (used), This WEBER extruder is in machine storage at Plastima Used Machinery. The machine is from 1997 and is in great condition. Kfedpetpg D Uefx Aansa Make: Hans Weber GmbH Model: NE 7 048 Screw type: single screw Year of construction: 1997 Propeller Ø: 75mm Working hours: 76,200

Year of construction: 1996, condition: ready for operation (used), Output: 140-180kg/h, screw diameter: 50-103mm, screw length: 1300mm, max. screw rotational speed: 43/min, connected load: 25kW, operational hours counter: 62,590h, including dosing unit with hopper, vacuum pump, cylinder cooling aggregate and screw temperature control. Kfodpjhz Dyaofx Aanea

Year of construction: 2003, condition: refurbished (used), Stock-No. 2086 twin-screw compounding extruder BERSTORFF type ZE 60 A - UT screw size 2 x 64 mm - 32 LD Capacity 800 kg/h depening material specifications Drive from 197 kW up to 350 kW possible , optional by appoinment L/D 34 - 40 LD , by appointment > due to your material formula needs drive up to 230 kW - 350 kw optional against add.price 1x venting port new control board Kfjdpfoc Rukwsx Aanea optional - equipment against additional price: screen-pack-changer pelletizing material feeding , loss-in-weight gravimetrci blenders pellet-classifier and more Please inform which equipment you need for a detailled quotation, thank you. All ex stock available

Year of construction: 2007, condition: excellent (used), functionality: fully functional, Twin-screw extruder Ref. No.: DE27678 Manufacturer: Leistritz Type: ZSE 27 MAXX Year of manufacture: 2007 Screw diameter: 2 x Ø 27.0 mm L/D: 40D Drive: 33.6 kW Details: Co-rotating, segmented screws and barrels, 1 x atmospheric degassing, 1 x vacuum degassing including vacuum pump Kodpfxst Eqvdj Aanjfa Options: Granulation, dosing, side feeder This offer doesn't meet your requirements? Please visit our website: "Plama Engineering" or send us your detailed inquiry. We have the right solution for almost every budget.

Year of construction: 1997, operating hours: 58,668 h, condition: good (used), This WEBER extruder is in machine storage at Plastima Used Machinery. The machine is from 1997 and is in great condition. Make: Hans Weber GmbH Model: NE 7 042 Kfedjtpg Dnjpfx Aanea Screw type: single screw Year of construction: 1997 Propeller Ø: 75mm Working hours: 58,668

Year of construction: 1979, condition: ready for operation (used), Was used for PVC, PUR and TPEV, with control cabinet, used screws and one used cylinder, with documentation, was maintained regularly. Kjdpelp N Evofx Aansfa

Year of construction: 1980, condition: reconditioned (used), machine/vehicle number: 2489, stock-No.:2489 1 used, functionally tested Single-Screw-Extruder, ready for trial-run: Manufacturer: KUHNE Germany Type: ES 60-24 Screw- Ø 60 mm – 24 LD Main-feed zone can be chilled( cooling unit not included ) Screw speed up to 100 r.p.m. Extruder Motor: 25,5 kW – 63 A – DC 4x Heating zones with air-cooling 3x additional heating zones for down-stream equipment as: die-head, tools, screen-pack-changer, etc. control board Relating down-stream-equipment as screen-pack-changer, pelletizing etc. against additional price, details upon request. Kfodpfx Aaod Sg Hcsnja More extruders ex stock available, visit us or ask for our most recent Machine-Stock-List. You´re welcome.

Year of construction: 2006, condition: excellent (used), Name: Used twin-screw extruder Plama number: DE27676 Kfjdoqqh Unepfx Aanea Manufacturer: Leistritz Type: ZSE 130 GL Year of manufacture: 2006 Screw diameter: 2 x 130 mm Length L/D ratio 35 D Motor: 500 KW Material: PE, PP, PS, ABS + fillers Capacity: 1000 - 2000 kg - (depending on material) Control system: Currently without control cabinet, but can be offered separately Details: Co-rotating, degassing, segmented screws and barrels Options: Screen changer, dosing, granulation, control cabinet This offer doesn't meet your requirements? Please visit our website: "Plama Engineering" or send us your detailed inquiry. We have the right solution for almost every budget.

Condition: good (used), functionality: fully functional, Working from production, has always run with an 800 mm extrusion head for producing HDPE pipes. Kedpfxswr Db Ns Aanofa

Year of construction: 2000, condition: used, Rotational speed: 227/min, power: 31kW, heating output: 7.8kW, length: 1952mm, width: 840mm, height: 1920mm, weight: 820kg. Kedoduyyzspfx Aansfa

Year of construction: 2012, condition: excellent (used), Category: Twin-screw extruder Number: DE27691 Manufacturer: Feddem Type: DEC 72 MTS Year of manufacture: 2012 Capacity: 400 – 700 kg/h Screw diameter: 2 x Ø 72.0 mm L/D: 32D, including housing extension to 42D Drive: 168 kW Material: PE, PP, PS, ABS // Additional details: Co-rotating extruder, degassing – 2 side feeders, 6 Schenk gravimetric dosing units, ECON EUP 600 underwater pelletizer, Trendelkamp classifying screen, degassing, vacuum pump, BSG control system Kedpfovk Sgfsx Aanefa Very nice complete system with only approximately 3,500 operating hours. The offer doesn't meet your requirements? Please visit our website: "Plama Engineering" or send us your detailed inquiry, we have the right product for almost every budget.

Year of construction: 1991, operating hours: 32,000 h, condition: refurbished (used), • One pair of original WEBER screws (excellent condition, including measurement report • One pair of non-original screws • Gearbox inspected and partially revised by WEBER Kfsdpfswaxuaex Aanja • Control upgraded to WPS control • Output on PVC around 700 kg/hour

Year of construction: 2016, condition: ready for operation (used), Control panel: Siemens SIMATIC HMI, connected load: 80kW, weight: 1.85t, operating hours: approx. 4500h, with Kreyenborg feed hopper, year of manufacture: 2017, and Trendelkamp screen changer. Documentation is complete, on-site inspection is possible. Kfodpfxov Uz Aws Aansa

Year of construction: 2009, operating hours: 22,105 h, condition: excellent (used), Twin-screw extruder Ref. No.: DE27684 Kfjdpfx Aoruqgqsanea Manufacturer: Leistritz Type: ZSE 18 HPe Year of manufacture: 2009 Screw diameter: 2 x Ø 17.8 mm L/D: 40D Drive: 9.4 kW Details: Co-rotating, vented, segmented screws and barrels, including single-stage volumetric Brabender metering This offer doesn't meet your requirements? Please visit our website: "Plama Engineering" or send us your detailed inquiry. We have the right solution for almost every budget.

Year of construction: 1989, operating hours: 24,048 h, condition: good (used), machine/vehicle number: DS 85 777, Brand Hans Weber Maschinenfabrik GmbH Type DS 8.7 Serial number DS 85 777 Type Screw Double screw Year of manufacturing 1989 Working hours 24.048 H Kjdjvuzqzjpfx Aanefa Screw diameter 87 mm Connection Load 90 kW

Year of construction: 1990, condition: ready for operation (used), A total of three extruders including throughput measurements (scales), as-new barrels (2018) and overhauled screws are available. Total extrusion capacity: approx. 100kg/h. 1) DC smoothbore extruder, output: 17kW, machine dimensions X/Y/Z: approx. 2300mm/600mm/1100mm. 2) DC smooth tube extruder, power: 32kW, machine dimensions X/Y/Z: approx. 3000mm/700mm/1200mm. 3) DC grooved barrel extruder, output: 49kW, machine dimensions X/Y/Z: approx. 3000mm/700mm/1200mm. On-site inspection is possible. Kfedsvw Aqhepfx Aanja

Year of construction: 2000, condition: excellent (used), Category: Twin-screw extruder Number: DE27669 Manufacturer: Coperion - Werner & Pfleiderer Kfjdon Nxl Sjpfx Aanoa Type: ZSK 40 Year of manufacture: 2000 Capacity: 250 – 450 kg/h Screw diameter: 2 x Ø 40.0 mm L/D: 40:1 Motor: 110 kW Material: PE, PP, PS, ABS // Additional details: Co-rotating extruder, degassing with segmented screws and barrels Includes a completely new control cabinet This offer doesn't meet your requirements? Please visit our website: "Plama Engineering" or send us your detailed inquiry. We have the right solution for almost every budget.

Year of construction: 1993, operating hours: 1,04,599 h, condition: good (used), Brand Cincinnati Milacron Austria GmbH Type CMT 35 Machine number 2005723/10 Type Screw Conical Double Screw Year of manufacturing 1993 Machine hours 104,599 hours Kjdpfevl Hzgox Aansfa Screw Diameter 35mm Dimensions (LxWxH) 3200 x 1500 x 1720 mm Weight (approx) 2000kg

Year of construction: 2003, condition: good (used), functionality: fully functional, screw diameter: 27 mm, TECHNICAL DETAILS Capacity: 10 – 40 kg/h Screw and Barrel Technology Design: Synchronous Screw center distance: 23 mm Screw diameter: 2 × Ø27.0 mm Kneading disc and kneading block diameter: 27.0 mm Screw material: 1.2379 Cylinder diameter: 27.2 H8 Cylinder material: 1.8550 nitrided, nitriding layer 0.5–0.6 mm Screw length: 40 D Screw torque: 2 × 100 Nm Screw speed: max. 500 rpm Drive Drive type: DC shunt motor Drive power: 10.5 kW Motor speed: max. 2,690 rpm Gear ratio: i = 5.38 Power transmission: Clutch Heating and cooling system Number of heating zones: 11 Heating capacity: 9.85 kW Number of cooling zones: 9 Cooling type: ZIK (Intensive Cylinder Cooling) Filling zone cooling: Water Filling zone cooling water consumption: 30 l/h Process parameters Melt pressure: max. 300 bar Melt temperature: max. 350 °C Injection height: 1,050 mm Dimensions and weight Weight: approx. 950 kg Length: 2,630 mm EQUIPMENT - Segmented screws and barrels - Synchronized technology - Degassing Kfsdpfov U Da Sex Aansa

Year of construction: 1998, operating hours: 64,082 h, condition: good (used), This Cincinnati extruder is in machine storage at Plastima Used Machinery. The machine is from 1999. Special note: the extruder lacks the gearbox. – Brand: Cincinnati – Model: Titan 45R-APC – Construction year: 1998 – Conical double screw extruder – Screw Ø: 45 mm Kodpfx Aeq Tr T Reanefa – Working hours: 64.082

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, screw diameter: 27 mm, machine/vehicle number: DE27688, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Screw diameter: 2 x Ø 27.0 mm L/D ratio: 40D Drive power: 33.6 kW Processable materials: PE, PP, PS, ABS EQUIPMENT - Co-rotating - Segmented screws and cylinders Kfedpfxsv Dkrao Aanoa - Atmospheric degassing - Vacuum degassing including vacuum pump

Year of construction: 1983, condition: good (used), This WEBER extruder is in machine storage at Plastima Used Machinery. The machine is from 1983 and is in fine condition. - Brand: Hans Weber GmbH - Model: ZE 30 - Year built: 1983 Kodjq Tr Tbepfx Aanjfa - Single-screw extruder - Screw Ø: 30 mm - Ratio: 20 L/D