Used Veneer Slicer for sale (744)

Condition: good (used), Marel SC90 Salmon Slicer Salmon Slicer Model: SC90 Silk Cut 11 D Cut slicer Single Lane With adjustable slice thickness and angle Up to 90 slices per minute Slice angle: 8-20 degree Dcedpfov Dmz Dox Anqji Dual frequency 50/60Hz

Condition: excellent (used), functionality: fully functional, Italpresse UT/8 veneer press Shelf length: 3500 mm Shelf width: 1300 mm Press with 8 cylinders Shelves heated with water from a boiler. Dedpezi Eg Eefx Anqjci

Condition: new, PRICE 5.000 EUR Manual slicer for prosciutto and other permanent cured meat products Maximum cutting width 250 mm Maximum product height 180 mm The possibility of adjusting the height of the stand Setting the thickness of the slice from 0 to 2.5 mm Dsdsu Abdhepfx Anqsci Hand wheel to blade ratio 1:3

Condition: new, PRICE: 1500 EUR Automatic slicer Ital Form Dimensions: 480x650x530mm Djdpfxjuu H Dpo Anqoci Electric power: 0.37 kW Voltage: 220V 50Hz Cutting thickness: 0-6mm Blade diameter: 300mm Weight: 65 kg

Condition: excellent (used), Year of construction: 1996, goose neck 920 mm feed speed 20 m/min veneer thickness ca. 0,4 - 2,0 mm motor 400 V, 50 Hz,, 3 PH incl. manual incl. glue thread Advise used machines: Dcodpog Nn E Nefx Anqji • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: good (used), Year of construction: 1989, Pressing area 2550 x 1350 mm Number of press cylinders #6 Total pressing force 140 t Opening width approx. 400 mm Operating voltage: 3 x 400 V + N, 50 Hz. Total connected load approx. 26 kW Space requirement (L x W x H) approx.: 3400 x 1600 x 2000 mm Dodpfxswd N Rms Anqeci Weight: approx. 5500 kg Hydraulic hot plate press Down-piston design Electric hot platens Pressing pressure continuously adjustable via pressure switch Hydraulic pump Central control panel with all operating and Digital temperature display for both hot platens Press cycle counter Safety ripcord Rack compensation Main switch Note for used machines: • Errors in technical specifications and subject to prior sale. • Subject to change without notice. • Prices quoted are for pickup from the location - free shipping! • The machines have been cleaned and functionally tested. • All machines are sold as seen, without any warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only respond to inquiries if you provide your address and telephone number!)

Condition: new, Technische Daten: Abmessungen der Heizplatten 3000 x 1300 mm Anzahl der Heizplatten 2 # Anzahl der Presszylinder 6 # Pressdruck 90 t (900 kN) Zylinderdurchmesser 70 mm Anzahl der Etagen 1 # Etagenöffnung ca. 400 mm Anschlussleistung ca. 21,0 kW ELEKTRISCH BEHEIZBARE TISCHE (ELKOM - Deutschland) Der Tisch besteht aus 2 kalibrierten Aluminiumplatten, in denen die elektrischen Widerstände verlegt sind. Die maximale Betriebstemperatur ist 120 Grad C. Im am Tisch wird eine Dämmplatte montiert, die zur Wärmeisolierung gegenüber der Presse dient. Der Bau des Tisches und die präzise Verarbeitung, die von spezialisierten Firmen vorgenommen werden, gewährleisten eine sehr gleichmäßige Verteilung der Temperatur. Die Heizplatten sind mit speziellen Halterungen an der Presse befestigt um die Wärmeausdehnung zu erlauben, außerdem erleichtern sie die Wartung und das Auswechseln. Spezifischer Betriebsdruck des Tisches bis zu 10 kg/cm2 Max. Temperatur der Heizplatte 120 Grad C Arbeitstemperatur 90 Grad C Schuetzsteuerung Waermeschutzschalter Die Zylinder sind aus spezial geschweissten und gross dimensionierten Stahlrohren hergestellt. Hydraulik: Kompakte hydraulische Einheit Fabrikat HAWE aus Deutschland. Pumpe fuer Schliessphase und Druckaufbauphase. Automatische Nachdruckverstellung Leistung der hydraulischen Einheit 3 kW Bewegung des Presstisch von unten nach oben. Pressengestell: Das Pressengestell besteht aus einer schweren verwindungssteifen und spannungsfrei geschweissten Stahlkonstruktion. Beide Presstische sind aus HEA-Profilen geschweisst. Die Bearbeitung der Baugruppen erfolgt auf CNC-Barbeitungsmaschinen. Bewegung des Presstisches mit Zahnstangen und Parallelfuehrung an 2 Ecken des Presstisches aus selbstschmierenden Material. BEDIENTAFEL mit Display und Tastatur: Bedientafel Siemens mit 7-Zoll-Farb-Touchscreen mit Verbindung zum Ethernet- Netzwerk für den Fernwartungsservice. Das System ist mit einer eigenen Software ausgestattet durch die die Bedienung der Presse einfach und intuitiv erfolgen kann. Sie können folgende Parameter programmieren, abrufen und ändern: Dedefh Tmmopfx Anqoci - Automatische Regelung des hydraulischen Drucks aufgrund des Werkstückgrösse und des gewünschten spezifischen Drucks. Das System reguliert den Druck der Zylinder automatisch und der Bediener muss keine Berechnungen mit Grafiken oder Tabellen anstellen. - Möglichkeit zum Speichern von bis zu 100 Arbeitsrezepten (Temperatur, spezifischer Druck, Pressdauer, Plattengrösse). - Direkteinstellung des hydraulischen Drucks der Zylinder mit digitaler Kontrolle aufgrund der Grafik. Dieses System kann alternativ zur automatischen Regulierung verwendet werden, falls Sie lieber mit der herkömmlichen Methode arbeiten. - Elektronische Regelung der Pressdauer - Elektronische Kontrolle der Temperatur der Tische - Automatische Wiederherstellung des Drucks aufgrund des Nachgebens des Materials. - Komplette Diagnostik und Störungsanzeige mit Meldungen am Display. WEITERE AUSSTATTUNG UND MERKMALE DER PRESSE Haken zum Anheben der Maschine um das Laden/ Entladen der Maschine beim Transport zu erleichtern. Nivelliervorrichtungen die an den Füssen der Presse montiert sind. In die Presse integrierte Schalttafel; dadurch sind weniger Aussenkabel notwendig, die vorhandenen sind jedoch auf jeden Fall angemessen geschützt. inkl. Option: Fehlbelegungsüberwachung (Ebenheitskontrolle)

Condition: excellent (used), Year of construction: 1993, OTT Model JU 2513 Djdpfx Anexgpaqoqeci Hydraulic veneer press with electric heating plates Under-piston design BUSSE electric heating plates Central control panel with all operating elements Analog temperature display for both heating plates Pressing pressure infinitely adjustable via pressure switch device Main switch Two-stage hydraulic pump with automatic switching valve from low to high pressure Emergency safety pull cord Rack compensation Stroke limitation CE compliant Press area: 2500 x 1300 mm Number of press cylinders: 4 Total pressing force: 70 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 20.3 kW Required space (L x W x H): approx. 2900 x 1250 x 1900 mm Weight: approx. 3200 kg

Condition: used, Year of construction: 1998, Plate size: 2500 x 1300 mm Total clamping force: 70 tons Button operation Opening: 400 mm Cylinders: 4 Dedpfszi Avksx Anqoci Motor power: 0.75 kW Gold-anodized heating plates Double safety release cord with rack and pinion parallel guidance Dimensions: 3050 x 1700 x 1910 mm Storage location: Supplier

Condition: used, max. veneer thickness: 2.0 mm min. veneer thickness: 0.4 mm Djdpfx Anoxgqmxoqeci Joining material: glue thread with hot air heating Compressed air required: yes Disc: Yes, for transporting the veneer over the veneer table Control via foot pedal Machine type: floor model Feed speed: 7 m/min Stand extension: 900 mm Weight approx.: 185 kg Dimensions: 1400 x 500 x 1680 mm Storage location: Nattheim

Condition: excellent (used), functionality: fully functional, SIPA veneer press with shelf, 2500×1200 Dcodpfx Aezganxonqji Shelf length: 2500mm Shelf width: 1200mm Press with 4 hydraulic cylinders Shelves heated with water from the boiler

Year of construction: 2025, condition: new, functionality: fully functional, "Columbus Vacuflex" Vacuum Bag – Available Immediately! (Professional vacuum bag for a wide range of vacuum technology applications) The COLUMBUS Vacuflex is a robust and versatile vacuum bag designed for applications such as vacuum form bonding, veneering, coating, and laminating workpieces made of wood and wood-based materials. Thanks to its flexible construction, the vacuum bag is particularly suitable for workpieces that, due to their size or geometry, cannot be processed, or can only be processed to a limited extent, in conventional vacuum presses. Djdpfx Anezhtaqoqeci The fabric-reinforced and durable material ensures a long service life, even under demanding professional use. At the same time, the vacuum bag allows for easy handling and can flexibly adapt to various workpiece shapes. With the COLUMBUS Vacuflex, even very large or complex workpieces can be efficiently produced. This makes the vacuum bag ideal as a standalone tool for smaller production environments as well as a valuable addition to existing vacuum presses, significantly broadening the scope of applications. Technical Specifications • Robust, fabric-reinforced vacuum bag • High flexibility for a wide variety of workpiece shapes • Suitable for form bonding, veneering, and laminating • Ideal for large or complex workpieces • Simple integration into existing production processes • Perfect as an accessory for vacuum presses The COLUMBUS Vacuflex is developed and manufactured directly by the OEM and is designed for long-term use. High-quality materials and meticulous workmanship ensure exceptional reliability and long service life.

Year of construction: 2025, condition: new, functionality: fully functional, VACUFLEX Vacuum Bag – More Possibilities Without Major Investment Would you like to carry out veneer work or form bonding – but without a significant investment in a press? Then this VacuFlex Vacuum Bag is the perfect solution. Dcedpfx Anszhr Umsqei With this, you can: - easily bond and (shape-) veneer layers - work flexibly and efficiently - accept new orders - economically produce even one-off pieces This means for you: More possibilities in your workshop – without requiring extra space or incurring high fixed costs. Condition: Ready for immediate use Especially interesting for: - Smaller businesses - Getting started with vacuum technology - Supplementing existing equipment

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, input voltage: 230 V, DGUV certified until: 08/2027, type of input current: AC, control voltage: 24 V, input frequency: 50 Hz, space requirement height: 1,434 mm, space requirement length: 714 mm, space requirement width: 603 mm, Rotary knife cutting machine JAC Model: VVL Slim Compact machine Adjustable cutting thickness from 5 to 25 mm Oil-free cutting 110 to 130 slices per minute Ergonomic and hygienic Increased safety Dodpfozixdqjx Anqoci Connection: 230 V, 1.1 kW Dimensions: 603 x 714 x 1434 mm (W x D x H) Used machine

Condition: good (used), Code: 0120 Brand: ORMAMACCHINE Model: NPC/3000S - CE Standard Hot press for wood, veneer, wood panels, coated panels, veneer, composite materials, cork, aluminium and various materials - CE Standard Platen dimensions mm 3000 x 1300 Thrust ton 70 N° 6 pistons Opening mm 400 Dcodpfx Aszil Ipsnqsi Motor Hp 2 Hot water heating by boiler Overall dimensions: mm 3600 x 1550 x 1900 h Weight kg 3500

Condition: used, The Treif Puma CE-F is a professional industrial meat slicing machine designed for high-volume meat processing operations. With a cutting performance of up to 400 cuts per minute, it delivers fast, accurate, and consistent portioning of various meat products. The machine is suitable for processing fresh, chilled, and slightly frozen products down to -4°C. Its robust construction and powerful drive system ensure reliable operation, high productivity, and excellent cutting precision. Technical Specifications: Manufacturer: Treif Model: Puma CE-F Type: Industrial Meat Slicer Cutting Capacity: Up to 400 cuts per minute Product Temperature: Down to -4°C Power Supply: 230/400 V, 50 Hz, 3 Phase Power Rating: 3.4 kW Current Consumption: 16 A Dcedpszd E Swjfx Anqji Chamber Dimensions: 235 x 220 mm Machine Dimensions: 1870 x 880 x 1450 mm Weight: 285 kg Application: Slicing and portioning meat, steaks, chops, pork belly, and other food product

Condition: new, PRICE 5.000 EUR Manual slicer for prosciutto and other permanent cured meat products Dodpfxeu Abb To Anqoci Maximum cutting width 250 mm Maximum product height 180 mm The possibility of adjusting the height of the stand Hand wheel to blade ratio 1:3

Condition: new, Manual slicer for prosciutto and other permanent cured meat products Maximum cutting width 250 mm Maximum product height 180 mm The possibility of adjusting the height of the stand Dedpfezd Dxvex Anqsci Hand wheel to blade ratio 1:3

Condition: excellent (used), Year of construction: 1998, I sell Polymac Rubber edgebander little used, like new. Dedpfouvdzuox Anqjci

Condition: used, Year of construction: 1979, Pressing area: 2200 mm x 1100 mm Opening: 360 mm Heating: electric Dsdpfx Anjy A Hkbjqeci Plate surface: aluminium Emergency stop: no Pressing force: 65 t Number of cylinders: 4 Power consumption: 21 A Machine length: 2500 mm Machine width: 1300 mm Weight: 2600 kg

Condition: used, Year of construction: 1992, Cutting length: 3100 mm Dcedpfx Anoyl Tiujqsi Workpiece clamping: pneumatic

Condition: used, Year of construction: 1989, Pressing area: 2500 mm x 1100 mm Opening: 400 mm Heating: electric Plate surface: Aluminium, gold anodized Emergency stop: yes Dcedpeyl Tinjfx Anqji Pressing force: 65 t Number of cylinders: 4 Current consumption: 22 A Machine length: 3000 mm Machine width: 1300 mm Weight: 3000 kg

Condition: used, Year of construction: 1976, Pressing area: 2500mm x 1250mm Opening: 360mm Top platen heating: electric Bottom platen heating: defective Platen surface: aluminum, anodized Pressing force: 90t Dcjdpfsx Edl Eox Anqsi Number of cylinders: 4 Power consumption: approx. 33A Machine length: 3000mm Machine width: 1500mm Weight: 4000kg

Condition: used, Year of construction: 1997, Column reach: 630 mm Feed rate: 7 m/min Djdjwbqi Sjpfx Anqsci

Condition: used, Cutting length: 3050 mm Dcodpfsm H Uxysx Anqei Workpiece clamping: handwheel Extraction system: yes