Used Faceplate for sale (614)

Condition: good (used), Year of construction: 1963, functionality: fully functional, Single-Column Vertical Turret Lathe | Jungenthal DK 1400 The machine was overhauled in 1996, recently cleaned, and is in good condition. Bljdpfx Aoyft Ahsiajp - Faceplate diameter: 1,200 mm - Swing diameter: 1,500 mm - Turning height: 1,300 mm - Cross slide travel: 800 mm - Side slide horizontal traverse: 550 mm - Heidenhain Positip 855 digital readout - New operator panel - Various accessories Inspection is possible at any time by appointment.

Condition: good (used), Year of construction: 1970, functionality: fully functional, Single Column Vertical Turning Lathe | Froriep DS 14 NC The machine was overhauled in 2009, recently cleaned, and is in good condition. - Table diameter: 1,400 mm - Swing diameter: 1,600 mm - Turning height: 1,500 mm - Siemens control type 840 D - Automatic tool changer - Workpiece weight: 6,500 kg Bedpfoyft S Asx Aiaelp - Vertical slide travel: 1,000 mm - Spindle speed: 10–315 rpm - Feed rate: 3,600 mm/min Inspection is possible at any time by prior arrangement. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Froriep | DS14 | DS14NC

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, turning diameter over cross slide: 710 mm, turning length: 2,000 mm, turning diameter: 1,000 mm, spindle bore: 128 mm, rapid traverse X-axis: 5 m/min, rapid traverse Z-axis: 2 m/min, rotational speed (min.): 6 rpm, rotational speed (max.): 1,600 rpm, total height: 2,250 mm, total length: 5,800 mm, total width: 2,005 mm, quill travel distance: 280 mm, quill diameter: 125 mm, swing diameter over cross slide: 710 mm, torque: 4,260 Nm, overall weight: 10,100 kg, Equipment: documentation/manual, - Swing diameter over bed: 1000 mm - Swing diameter over cross slide: 710 mm - Feed rate in X, Z axes: 0.01–50 mm/rev - Feed speed in X/Z axes: 5/2.5 m/min - Rapid traverse in X/Z axes: 10/5 m/min - Feed force in X/Z axes: 20,000/12,500 N - Constant cutting speed: 1–9999 m/min - Distance between centers: 3300 mm - Faceplate diameter: 900 mm - 3-jaw chuck diameter: 500 mm - Bed width: 560 mm - Cross slide travel: 540 mm - Top slide travel: 250 mm - Metric thread pitch: 0.1–400 mm - Spindle nose: KK 11 DIN 55027 - Number of motor gear stages: 2 - Spindle speed range (first gear): 6.3–360 rpm - Spindle speed range (second gear): 28–1600 rpm - Spindle bearing diameter (front): 170 mm - Spindle bore diameter: 128 mm - Spindle internal taper: 136 metric - Tailstock quill diameter: 125 mm - Tailstock quill stroke: 280 mm - Tailstock quill internal taper: Morse 6 (MK6) - Cross slide dimensions (L x W): 1005 x 320 mm - Top slide width: 200 mm - Tool cross-section per DIN 770: 40 x 25 mm - Main drive power (60%/100% duty): 46/37 kW Bljdpfxoya Dz Dj Aiajp - Main drive torque (60%/100% duty): 5300/4260 Nm - Total power requirement: 60 kVA - Power supply: 400 V - Control cabinet dimensions (L x W x H): 1800 x 500 x 1600 mm - Machine dimensions (L x W x H): 5800 x 2005 x 2250 mm - Machine weight: approx. 10,100 kg CNC controller: SIEMENS SINUMERIK - Toolholder: MULTIFIX type D - AC servo drives - Reliable stepless AC main drive - Work area lighting

Condition: used, Giddings & Lewis 48 Inch CNC Vertical Borer Fanuc 18i-t control Bedpfxjymc N Hj Aiaslp 48 inch hydraulic chuck Approx 1.5m under rail to table. Hydraulic turret Swarf conveyor Recent full machine service including; removing Timken bearing and sending for preload test, full refurbishment of oil lube system including replacement of brass oil outlets on table.

Condition: like new (used), Year of construction: 1970, turning height: 4,000 mm, workpiece weight (max.): 1,00,000 kg, turning diameter: 17,000 mm, faceplate diameter: 5,000 mm, Universal machine 5-axis (turning, milling) Froriep 40KE 500/600-400 Spheromill Year of construction: 1970 (modernized 1984 and 2006) Control: Siemens 840D Milling length: 8500 mm Working height max: 4000 mm Maximum turning diameter: 17,000 mm Table diameter: 5000 mm Ram setting: -15 degrees to +90 degrees Bjdpfjym Ri Ujx Aiajlp Table speed max: 40 rpm (100 kW) Maximum working load: 100 tons Accessories Milling head (800 rpm / 60 kW) Universal milling head (630 rpm) Facing slide for diameter max. 1000 mm Grinding equipment 90 degree angle head (630 rpm) 90 degree angle head (450 rpm) - small

Condition: new, Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 360 mm, spindle bore: 105 mm, turning diameter: 500 mm, center width: 1,500 mm, rotational speed (max.): 1,600 rpm, New conventional lathe DLZ 560x2000 with extensive accessories. Main Technical Data: Max. turning diameter over bed: mm Ø500 Max. turning diameter over cross slide: mm Ø310 Max. turning diameter in gap: mm Ø720 Bed width: mm 405 Max. workpiece length (between centers): mm 1500 Max. turning length: mm 1350 Effective gap length: mm 230 Spindle Spindle nose: D8 Spindle bore: mm Ø80 Spindle taper: M.T. No.7 Metric Ø113 1:20 Spindle speed (steps): 12 speeds Spindle speed range: rpm 36–1600 Further technical details available in the attached document. Main Features: - All-inclusive price with 2-axis position indicator (SINO – General importer in Germany), installed, and powerful 7.5 kW drive - Heavily ribbed machine bed for excellent vibration absorption, even during roughing operations - Extra-wide, induction-hardened and ground guideways for long service life and high precision. Max. workpiece weight up to 500 kg - Electrically interlocked chuck guard - Equipped with adjustable micrometer stop and overload clutch - Hardened and ground gears with oil circulation lubrication for powerful and quiet spindle drive - Precision spindle bearings for high concentricity and accuracy - Clearly arranged, ergonomically designed controls - Single-lever operation for cross feed, longitudinal feed, and rapid traverse for X/Z axes on the carriage Blsdpjyak Evjfx Aiasp - Precise gearshift for speed and feed selection - Finely graduated feed rates and thread pitches - Main spindle gearbox with electromagnetic clutch - Major electrical components by renowned European manufacturers, e.g. Telemechanique - Comprehensive standard equipment including Multifix tool post, chuck, faceplate, 3-axis digital readout, steady rests and much more - All machines are tested by our service engineers prior to delivery Additional models (also with cycle control) available on request. Contact us today and discover the world of innovative turning technology! Our services for you: • On-site consultation and solution finding • Organization of machine transport to your facility • Installation, commissioning, and turnkey handover • Financing and support with subsidy applications via KFW, BAFA, and more

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, L & Z Lathe / DREHMA D 410x1500 / New - Unused / Showroom Machine -CE marking -3-axis digital display -Turning diameter over bed: 410 mm -Turning diameter over cross slide: 225 mm -Turning diameter in the crotch: 580 mm -Turning length: 1500 mm -Spindle bore: 52 mm -Speed range (geared): 45 - 1800 rpm -Automatic longitudinal/facing feeds -Threading / Metric / Inch etc. -Tailstock MK 4 -Drive power: 3.5 kW -Central lubrication -Electric chuck guard -Chuck guard via steel support -Fixed and traveling steady rest -Multifix base with inserts -3-jaw chuck 200 mm -4-jaw chuck 250 mm Blsdpfx Aiezv H Ikjaep -Faceplate -Coolant system -Work light -Foot brake -Traveling center & drill chuck -Machine feet -Documentation Dimensions: L x W x H 2.2 x 0.1 x 1.6 meters / Weight 1850 kg Errors and omissions excepted.

Condition: used, Year of construction: 1998, machine/vehicle number: B 1 - 151, Item No. 26242 Bljdpfx Aiszzpt Hjajp Technical data: - Max. load capacity 100 kg - Faceplate diameter 300 mm - Through spindle bore 65 mm - Faceplate can be swiveled 0 - 90° - Table height in horizontal position 720 mm - Rotational speed, electrically adjustable 0.2 - 6.0 1/min - Right - and Left-hand operation - E - Foot pedal - Welding current transmission approx. 400 A - Power supply 230 V - Table height in horizontal position 1050 mm - 3-jaw chuck with handwheel for opening and closing 250 mm - Space required approx. W 1600 x H 1050 x D 1600 mm - Weight approx. 400 kg

Condition: good (used), Year of construction: 1990, Control system: Siemens 840-C Blsdpfx Aijzadagoajp Faceplate diameter: 1800 mm Swinging diameter: 2000 mm Maximum turning height: 1100 mm (below tool) Table speed: 130 RPM Workpiece weight: 8000 kg Tool changer: 12 positions

Condition: ready for operation (used), A CNC vertical lathe Jungenthal is available. Gear stages: 2, max. speed: 160rpm, max. workpiece height: 800mm, chuck jaws: 6, faceplate diameter: 2000mm, motor power: 50kW, control: Siemens Sinumerik 840D. Documentation available. An on-site inspection is possible. Bljdpfxszcyqge Aiaep

Year of construction: 2018, condition: ready for operation (used), A Krewema CNC large-format semi-frontal lathe is available. X/Z travel: 1500mm/850mm, center height: 475mm, distance between centers base/bed extended: 1685mm/2685mm, max. turning diameter over bed/cross slide: 935mm/620mm, max. swing diameter in the gap: 1600mm, main spindle bore: 155mm, tailstock quill diameter: 140mm, quill taper: MK6, quill stroke: 300mm, tool turret: Sauter, tool stations: 4, 3-jaw chuck diameter: 630mm, faceplate: Schunk, faceplate diameter: 1000mm, control: Siemens 840D sl ShopMill. Including coolant system, external coolant nozzles and chip conveyor. Documentation available. An on-site inspection is possible. Bljdszp Rgkepfx Aiajp

Year of construction: 1967, condition: used, Swing over bed: 540mm, swing over carriage: 280mm, max. cross slide travel: approx. 410mm, max. compound slide travel: approx. 140mm, tailstock quill travel: 225mm, main spindle speed steps: 24, spindle speed: 9-1400rpm, 32 longitudinal feeds: 0.063-2.24mm/rev, 32 cross feeds: 0.032-1.12mm/rev, metric thread pitch: 0.25-560mm, module threads: module 0.1-50, diametral pitch threads: pitch 160-0.5, center height above flat guideway: 265mm, center height above top of V-way: 247mm, bed width: 403mm, main spindle with spindle nose according to DIN 55022: size 11, spindle bore: 103mm, internal taper: 1:20, largest diameter: 109mm, Morse taper of centers: No. 5, leadscrew pitch, standard: 12mm, tailstock quill diameter: 80mm, standard drive power: 18.5kW, rated speed of drive flange motor: 1400rpm, turning tool cross-section according to DIN 770: 25x25mm, max. faceplate diameter: 500mm, max. three-jaw and four-jaw chuck diameter according to DIN 6350: 315mm, weight: 3t, with work light, coolant system with chip tray, four-way tool post with face serration for one-hand operation on the compound slide, operating manual and fixed steady rest. An on-site inspection is possible. Blodszzqblopfx Aiasp

Condition: good (used), Faceplate, faceplate chuck, four-jaw chuck, face turning chuck -Mouth size: Ø 660 mm -Internal thread: M124 x 6 mm Bledpodqm Elefx Aiaop -Weight: 170 kg

Condition: good (used), Faceplate, faceplate chuck -Mouth size: Ø 500 mm -Camlock: Short taper flange, taper size 11, bolt circle Ø 235 mm Bledpedu Ufmofx Aiajp -Weight: 67 kg

Condition: good (used), Faceplate, faceplate chuck, four-jaw chuck -Hole size: Ø 408 mm -Mounting thread: M95 x 6 mm -Weight: 52 kg Bjdpfx Ajdu Ufpsiaolp

Condition: good (used), Two-jaw chuck, 2-jaw chuck, vise, faceplate -Clamping angle: 200 x 200 mm Bjdpfxjb A Ig As Aiaslp -centrically exciting -Mouth size: Ø 200 mm -Weight: 30 kg

Condition: good (used), Faceplate, faceplate chuck, four-jaw chuck -Mouth size: Ø 560 mm -Short taper mount: Ø 122 mm -Bolt circle: Ø 170 mm -Weight: 100 kg Bljdpfx Aob A Iuyoiasp

Condition: as good as new (ex-display), Year of construction: 2025, machine/vehicle number: 0816, Compact, high-precision CNC rotary table dividing head with control. Suitable for single-piece or small-batch production in mechanical engineering. A horizontal or vertical configuration is possible. Available for immediate delivery. - Made in Germany - This dividing head is particularly suitable as a 4th axis on engraving and milling machines for milling, engraving, laser cutting, drilling, grooving, or for use on a tool or surface grinding machine. Square, hexagonal, gear milling with any pitch, or 3D machining is possible. Extremely precise and accurate - the worm gear is designed with a maximum reduction ratio of 100:1, which was specifically designed by us and is not a standard component. Output torque well over 70 Nm. The max. clamping diameter is 250 mm. Center height: 125 mm. The drive is via a controlled stepper motor with 200 steps and 7.5 A, with a holding torque of 9.7 Nm. Possible adjustable indexing accuracy at the output: 0.00028125 degrees with 1/64 step programming. The worm gear pair is four times ball-bearing mounted and adjusted for zero backlash, and can also be readjusted. The bearings are from FAG/SKF. The one-piece, stable output spindle is fitted with a faceplate, d = 200 mm, with an internal taper MK 3 and a through-hole of 20.3. Weight 26 kg. Accessories: Optional USB data cable for programming. Bodjbatamepfx Aiaelp Optional compressed air connection. Optional 200 mm 3-jaw chuck Optional protective shield with integrated proximity switch for automatic operation. Keys, complex scales, cross-holes, or gears can be quickly produced. The electronic control unit as a handy module with 14 travel programs and 2 reference point travels, as well as step monitoring with a power supply, is included in the package. The toolbox module is made of metal. The optimized pre-programming is done in 360, 180, 120, 90, 72, 60, 45, 30, 10, 5, 1, 0.02, 0 degree incremental positioning steps. Repeat cycles, right and left travel, and cycle pauses can be programmed. With the software you can: program travel programs and cycles, program absolute or incremental travel values. The actual value can be displayed very comfortably at any time in the software. With one output, you can exclusively receive start pulses from an NC machine. Keys, complex scales, cross-holes, or gears can be quickly produced. For your applications, standard clamping devices are offered, and we also have the possibility of quickly and inexpensively manufacturing special clamping devices for you. Furthermore, solutions for special rotary tables can be implemented on request. With warranty, German operating manual, and after-sales service since 2006. 1500 Roundinho rotary tables in use worldwide.

Condition: good (used), Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 125 mm Bledpfx Aieb A Rfmjajp -exciting: centric -without interchangeable jaws: without -Weight: 4 kg

Condition: used, Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 200 mm -Hole circle: Ø 175 mm -Weight: 21 kg Bljdpfx Aod R Ew Ueiajp

Condition: used, Year of construction: 1970, 150 mm 500 mm Blodpfegvi I Hox Aiajp weight of the machine ca. 0,75 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), Chuck flange, flange mount, lathe chuck flange, drive flange Bljdpof Ek Hmofx Aiajp -Muck flange: for three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: Ø 380 mm -Inner diameter: 103 mm -Mount: Cone Ø 135 mm -Bolt circle: Ø 170 mm/M16 -Bolt circle: Ø 335 mm/M24 -Dimensions: Ø 380 x 105 mm -Weight: 37 kg

Condition: ready for operation (used), Year of construction: 1992, VTL SC Numerik CNC H 645 Chuck diameter – 1,450 mm Bsdpfx Aijzibuxsaslp Max. turning diameter – 1,650 mm Maximum workpiece height – 1,200 mm Table speed – 2 – 200 rpm Working feed range – 0.1 – 400 mm/min Rapid traverse – 4,000 mm/min Main motor – 55 kW Weight – approx. 21 tons Video showing the machine in operation is available!

Condition: excellent (used), functionality: fully functional, center height: 165 mm, bar diameter (max.): 40 mm, WEILER CONDOR VS 2 -Condition: “Good” -Maximum turning diameter: 165 mm -Swing over bed: 330 mm -Distance between centers: 800 mm -Spindle speed range: 28-2800 rpm Bljdszvy T Tjpfx Aiaep -Automatic longitudinal / cross feeds -Spindle bore: 40 mm -Threading capabilities: Metric, inch, etc. -Collet chuck - quick-change tool holder incl. collets -3-jaw chuck -Faceplate -Multifix system with inserts -Emergency stop -Documentation

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 650 mm, travel distance Z-axis: 800 mm, overall weight: 71,400 kg, spindle speed (max.): 105 rpm, spindle motor power: 1,00,000 W, number of axes: 2, Horizontal machining centre manufactured in 2004. This IRLE IRD 1600 CNC features a maximum pipe diameter processing capability of 1,625 mm and a maximum pipe length of 13,200 mm. It supports a maximum pipe wall thickness of 70 mm and can handle pipe weights up to 250 kN. If you are looking to get high-quality machining capabilities, consider the IRLE IRD 1600 CNC machine we have for sale. Contact us for further details. Bljdpfx Aezr Nmusiaop - Max. Pipe Diameter to be Processed: 1,625 mm- Min. Pipe Diameter to be Processed: 406 mm- Max. Pipe Length to be Processed: 13,200 mm- Min. Pipe Length to be Processed: 6,000 mm- Min. Pipe Wall Thickness: 12 mm- Max. Pipe Wall Thickness (Copying Process): approx. 40 mm- Max. Pipe Wall Thickness (CNC Operation): 70 mm- Max. Pipe Weight to be Supported: 25500 kg- Height between Hall Floor and Pipe Inlet: 800 mm- Total Machine Length: approx. 24,000 mm- Total Machine Width: approx. 4,100 mm- Total Height from Floor to Top of Clamping Vise: 5,000 mm- Total Machine Weight: approx. 71400 kg- Operating Voltage: 400 V, 3-phase, 50 Hz- Control Voltage: 220 V DC / 50 Hz- Nominal Operating Current: 400 A- Intermediate Bed - Bed Length: approx. 3,950 mm- Intermediate Bed - Bed Width: approx. 1,800 mm- Intermediate Bed - Bed Height (incl. chassis): approx. 600 mm- Intermediate Bed - Travel Speed on Foundation Rails: 500 - 5,000 mm/min- Intermediate Bed - Drive Motor Power: 5.5 kW- Headstock - Faceplate Speed Range: 7 - 105 min⁻¹- Headstock - Motor Speeds: 300 - 4,500 min⁻¹- Headstock - Motor Power: 100 kW- Headstock - Motor Power (S1 Duty Cycle): 105 kW- Headstock - Max. Faceplate Torque (S1 Duty): 33,000 Nm- Headstock - Characteristic Speed: 27 min⁻¹- Headstock - Main Spindle Diameter (Front Bearings): 300 mm- Faceplate (X-Axis) - Faceplate Diameter: approx. 1,950 mm- Faceplate (X-Axis) - NC Tool Support Travel Range: approx. 650 mm- Faceplate (X-Axis) - Tool Support Feed Rate (Infinitely Variable): 0.5 - 1,500 mm/min- Faceplate (X-Axis) - Max. Achievable Feed Force: 25 kN- Feed Gearbox (Z-Axis) - Headstock Feed Travel on Machine Bed: 800 mm- Feed Gearbox (Z-Axis) - Feed Rate (Infinitely Variable via AC Servomotor): 0.5 - 200 mm/min- Feed Gearbox (Z-Axis) - Rapid Traverse Speed: 1,500 mm/min- Feed Gearbox (Z-Axis) - Feed Force: 30 kN- Feed Gearbox (Z-Axis) - Feed Motor Torque: 27 Nm- Pipe Clamping Steady Rests - Clamping Range: 406 - 1,625 mm- Pipe Clamping Steady Rests - Pipe Weight Capacity per Steady Rest: 150 kN- Pipe Clamping Steady Rests - Adjustable Clamping Force: 10 - 200 kN- Pipe Clamping Steady Rests - Max. Adjusting Speed of Centrally Moving Clamping Crossbars: 600 mm/min