Used Faceplate for sale (628)

Condition: like new (used), Year of construction: 1987, Vertical Turning Lathe SC43 CNC - Retrofitted and Upgraded with CNC Fanuc 0i-TF Plus Manufactured by TITAN, Romania Year of manufacture: 1987 Completely retrofitted in 2026 Main Technical Data: - Face Plate Diameter: 4000 mm - Max. Swing: 4300 mm - Max. Height Under Crossrail: 2060 mm - Maximum Admissible Load: 18,000 kg - Faceplate Speed Range: 1-92 rpm - Feed Range: 0.05-5 mm/rev - Rapid Feed of Carriages: 2500 mm/min - Main D.C. Motor Power: 55 kW (Siemens) with Siemens Driver Cgodsy A Iifjpfx Aiaeu - Machine Weight: approx. 63 tons New Components Installed: - Complete new electrical equipment with Schneider, Shrack, Siemens components and new cabinet - New control panel - New micro switches - New hydraulic pump and components - New lubrication pump for guideways, complete new installation - New CNC Fanuc 0i-TF Plus The gearbox has been inspected and refurbished with new bearings. The machine has been freshly painted. We offer a 6-month warranty on parts. For further information, please contact us.

Condition: good (used), functionality: fully functional, Technical specifications: Clamping plate diameter: 1250 mm Max. workpiece diameter: 1400 mm Cgjdpfoy Udiljx Aiaeu Max. workpiece height: 1070 mm Max. workpiece weight: 6000 kg Crossrail stroke: 710 mm Working stroke of the slide: 720 mm Working travel of the crossrail support from the center of the clamping plate, left/right: 60/915 mm Two units available for purchase.

Condition: used, Year of construction: 2010, x-travel 500 mm y-travel 700 mm z-travel 500 mm A-axis 240 (-120/+120) ° C-Axis 360 ° control Siemens 840 D faceplate diameter 440 mm T-slot - width 14 mm T-slot - distance 75 mm max. table load 400 kg Cedpfxoxq R E No Aiasgu max. turning speeds 20.000 min/-1 tool taper HSK 63 A workpiece length 330 mm tool diameter 125 mm change-time chip to chip 4,5 sec weight of the machine ca. 10,5 t dimensions of the machine ca. 2,5 x 5,2 x 3,5 m In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories: - Kuka KR200-3 comp Robot Three identical machines are available. Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: ready for operation (used), Year of construction: 2013, Available immediately from university: L & Z Eagle Lathe Type LC 340 Year of manufacture: 2013 Center height: 170 mm Swing over bed: 340 mm Swing over cross slide: 205 mm Turning length: 1000 mm Spindle bore: 38 mm Drive: 1.5 kW Spindle speeds: 60 – 2000 rpm Tailstock quill: 40 mm Chuck: 160 mm Faceplate: 200 mm Four-way tool post Cgsdszaqbwjpfx Aiaeu Weight: 2 t Price: EUR 2,000 – plus VAT, ex location

Condition: new, diameter / mm Cutting (quantity) / weight / kg taper MK / Set of 3 clamping blocks with T-slots Length: 1000mm Width: 80mm Height: 160mm Cgedpfxjy Suqbs Aiasu T-slot size: 32 x 18 T-slot height: 32mm Clamping plate – clamping block – clamping table – clamping arm – T-slot plate

Condition: used, Year of construction: 2008, operating hours: 24,040 h, functionality: fully functional, turning diameter over cross slide: 850 mm, turning length: 3,000 mm, turning diameter: 1,200 mm, spindle bore: 165 mm, spindle speed (max.): 900 rpm, spindle speed (min.): 1 rpm, travel distance X-axis: 590 mm, travel distance Z-axis: 3,000 mm, spindle motor power: 45 W, total height: 2,600 mm, total length: 6,700 mm, total width: 2,300 mm, quill diameter: 140 mm, quill stroke: 300 mm, swing diameter over cross slide: 850 mm, turning diameter over bed slide: 1,200 mm, type of input current: three-phase, torque: 8,000 Nm, overall weight: 11,500 kg, Equipment: documentation/manual, We are offering this used Weiler E 120 X 3000 CNC lathe, manufactured in 2008. First owner. The machine still turns with an accuracy of 0.01. Designed for single-part production. 70% of the machining is done on aluminum. Indexing device for the main spindle, 144 x 2.5 degrees, including hole pattern cycle. 1x Faceplate 1100mm, TYPE PFDT4-1100-15" with hardened base jaws. Various aluminum and steel jaws for the faceplate. 1x Follow rest for spindle boring. 1x Lynette small, 250-500mm. 1x Lynette large, 480-800mm. Cjdpeza Ulgofx Aiaegu 1x Drilling fixture on the facing slide with a D.100mm mounting bore. Various drilling bars for the drilling fixture. 1x Parat revolving tool holder, size 4. 1x Capto chuck with quick-change system. 3x Base holders, Parat for external machining. 3x Drilling bar holders from Parat. 4x Drilling bar holders. 4x Drilling bush adapters. 1x Follow rest center with 2 attachments. 1x Digital caliper, 0-1025mm. 1x Wall stand for micrometers. 1x Micrometer bracket 1000-1200mm 1x Micrometer bracket 900-1000mm 1x Micrometer bracket 800-900mm 1x Micrometer bracket 700-800mm 1x Micrometer bracket 600-700mm 1x Micrometer bracket 500-600mm (2 pieces are shown in the picture) 1x Micrometer bracket 400-500mm 1x Micrometer bracket 300-400mm 1x Internal micrometer set, 50-1000mm. 1x Chip conveyor. Machine type: E 120 X 3000 Machine No.: DJ06 Year of manufacture: 2008 Operating voltage: 400 V Control voltage: DC 24 V Connected power: 55 kVA Rated current: 80 A Frequency: 50 Hz Main fuses: 100 A Machine weight: 11500 kg If you have any questions or require further information, please send us a message or call us.

Condition: used, faceplate diameter 1200 mm swing diameter 1400 mm turning height 1250 mm cross rail - adjustment 600 mm work spindle adjustment 750 mm total power requirement 69 kW weight of the machine ca. 25 t reconditioned Without controls The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team Codpeyq Sy Nsfx Aiaogu

Condition: used, Year of construction: 1984, turning diameter over cross slide: 1,600 mm, turning diameter: 2,000 mm, turning diameter over bed slide: 2,000 mm, turning length: 35,000 mm, workpiece weight (max.): 63,000 kg, Center Lathe SKODA - SUT 200 TD MACH-ID 9446 Manufacturer: SKODA Model: SUT 200 TD Year of manufacture: 1984 Tandem construction on one bed, with left and right headstocks Faceplate double tailstock left and right Double carriage Steady rest included Roller rest included Operator panel with scales requires attention and replacement Motorized tailstock for each side (left and right) 3-bed way design Torque on chuck: 160,000 Nm Minimum turning diameter: Ø 315 mm Industries served: - Shipyards - Propeller shaft manufacturing - Hydraulic cylinder shafts - Camshafts - Defence & Aerospace - Rolls and shafts for steel mills - Crankshafts Specifications Metric / Imperial Turning length: 35,000 mm Cjdpfx Aieynky Aeajgu Swing over bed: Ø 2,000 mm Swing over carriage: Ø 1,600 mm Spindle power: 75 kW Bed width: 1,600 mm Quill diameter: Ø 400 mm Quill stroke: 250 mm Max spindle speed: 180 rpm Feed X-axis: 5,000 mm/min Feed Z-axis: 5,000 mm/min Workpiece weight: 63,000 kg Approximate dimensions: Length: 42,000 mm Width: 3,250 mm Height: 3,250 mm Weight: 158,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend verifying all important details.

Condition: good (used), Year of construction: 1982, VERTICAL TURNING LATHE SC22 Year of manufacture: 1982 Manufacturer: I.M. ROMAN (Romania) Main technical data: - Table diameter: 2000 mm Cgsdpfxeyzxafj Aiasu - Max. swing: 2200 mm - Max. workpiece height: 1500 mm - Max. workpiece weight: 12000 kg - Table speed range: 2–92 rpm - Vertical travel (Z axis) of rail head: 1200 mm - Main motor, DC type: 55 kW - Machine weight approx. 31000 kg Accessories: 4 jaws for faceplate The machine is under power. For more details please contact us.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1032, warranty duration: 12 months, total width: 2,300 mm, total length: 1,685 mm, bending angle (max.): 90 °, working width: 3,200 mm, workpiece length (max.): 3,200 mm, workpiece height (max.): 370 mm, nominal power (apparent): 4 kVA, number of spindles: 4, sheet thickness aluminum (max.): 6 mm, sheet thickness steel (max.): 4 mm, type of input current: three-phase, -Complete machine frame processing -Double-cylinder electro-hydraulic synchronous control -A variety of electro-hydraulic CNC systems are optional -Mechanical compensation Cgedpfxswfwkwj Aiasu -Segmented mold -High-precision back gauge structure -Scalable number of axes

Condition: good (used), Year of construction: 1979, Single column vertical turning lathe BERTHIEZ TM500 SP Manufacturer: Berthiez (France) Model: TM500 SP Year of manufacture: 1979 Main technical data: Table diameter: 6300 mm Maximum turning diameter: 15000 mm Maximum usable height: 4000 mm Arm travel: 3600 mm Main motor power: 100KW Maximum allowable load on faceplate: 80 t Ram size: 360x360 mm Machine weight: approx. 230 tons The machine is capable of both turning and milling operations. Cedpfx Aox A U Raeiaegu Do not hesitate to contact us for any additional information.

Condition: used, Technical details: turning diameter over bed: 830 mm turning dia. over face-slide: 540 mm turning length: 3000 mm turning diameter over support: 540 mm centre distance: 3000 mm faceplate diameter: 800 mm Rapid feed X axis: 4 m/min. control: MTC K (Monforts) range of revolution per miute: 2 -1.600 U/min spindle passage: 88 mm tailstock taper ISO: MK6 tailstock quill stroke: 200 mm max. workpiece weight between centers: 1250 kg max. workpiece weight -without tailstock: 3000 kg turning dia. in gap: 1.200 mm length of gap: 310 mm Weight approx.: ca. 6.85 (ohne Späneförderer und Kühlmittelbehälter) t dimension machine xH: 2,55 x 1,1 x 1,29 m Cycle lathe Machine overhauled in 2010 Operation via control panel Cgjdpfx Aiewmlkneasu Thread cutting by calculation Interpolator of NC control Chip conveyor manufacturer Cable drag Three-jaw chuck D=500mm without clamping jaws Various accessories *

Condition: good (used), Year of construction: 1989, Max. turning Ø:1400mm Table Ø: 1200mm Control: CNC Altstohm Cyber 3000 Length: 2700mm Width: 2400mm Height: 3950mm Weight: 0kg Cedpfswvrtusx Aiajgu

Year of construction: 2007, condition: good (used), Make: Okuma Type: LVT-300 M Control: OSP-P200L Year: 2007 X Travel 210 Z Travel 360 Power 22 kW Driven live tools 7.5 kw / 3000 Rpm In feed table Out feed table Package jaws Package tool holders Chip conveyor Coolant system 9 Bar Grundfos Specifications Metric US Standard Max. turning Ø 280 mm Table Ø 210 mm Horizontal movement support 360 mm ATC / revolver 12 Speeds / ranges 4000 Rpm Cedeku Aaaspfx Aiasgu C-Axis 360000 ° Dimensions (Estimate) There are no dimensions for this machine (yet). Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1981, condition: excellent (used), Dorries CNC Vert. boring mill single column with displaceable table Cjdpjkwcpxefx Aiasgu - Make : Dörries - Germany - Typ : CTE 320 / 3400 - Age : 1981 – Ex. Aerospace ! - Serial.No : D 149 / 5079 - Chuck Ø : 3.200 - Max. turning Ø Pos. 2: 5.100 - Max. turning height : 2.650 - Stroke Tool holder : 1.250 - Crossrailadjustment : 1.500 - Table load : 60.000 - Tool shank size : 40 x 40 - Max. cutting power : 75000 - Max. torque on table : 60000 - Power main motor : 75 kW / 415 - Speeds 1 / 2 / 3 Range: 0,8 – 100 - Feeds Vario : 0,1 – 1.000 - Rapid Feed : 6.000 - Dimensions: 9,30 X 6,10 X 6,30 X 60 - CNC Siemens Sinumriek System 8 - Tool changer 16 positions - SCR Feed drives / each Axis own - Ballcrews + Slide roller guideways - Displaceable table hydraulic / manuel - Circular interpolation Please Note: The above information has been obtained to the best of our ability and belief from, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details

Condition: good (used), Year of construction: 1998, CNC Vertical lathe DS Dorries Scharmann - VCE 2000 FMC MACH-ID 9088 Make: DS Dorries Scharmann Cgodpfswb Ayiox Aiaeu Type: VCE 2000 FMC Control: SIEMENS 840C Year: 1998

Condition: excellent (used), Year of construction: 2009, turning height: 1,280 mm, total height: 5,600 mm, total width: 3,850 mm, total length: 4,260 mm, rotary table diameter: 1,400 mm, workpiece diameter (max.): 1,600 mm, overall weight: 21,500 kg, CNC Vertical lathe Fremtas - 16FR3 MACH-ID 9467 Make: Fremtas Type: 16FR3 Control: FAGOR 8055 TC Year: 2009 Work load 6300 Kg Cross rail adjustment 660 mm Feed rate cross rail 0 - 400 mm/Min Feed rate 0 - 3000 mm/Min Rapid feed 0 - 8000 mm/Min Central lubrication Chip conveyor RAM with Sandvik COROMONT C8 Tooling C8 with double connector Ca 10 units CAPTO Tool system Csdjy Htiljpfx Aiaegu 4 extra heavy duty jaws Max. turning Ø: 1600mm Table Ø: 1400mm Horizontal movement support:1000mm Speeds / ranges: 1 - 200Rpm Power: 75kW Maximum turning height: 1280mm Vertical movement support: 700mm Length: 4260mm Width: 3850mm Height: 5600mm Weight: 21500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), turning height: 1,500 mm, workpiece weight (max.): 20,000 kg, turning diameter: 2,400 mm, Manufacturer: VIPER Type: VTL 20/24 M Control: Fanuc Oi-TD Year of construction: 2008 X Stroke 1835mm Z Stroke 1000mm Table load 20 Ton Ram size 230 x 230 mm Stroke cross rail 800 mm Stroke crossrail in 5 steps each 200 mm Live tools 2000 rpm Power live tools 15 kW ATC 18 station max L = 450 mm Taper BT50 BIG PLUS Full C-Axis 360,000 Under power in AEROSPACE precision plant 2020 Table bearing replaced 2020 Ram bearing replaced 2025 new chip conveyor Specifications Metric US standard Max. turning diameter 2400mm Table diameter Ø 2000 mm Tool changer 18 Speed 200 rpm Power 48 kW Max. turning height 1500 mm C-axis 360,000 ° Dimensions (estimate) Length 9,300 mm Width 6,300 mm Height 6,700 mm Weight Cgodpfsv R Di Sox Aiaeu 48,000 kg Please note: The information on this page has been obtained to the best of our knowledge and belief, and where possible, from the manufacturer. The information is provided in good faith, but its accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contractual terms. We recommend that you check all important details.

Condition: used, Technical details: faceplate diameter: 4000 mm swing diameter: 4300 mm turning height: 330 mm faceplate turning speed range: 1 - 92 U/min workpiece weight: 18 t feeds: 1 - 4000 mm/min main drive motor: 55 kW total power requirement: 85 kVA weight of the machine ca.: 64 t dimensions of the machine ca.: 90, x 7,2 x 5,5 m with CNC SIEMENS 840 D for 4 axis 2 Vertical Supports tool Basic holder chip conveyor Csdpfovb Dq Rjx Aiasgu *

Condition: used, Technical details: faceplate diameter: 5000 mm swing diameter: 6100 mm Cedpfsw Rz U Aox Aiasgu turning height: 2400 mm ram stroke each side: 1490 mm ram head dimension: 340 x 340 mm max. workpiece weight: 100.000 kg total power requirement: 100 kW weight of the machine ca.: 155 t faceplate turning speed range: 0,4 - 50 U/min with 2 axes CNC SIEMENS 840 D *

Condition: used, Year of construction: 2007, Technical details: faceplate diameter: 1600 mm power requirement: 80 kW weight of the machine ca.: 25 t Cedpfox Aq E Hsx Aiajgu dimensions of the machine ca.: 4,4 x 4,62 m max. workpiece diameter: 2000 mm max. diameter of face turning: 1800 mm tool taper: ISO50 The machine has been regularly serviced and is in good technical condition. With C-Axis *

Condition: used, Year of construction: 1971, swing diameter 0520 mm 4-jaw-chuck diameter 500 mm faceplate 800 mm turning diameter over bed slide 400 mm turning dia. in gap 1000 mm turning length 1250 mm turning speed range - spindle 11,2 - 1120 U/min Cgodpoy Nd S Ajfx Aiasu total power requirement 7 kW weight of the machine ca. 3,8 t dimensions of the machine ca. 2,7 x 1,7 x 1,7 m Machine has a 4 position toolholder with quick change device and DRO.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Center height 230 mm Center distance 1500 mm Swing diameter over bed 465 mm Swing diameter over cross slide 270 mm Swing diameter in bed bridge 690 mm Bed bridge length 240 mm Spindle bore diameter 58 mm Spindle head CAMLOCK D1-6 Spindle bore taper Morse 6 Speed ​​range 25 – 2000 rpm (12 speeds) Tailstock taper Morse 4 Tailstock sleeve travel 128 mm Motor power 5.5 kW Machine weight 1720 kgs Csdjy Duy Hopfx Aiaogu Machine dimensions: 2700 x 1080 x 1370 mm Accessories - 3-axis DRO system - 3-jaw chuck - 4-jaw independent chuck - Faceplate - Steady rest - Traveling rest - Wrenches - Cooling water equipment - MULTIFIX knife holder with inserts - Tool case - Tools, wrenches - Cutting tools - Manuals and CD The lathe is in near-new condition and has hardly been used. It is powered up in our workshop.

Condition: good (used), Year of construction: 2009, Ref. -No.: 10026 Manufacturer: SCHIESS Type: VMG4 MA90 Year of construction: 2009 Type of control: CNC-Steuerung Control: Siemens Sinumerik 840 D Storage location: Halberstadt Country of origin: Deutschland Turning Diameter: 5000 mm Turning Diameter Over Bed: 4000 mm Spindle Speeds: 0 - 120 RPM Clamping Diameter: 4000 mm Cross Travel: 420 x 340 mm Max workpiece height: 3000 mm Main Drive: 52 kW Max. Tension: 120000 N Max. Payload: 50 t Power Capacity - Table: 110 kW Max torque faceplate: 100 kNm Further information: Automatic tool changer with 80 positions (AAC) Automatic attachment changer for 6 milling heads Live spindle C-axis table Travel of the Y-axis gantry columns Drilling and milling head (master head principle) Straight drilling and milling head GB-1B Renishaw RBP 60 touch probe Hand terminal Teleservice Internal and external coolant Operator cabin Chip conveyor SADDLE (X-AXIS): Horizontal movement from the center to the right side 4,800 mm Horizontal movement from the center to the left side 3,100 mm Vertical distance between the saddle rails 1,400 mm Speed / range 0 - 16,000 mm / min GANTRY TRAVEL (Y-AXIS): Gantry stroke 5,000 mm Feed 0 - 16,000 mm / min RAM (Z-AXIS): Maximum cutting force when turning 60 Kn Enter minimum bore 550 mm Guide length 1,600 mm Cgsdpfx Ajy H Ebteiaju Speed / feed range 0 - 16,000 mm/min Spindle speeds: Range 1 rpm Range 2 0 - 1,100 - 3,150 rpm Spindle torque: Range 1 2,400 - 2,400 - 850 Nm Range 2 450 - 450 - 160 kNm

Condition: used, Year of construction: 2009, x-travel 800 mm y-travel 800 mm z-travel 800 mm control SIN840D spindle turning speed - stepless 5 - 10.000 U/min power capacity at 40 % load 38,00 KW power capacity at 100 % load 25,00 kW max. torque at 40% / 100% load 288 / 187 kW spindle taper HSK 100 feed X/Y/Z/-axis 0 - 60.000 mm/min rapid traverse X/Y/Z 60,00 m/min feed capacity X/Y/Z 12,00 kN B - axis 180 x 0,001 ° rapid travel B-axis 10,00 U/min size of pallet 800 x 630 mm table load 0,80 t C-axis 360 x 0,001 ° rotary table speeds infinitely variable 1 - 800 U/min power capacity - table 13,85 kW max. torque on the faceplate 1.550 Nm toolpiece magazine: chain magazine 60 Stück tool diameter 110 mm wotkpiece diameter with 2 vacant positions 230 mm tool length - max. 450 mm weight of tools max. 30,00 kg total power requirement 80,00 kW weight of the machine ca. 18,00 t dimensions of the machine ca. 7,50 x 5,50 x H3,50 m 5-axis machining center with SIEMENS SIN840D coolant filer system 980l, chip conveyor, coolant through the spindle, extraction, BLUM tool measurement, measuring probe, operating mode 4, tool cone cleaning, hydraulic clamping with proportional valve. Cgsdpfx Aex Tiy Tsiaeu