Used Fanuc Robot for sale (799)

Condition: ready for operation (used), Robot FANUC Robots Type: M-710iC/50 Maximum reach 2.050 mm Payload 50 kg Load max (kg/lbs) 50 kg, J3 arm, 15 kg Axes 6 Gsdpoguku Hofx Ah Hett Repeatability 0,07 mm Installation Floor, angle, wall, ceiling

Condition: good (used), Year of construction: 2006, functionality: fully functional, Robot Fanuc S-500iB , R-J3iB with 7th axis/motor year 8/2006 Control system: R-J3iB Number of axes: 6 Max. Load capacity: 15 kg Max. Working range: approx. 2757 mm Gedpfxorn Rx Hs Ah Hott Profibus Scope of delivery : Robot,Control unit,Cable,Teach panel,Operating instructions,Circuit diagrams 2 weeks commissioning guarantee. No further warranty. Spare parts are always available from stock. Robot is fully functional and can be inspected. The sales price quoted does not include the statutory VAT of 19%.

Condition: used, Fanuc A05B-1215-B651 Robot arm handling system Robot: Fanuc A05B-1215-B651 Cell: SuperMAX-6-F Travel distance Z : 80cm You are welcome to come by for a viewing. We will be happy to arrange a cost-effective forwarding agent for you. Godpfjtzaiaex Ah Hjtt organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Year of construction: 2014, condition: refurbished (used), machine/vehicle number: 714_0917, Robot palletizing system KEG barrels loading and depalletizing. Godpfx Asg N S Edjh Hott Capacity of up to 120 / h loading and depalletizing. We have been operating these systems successfully for several years. Our KEG gripper can grap KEGs from 300-450mm (adjustable). The system is equipped with a protective housing and access control through a light curtain. PLC Controlled via Siemens S7 TIA Portal. Required space approx. 4500x3500mm. Optionally also a flow keg weigher, pallet labeler, automatic capsule application available from us. We would be happy to integrate your existing components into our system. We have the full KNOW HOW! Have references for several years. We also provide support after the purchase. Can be implemented at short notice, assembly, integration and commissioning from a single source.

Condition: good (used), Year of construction: 2000, functionality: fully functional, load capacity: 16 kg, arm reach: 1,500 mm, controller model: R -J3, We are selling a Fanuc M-16 i in good condition. Fanuc M-16 i Godpfx Aheum Enqe Hjtt Control R - J3 Reach 1500 Weight 250kg Payload 16kg

Condition: good (used), Year of construction: 2000, FANUC LR Mate 200i automation robot + R-J2+ handheld controller The FANUC LR Mate 200i is a compact six-axis robot that is ideal for a variety of manufacturing and system processes. The tabletop design of the LR Mate 200 allows it to be used in a variety of commercial and industrial applications while saving floor space. The LR Mate 200i offers maximum flexibility in a compact design. The LR Mate 200i's hollow joint design encloses all cable routing to prevent snagging, and absolute serial encoders eliminate the need for power-up calibration. Upright or inverted mounting positions are possible without robot modifications. The LR Mate 200i uses the RJ3 controller. Gedpfx Aswbqvfoh Hstt The FANUC LR Mate 200i has a wrist-integrated end effector connector, fail-safe brakes on axes 2 and 3, sealed bearings and drives, and a standard IP54 dust and liquid ingress package. It also has an integrated, internally mounted solenoid valve package. In addition, the 200i can achieve axis speeds of up to 480 degrees per second. Areas of application: Assembly, material handling, material removal, parts transfer Robot specifications Axes:6 Payload:3.00 kg H-reach:700.00mm Repeatability:± 0.0400 mm Robot mass:39.00kg Structure:Articulated Year built 2000 Robot movement speed J1180 ° / s (3.14 rad / s) J2180 ° / s (3.14 rad / s) J3225 ° / s (3.93 rad / s) J4400 ° / s (6.98 rad / s) J5330 ° / s (5.76 rad / s) J6480 ° / s (8.38 rad / s) Robot movement range J1± 160 ° J2+ 150 ° - 35 ° J3+ 165 ° - 150 ° J4± 190 ° J5± 120 ° J6± 360 ° Item condition: used More items - new and used - can be found in our store! International shipping costs on request!

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Robot in very good condition, overhauled and with 12 months warranty (for domestic sale). The robot was in production for only 3 years. Gjdeu Rfffspfx Ah Hjtt Includes teach pendant. Manufacture 2012-12 Load capacity: 7Kg Reach: 717mm Axes: 6

Condition: good (used), Year of construction: 2003, functionality: fully functional, Robot Fanuc LR Mate 200iB R-J3iB Gtjdpfx Ahern Ru Ao Hot Control unit R-J3iB Number of axes: 6 Max. Payload: 7 kg Max. Working range: approx. 717mm radius Year of construction: 2003 Scope of delivery : Robot,Control unit,Cable,Teach panel,Operating instructions,Circuit diagrams 2 weeks commissioning guarantee, no further warranty Spare parts are always available from stock. Robot is fully functional and can be inspected with pleasure Free loading/ex works The sales price quoted does not include the statutory VAT of 19%.

Year of construction: 2007, condition: used, Robot Fanuc LR Mate 200iC/5L R30iA Control: R30iA Year:11/07 Godpeh Tx Tcjfx Ah Hott Number of axles: 6 Max. Load capacity: 5Kg Max. Working range: ca.892 mm Scope of delivery : Robot,Control,Cable,Teach-Panel

Condition: ready for operation (used), GMF Robotics Fanuc A05B-2051-C102 CRT/KB Unit Operator Panel , used, normal signs of wear, 100% functional Gsdpfx Aoi D U Tnoh Hjtt

Condition: excellent (used), Year of construction: 2007, Fanuc R2000iB/210F,20% discount at order more then 1 robot. DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc. Gtodpfx Ahjxq Tu He Hjt

Condition: used, Year of construction: 1999, - Year: 1999 - Documentation available: No - CE certificate present: No - Serial number: R99X75197 - Load capacity [kg]: 6 - Model: k & Place - Number of axes: 6 - Reach [mm]: 1368mm - Controller type: RJ3 - Control type: Fanuc Gsdpowh Spyefx Ah Hett Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: like new (used), Year of construction: 2007, operating hours: 92 h, functionality: fully functional, machine/vehicle number: 82351, overall weight: 520 kg, load capacity: 15 kg, arm reach: 2,800 mm, pivoting range: 320 °, controller manufacturer: FANUC, controller model: RJ3iC, teach pendant manufacturer: FANUC, control cabinet width: 800 mm, control cabinet height: 1,360 mm, input voltage: 400 V, input current: 20 A, type of input current: AC, repeat accuracy: 2 mm, This is a painting robot from Fanuc. It has very special equipment. It was once intended as a replacement robot at BMW for clear-coating luxury cars. It was never used and is therefore as good as new. The robots at BMW worked on a rail. For this reason, a large additional amplifier is installed in the control unit. The corresponding motor is also included. It is practically connected to the robot itself. This means it can be mounted directly on the carriage. Another special feature of this robot is that a motor is built into the shoulder to control a gear pump. This means that dosing on the robot is no problem. The cable length between the robot and controller is 2x10m and can be plugged into the controller. This means 10 m of cable through e.g. a chain from a rail and then another 10 m pluggable to the controller. This is also special. Gtjdpfx Ahjtu H Avj Hst We give a 1-year commissioning guarantee. We can help with transportation and installation. It is mounted together with the controller on a special pallet 2500x800x1600mm ready for transportation. At the moment it is configured as right-armed and right-handed. However, this can easily be changed without mechanical conversion. The device is still with our customer, but can be inspected under voltage at Paintrobotics if there is serious interest. We would bring the device to us from Frankfurt.

Condition: good (used), Year of construction: 2004, For sale are 3 identical LR Mate 200iB 3L robots Control unit R-J3iB Number of axes: 6 Max. Payload: 3 kg Godpfx Ahsxr A Eko Hjtt Reach: approx. 700 mm Scope of delivery : Robot,control unit,cable,touch panel,operating instructions

Condition: used, 6-axis AC servo drive, servo controller, servo inverter, servo amplifier, servo regulator, frequency converter, drive controller for robots FANUC type A06B-6105-H003 No. V07Z08282 NEW / unused Input voltage: 200 - 240 VAC Rated power: 1.5 kW Number of axis outputs: 6 Output current: 6 x 13 A Total output current: max. 78 A Manual No.: B-81465 Standard: EN50178 Installed PCBs: A16B-2000-0063/07D, A16B-3200-0440/05C - Plexiglass cover not included in delivery Dimensions (W x H x D): 70 x 170 x 380 mm Weight: 16.5 kg As new / unused in opened original box from stock liquidation Gtodpfxokpwu Rs Ah Hjt

Condition: new, Year of construction: 2012, operating hours: 10 h, Fanuc R2000iB/165F DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc. Gedpfx Aoxq Tr Eoh Hstt

Condition: like new (used), Year of construction: 2011, operating hours: 2,509 h, functionality: fully functional, machine/vehicle number: 111313, overall weight: 520 kg, load capacity: 15 kg, arm reach: 2,800 mm, pivoting range: 320 °, controller manufacturer: FANUC, controller model: R-30iA, teach pendant manufacturer: FANUC, control cabinet width: 800 mm, control cabinet height: 1,360 mm, input voltage: 400 V, input current: 20 A, type of input current: AC, repeat accuracy: 2 mm, This is a painting robot from Fanuc. It has very special equipment. It was once intended for painting blades for wind turbines. For this purpose, it was installed on a 60 m long rail, which had another rail with which the robot could travel up and down. For this reason, two large additional amplifiers are installed in the control system. This is why the encoder break module is also present twice. Another special feature of this robot is that motors are installed in the shoulder to control two gear pumps. So a 2-component mixture on the robot is no problem. The robot was never actually used. The operating hours only occurred because the robot was live. This was also confirmed to me by the operator of the system (Enercon). The actual servo ON time is 0.2 hours. The robot has slight soiling, but is practically as good as new. Unfortunately, the teach pendant and the teach cable are very dirty. However, this could be replaced if necessary. The cable length between the robot and controller is 5m and can be plugged into the controller. This is also special. We give a 1-year commissioning guarantee. We can help with transportation and installation. It is mounted together with the controller on a special pallet 2500x800x1600mm ready for transportation. Gtedpfjtu Hpqex Ah Hjt We have two of them. The price is for one robot. At the moment it is configured as right-armed and right-handed. However, this can easily be changed without mechanical conversion. The device can be inspected under voltage at Paintrobotics.

Condition: like new (used), Year of construction: 2000, operating hours: 7,600 h, functionality: fully functional, *FANUC ROBODRILL T14-iBL DRILL TAP VMC (4 Axis)* Gtsdex Ehi Ijpfx Ah Hot Category: Vertical Machining Centers (VMC) Reference No.: 311119 Capacity: 700 X 400 X 330 MM Year of Construction: 2000 Technical Specification: SPINDLE Spindle Taper : BT 30 Spindle Speeds : 8000 RPM Spindle Motor : 3.7 / 5.8 kW WORKING CAPACITY Travels (XYZ) : 700 X 400 X 330 MM Guideways : LM ATC Tool Change Capacity : 14 Tools CNC Control : Fanuc 16iM Additional Details: With Nikken 170 4th Axis

Condition: excellent (used), Year of construction: 2012, clamping force: 1,000 kN, Equipment: documentation/manual, Fanuc S2000 i 100B (2012) nr. 23 Clamping force: 100 t Gedpfxox Uqrys Ah Hott Screw diameter: 40 mm Distance between tie bars V: 410 mm Distance between tie bars H: 460 mm Type: Horizontal Drive: Electric Hours: 32426

Year of construction: 2016, operating hours: 24,285 h, condition: ready for operation (used), controller manufacturer: FANUC, overall weight: 4,400 kg, screw diameter: 36 mm, This FANUC Roboshot S150iA was manufactured in 2016. It is an electrical injection moulding machine featuring a screw diameter of 36mm and a closing force between 150-180 tons. It operates on a power supply of 200 V∼50/60 Hz or 220 V∼60 Hz. Consider the opportunity to buy this FANUC Roboshot S150iA electrical injection moulding machine. Contact us for more information. • Power supply: 200 V 50/60 Hz; 220 V 60 Hz • FLA (Full Load Amperage): 54.6 A • SCCR (Short-Circuit Current Rating): 5 kA • Increased closing force -> 180t • HOPPER FLANGE SET GR4 • I/O BASE UNIT • CABLE KIT Gedox Utzdopfx Ah Hett • ANALOG OUTPUT MODULE ADA02A • 8-02 ANALOGUE CORE FUNCTION • CORE PULL 2-FOLD ANALOGUE_MOB • NOZZLE ADAPTER D16 M36X4/M24X1.5 • 7-01 EUROMAP 63 INTERFACE • NOZZLE TIP FOR ARBURG M24X1.5

Condition: used, Year of construction: 2015, Technical details: x-travel: 500 mm y-travel: 400 mm z-travel: 330 mm control: FANUC 31i B5 tool change unit: 21 fach rapid traverse in x-y-z axis: 54 m/min taper ISO: BT 30 turning speed range:: 10.000 1 / min spindle drive: 11 / 3,7 kW max. table load: 300 kg surface area: 600x 400 mm Dimensions (L/W/H): 1,6 x 2,1 x 2,25 m rapid traverse: 48 m/min total power requirement: 11 kVA weight of the machine ca.: 2,1 t vertical CNC-milling-drilling machining center, Infrared Touch probe, el. handwheel, autom. door on right side, no internal Coolant Supply, Approx. 65.500 hours "machine on", approx. 8.200 hours "machine run" Gtsdsugpk Uspfx Ah Hot *

Condition: repair required (used), Year of construction: 2017, functionality: not functional, machine/vehicle number: P177ZG753, Technical characteristics: # Machining Workspace: X 500 mm; Y 400 mm; Z 330 mm # Axis Description: 3 LINEAR AXES (X, Y, Z) + 1 rotary table axis (A-axis) with index dividing head, direct angular measurement system, number of revolutions 50 min⁻¹, accuracy +/- 5" # A-axis Swivel Range: +/-170˚ # Maximum Clamping/Workpiece Dimensions: 650 x 400 mm; max. weight 300 kg # Rapid Traverse: X/Y/Z 54 m/min # Spindle Speed: 100–10,000 rpm, spindle motor power 11 kW # Spindle Taper: BBT30 (with internal cooling) # Automatic Tool Changer: 1x21 tools, chip-to-chip average time 1.5 sec # Maximum Tool Size: Ø40 mm / length max. 200 mm / 2 kg Electrical connection: # Voltage: 3x400V/50Hz # Installed Power: approx. 20 kVA / 22A Dimensions: # Installation space: approx. 1.65 x 3.2 m (with chip conveyor) x 2.8 m # Weight: approx. 8,500 kg Equipment includes: # This 4-axis FANUC Robodrill α-D21LiB5 was manufactured in 2016. Ideal for precision machining, this vertical machining centre offers robust performance and reliability. # CNC Control: Model 31i model b5 # 4th axis and tailstock: Fanuc DDR-TiB 178DU039 2017/08 and TSUDAKOMA tailstock # Chip extractor & coolant filtration unit max. 40 bar: Mosnic model 1641/2010 # Spindle, Guideways, and Electrical Cabinet Cooling Systems # Oil Vapor Absorption/Recovery System: Bristol model B 1000 EF # Fire suppression: Kraft & Bauer # Part presence detection: with low pressure air sensors # Automation: Lateral door automatic and interface ready for automation # In-process inspection: Renishaw TRS2 # Documentation: incomplete Machine condition: NOT WORKING # Hydraulic unit defective Gsdpfx Ajxxt Eheh Hjtt # Two emulsion pumps # Guideway lubrication pump # Safety switch Euchner

Condition: ready for operation (used), Year of construction: 2015, operating hours: 45,109 h, General Data Machine weight 4400 kg Gtsdjx S Slcjpfx Ah Hjt Control Unit Brand FANUC Injection Unit Screw diameter 36mm Clamping Unit Clamping force 150-180t This FANUC Roboshot S150iA was manufactured in 2015. It's an electrical injection moulding machine with a closing force of 150-180 tons and a screw diameter of 36mm. Weighing 4.4 tons, it operates on a power supply of 200 V∼50/60 Hz or 220 V∼60 Hz. Consider the opportunity to buy this FANUC Roboshot S150iA electrical injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: P17XZG 044, Technical characteristics: # Machining workspace: X 500 mm; Y 400 mm; Z 330 mm # Axis description: 3 LINEAR AXES (X, Y, Z) + 1 rotary table axis A (indexing divider head) with direct angular measuring system, max. rotational speed 50 rpm, precision +/- 5 seconds # Axis A swivel range: +/-170˚ # Maximum clamping/workpiece dimensions: 650 x 400 mm; max. weight 300 kg # Rapid traverse speed (X/Y/Z): 54 m/min # Spindle speed: 100–10,000 rpm; spindle motor power: 11 kW # Spindle interface: BBT30 (with through-spindle coolant) # Automatic tool changer: 1x21 tools / chip-to-chip average time 1.5 sec # Maximum tool size: Ø40 mm / length max. 200 mm / 2 kg Electrical connection: # Voltage: 3x400V/50Hz # Installed power: approx. 20 kVA / 22A Dimensions: # Installation space: approx. 1.65 x 3.2 (with chip conveyor) x 2.8 m # Weight: approx. 8,500 kg Equipment includes: # This 4-axis FANUC Robodrill α-D21LiB5 was manufactured in 2016. Ideally suited for precision machining, this vertical machining center delivers robust performance and high reliability. # CNC control: FANUC Series 31i-B5 # 4th axis and tailstock: FANUC DDR-TiB 178DU039 (2017/08) and TSUDAKOMA tailstock # Chip conveyor & high-pressure coolant filtration unit (max. 40 bar): Mosnic model 1641/2010 # Spindle cooling system, guideways and control cabinet cooling # Oil mist extraction/recovery system: Bristol model B 1000 EF # Fire suppression system: Kraft & Bauer Gtedpoxxrb Iefx Ah Hot # Part presence detection: with low-pressure air sensors # Automation: automatic side door and interface, automation-ready # In-process control: Renishaw TRS2 # Documentation: incomplete Machine status: WORKING

Year of construction: 2016, operating hours: 4,439 h, condition: ready for operation (used), General Data Machine weight 4200 kg Control Unit Brand FANUC Model 31i-WB Dimensions Machine Length 2900 mm Main Drive Number of axis 5 Min. Wire Diameter 0.1 mm Max. Wire Diameter 0.3 mm Movement X-Axis Movement 800 mm Gsdpfxsx Nr N Aj Ah Hstt Z-Axis Movement 310 mm Y-Axis Movement 600 mm This 5-axis FANUC ROBOCUT alpha C800iB was manufactured in 2016, featuring a large work area with X-axis travel of 800 mm, Y-axis travel of 600 mm, and Z-axis travel of 310 mm. It supports a maximum workpiece weight of 3000 kg and utilizes a CNC control FANUC 31i-WB for precise operations. If you are looking to get high-quality wire EDM capabilities, consider the FANUC ROBOCUT alpha C800iB machine we have for sale. Contact us for more information. Application Types EDM