Used Feed Rollers for sale (19,983)

Condition: excellent (used), HOLTEC HFT 21 packet cutting saw with automatic feed – year of production 1986 – German production – electric roll feed Technical parameters: - engine power 11 kW - guide length 1700 mm - package width 1300 mm - package height 1300 mm - cutting length max 4500 mm - roll width 1300 mm - spacing between rolls 900 mm - roller diameter 160 mm Lodpfx Aeiwfm Ujabjhn - height of the rollers from the base 730 mm - total length 9400 mm Transport dimensions 650 x 200 x 256 cm weight 2000 kg

Condition: used, Double-column punching press EBU - Eisenwerk Hensel Type HK 130 Z Eccentric punching press, eccentric press Mach. No. P 54096 / 96, built in 1996 Pressure force 130 tons Table size 1200 x 880 mm Stroke adjustment 8 to 140 mm Ram adjustment 100 mm Ram surface 1150 x 800 mm Table opening (support edge) 450 x 350 mm Table opening (through hole) 440 x 235 mm Ljdpfx Aewa D Npsabshn Column width 1200 mm Column width across 595 mm Installation height of maximum stroke of ram at TDC max. 510 mm (ram adjustment at top) Installation height of maximum stroke of ram at BDC max. 370 mm (ram adjustment at top) Stroke rate 40-120 strokes/min. Table height above floor: 900 mm Main drive motor power: 15 kW Hydraulic motor power: 2.2 kW Total current consumption: 40 amps Power supply: 400 volts, 50 Hz - Hydraulically operated multi-disk wet clutch and spring-loaded safety brake - Continuously adjustable drive via frequency converter (120 strokes at 80 Hz) - Hydraulic overload protection - Automated stroke adjustment - Motorized ram height adjustment with digital actual value display - Pneumatic, continuously adjustable ram weight counterbalance - Electrical cabinet adjacent (120 x 40 cm x height 220 cm) - Electric two-hand operation for stroke release - Movable Plexiglas safety door on the operator side, with pneumatic opening - Lubrication unit for circulating oil lubrication (fixed to the machine) - Hydraulic unit for the clutch-brake combination (fixed to the machine) Machine) - UNIDOR APS-Mini tool monitoring system, shown opposite - Operating instructions and documentation for the press available as PDF - Electrical circuit diagram available Included: EBU roller feed unit, type EVS 320 Order No.: ZT01054949 / 96, built in 1996 Strip width: 320 mm Strip thickness: max. 4 mm Strip cross-section: max. 1000 mm² - Feed control via the SIEMENS machine control system - Programmable feed path from the roller feed system - Control panel for feed system with Siemens S5 control system with OP 15, shown opposite Space requirement for press with feed system: L x W x H 380 x 180 x 375 cm Space requirement for control cabinet: L x W x H 125 x 41 x 200 cm, approx. 450 kg Transport dimensions of the machine with control cabinet and disassembled drive motor: L x W x H 400 x 230 x 343 cm Height with drive motor: 375 cm Height without drive motor: approx. 343 cm Weight: 18 tons Good condition

Condition: good (used), Year of construction: 1998, Chipper with horizontal feed and conveyor belt in standby mode. Slow-running and therefore very quiet. Max width: 300 mm. Max height: approx. 30 mm. Motor: 18.5 kW, 115 rpm. Ideal for use next to a panel saw for long strips. Lhodpjgmn Amsfx Aabon

Year of construction: 2025, condition: new, Rollers: 4 Roller width: 60 mm Roller diameter: 120 mm Ledpfx Aasg Ez Siebehn Spring travel: 20 mm Speeds: Variable 3 - 18 m/min. Stand: Stand 1050 plus Motor power: 0.75 kW

Condition: excellent (used), Year of construction: 2013, Manufacturer: BACCI Model: EVO JET Machine type: CNC machining center Year of manufacture: 2013 Technical data: X working area: 3400 mm Y working area: 200 mm Z working area: 100 mm Main motor: 7.5 kW 4 axes 5 axes 5-axis spindle Lsdpfxsrur Tij Aabjhn CNC self-adjusting work tables Special material clamping system Pinion chuck OSAI machine control Electric cabinet cooling Independent Z axes - 2 Number of milling spindles - 4 Number of revolutions max / min: 24 000 Construction with outrigger 2 tables Loading: conveyor belt External transport: conveyor roller Enclosed cabin CE mark

Condition: like new (used), Chain feed table, used for feeding and linear transportation of roll goods or log goods. Forward/reverse run (reversing circuit) integrated, end positions are queried via roller limit switches. Feeding length: 2200mm Feeding height: 950mm (adjustable) Drive power: 0.18kW (Getriebebau Nord) Lhedetw Sm Nspfx Aabsn Condition: slight paint wear, otherwise as good as new

Condition: excellent (used), Bandsaw with feed MEBER SR - after the technical review - in good condition - Italian production TECHNICAL PARAMETERS: 4 kW main engine wheel diameter 800 mm cutting height 420 mm maximum width of the cut material 780 mm cutting width at the ruler of 575 mm cutting width with rolls 195 mm Lhedofwl Uajpfx Aabon maximum width of the material cut with a feed 355 mm cutting band width max 40 mm feed speed adjustable on the inverter feed speed range 0-12.5 m / min height of the feed roller 140 mm pneumatic feed pressure upper and lower belt guides 0.75 kW feed motor stub diameter 100 mm dimensions (length / width / height) 260 x 165 x 115 cm weight 700 kg

Condition: used, Electro Dual Screwdriving Unit with Automatic Feed and Pneumatic Double Stroke BÖLLHOFF Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual screwdriving unit is equipped with a pneumatic double stroke, operated via Festo valves and cylinders. Additionally, various monitoring systems are installed for full automation. Technical data: Torque of electric screwdriver: 0.6 Nm Gearbox torque: max. 10 Nm Speed: max. 20,000 rpm Rated voltage: 3~ 0-230 VAC Current consumption: max. 7 A (per screwdriver) Pneumatic long-stroke cylinder: 80 mm Pneumatic short-stroke cylinder: 20 mm Total pneumatic stroke: 100 mm Spring stroke for screwdriver: 20 mm Distance between both screwdriving tools: 73 mm - Equipped with a TORX bit T27 or TP27 (presumably for M6 screws) - Requires Bosch Rexroth LT303 power module for operation (power module not included) Screwdrivers 1 and 2 are each composed of the following components: Rexroth type servo motor Rexroth type 0 planetary gearbox Rexroth type 0 encoder Rexroth type 0 straight drive output Component details: Electric screwdriver unit Rexroth Servo motor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current consumption: max. 7 A Rated voltage: 3~ 0-230 VAC Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material no.: 0 Efficiency: 90% Gear ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material no.: 0 Nominal torque: 12 Nm Reduction ratio: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight drive output Rexroth Type: 2GA82 SZ2 1/4" SQ Material no.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction ratio: 1 Weight: 0.2 kg Installation length: 90 mm One 7 m motor connection cable is included in the delivery. Overall dimensions W x H x D: approx. 180 x 920 x 300 mm Total weight: approx. 20 kg Good condition Ljdpfx Aehxvu Esabehn

Condition: good (used), Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Roll diameter: 80 mm -Transport roller width: 495 mm -Total length: 530 mm -Shaft mount: 12 mm -Two-edge: 10 mm -Number: 186x rolls available -Price: per piece Ljdjv Tc U Sspfx Aabohn -Weight: 2.6 kg/piece

Year of construction: 2024, condition: new, Rollers: 3 Ljdpfx Aeg Ez Smjabjhn Roll width: 60mm Roll diameter: 120mm Spring travel: 20mm Speeds: variable 3 - 18 m/min. Stand selectable: Delivery without stand / optional the following stands are selectable: Standard / 1050 / PLUS with counter Motor power: 0,75kW

Year of construction: 2021, condition: new, Various belt and vibrating stacking conveyors (Unused 2021) Lsdpfxewf Ib Hj Aabohn

Condition: not inspected (used), Leadscrew and feed rod lathe, Manufacturer: Emco, Model: Maximat Mentor 10 Lsdpfx Aew U Rdhsabehn

Condition: excellent (used), Feed table for a four-sided planer TECHNICAL SPECIFICATIONS: max. workpiece length 5000 mm min. workpiece length 400 mm max. workpiece width 330 mm max. element thickness 120 mm roller motor power 1.1 kW Lhjdshtq Amjpfx Aabjn 1.5 kW chain motor power adjustable feed on the inverter 7 guide chains 13 steel feed rollers roll diameter 90 mm height of the rollers from the base 820 mm pneumatic pressure height of the rollers from the base 820 mm dimensions (length / width / height) 600/240/155 cm weight ~ 1500 kg

Condition: used, Frame die-cutter - Swivel frame die-cutter - Flatbed die-cutter - Platen die-cutter - Eccentric press Punch + feed for the use of bandknife punching tools Lhodjdzqmzspfx Aabon Flatbed die cutter HELMERDING type PSH 25 Com. No. EP 97784 Machine. No. 6073 Year of construction 1998 Compressive force 25 ton. Clearance between the tie rods 700 mm Table surface = installation space 800 x 670 mm Table surface = installation frame width 510 x depth 440 mm, plate thickness 20 mm Plunger surface 800 x 670 mm Hole in the table 490 x 420 mm Plunger stroke 45 mm Ram adjustment travel 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min. Motor power 15 kW Mains connection 400 Volt, 50 Hz - Controlled drive for infinitely variable stroke rate - Pneumatic clutch-brake combination - ram compensation cylinder - VOGEL automatic central lubrication system - solid base plate with 4 swinging elements under the machine Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons good condition The machine was formerly used for cutting out cardboard blanks. Ideal for cutting out non-woven fabrics or similar for breathing masks.

Condition: used, EUROPA 4-Roller Feeder 400V with Variator Specifications: • condition – used, visible signs of wear • manufacturer – EUROPA • model – 400V • 4 feed rollers (dimensions: 120x60 mm) • forward/reverse rotation • speed adjustment via variator from 3.7 to 22.0 m/min • motor powered by 380V (3-phase) • weight approx. 70 kg Additional information: • average technical condition Lsdpfjw Hyznsx Aabehn • the photos shown reflect the actual condition of the item for sale • device can be started and tested on site

Year of construction: 2025, condition: new, Rollers: 4 Roller width: 60mm Roller diameter: 120mm Suspension travel: 20mm Speeds: 8 Tripod: 1050mm Lodpfx Aaog Ez Sqjbjhn Motor power: 1 / 0.7kW

Condition: good (used), Manufacturer: Bühner Schaible Elektronik GmbH Type: th 15 / S2 Electrical data: 230 V / 50-60 Hz / 6A Diameter: 900 mm Lsdpfx Aaeh Dimnebohn

Year of construction: 2003, condition: ready for operation (used), Output: 2-19l/min, hopper capacity: 35l, connected load: 3kW, length: 1220mm, width: 580mm, height: 890mm, weight with control cabinet and pump: 140kg, machine was hardly used. Ljdsh I N Nnspfx Aabehn

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, Bruderer roll feed, BBV 202/120, left-hand side, suitable for installation on BSTA 25/250 or BSTA 50/500 presses Feed length 0-120 mm Roller width 120 mm Strip inlet width max. 203 mm Strip thickness max. 6 mm Feed length adjustment motorized. Fully overhauled in 2025. Available for immediate delivery. Also in stock are other feeder models, such as BBV 190/85, BBV 195/85, BBV 205/120, BBV 320/200 etc. Please contact us for more information! Lhedpfx Aaow S Hv Iebjn

Condition: used, Vibratory bowl feeder / sorting device / bowl feeder / vibratory feeder RNA Vibratory bowl feeder, sorting device / screw feeder with vibratory feeder for screwdriving technology Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Ser.- No.: 03611 Year of construction: approx. 2000 Cup diameter bottom: 300 mm Pot diameter top: 350 mm Inner pot height: approx. 25 mm Sorting track width: approx. 30 mm Total height (drive + bowl with sorting track): 380 mm Lhedpouzn Nnjfx Aabjn Vibration frequency: 100 Hz / 6000 min-1 Mains connection: 230 Volt, 50 Hz - The conveyor was used for feeding automotive fuses Space requirement: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Linear conveyor / vibratory conveyor / sorting device Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Ser. No. 00835 Year of construction: approx. 2000 Maximum rail length: 700 mm Usable weight: approx. 1.5 to 2 kg Vibration frequency: 100 Hz / 6000 min-1 Mains connection: 220 Volt, 50 Hz - Swing plate L x W x H 400 x 65 x 12 mm - Mounted track length 530 mm - Height with oscillating plate 145 mm Space requirement: L x W x H: 580 x 120 x 400 mm Weight of linear feeder: 20 kg Control unit for vibratory drives, control unit, controller, control system for vibratory conveyors / sorting device / bowl feeder / vibrating bowl / vibratory feeder Manufacturer: RNA Rhein-Nadel Automation GmbH Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 Veff; (230VAC in motor operation) at 230V mains voltage 0 ... 98Vrms; (115VAC in motor mode) at 115V mains voltage Output voltage: 0...208 V (rms) adjustable, (230 V mains) Number of power outputs: 2 Output 1: Circular conveyor, linear conveyor max. 10A adjustable Output 2: Circular conveyor, linear feeder max. 6 A adjustable Total load current: 16 Aeff Sensor inputs: 1 Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay DOWN: 0 ... 8 sec. Power output connection: Hirschmann 7 pol. - Two power outputs - Sensor amplifier with independently adjustable time stages (On / Off) - Soft start (internally adjustable) - External enable input 24VDC Space requirement: L x W x H: 260 x 190 x 140 mm Control unit weight: 3.6 kg All devices tested and in good condition

Condition: used, Electric dual screwdriver unit with automatic feed and pneumatic double stroke, mounted on handling device, handling system, manipulator for screwdriving technology. Screwdriving Unit: BÖLLHOFF / BOSCH REXROTH Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual screwdriver unit features a pneumatic double stroke via Festo valves and cylinders. Various monitoring systems are installed to enable full automation. Screwdriver 1 consists of the following components: - Rexroth type servomotor - Rexroth type 0 planetary gearbox - Rexroth type 0 encoder - Rexroth type 0 straight drive head Screwdriver 2 consists of the following components: - Rexroth type servomotor - Rexroth type 0 planetary gearbox - Rexroth type 0 encoder - Rexroth type 0 offset drive head Dimensions (WxHxD): 165 x 1000 x 200 mm Pneumatic long stroke: 30 mm Pneumatic short stroke: 20 mm Screwdriver spring travel: 20 mm Last screws used: M6 x 15 mm Electric screwdriver unit Rexroth Servomotor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm/A Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current draw: max. 7 A Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material No.: 0 Efficiency: 90% Reduction ratio: i=18.9 Max. torque: 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material No.: 0 Lodpfxjfx Hyfo Aabohn Nominal torque: 12 Nm Reduction: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight drive head Rexroth Type: 2GA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction: 1 Weight: 0.2 kg Installation length: 90 mm Offset drive head Rexroth Type: 2VNA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction: 1 Weight: 0.6 kg Installation length: 153 mm Handling system: JÄGER HANDLING Type: Handy-flex 300 Horizontal movement: 400 mm Vertical movement: 450 mm Load capacity: max. 14 kg Handyflex reach: 250 to 650 mm Handyflex reach (swung out): max. 860 mm Swivel radius at full extension: max. 360° Guide column vertical: Ø 30 mm Guide columns horizontal: Ø 20 mm - Balancer for vertical movement - Adjustable load capacity - Adjustable stop for limiting swivel radius Dimensions (L x W x H): approx. 1150 x 650 x 1400 mm Total weight: approx. 90 kg Good condition Without the blue steel pallet as base plate Blue steel base plate is not included in the scope of delivery.

Condition: used, Transistor pulse inverter for three-phase feed drives with analog control, servo controller SIEMENS type Simodrive 610 6SC6101-3A-Z Fab. No.: A 822M103 Z = A30+A20+A18 Year of manufacture: 1989 The Simodrive 610 transistor pulse inverters have been developed to supply the 1FT5/1FS5 three-phase servo motors. The dynamic characteristics of these motors are to be used optimally. The pulse inverters can be used for a wide variety of tasks by equipping the power section accordingly. This flexibility is further increased by expansion modules for the power section. Supply voltage: 3 AC 50/60 Hz 165 Volt or DC 220 Volt (suitable transformer: 380/165 Volt 5kVA (not included in delivery) Output voltage: 3 UC 200 Volt Efficiency: approx. 95 Number of feed axes: 4 Speed reference: +-10 volts Auxiliary voltage: 24 volts Relay contact for messages fault/ready for operation Lodpfx Aajh D Syvsbohn dimension WxHxD: 339 x 440 x 300 mm Weight: approx. 25 Kg The servo drive is still ready for operation in a Gildemeister GDM42. Further components from the Gildemeister you will find under stock numbers: 60343, 60347, 60348

Condition: used, Single-column eccentric press EBU Type 75 SKU Machine no. No. P 4598462 Year of construction 1962 Compressive force 75 ton. throat depth 300 mm Lodpfjdzqltox Aabehn Table surface 800 x 620 mm waste hole 325 x 225 mm Plunger surface 470 x 180 mm Clamping pin bore Ø 40 mm Table height above floor 845 mm Stroke adjustment 16 - 140 mm Plunger adjustment 80 mm Installation height max. approx. 420 mm Stroke rate 60 + 105 strokes/min. Motor power 4 kW Mains connection 380 Volt, 50 Hz. - Pneumatic clutch/brake combination EBU - Overload protection with breaker plate in ram - UNIDOR tool monitoring system, type APS MINI - mechanically driven gripper feed with belt straightener OSTERKAMP, type ZPN 200/350 - strip width: 200 mm, feed length: max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds due to 2 V-belt stages on the wheel transmission - Two-handed operation - Simple work area shielding for swinging open - Table height adjustment in lowest position = threaded spindles for adjustment 50 mm below floor level - Control cabinet and control panel for tool monitoring adjacent - Automatic central lubrication - 4 machine feet Space requirement L x W x H 2600 x 2300 x 2450 mm Weight approx. 5.5 tons good condition

Condition: used, Double column eccentric punching press BLEMA Gotha type PEZ 160-50 MHSY-ES Eccentric press with roller feed ALBA Machine no. No. 88151005 Year of construction 1988 / 92 Pressure force 160 ton. Frame width 970 mm Stand width sideways 560 mm Table size 900 x 900 mm ram surface 900 x 700 mm Tool installation height 560 mm, max. 700 mm Stroke adjustment 8-160 mm Ram adjustment travel 125 mm Stroke rate 25 to 70 strokes/min. Belt width in roller feed max. 400 mm Motor power approx. 15 kW Mains connection 380 Volt, 50 Hz - Infinitely variable stroke rate via frequency control - Automatic stroke adjustment - ram weight compensation cylinder with compressed air - Hydraulic overload protection in the ram - Pneumatic clutch/brake combination - Central oil lubrication - Precisely guided press ram with oil-lubricated guides - UNIDOR press control - Swiveling control panel - Press and feed control cabinets, together on one platform, adjacent Platform dimensions 3400 x 2250 mm, height without feet 2950 mm Lhsdsdzqlvopfx Aabon Width of the press without feed 2100 mm Depth of the press with drive motor 2300 mm Overall height of the press 4150 mm Weight of punching press approx. 18 tons. For transportation, the drive motor is removed and the machine is placed on its face. In addition: NC roll feed straightening machine ALBA type GGVHY400 Apparatus no. 1405 and 1406, order no. 910708 (year of manufacture 1992) - ALBA PSS 300 feed control - Feed length infinitely programmable from 0.1 to 6500 mm per stroke - Belt thickness at 400 mm width max. 3 mm - Belt thickness for 300 mm width max. 4 mm - Belt cross-section max. 1200 mm2 - Roller drive hydraulically controlled by the feed - Height-adjustable feed unit on the press to adjust the material infeed height - Hydraulic unit opposite - Drag straightener with hydraulic opening and closing Weight of the complete system approx. 24 tons Space required for transport a mega trailer with an internal height of 3 meters and a loading length of 13.6 meters good condition

Condition: used, Heavy-duty roller conveyor with steel support rollers Year of manufacture: approx. 2000 Roller conveyor length: 4950 mm Usable width = roller width: 485 mm Total conveyor width: 580 mm Conveyor height: 950 mm Number of rollers: 7 pcs Lhodpfxjw E Nwpo Aabsn Roller pitch: 850 to 620 mm (center to center) Roller diameter: Ø 90 mm Axle diameter: Ø 20 mm - Very robust construction made of angle steel 130 x 65 x 8 mm Transport dimensions: length 4950 mm, width 580 mm, height: 950 mm Net weight: 360 kg In good condition