Used Felder Bf 6 41 for sale (153)

Condition: excellent (used), Felder TEMPORA F600 edge bander with glue box Liquids Prjdpfoy N Sdyox Abpoa Pre-milling cutters, Glue application with roller, Interchangeable glue tank Second tank included Features glue box, enabling edge banding with PUR glue Pneumatic pre-cut guillotine Liquids End-trimming sawblades Top/bottom trimming unit Corner rounding unit, Profile scraper Cleaning fluids Flat scraper Polishing unit The machine has NC control Max workpiece height: 60mm Max edge banding thickness (roll): 3mm Feed rate: 10 m/min Original working distance: 30,000 meters, in my opinion the technical condition is very good Year: 2023 Possibility to inspect and test on site

Condition: used, Year of construction: 2021, - Edge joining unit - Teflon-coated gluing unit - Miter saw unit - Multifunction milling unit x-motion PLUS, flush and radius milling unit - Edge processing unit - Radius grooving unit - Polishing unit Edge banding machine Manufacturer: Felder Format4 Type: Tempora60.06LX Year of manufacture: 2021 Technical data Control system: x-motion PLUS Chain feed Feed speed: 10 m/min Drive motor: 0.75 kW (S6) - 1.1 kW (S6) Minimum workpiece length: 140 mm Minimum workpiece width: 70 mm The minimum workpiece width varies depending on the workpiece length, height, and surface texture. Rotary table edge magazine for edge banding material Diameter of the rotary table: 750 mm Edge thickness: 0.4 - 3 mm Pull-out frame Pull-out workpiece support, extendable up to 450 mm Upper pressure bar Manually adjustable workpiece height: 8 - 60 mm Edge feeder for edge banding and strip material Edge joining unit: 2.2 kW, diamond cutter Z2 Speed: 12,000 rpm, 2 x 1.1 kW Teflon-coated gluing unit for 1.5 kg of EVA or PUR granules Ready for use after only 10 minutes of heating time Tool-free quick-change system Pressing unit, pneumatically controlled 1 driven and 2 tapered pressing rollers form the pressing zone Shear cutter for edge banding material, 0.4 - 3 mm thickness Miter saw unit with two high-frequency motors 0.35 kW, 12,000 rpm Pneumatically swiveling 0 - 10 degrees Multifunction milling unit x-motion PLUS, flush and radius milling unit 1 high-frequency motor above and below, 0.75 kW, 12,000 rpm, each with 4 interchangeable cutters Edge processing unit For soft-forming and post-forming workpieces, for processing the end edge with 0.4 - 3.0 mm edge thickness and 10 - 60 mm workpiece height 2-axis motor-controlled radius grooving unit including pneumatic retraction function Polishing unit Pjdpfxszuyh Ij Abpjra Above and below Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, For sale is a Felder RL-160 clean air extraction unit with a maximum air flow rate of 3,200 m³/h. The extraction unit is in excellent condition and has been inspected and serviced by our specialists. (Fully functional) Technical data: - Max. air flow rate: 3,200 m³/h - Filter surface: 10 m² - Extraction connection Ø: 160 mm Predpfx Abowp Rgmspea - Manual filter cleaning - H3 dust tested - Year of manufacture: 2020 The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Related terms: clean air unit, extraction unit, extraction, clean air, RL Reference: R-A0117

Condition: ready for operation (used), Year of construction: 2013, machine/vehicle number: 200.04.007.13, functionality: fully functional, power: 11 kW (14.96 HP), workpiece height (max.): 60 mm, total height: 1,700 mm, total length: 4,800 mm, total width: 900 mm, TECHNICAL DETAILS Workpiece height min.: 8 mm Workpiece height max.: 60 mm MACHINE DETAILS Prodpfx Asyux Egjbpoa Power: 11 kW Line voltage: 400 V Current: 28 A Phases: 3 Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 4,800 x 900 x 1,700 mm Machine weight: 1,250 kg EQUIPMENT Multifunction milling unit Pre-milling unit Profile milling unit Gluing unit

Condition: used, Year of construction: 2021, functionality: fully functional, Felder FB 510 vertical band saw, purchased on May 26, 2021, for cutting curves, making longitudinal cuts, and performing shaped cuts in wood and wood-based materials. A robust workshop machine for cutting, model making, furniture construction, and training purposes. Key technical data: Prsdpfx Ajzun Szsbpja - Machine type: Vertical band saw - Model: Felder FB 510 - Cutting height: approx. 410 mm - Cutting width / throat depth: approx. 480 mm - Roller diameter: approx. 500 mm - Table size: approx. 500 x 640 mm - Table tilt: approx. -10° to +45° - Saw band length: approx. 4318 mm - Saw band width: approx. 6–25 mm - Cutting speed: approx. 1100 m/min or 1450 m/min, depending on the model - Motor power: approx. 3.0 kW / 4.0 hp - Dust extraction: 2 dust extraction connections, approx. 120 mm each, depending on the model - Weight: approx. 250 kg - Versatile machine for curved cuts, contour cuts, ripping, and general cutting - Suitable for solid wood and wood-based materials - Ideal for woodworking shops, model making, training facilities, and makerspaces No guarantee.

Condition: used, Year of construction: 2019, CNC Machining Center FELDER FORMAT4 Profit H200 13.33 Year of manufacture: 2019 New machine (used only for demonstration purposes in a school) Number of axes: 4 X-axis travel: 4000 mm Y-axis travel: 1670 mm Z-axis travel: 500 mm Technical specifications Spindle power: 12 kW Spindle speed: 24,000 RPM Additional information Working area (maximum panel size) X: 3300 mm Y: 1280 mm Z-distance: 250 mm Spindle: Tool interface: HSK F63 Rated power at: approx. 12,000 RPM Cooling: Air-cooled Rotation: CW / CCW Tool magazine Linear tool magazine (mounted on the side): 12 positions Additional linear magazine on the gantry: 4 positions Max. tool diameter: 250 mm Max. tool length: 300 mm Drilling unit Model: DH 24 6H 2S Vertical spindles: 18 (12 in X, 6 in Y) Horizontal spindles: 6 (4 in X, 2 in Y) Max. drill length: 70 mm Max. tool diameter: 10 mm Dadoing machines: 2 (X and Y) Max. saw blade diameter: 120 mm Max. speed: 6,000 RPM Vacuum table 6 supports (instead of 4) Two-circuit vacuum system Height of vacuum cups: 100 mm Pneumatic support locking Adjustable side stops (Y-axis) Axis system X-axis: Rack and pinion drive Y/Z-axis: Ball screw drive Linear guides in all axes Automatic central lubrication Control and software CNC control with CAD/CAM software 3D simulation preview DXF import capability Pedpfxjzuxi Re Abpora Parametric programming Remote maintenance package (internet-enabled)

Condition: used, FORMAT 4 Kappa V60 Panel Saw - used - Welded frame with extremely high rigidity, automatically retracting support slats, stable locking of the saw carriage at top and bottom, control panel at eye level, digital readout on the longitudinal stop, digital display for horizontal cuts, strip cutting device, lift-roller transport system, Podoy Sazrspfx Abpjra edgable support surface, dust extraction unit TRK, dust-tested ----- Technical Data ----- Cutting length: 4,300 mm, Cutting height: 2,200 mm, Cutting depth: 60 mm, Saw blade Ø: 250 mm, Motor: 3 kW, Extraction port Ø: 2x 100 mm, Space requirement (LxWxH): 5,600 x 1,700 x 3,000 mm

Condition: like new (used), Year of construction: 2024, For sale: Felder RL-160 clean air extraction unit with a maximum air volume flow of 3,200 m³/h. The extraction unit is currently in use as a demonstration model in our showroom and is therefore in as-new condition. Prsdpfx Absyh Ai Hopea Technical data: - Max. air volume flow: 3,200 m³/h - Filter area: 10 m² - Extraction connection diameter: 160 mm - Manual filter cleaning - H3 dust-tested - Year of manufacture: 2024 The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Sale subject to prior sale! Related terms: clean air unit, extraction unit, extraction, clean air, RL Reference: R-A0117

Condition: used, Year of construction: 2013, machine/vehicle number: 320.002.13, functionality: fully functional, operating hours: 3,600 h, power: 12 kW (16.32 HP), input voltage: 400 V, input current: 52 A, input frequency: 50 Hz, type of input current: AC, workpiece length (max.): 4,300 mm, workpiece width (max.): 2,150 mm, workpiece height (max.): 100 mm, number of axes: 4, number of slots in tool magazine: 18, controller manufacturer: Felder, year of last overhaul: 2025, Equipment: CE marking, CNC machining center Profit H10 22.43 Year of manufacture: 2013 Operating hours: approx. 3600 h System: Matrix table made of phenolic resin Slotted table with two rows of stops Automatic central lubrication HARDWARE: Control computer Mobile control panel Handheld terminal for remote control of the axes Two vacuum pumps, rated output 2 x 250 m3/h Tool changer with 10 tools Tool changer on the left in the machine frame: 8 tool positions for HSK Milling spindle 12 kW (S6) HSK F63, 24000 rpm Extraction: Central extraction via combined connections (D=250 mm) Software: Woodflash German (H20/H08/H10/H50) Travel range of the axes H10 22.43 X = 5230 mm Y = 2560 mm Z = 280 mm Working area: X = 4300 mm Podpezwt Ndsfx Abpora Y = 2160 mm Z = 105 mm Axis positioning speed: X = 100 m/min Y = 100 m/min Z = 30 m/min The machine will be in operation until calendar week 38 of 2026, after which it will be dismantled. In addition, 2 swivel heads for 5-axis machining can be purchased. These are not included in the quoted price and will be priced separately. The price applies ex works, including loading. Transport can be arranged and ordered separately. Assembly and installation assistance can also be offered as an option.

Condition: used, Felder AD 741 Surface and Thickness Planer Spiral cutter block Main motor 4 kW, Surface planer table length 2000 mm, Planing width 410 mm, Thicknessing capacity height 230 mm, 1 feed speed, Podjxxavmopfx Abpjra Manual thickness table adjustment with digital height indicator Machine ready for operation, quiet

Condition: excellent (used), Thickness planer Felder D963 Pjdpfx Abexdmu Tepsra Max. planing width: 630 mm, Max. planing height: 300 mm, Spiral cutterhead, two rows, Electric height adjustment with readout, Feed with adjustable speed, 7.3 kW motor, Machine in very good condition.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, cutting height (max.): 104 mm, cutting width (max.): 800 mm, saw blade diameter: 315 mm, milling spindle length: 30 mm, table length: 1,300 mm, input voltage: 400 V, input frequency: 50 Hz, For sale is a high-quality Felder KF 700 S Professional from the year 2023. This combination circular saw and routing machine combines two full-fledged professional machines into a space-saving unit and impresses with its high precision, robust construction, and proven Felder quality. The machine is in well-maintained used condition and is ready for immediate use. Thanks to the precise X-Roll format sliding table, the pivoting routing spindle, and the powerful 5.5 kW motor, the KF 700 S Professional is ideally suited for carpentry shops, joineries, furniture manufacturing, and professional interior finishing. Equipment: • X-Roll precision format sliding table • Pivoting circular saw unit • Pivoting routing spindle • Routing spindle quick-change system • Extension table with rip fence Podpfjzwmwhox Abpjra • Professional Felder equipment • Dust extraction connections for sawing and routing operations • Saw blade pivotable: 90° to 45° • Format sliding table: 2,500 mm • Rip fence: 2,600 mm • Routing spindle pivotable: 90° to 45° • Routing spindle Ø: 30 mm • Routing table opening: 230 mm • Routing tool Ø max.: 230 mm Special equipment: • 008 7.5 HP motor • 010 Star-delta starter • 014 3-phase CEE socket for additional equipment • 139 On/off switch on the sliding table • 082 Preparation for adjustable slot tool • 071 Angle indicator for circular saw pivoting on the handwheel • 081 Circular saw blade guard, pivotable • 085 Electronic digital display on the circular saw fence with fine adjustment • 103 Routing spindle 30 mm, 115 mm usable height above the table • 110 Angle indicator for routing spindle pivoting on the handwheel • 161 Extension table 1500 for sliding table • 173 Angle grid index system for extension rip fence

Condition: like new (used), Year of construction: 2023, Felder FB 510 Professional Wood Band Saw – 2023 – Made in Austria For sale: Felder FB 510 professional band saw, manufactured by Felder Group (Austria). This is a high-quality, industrial woodworking machine designed for precise cutting and heavy-duty workshop use. The machine features a robust frame and a large cast iron table, ensuring stability, accuracy, and a long service life. Prodpfoyq N Azex Abpoa Technical Specifications Model: Felder FB 510 Year of manufacture: 2023 Motor power: 3.0 kW Power supply: 400 V / 3 Phase / 50 Hz Current: 6.4 A Blade length: 4293 – 4343 mm Blade width: 6 – 25 mm Max cutting height: approx. 410 mm Max cutting width: approx. 490 mm Heavy-duty cast iron table Made in Austria Condition This machine is in very good working condition, well-maintained and ready for immediate use. Ideal for: Carpentry workshops Furniture production Wood processing facilities Professional woodworking applications

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, volume flow: 2,500 m³/h, intake vacuum (max.): 22 mbar, intake manifold diameter: 140 mm, filter area: 10 m², total height: 1,940 mm, total length: 1,040 mm, total width: 898 mm, overall weight: 210 kg, Equipment: CE marking, For sale is a used Felder clean air extraction unit RL 140, manufactured in 2023. This compact and powerful extraction system ensures clean air conditions in the workshop and is ideally suited for use with panel saws, planers, milling machines, and other woodworking machines. Thanks to the H3-certified clean air system, a residual dust content of less than 0.1 mg/m³ is achieved. The unit is in good condition and is ready for immediate use. The fan wheel, which is located on the clean air side, prevents dust from escaping and ensures a high level of operational safety. Equipment: • Clean air extraction system with H3 certification • Manual filter shaker • Large 200-liter chip container • Compact design • High extraction performance with minimal space requirements Podpfx Abezwmxxspora • Ideal for professional woodworking shops • Nominal air flow rate: 1,108 m³/h • Residual dust content: < 0.1 mg/m³ (H3 certified)

Condition: used, Year of construction: 2021, functionality: fully functional, Extraction ducting, purchased on March 24, 2021, for the wood workshop extraction system. Piping/ducting system for connecting multiple woodworking machines to a central or decentralized extraction system. Total length of ducting (approximate dimensions): 300 mm pipe diameter → approx. 20 m 250 mm pipe diameter → 1.5 m + approx. 7 m hose 200 mm pipe diameter → approx. 2 m 160 mm pipe diameter → approx. 18 m 140 mm pipe diameter → approx. 1.5 m 120 mm pipe diameter → approx. 5 m 100 mm pipe diameter → approx. 6 m Extraction flaps: 300 mm → 1x 250 mm → 1x 160 mm → 4x 140 mm → 1x 120 mm → 2x 100 mm → 2x Psdszuyz Iopfx Abpjra Key technical data: - Machine type: Extraction ducting / piping system for chip and dust extraction - Application area: Connection of woodworking machines, extraction points, and extraction system - Function: Collection and removal of wood chips and dust from the workshop - System components: Pipes, elbows, branches, dampers, brackets, and connecting pieces - Material / design: Workshop ducting for stationary extraction technology - Use: Connection of multiple machines such as saws, planers, milling machines, and sanding machines - Advantage: supports a clean, safe, and efficient workshop operation - Particularly interesting in combination with an extraction system or for workshops under construction/renovation - Relevant accessory package for multiple stationary machines - Useful addition for woodworking shops, carpentry shops, training workshops, and makerspaces No warranty

Condition: as good as new (ex-display), Code: 0470 Brand: HAMMER - FELDER - AUSTRIA Prsdpszqrvcofx Abpja Model: A 2 - 26 - CE Standard 2-Works combined machine (surface planer /thickness planer ) – CE Standard Single-phase motor Planer table width 260 mm Thickness height 184 mm Tilting planer guide Max chip removal 3 mm Wheels on the base

Condition: as good as new (ex-display), Code: 0466 Pedpjzqd D Eofx Abpera Brand: FELDER - AUSTRIA Model: D 963 - CE Standard Automatic thickness planer with Silent Power low-noise spindle and Digi Drive positioning system - CE Standard Working width 630 mm Working height 3–300 mm Max chip removal 8 mm Variable feed speed from 4 to 16 mt/min Planer spindle with Silent Power spiral cutters with reversible HM blades Digi Drive automatic positioning system

Condition: as good as new (ex-display), Code: 0467 Brand: FELDER - AUSTRIA Model: RL 160 - CE Standard Mobile industrial clean-air dust collector – CE Standard Max air flow rate 3200 m³/h Pedpfx Ajzqr Ewjbpera Nominal air flow rate 20 m/s 1450 m³/h Nominal vacuum 20 m/s 2400 Pa Suction connection diameter 160 mm Cartridge filter Sound pressure level 70 dB Chip collection capacity 2 x 200 l Powder fire extinguisher Overall dimensions mm 1765 x 898 x 2065 h

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, operating hours: 1,800 h, power: 19 kW (25.83 HP), input voltage: 400 V, input current: 40 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 250 mm, workpiece length (max.): 3,300 mm, workpiece width (max.): 1,280 mm, workpiece height (max.): 150 mm, number of axes: 4, number of slots in tool magazine: 41, controller manufacturer: Tpa Srl – Tecnologie e Prodotti per l'Automazione, actuation type: electric, Equipment: USB port, documentation/manual, PRICE INCLUDES TRANSPORT We offer this very good FORMAT4 PROFIT H200 13.33 machining center. The machine is equipped with 4th axis spindle and max-version drilling head. It only worked about 1800 hours and has some small marks from usage. In the bundle we will provide everything that came with the machine as well as additional suction cups. Milling tools and holders are not a part of the deal FOR NOW. Machine is working daily and is an excellent choice for any woodworking company. Type designation: PROFIT H200 13.33 Serial number: 302.07.040.20 Code: 0491 Supply voltage: 400.0 V Phase: 3P+N Frequency: 50/60 Hz Current: 40.0 A Power: 19.0 kW Year of construction: 2020 year Control voltage: 24 VDC Minimum fuse: 47 A Maximum fuse: 64 A Minimum compressed air pressure: 8 bar Air consumption: 350 Nl/min Prsdpfx Asy Dcvvebpoa If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2021, functionality: fully functional, Format panel saw / table saw Format4 Kappa 550 by Felder, purchased on May 26, 2021, for precise longitudinal, transverse, and miter cuts in wood and panel materials. Professional saw for carpentry, interior design, and workshop use. Key technical data: - Machine type: Format panel saw / table saw - Saw blade diameter: 250–550 mm - Max. cutting height: approx. 202 mm at 90° / approx. 140 mm at 45° - Swivel range of saw unit: 0°–46° - Cutting width: approx. 1000 / 1250 / 1600 mm, depending on the model - Cutting length: approx. 2200–3700 mm, depending on the model - Speeds: 3000 / 4000 / 5000 rpm, optionally continuously variable 2000–6000 rpm - Motor power: approx. 7.5 kW, optionally higher depending on the configuration - Precise format table for repeatable, accurate cuts - Suitable for solid wood, panel materials, and dimensionally accurate furniture / interior design work - Core machine for professional woodworking shops, carpentry shops, training workshops, and makerspaces Prodpfx Aezuywijbpea No warranty

Condition: used, Year of construction: 2020, max. workpiece length 3740 mm profile spindle 1 Stück main drive 15 kW Control CNC Felder Format4 Type Profit H500S 16.38 CNC Machining Center to be sold on behalf of our customer ----- - From a wood window manufacturing company. - Machine still connected and ready for demonstration - Without machining tools Technical description (summary, full text see PDF): ----- Working dimensions: X = 3,740 mm Y = 1,570 mm Z = 350 mm clearance height (from console level), depending on clamping system, see layout. Travel: X = 4,930 mm Y = 1,925 mm Z = 500 mm Axis positioning speed: X = 80 m/min Y = 80 m/min Z1 = 30 m/min Z2 = 20 m/min - 5-axis milling spindle: 15 kW HSK F63 with liquid cooling, 1,000 - 24,000 rpm - Additional C-axis locking - Drilling head DH 18 6H1S: Vertical drilling unit with 12 spindles (7 spindles in the X direction, 5 spindles in the Y direction, grooving saw in the X direction) Horizontal drilling unit with 6 spindles, 4 spindles in the X direction and 2 spindles in the Y direction. 1 groove saw in the X direction, max. diameter 120 mm - Tool changer with 24 tool positions on the right side of the machine stand max. workpiece diameter 240 mm max. tool height 370 mm - Tool changer for circular saw blade mounted on the boom/tool changer max. saw blade diameter 350 mm Prodpfxeyq Szte Abpoa - Tool changer on the left side of the machine stand with 10 tool positions. Max. workpiece diameter 180 mm Max. tool length 230/300 mm Collet spacing 110 mm - 24-position tool changer mounted on the boom, moving in the X-direction Max. workpiece diameter 240 mm Max. tool height 370 mm - Moving pick-up area for chip deflector plate - 6 workpiece supports with s-motion position control - 2 machining areas for pendulum machining - Vacuum pump 90 m³/h - Chip conveyor belt - Line laser for curved machining - Includes all existing solid wood clamps and vacuum suction cups - Automatic central lubrication - CE safety device - "WoodFLash" software Lamello Clamex P Macro Notching Macro software - "Greenline package" for reduced energy consumption ----- Price of the above machine on Inquiry! ----- NOTE VIDEO: Not an original video. The video is from the machine manufacturer and shows a machine of this type. (Technical specifications according to the manufacturer - without guarantee!) All prices quoted are net, plus VAT.

Condition: used, Year of construction: 2021, functionality: fully functional, Format4 Dual 51 planer and thicknesser from Felder, purchased on April 29, 2021, for precise planing and thicknessing of solid wood. Powerful combination machine for professional woodworking shops. Prjdpfxjzulhtj Abpoa Key technical data: - Machine type: Planer and thicknesser - Model: Format4 Dual 51 - Planing width: approx. 510 mm - Thicknessing width: approx. 504 mm - Thicknessing height: approx. 3–254 mm - Planing table length: approx. 2250 mm - Max. chip removal: approx. 8 mm - Feed rate: Vario-Feed approx. 4–16 m/min - Cutterhead: approx. 120 mm diameter, Silent-Power spiral cutterhead also possible depending on the configuration - Motor power: approx. 5.5 kW, optionally higher depending on the configuration - Combined design saves space compared to two separate machines - Central base machine for solid wood processing, furniture making and interior design - Attractive for carpentry shops, workshops and training companies No guarantee

Condition: used, Year of construction: 2021, Dust extraction system Manufacturer: Felder Type: RL 300 Year of manufacture: 2021 - Like new, never used - Technical data Prjdpfx Abszv Tmmepoa - Airflow rate: max. 6000 m3/h - Rated airflow rate at 20 m/s: 5090 m3/h - Negative pressure at the total connection at 20 m/s: 2680 Pa - Dust extraction connection (can be mounted on the left or right): 300 mm - Filter area: 50 m2 - Sound pressure: 75 dB - Chip collection container (liters): 2 x 250 l Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: as good as new (ex-display), functionality: fully functional, overall weight: 850 kg, power: 5.52 kW (7.51 HP), input voltage: 400 V, input frequency: 50 Hz, grinding width: 650 mm, Further technical data Predpfxew Axi Ao Abpja Grinding height: 3 mm - 200 mm (250 mm) Grinding width: 650 mm Dust extraction connection: 2 x 120 mm Feed rate: continuously variable 2.5-10 m/min Standard equipment Maintenance interval display Plain text error messages Constant infeed height – fixed table, 900 mm Electric height adjustment including fine adjustment from the control panel Feed rate continuously variable from 2.5-10 m/min, adjustable via inverter from the control panel Endless belt conveyor Automatic feed belt centering 1st brush unit with selectable steel brush, counter-rotating operation, mechanically pre-tensioned rubber pressure rollers, 1 motor with 4 kW and cutting speed of 1000 rpm 2nd brush unit with Tynex brush K60 D=200mm, counter-rotating operation, mechanically pre-tensioned rubber pressure rollers, 1 motor with 4 kW and cutting speed of 1000 rpm Dimensions: 1455 x 1070 x 1250 mm Required air pressure: 6 bar Optional equipment 022 7.5 hp (5.5 kW) motor power for 1st unit 024 7.5 hp (5.5 kW) motor power for 2nd unit 027 Oscillation control for 1st and 2nd brush unit

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, For sale is a Format4 c-express 920 classic CNC drilling and dowel processing center from Felder. This machine is ideally suited for efficient processing of carcass and furniture components. It enables precise drilling, milling, and dowel processing and is particularly designed for carpentry shops, joineries, and furniture manufacturing. Thanks to its compact design and powerful CNC control, the processing center is ideal for economical single-piece and series production. The machine is in a well-maintained, used condition and can be inspected and tested under power by appointment. Technical data: Manufacturer: Format4 (Felder Group) Type: c-express 920 classic with additional front and rear support roller tables Operating hours: approx. 800 Year of manufacture: 2016 LxWxH: 2100x1605x1950mm Weight: 850kg Motor power drilling head: 1.5kW Drilling head speed: 3600 rpm Circular saw unit speed: 9000 rpm Horizontal spindles (max.): 2+2, 1+1 Vertical spindle (max.): 9 Distance between horizontal spindles: 32mm Distance between vertical spindles: 32mm Diameter horizontal spindles max.: 15mm Diameter vertical spindles max.: 8 x 15 mm, 1 x 35 mm Diameter circular saw blade max.: 100mm Max. drilling depth: Horizontal 30mm, Vertical 55mm Pedpfx Aezrwmiobpjra Voltage: 400 V 3 phases Frequency: 50 Hz Connected load: 7.0 kW Operating mode: S6 40 % CNC-controlled processing center Automatic workpiece feed Operating PC with screen, keyboard, and mouse Foot switch Dust extraction connection Drilling and dowel processing Workpiece support table with rollers Safety enclosure Application areas: Furniture manufacturing Carcass production Dowel processing Drilling patterns Row drilling Hardware drilling Interior construction Carpentry Joinery The machine can be inspected and tested under power by appointment. Transport is possible for an extra charge! The machine will be inspected before sale. Technical data and equipment may vary. Errors, prior sale, and changes are subject to change. All information without guarantee.