Used Felder Bf 6 41 for sale (120)

Condition: ready for operation (used), Year of construction: 2016, Felder clean air extraction unit | Dust extraction system RL 200 | Ø 200 mm Maximum flow rate: 4000 m³/h Nominal flow rate: 20 m/sec, 2300 m³/h Valve pressure: 2380 Pa Filter area: 20 m² Extraction connection diameter: 200 mm Bodewa Rlkopfx Abzsww Residual dust content: < 0.1 mg/m³ Felder Briquetting Press FBP 50 Briquette diameter: 50 mm Throughput: 30–50 kg/h Motor power: 4 kW Dimensions (L x W): 1750 x 1270 mm Weight: 950 kg Hydraulic oil capacity: 125 liters Year of manufacture: 2016 Condition: Ready for use Price: €15,500 The system has already been dismantled and is stored in the Raasdorf warehouse.

Condition: like new (used), Year of construction: 2023, operating hours: 1,131 h, functionality: fully functional, machine/vehicle number: 220.09.023.23, feed rate X-axis: 18 m/min, workpiece height (max.): 60 mm, edge thickness (max.): 6 mm, Edge thickness...0,4-3 (6) mm Panel thickness...8-60 mm Feed speed.. 10+18 m/min. Aggregates: Spraying unit top and bottom - Separating agent Joint trimming unit - dia tools Edge (coil+strips) magazine Quickly changeable application unit + 1 additional, "Easyclean" system "Glue box" system Pressure zone - 1+2 rollers, pneumatical Spraying unit - lubricating agent Guillotine for coil edge 0,4-3 mm End trimming unit 2x0,35 kW, 200 Hz, tilt-able 0-10° Bwedev Rlziepfx Abzsw Trimming unit - R2+flat, 2 x 0,75 kW, 200 Hz Profile scraping unit, R2, pneumatically ON/OFF Corner rounding unit, 2 motors, servo adjustment Flat scraping unit in nesting execution, pneumatically ON/OFF Buffing unit Spraying unit top and bottom, cleaning agent Condition: Machine is like new, only 19 km of edge was done

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, total length: 3,350 mm, workpiece height (max.): 45 mm, total width: 1,510 mm, edge thickness (max.): 45 mm, total height: 1,640 mm, overall weight: 770 kg, extraction nozzle diameter: 60 mm, We offer for sale a professional edge banding machine with pre-milling unit of the company FELDER model G480. Below you will find some useful information about the machine: * Year of production - 2017 * Equipped with the Schugoma hot-air system for zero joints * Connected load - 7 kW * Edge thickness - 0.4-350 mm * Thickness of the sheets - 8-45 mm * Minimum width/length of the sheet - 70/210 mm * feed speed - 9 m/min * has a pre-milling and corner rounding unit Bsdpfx Ajtp T Dtjbzjww * Automatic feeding of edges from a roll * Impact shears for PVC and ABS edges up to a thickness of 3 mm. * Teflon glue tank with a capacity of 1.2 kg. * Saw blade cutting unit with 12,000 rpm. * Rotating control panel with LCD display. * Suction nozzle - 7 x 60 mm * Weight approx. 770 kg * Overall dimensions 335 x 151 x 164 cm (Wx Lx H) * Perfect technical and visual condition

Condition: used, Panel saw-milling machine Hammer B3 Perform, very good condition, 4 kW, 2500 mm format table length Bwedpjvr I I Uefx Abzow Prices subject to change, errors, printing and typesetting errors reserved

Condition: good (used), Felder saw in nice condition. Has only had occasional use so in nice condition. Bedporubg Hefx Abzsww

Condition: ready for operation (used), Year of construction: 2016, operating hours: 5,213 h, functionality: fully functional, machine/vehicle number: 302.09.016.16, travel distance X-axis: 4,010 mm, travel distance Y-axis: 1,970 mm, travel distance Z-axis: 455 mm, number of slots in tool magazine: 18, saw blade diameter: 350 mm, TECHNICAL DETAILS Number of axes: 5 Table dimensions (L × W): 5,000 × 1,550 mm X-axis working area: 4,010 mm Bwsdpfx Abswkq Tpezow Y-axis working area: 1,970 mm Z-axis working area: 455 mm Travel speeds X-axis travel speed: 70 m/min Y-axis travel speed: 70 m/min Z-axis travel speed: 23 m/min Tool and saw unit Tool changer: 18 positions Saw blade diameter: 350 mm Extraction and vacuum Vacuum pump capacity: 90 m³/h Extraction connection diameter: 300 mm Extraction capacity: 5,100 m³/h MACHINE DETAILS Operating hours: 5,213 h Voltage: 400 V Current consumption: 46 A Air pressure: 8 bar Machine weight: 4,100 kg EQUIPMENT - Wood Flash software - 3D simulator included - Documentation available - CE marking present - Note: Vacuum pump bearings must be replaced

Condition: like new (used), Year of construction: 2014, X-axis feed rate: 9 m/min Total length: 3,200 mm Workpiece height (max.): 45 mm Bwsdpfx Abjwat Aljzsw Edge thickness (max.): 3 mm Height adjustment type: mechanical Input voltage: 400 V Chip removal: 2 mm Technical specifications Year of manufacture: 2014 Edge thickness: 0.4-3.0 mm Motor voltage: 3 x 400 V Motor frequency: 50 Hz Min. workpiece length: 210 mm Min. workpiece width: 70 mm Workpiece height: 8-45 mm Chain feed: 9 m/min Cross-cut saw unit: Yes Radius scraper unit: Yes Surface scraper: Yes CE-certified version Joining unit with a chip removal rate of up to 2 mm Automatic feeding of roll materials Individual feeding of strip materials Gun-type shear for rigid PVC/ABS up to 3 mm thick Glue application using Glue roller Cross-cut saw unit, 12,000 rpm, 0.27 kW 2 carbide saw blades, 100 mm diameter, 24 teeth Multifunctional milling unit with 2 HF motors with 0.35 kW for radius, flush, and chamfer milling for thin edges Extraction connection: 2 x 80 mm, 1 x 120 mm Max. connected load: 7.5 kW at 3 x 400 V / 50 Hz

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 60.07.024.04, cutting width (max.): 1,250 mm, table length: 3,200 mm, rotational speed (min.): 3,200 rpm, rotational speed (max.): 4,500 rpm, input voltage: 400 V, power: 11 kW (14.96 HP), sliding table width: 400 mm, Type: KAPPO 450. Machine no.: 60.07.024.04, year of manufacture: 2004, power supply: 3/400V/50Hz/21 Amp, table size: 3200x400 mm, height adjustment: motorized, tilting: motorized. Bjdpow Ddzgsfx Abzeww

Condition: ready for operation (used), Year of construction: 2002, Brand: Felder Modell: FS2200 Year of manufacture: 2002 With sanding shoe in good condition Driven left and right Tech. info: Work table size: 2200x800 mm Wheel diameter: 250 mm Band width: 150 mm Belt length: 6200 mm Chip nozzle: 160 mm Motor: 4 kW, 50 Hz, 380V, 3-phase Bwjdpfjth R Tlsx Abzow Size for transport: 320x110x145 cm Stock no: 2002056

Condition: used, Felder FS37 panel saw-milling machine, 3 kW, 2000 mm cutting length, 100 mm cutting height, 2000 mm table length Bsdevr I Nfspfx Abzsww Prices subject to change, errors, printing and typesetting errors reserved

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, negative pressure: 2,630 Pa, volume flow: 8,000 m³/h, nominal flow rate: 6,950 m³/h, power: 11 kW (14.96 HP), H 3 "GS dust-tested" Extraction connection 350 mm Ø Pneumatic JET filter cleaning Extinguishing system with powder extinguisher With rotary air lock Bjdswty Uzjpfx Abzoww

Condition: good (used), Year of construction: 2023, functionality: fully functional, cutting length (max.): 3,700 mm, cutting width (max.): 1,250 mm, cutting width at rip fence: 1,250 mm, cutting height (max.): 155 mm, saw blade diameter: 450 mm, table length: 3,700 mm, main saw diameter: 450 mm, height adjustment type: electric, rotational speed (min.): 3,500 rpm, rotational speed (max.): 5,500 rpm, input voltage: 400 V, pivoting range: 45 °, input frequency: 50 Hz, power: 5.5 kW (7.48 HP), sliding table length: 3,700 mm, Equipment: motor brake, scorer, Newly used Felder K945S sliding table saw with 3,700 mm roller table, well equipped and in working order! 3,700 mm X-roll roller table Remote control on/off switch Digital readout window, cutting width up to 1,250 mm PowerDrive K2 pack for height and angle adjustment Scoring unit, electric height adjustment 7.5 hp, up to 450 mm saw blade Scoring unit with its own motor, 120 mm blade diameter Narrow and wide hood Swivels up to 45 (45.3) degrees Immediately available from stock. Bedjwath Uspfx Abzjww

Condition: like new (used), Felder FST 160 Sanding Table Dimensions 16660 x 1020 mm Adjustable working height 726 - 1026 mm Exhaust connection 140 mm Required air volume 1500 m³/h Weight 120 kg In mint condition Bjdpfjv Up A Esx Abzoww Price 950.-

Condition: used, machine/vehicle number: G-KF131799aH, Format circular saw milling machine Hammer B3 Winner, year of manufacture 2023, as new, standard equipment, 2x3 kW, 2000 mm table length, 500 kg Bsdjvw Ectepfx Abzeww Prices subject to change, errors, printing and typesetting errors reserved

Condition: ready for operation (used), Year of construction: 2012, operating hours: 1,555 h, machine/vehicle number: CA.03.013.12, Edge banding machine FELDER G400, used machine / condition as coming in from customer. Machine is functional tested and OK. Without service / warranty for this price. Free loaded into your truck/trailer. Bwjdpsng H Uvefx Abzow Directly available ex works Barneveld (NL)

Condition: used, machine/vehicle number: G-KR114377bH, Felder K7 circular saw, very good condition, 3000 mm table length, 600 kg Bjdpfx Absvw Ecyozeww Prices subject to change, errors, printing and typesetting errors reserved

Condition: used, Band saw Felder FB510, year of manufacture 2019, very good condition, standard equipment Prices subject to change, errors, printing and typesetting errors reserved Bwjdevr I I Iepfx Abzjw

Condition: used, Circular saw K500, year of manufacture 2021, very good condition, 1300 mm table length, 4 kW, 102 mm cutting height, approx. 350 kg Prices subject to change, errors, printing and typesetting errors reserved Bwodpjvr I Nrefx Abzow

Condition: used, Felder K700 panel saw, year of manufacture 2006, good condition, 880 mm table width, 100 mm cutting height, 1300 mm panel table length, approx. 300 kg Bedpfx Asvrvluebzjww Prices subject to change, errors, printing and typesetting errors reserved

Condition: used, Felder K7X circular saw, good condition Bwsdpfx Abewzzicjzew Subject to price changes, errors, misprints and typographical errors excepted.