Used Felder Bf6 for sale (121)

Condition: ready for operation (used), Year of construction: 2016, Felder clean air extraction unit | Dust extraction system RL 200 | Ø 200 mm Maximum flow rate: 4000 m³/h Nominal flow rate: 20 m/sec, 2300 m³/h Valve pressure: 2380 Pa Filter area: 20 m² Extraction connection diameter: 200 mm Pgodewa Rlkepfx Aaheu Residual dust content: < 0.1 mg/m³ Felder Briquetting Press FBP 50 Briquette diameter: 50 mm Throughput: 30–50 kg/h Motor power: 4 kW Dimensions (L x W): 1750 x 1270 mm Weight: 950 kg Hydraulic oil capacity: 125 liters Year of manufacture: 2016 Condition: Ready for use Price: €15,500 The system has already been dismantled and is stored in the Raasdorf warehouse.

Condition: like new (used), Year of construction: 2023, operating hours: 1,131 h, functionality: fully functional, machine/vehicle number: 220.09.023.23, feed rate X-axis: 18 m/min, workpiece height (max.): 60 mm, edge thickness (max.): 6 mm, Edge thickness...0,4-3 (6) mm Panel thickness...8-60 mm Feed speed.. 10+18 m/min. Aggregates: Spraying unit top and bottom - Separating agent Joint trimming unit - dia tools Edge (coil+strips) magazine Quickly changeable application unit + 1 additional, "Easyclean" system "Glue box" system Pressure zone - 1+2 rollers, pneumatical Spraying unit - lubricating agent Guillotine for coil edge 0,4-3 mm End trimming unit 2x0,35 kW, 200 Hz, tilt-able 0-10° Trimming unit - R2+flat, 2 x 0,75 kW, 200 Hz Pgjdpfx Aaev Rlzishou Profile scraping unit, R2, pneumatically ON/OFF Corner rounding unit, 2 motors, servo adjustment Flat scraping unit in nesting execution, pneumatically ON/OFF Buffing unit Spraying unit top and bottom, cleaning agent Condition: Machine is like new, only 19 km of edge was done

Condition: used, Panel saw-milling machine Hammer B3 Perform, very good condition, 4 kW, 2500 mm format table length Pjdpfxsvr I I Us Aahsgu Prices subject to change, errors, printing and typesetting errors reserved

Condition: ready for operation (used), Year of construction: 2016, operating hours: 5,213 h, functionality: fully functional, machine/vehicle number: 302.09.016.16, travel distance X-axis: 4,010 mm, travel distance Y-axis: 1,970 mm, travel distance Z-axis: 455 mm, number of slots in tool magazine: 18, saw blade diameter: 350 mm, TECHNICAL DETAILS Number of axes: 5 Table dimensions (L × W): 5,000 × 1,550 mm X-axis working area: 4,010 mm Pgedpfx Aaewkq Tpshju Y-axis working area: 1,970 mm Z-axis working area: 455 mm Travel speeds X-axis travel speed: 70 m/min Y-axis travel speed: 70 m/min Z-axis travel speed: 23 m/min Tool and saw unit Tool changer: 18 positions Saw blade diameter: 350 mm Extraction and vacuum Vacuum pump capacity: 90 m³/h Extraction connection diameter: 300 mm Extraction capacity: 5,100 m³/h MACHINE DETAILS Operating hours: 5,213 h Voltage: 400 V Current consumption: 46 A Air pressure: 8 bar Machine weight: 4,100 kg EQUIPMENT - Wood Flash software - 3D simulator included - Documentation available - CE marking present - Note: Vacuum pump bearings must be replaced

Condition: ready for operation (used), Year of construction: 2002, Brand: Felder Modell: FS2200 Year of manufacture: 2002 With sanding shoe in good condition Driven left and right Tech. info: Work table size: 2200x800 mm Wheel diameter: 250 mm Band width: 150 mm Belt length: 6200 mm Podpfx Aajth R Tlshegu Chip nozzle: 160 mm Motor: 4 kW, 50 Hz, 380V, 3-phase Size for transport: 320x110x145 cm Stock no: 2002056

Condition: good (used), - with nesting package - interchangeable glue basin - always serviced - low mileage Pgodpfxstya T Ne Aaheu

Condition: like new (used), Year of construction: 2014, X-axis feed rate: 9 m/min Total length: 3,200 mm Workpiece height (max.): 45 mm Edge thickness (max.): 3 mm Height adjustment type: mechanical Input voltage: 400 V Chip removal: 2 mm Technical specifications Year of manufacture: 2014 Edge thickness: 0.4-3.0 mm Motor voltage: 3 x 400 V Motor frequency: 50 Hz Pgedpfxowat Alj Aahju Min. workpiece length: 210 mm Min. workpiece width: 70 mm Workpiece height: 8-45 mm Chain feed: 9 m/min Cross-cut saw unit: Yes Radius scraper unit: Yes Surface scraper: Yes CE-certified version Joining unit with a chip removal rate of up to 2 mm Automatic feeding of roll materials Individual feeding of strip materials Gun-type shear for rigid PVC/ABS up to 3 mm thick Glue application using Glue roller Cross-cut saw unit, 12,000 rpm, 0.27 kW 2 carbide saw blades, 100 mm diameter, 24 teeth Multifunctional milling unit with 2 HF motors with 0.35 kW for radius, flush, and chamfer milling for thin edges Extraction connection: 2 x 80 mm, 1 x 120 mm Max. connected load: 7.5 kW at 3 x 400 V / 50 Hz

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, negative pressure: 2,630 Pa, volume flow: 8,000 m³/h, nominal flow rate: 6,950 m³/h, power: 11 kW (14.96 HP), H 3 "GS dust-tested" Extraction connection 350 mm Ø Pneumatic JET filter cleaning Extinguishing system with powder extinguisher With rotary air lock Pgjdpfewty Uzex Aaheu

Condition: used, Felder FS37 panel saw-milling machine, 3 kW, 2000 mm cutting length, 100 mm cutting height, 2000 mm table length Pgsdpfx Aaevr I Nfoheu Prices subject to change, errors, printing and typesetting errors reserved

Condition: good (used), Year of construction: 2023, functionality: fully functional, cutting length (max.): 3,700 mm, cutting width (max.): 1,250 mm, cutting width at rip fence: 1,250 mm, cutting height (max.): 155 mm, saw blade diameter: 450 mm, table length: 3,700 mm, main saw diameter: 450 mm, height adjustment type: electric, rotational speed (min.): 3,500 rpm, rotational speed (max.): 5,500 rpm, input voltage: 400 V, pivoting range: 45 °, input frequency: 50 Hz, power: 5.5 kW (7.48 HP), sliding table length: 3,700 mm, Equipment: motor brake, scorer, Newly used Felder K945S sliding table saw with 3,700 mm roller table, well equipped and in working order! 3,700 mm X-roll roller table Remote control on/off switch Digital readout window, cutting width up to 1,250 mm PowerDrive K2 pack for height and angle adjustment Scoring unit, electric height adjustment 7.5 hp, up to 450 mm saw blade Scoring unit with its own motor, 120 mm blade diameter Narrow and wide hood Swivels up to 45 (45.3) degrees Immediately available from stock. Podpfowath Uox Aahogu

Condition: like new (used), Felder FST 160 Sanding Table Psdpfxsv Up A Eo Aahogu Dimensions 16660 x 1020 mm Adjustable working height 726 - 1026 mm Exhaust connection 140 mm Required air volume 1500 m³/h Weight 120 kg In mint condition Price 950.-

Condition: used, machine/vehicle number: G-KF131799aH, Format circular saw milling machine Hammer B3 Winner, year of manufacture 2023, as new, standard equipment, 2x3 kW, 2000 mm table length, 500 kg Podpfxsvw Ecte Aahegu Prices subject to change, errors, printing and typesetting errors reserved

Condition: ready for operation (used), Year of construction: 2012, operating hours: 1,555 h, machine/vehicle number: CA.03.013.12, Edge banding machine FELDER G400, used machine / condition as coming in from customer. Psdpsng H Uvofx Aahsgu Machine is functional tested and OK. Without service / warranty for this price. Free loaded into your truck/trailer. Directly available ex works Barneveld (NL)

Condition: used, machine/vehicle number: G-KR114377bH, Felder K7 circular saw, very good condition, 3000 mm table length, 600 kg Pedpfx Asvw Ecysahjgu Prices subject to change, errors, printing and typesetting errors reserved

Condition: used, Band saw Felder FB510, year of manufacture 2019, very good condition, standard equipment Prices subject to change, errors, printing and typesetting errors reserved Pjdpevr I I Isfx Aahjgu

Condition: used, Felder K7X circular saw, good condition Pedpfx Aaewzzicshsgu Subject to price changes, errors, misprints and typographical errors excepted.

Condition: used, Circular saw K500, year of manufacture 2021, very good condition, 1300 mm table length, 4 kW, 102 mm cutting height, approx. 350 kg Pgodpovr I Nrofx Aahsu Prices subject to change, errors, printing and typesetting errors reserved

Condition: used, 4-way combi fields BF5-41, year of manufacture 1988, good condition, new aluminum format table, 3 kW, 4 knives, approx. 600 kg Psdovrviyepfx Aahegu Prices subject to change, errors, printing and typesetting errors reserved

Condition: used, AD planer Felder AD741, very good condition, year of manufacture 2003, 4 kW S6, 400 V, 410 mm table length, 2000 mm table width, 4 knives, approx. 400 kg Prices subject to change, errors, printing and typesetting errors reserved Pgsdovrvkdspfx Aahou

Condition: used, Felder K700 panel saw, year of manufacture 2006, good condition, 880 mm table width, 100 mm cutting height, 1300 mm panel table length, approx. 300 kg Psdpfovrvluox Aahsgu Prices subject to change, errors, printing and typesetting errors reserved

Condition: used, machine/vehicle number: G-ADHM118054aR, AD planer Hammer A3-41, year of manufacture 2019, very good condition, including reversible blade and chassis, 4 kW, 1800 mm table length, 410 mm table width, 3 blades, 350 kg Pgodpfxjvw Ebpo Aahou Prices subject to change, errors, printing and typesetting errors reserved