Panel saw Felder HAMMER K3

Felder HAMMER K3

Condition: good (used), Code: 0424 Brand: DMC - ITALY Model: EUROPA 120 Automatic 2-belt calibrating sanding machine for wood, furniture, furnishings, wooden frames, doors, panels, composite materials and various Hjdpfsv A Ta Dsx Adwofb Technical data: Sturdy construction Max working width mm 1200 Max working height mm 170 Abrasive belt size mm 2200 x 1250 1° Group Rubber Calibrating Roller - Diameter mm 220 - Adjustable workpiece holding pressure brackets - Motor Hp 20 2° Group Finishing Pad with adjustable pressure - Motor Hp 10 Abrasive belt cleaning blowers Belt feed speed variator from 3,5 to 17,5 mt/min Vacuum table - Motor Hp 7,5 Automatic table lifting Automatic table positioning N° 2 suction inlets diameter mm 200 Working pressure 7 bar Overall dimensions mm 1900 x 1800 x 2100 h Weight kg 2500

Condition: used, Year of construction: 1976, Used machine Year of manufacture: 1976 Equipment and technical data: - Bottom sanding Hfodpfx Aswpm I Tsdwob - Material feed via rubber rollers - Contactless oscillation control - Quick-change pressure beam - Electromotive adjustment of tool thickness with easily readable digital display - Pushbutton with contactor control - Sanding width: 1350 mm - Maximum workpiece thickness: 150 mm - Sanding belt width: 1360 mm - Sanding belt length: 1900 mm - Roller feed switchable between 10 and 20 m/min - Compressed air connection: 6 bar - Air consumption: approx. 180 NL/min Availability: short-term Storage location: 63934 Röllbach

Condition: used, Year of construction: 1984, Used machine Year of manufacture: 1984 Condition: fully inspected and serviced Features and technical data: - Includes combination unit with contact roller and sanding pad - Height-adjustable contact roller for calibration - Air-cushion pressure pad controlled by the workpiece - 4-way adjustable grit compensation - Pneumatic belt tensioning device - Rotating texturing brush at the outfeed side of the machine - Sanding width: 1350 mm - Sanding belt length: 1900 mm - Passage height: 150 mm - Main motor: 15 kW - Infinitely adjustable feed speed: 2.5 – 12.5 m/min - Infeed roller table - Separate, additional texturing brush - Outfeed roller table - Digital display device for the electrically powered workpiece thickness adjustment - Automatic workpiece thickness adjustment - Extraction sockets: 2 x 200 mm - Feed belt is functional; damaged at one location (see photo) Dimensions: approx. 2300 x 2000 x 2300 mm Weight approx.: 2500 kg The images show the machine in a condition prior to inspection! Location: Röllbach Hfsdpfx Aew R Hh Ujdwob Availability: approx. 4–6 weeks after order confirmation

Condition: good (used), two-arm drill, rotary drill, magnetic drill -Recording: MK2 -Nominal power input: 1150 W -Connection: 230 volts -Max. drill diameter: 23 mm -Dimensions: 460/320/H100 mm -Weight: 6 kg Hjdpsb A N H Nsfx Adwofb

Condition: used, Year of construction: 1993, functionality: fully functional, Panel saw, spindle moulder, combination machine, table saw, circular saw, carpenter’s saw, panel dividing saw, table router, tilting spindle moulder FELDER Model: KFS37 FL Year: 1993 Sliding table length: 245 cm Manual height adjustment of the saw blade Manual tilting of the saw blade up to 45° Rip fence with fine adjustment, up to approx. 75 cm Outrigger table with extendable crosscut fence Mitre fence Main motor power: 3 kW Tilting spindle moulder Manual height adjustment of the tilting spindle Manual tilting of the moulder spindle up to 45° to the rear Spindle diameter: 30 mm 3 spindle speeds, adjustable via belt Spindle can be lowered below table level and removed Spindle moulder motor power: 3 kW Cutter fence with fine adjustment and parallel guidance—Felder multi-adjustment system Fold-away support for power feeder Eccentric workpiece clamp Hsdpfx Adoxycy Rjwjfb Prior inspection is expressly recommended; please leave your telephone number by email and I will contact you to arrange a viewing appointment. Subject to prior sale. All information provided without guarantee. Machines can be collected in person or shipped by freight at the buyer’s expense. Loading and packaging can be organised by us. The quoted shipping costs are indicative; actual costs may vary depending on location and unloading facilities, please enquire. The item is offered under differential taxation. The displayed sales price is the gross final price. An invoice showing VAT separately will not be issued. Basis of warranty: Due to age and wear, sale is exclusively to commercial buyers with no warranty, guarantee, or return the claim. All information is without guarantee. By placing a bid, the buyer acknowledges this. For used items, warranty is 12 months if the buyer is a consumer within the meaning of §13 BGB. If the buyer is an entrepreneur within the meaning of §14 BGB, all warranties are excluded. For new items, warranty is 24 months if the buyer is a consumer within the meaning of §13 BGB. If the buyer is an entrepreneur within the meaning of §14 BGB, the warranty is 12 months.

Condition: new, - NEW -GENERAL FEATURES:machine frame and worktable* steel structure with electrical cabinet at the front of the machine* sanding belt infeed from the left side of the machine* motorized table height adjustment* main motor integrated in the machine frameelectrical equipment* electromechanical control panel on the front left side of the machine* automatic star-delta start for the main motor* motor protection switch for the motors* motors in insulation class IP 54emergency and protective devices* Safety microswitch for excess thickness* Automatic brake for immediate stopping of the units* Emergency stop safety edge in the workpiece infeed* Mushroom switch in the workpiece infeed and outfeed* Lockable main switch* Automatic emergency shutdown of the machine in the event of:- sanding belt breakage- untensioned sanding belt- protection against lateral movement of the sanding belt- lack of compressed air- overload of the main motorsNote: the standard version with 400 volts 50 Hz requires a three-phase power supply zero conductor ground the 400 volt power supply is without neutral, a single-phase transformer from the price list must also be ordered. The same transformer must also be ordered for a machine with a voltage higher than 400 volts, regardless of whether a neutral conductor is present or machine version with 220 or 230 volts (50 or 60 Hz) is subject to additional costs (see price list).BASIC MACHINE STANDARD EQUIPMENT- R140/85 rubber-coated calibrating roller diam. 140 mm 85 Sh - 1st pos.- R160/45 rubber-coated sanding roller diam. 160 mm 45 Sh - 2nd pos.- Hard sanding pad with manual adjustment of the working height- Main motor 11 kW (15 HP)- Electronic ammeter for the main motor to display the power consumption- Electronic display of the working height- Electronically controlled sanding belt oscillation- Rubber pressure rollers- Kickback protection in the infeed in front of the first unit- Rubber feed carpet 60 Sh- Roller table with two rollers in the infeed and outfeed of the work table- Carpet feed with two speeds 4,5 / 9 m/min withgeared motor- automatic carpet centeringworking width mm 1.100Min./Max. working height mm 4 - 170Sanding belt width mm 1,115Sanding belt length mm 2,150Main motor power kW (HP) 11 (15)Gear motor kW (HP) 0.45/0.8 (0.6/1.1)Feed speed m/min 4.5/9Consisting of:10.90.87 European Safety Regulations(Mark C.E.)93.07.31 Volt 400 EU93.12.01 Frequency 50 Hz44.44.19 Version "B" for RCS33.31.50 Roller table in infeed and outfeed for long workpieces62.44.50 10" control panel with "eye-S" software integration31.21.60 "RA" inclined ribbed steel contact roller - 1st unit97.50.71 Main motor 15 kW (PS 20) Hfodpfsvwfrnsx Adweb

Condition: good (used), two-arm drill, rotary drill, magnetic drill, impact drill, two-handed drill, core drill -Manufacturer: AEG, Two-handed drill type BZ 22 -Nominal power input: 660 W -Connection: 220 volts Hfedpfjvq Ic Asx Adweb -Speed: 2x speed 230/350 rpm, clockwise rotation only -Dimensions: 550/370/H110 mm -Weight: 7.6 kg

Year of construction: 2016, operating hours: 3 h, condition: excellent (used), machine/vehicle number: 6159327080, We are dissolving part of our demonstration tool inventory: Desoutter extended control ESP2-A for SLBN low-voltage screwdrivers Year of manufacture: 09/2016 Article no.: 6159327080 little used, fully functional without additional accessories Suitable for the following Desoutter screwdrivers:# -SLBN003 -SLBN010 -SLBN012 -SLBN020 -SLBN030 -SLBN050 -SLBN090 -SLBN120 The ESP2A is designed to optimize the performance of Desoutter SLBN screwdrivers, reduce your energy consumption and offer up to five program settings and PLC integration, including remote start and tool activation. In addition to the OK/NIO and group IO reporting, the ESP2A offers a wide range of rundown options including pre-run reversal, slow start, tightening phase and post-run reversal. Benefits Two tools can be connected to one ESP2A, offering unmatched flexibility and reduced installation costs. Improved production integration and traceability functionality to improve your product quality. Compatible with over 15 tools for a standardized platform, faster readjustments and lower total cost of ownership. Five cycles with 3 possible phases each offer versatility no matter where your production is headed. Multiple preset tightening strategies to replace multiple tools with a single one for a quick return on investment. Available in both lever-start and push-start tools from 0.07 N.m to 12 N.m with a full range of accessories for all your tightening needs. Fully compatible with a range of accessories to optimize your tightening process and ensure continued quality. Hsdjv Ipnzjpfx Adwofb Other tools for industrial manufacturing and maintenance on request.