Used Felder G 500 for sale (129)

Condition: excellent (used), Year of construction: 2017, operating hours: 100 h, functionality: fully functional, Edgebander , Felder G330 , Exelent , 2017/18 , Low working hours , Kedpfxoxz Ia So Aanefa Teflon Gluepot , Quck system adjustment , Flat scraping for finisin Unit ,

Condition: excellent (used), Year of construction: 2024, operating hours: 279 h, functionality: fully functional, cutting length (max.): 3,200 mm, Well-maintained Format 4 Kappa 550 panel saw, acquired in 2024 as a refurbished demonstration unit. The machine’s actual year of manufacture is 2017. Equipped with a high-quality feature set. The main saw unit has only 279 operating hours (the scoring unit 22 h). Power: 10 kW Sliding table with X-Roll technology: 3,200 mm Electronically controlled height and tilt adjustment 0°–46° Saw blade diameter 250–550 mm, max. cutting height 202 mm Overhead guard, hood for 90° and hood for angled cuts E-motion control 15” color touchscreen display Electronically positioned rip fence with digital readout, cutting width 1250 mm Tools and replacement saw blades (main and scorer) included. #8455 Kjdsx H Tydspfx Aanefa

Condition: new, Year of construction: 2025, operating hours: 380 h, functionality: fully functional, machine/vehicle number: 220.02.004.25, The machine was purchased in January 2025 / delivered in April / used from April to July 2025. For sale due to redundancy following a merger with another joinery. The machine is like new. It features an infeed table with an air cushion, Edgebanding width up to 60 mm and solid edging up to 6 mm thick. Edge thickness milling unit Hot melt granule gluing station Edge trimming unit: ABS 2 mm / solid 6 mm Curve trimming unit for doors Surface scraper unit and edge scraper unit Kodpox Itpzefx Aanofa Cleaning unit 3 spray stations: antistatic / anti-scratch for edges / cleaning. Full details of all tools are listed on the attached purchase invoice.

Condition: like new (used), Year of construction: 2016, Demonstration Machine For sale is our Felder RL-200 clean air extraction unit from our showroom, featuring a maximum air flow rate of 2300 m³/h. The extraction unit is in like-new condition, has been inspected and refurbished by our qualified technicians. Technical data: - H3 dust tested - Extraction connection diameter: 200 mm - Automatic chip shaker - Steel impeller - Max. air flow rate: 2300 m³/h Kfsdpfx Aasxxkr Ssnsa - incl. briquette press FBP 60 (50-70 kg/h) - Year of manufacture: 2016 The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Related terms: extraction, extraction unit, clean air unit, clean air, RL, briquette press, briquetting Reference: R-A0117

Condition: excellent (used), Year of construction: 2010, 4 kW motor 4 knives Kedpfx Asul Utmoanofa Table length 198 cm Table width 41 cm

Condition: used, Year of construction: 2010, Machine operates perfectly, the front cleaning unit requires cleaning. Fully functional Year of manufacture: 2010 Radius scraper blade Flat scraper blade Kfedpfx Aox Hqdmsanea Cleaning unit Jointing cutter up to 3 mm Nesting milling unit Pneumatic insertion lock Polishing Machine no.: 200.07.011.10

Condition: excellent (used), Felder RL 250 Extraction Unit Capacity: 6200 m³/h Extraction port: 250 mm Chip container capacity: 500 L Kfsdpfx Aaox A Exujnsa Fire extinguishing system with water connection Motor: 5.5 kW Weight: 750 kg Very good condition

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, cutting height (max.): 104 mm, cutting width (max.): 800 mm, saw blade diameter: 315 mm, overall weight: 400 kg, input voltage: 400 V, power: 5.52 kW (7.51 HP), The powerful sliding table saw with tilting spindle moulder Standard Equipment: - 3x 400 V motor voltage - 50 Hz motor frequency - 7.5 HP (5.5 kW) with star-delta starter - Direction of rotation switch - Circular saw with saw blade tilting 90°–45°, max. cutting height 104 mm with 315 mm blade diameter, speed 4800 rpm - Cutting width 800 mm, min. transport width 800 mm - Parallel fence with digital readout - Extraction duct for 800 mm cutting width - Spindle moulder tilting 90°–45°, speeds: 3500/6500/8000/10,000 rpm - Spindle table opening (mm): 230 - Manual spindle tilting 90°–45° - Spindle fence 230 for max. tool diameter 230 mm, fence rails 400 mm - EURO spindle guard - MULTI-adjustment system for spindle fence “230” - Fence rails anodised aluminium - Sliding table, cutting length 1550 mm - Sliding table anodised - Outrigger table 1100 for sliding table 1300–2000 mm - Cross-cut fence 1100 mm, extendable to 2000 mm - Working height (mm): 890 - Min. transport width (mm): 800 - Extraction connection diameter (mm) saw/saw guard: 50 - Extraction connection diameter (mm) fence/under-table moulder: 120/80 - Weight (with standard equipment): 400 kg Special equipment included in the price: 008 7.5 HP (5.5 kW) 010 Star-delta starter Kfjdpfx Aex D Tk Ioanja 201 Electric height and angle adjustment for saw blade with LED display 119 Electric height and angle adjustment for spindle moulder with LED display 076 Cutting width 800 mm with full table length, min. transport width 800 mm 103 Spindle moulder shaft D=30 mm, 115 mm working height above table

Condition: excellent (used), Year of construction: 2014, Motor power: 7.5 HP (5.5 kW) Motor voltage: 400 V (50Hz) Planing width: 410 mm Planing shaft: 4-blade field system planing shaft No. of planing knives: 4 Planer table length: 2,200 mm Planer fence: 1,300 x 170 mm Chip removal: 5 mm Suction connection: 120 mm Kedpfx Aeh Hp Hyoanefa Weight: 510 kg Dressing guard EURO Standard Standard equipment - Planing shaft with 410 mm planing width - Infeed planer table with table length 1080 mm - Jointer fence with ruler 1300 x 170 mm - EURO Standard planer guard - 4-blade field system planing shaft Location: ex stock 54634 Bitburg - immediately available -

Condition: like new (used), DEMONSTRATION MACHINE For sale is a Felder FD-21 dowel boring machine. The machine is in use in our showroom and is therefore in mint condition. Technical data: - Version with 21 spindles - 2 hold-down clamps - 2 stops, each 1.5 m, for line boring - 2 side stops with reading optics - Indexing system for side stop with 8 positions - Motor power: 2 HP - Year of manufacture: 2025 The machine is located in A-5431 Kuchl and can be inspected and picked up during our opening hours at any time. Subject to prior sale! Kjdexxi T Uopfx Aanjfa Related terms: dowel milling machine, drilling machine, line boring Reference: R-A0117

Condition: like new (used), Year of construction: 2020, operating hours: 210 h, i speak english ,romanian, greek Kfodpfjiqywlex Aanja

Condition: new, Year of construction: 2025, Band saw BS940RS3"SP V400/3/50 HP 20 CE CE VERSION Manual blade tensioning Standard equipment Self-braking motor 400 V/3/50 Reinforced twin-column base Steel blade tensioning system with guide lubrication system Front emergency stop activated via cable Rear emergency stop button Robust flywheels (1/3 crown in front) without rubber Bronze scrapers on flywheels Gravity blade lubrication system with felt pad Automatic star-delta starter Blade tension indicator Rack-and-pinion blade guide elevation with integrated blade guard Blade width: max. 90 mm Blade is not included This configuration includes: - Upper and lower blade guides with bronze side elements; - Three-phase 400V/50Hz/20HP self-braking motor; - Horizontal transport pallet Ksdpfx Aasxzu Nmsnofa FEEDER RA260 ELP (SR026) V400/3/50*CE WE VERSION Pneumatic control – Electronic variable speed drive

Condition: excellent (used), Wide Belt Sander Felder FW 1102 C Sanding width: 1100 mm Sanding height: 3–170 mm 1st unit with rubber calibrating roller, hardness 85 2nd combination unit with rubber roller and sanding pad with stepless pressure adjustment for delicate sanding of veneered components 15 kW motor with automatic star/delta starter Ksdpfx Aaox A Dqisnefa Feed speed adjustable via frequency inverter Electric table adjustment Electronic table position display Workpiece thickness gauge Machine in very good condition, barely distinguishable from new

Condition: excellent (used), Year of construction: 2014, operating hours: 216 h, functionality: fully functional, machine/vehicle number: 25.12.004.14, - Very good edge banding machine for sale due to purchase of a new one. - New jointing cutters were installed only 2 months ago. - Low total operating meters! - The machine is still in operation and can be tested. - The edge finish is still very good. Features: - Jointing up to 2mm - End trimming unit - Multi-radius flush trimmer - R2 radius scraper - Surface scraper - Buffing unit Kfedpex A S N Hofx Aanja Price includes VAT. Sale excludes any warranty! If you have questions, please call 0175/5429734. Available from the end of January 2026.

Condition: used, Year of construction: 2013, total length: 4,800 mm, total height: 1,700 mm, total width: 900 mm, Weight: 1.250 kg Price: On request Edgebander Serial number: 200.04.007.13 400V 11kW 3PH 50HZ 28A multifunction trimming unit Glue unit Workpiece height 8-60mm - Year: 2013 - Documentation available: No - CE certificate present: No - Serial number: 200.04.007.13 - Transport dimensions: 4800mm x 900mm x 1700mm (l x w x h) - Transport weight [kg]: 1250kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Kfjdpfx Aaowlv D Nonsa Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: like new (used), Year of construction: 2021, For sale is an almost new Felder thickness planer D9-51 with a planing height of up to 254 mm. The machine is on display in our showroom and is therefore in like-new condition. Technical data: - Planing width: 510 mm - 4-knife cutterhead system - Thicknessing height: 3-254 mm Kjdpfxexxi Rto Aansfa - Thickness table length: 900 mm - Max. stock removal: 8 mm - Electrically adjustable thicknessing table with LED Power Drive display - Infinitely variable feed speed from 4-16 m/min - 7.5 HP (5.5 kW) motor - Star-delta starter - Exhibition machine, like new - Year of manufacture: 2021 The planer is located in A-5431 Kuchl and can be viewed at any time during our business hours. Subject to prior sale!

Condition: used, Year of construction: 2011, For sale: CNC machining centre profit H20 Format-4 Felder - year 2011. The machine is in continuous operation and can currently be inspected under power! 3-axis centre with preparation for a 4th axis. Working area 1250x3150mm, Z height=100mm, possibility to work on two separate working zones. In 2024, the electrospindle was refurbished. All repairs and maintenance carried out by a qualified service provider. Kfjdpfx Aasxg Ehdenja Loading is provided. Transport is the responsibility of the buyer – flatbed truck with a bed length of 7-8m required. Requirements to connect the machine: - Electric cable 5x4mm2 with a plug compatible with workshop sockets - Electrical protection (at least) 32A industrial, matched to motor power. General rule: rated current indicated on the machine (nameplate) +40% - Pneumatic connection, internal diameter at least 12mm - Compressor with capacity of at least 100l/min - Extraction/aspiration system VAT invoice provided. Price shown is net. For any questions please contact us by phone or email.

Condition: used, Year of construction: 2012, 1 edge sanding machine, manufacturer Felder, model FS 900, serial no. FS01.07.12, year of manufacture 2012, 4-roller feed unit type F 48, internal no. I440047 Kfjdoxzn Ayspfx Aanoa

Condition: excellent (used), Felder kappa 400 format sliding table saw, format 4 Sliding table 320 cm, Blade tilt and height electrically adjustable Rip fence on the right, manually adjustable up to 1250 mm, Scoring saw 1.1 kW, Ksdpox Arv Hofx Aansfa Main motor 7.3 kW, 3 cutting speeds Max blade diameter 400 mm Scoring blade 120 mm, bore 20 mm Used machine, in very good condition.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, pre-milling unit granulate glue station pneumatic pre-cut guillotine precision saws for trimming workpiece ends Kedpfx Aaoxw T Tijnefa milling unit with profile cutters corner milling unit profile scraper unit straight scraper unit machine length 4500 mm Year of manufacture 2013 Total feed – 87026 linear meters

Condition: good (used), Felder saw in nice condition. Has only had occasional use so in nice condition. Kfsdporubg Hefx Aanoa

Condition: excellent (used), Year of construction: 2024, For sale is a Felder AF-22 extraction unit with a maximum air volume flow of 3100 m³/h. The extraction unit is in very good condition and has been checked and serviced by our specialist staff. Technical specifications: - Extraction capacity: 3100 m³/h - Max. negative pressure: 2510 Pa - Extraction connection Ø 160 mm - Chip container volume: 2 x 200 liters - Incl. dust filter cartridge + shaker device - Year of manufacture: 2024 - Motor power: 3 kW The extraction unit is located in A-5431 Kuchl and can be viewed at any time during our opening hours. Subject to prior sale! Kfsdpfx Ajxxiy Usanea Related terms: extraction unit, dust extraction, filter, cartridge filter Reference: R-E28WO

Condition: used, AD Planer Hammer A3-31, good condition Price changes reserved, subject to errors, printing and typographical mistakes. Kfjdowzzhfepfx Aansa

Condition: excellent (used), Felder A951L Jointer Kfedpfsx Anvijx Aanea Max. planing width: 510 mm, Table length: 2700 mm Spiral cutterhead, Manual height adjustment of the infeed table with readout 5.5 kW motor, electric brake Machine in very good condition, still on the original knives since new.

Condition: excellent (used), Felder G360 Edge Bander, Pre-milling cutters, Kjdpoxy Iwbsfx Aanofa Glue application by roller, Pneumatic pre-cut guillotine, Pressure rollers, Finishing saws, Top and bottom milling unit R1 – R2, Profile scraper, Polishing unit Edge thickness: 0.4–3 mm, Max. panel height: 45 mm, Feed speed: 7 m/min, Total power requirement: 2.8 kW, Machine length with table: 290 cm, without: 240 cm.