Used Felder Kfs 37 for sale (149)

Condition: like new (used), functionality: fully functional, Exhibition machine For sale is our Felder RL-125 clean air extraction unit from our showroom, with a maximum air flow rate of 1900 m³/h. The extraction unit is in like-new condition and has been inspected and refurbished by our qualified personnel. Bjdpfx Abszrnqljtsll Technical data: - Clean air extraction unit RL-125 - Extraction connection 125 mm - Manual filter cleaning - Max. air flow rate 1,900 m³/h - Chip container with a capacity of 200 liters - 3 kW (4 hp) motor / 400 volts - H3 certified! The clean air unit is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: extraction, extraction unit, clean air unit, clean air, RL Reference: R-D1618

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, For sale is a Felder F 700 table router in high-quality industrial design, including a Felder F38 3-roller feed system. The machine impresses with its robust construction, powerful drive, and precise adjustment options, making it ideal for professional use in carpentry and joinery workshops. Technical data: Manufacturer: Felder Type: F 700 Year of manufacture: 2012 Motor power: 7.35 kW Voltage: 400 volts Frequency: 50 Hz 3-phase design Router spindle adjustable by 45° Electronic height adjustment with digital display (mm/inch) Speed levels: 3,500 / 6,500 / 8,000 / 10,000 rpm Made in Austria Equipment: Felder 3-roller feed system F 38 Bedozm Rzispfx Abtsll Swivel and height-adjustable feed system Sliding table Table extension Solid aluminum router fence Precise router fence adjustment Large cast iron table Digital display for router height Swivel indicator for the router spindle Emergency stop switch Professional industrial design The machine is in good used condition and shows only the usual signs of wear and tear due to age and use. It is ideally suited for daily professional use. An inspection and test run are possible at any time by appointment. Transportation is possible for an additional charge! The machine will be inspected before sale. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: excellent (used), Year of construction: 2022, machine/vehicle number: 31.07.109.22, functionality: fully functional, operating hours: 1,200 h, power: 3 kW (4.08 HP), input voltage: 230 V, input current: 20 A, input frequency: 50 Hz, type of input current: DC, volume flow: 1,450 m³/h, intake vacuum (max.): 2,400 mbar, suction capacity: 3,200 m³/h, intake manifold diameter: 160 mm, filter area: 20 m², noise level: 70 dB, actuation type: pneumatic, total height: 2,005 mm, total length: 1,775 mm, total width: 898 mm, overall weight: 370 kg, year of last overhaul: 2022, Equipment: CE marking, documentation/manual, PRICING & CURRENCY NOTICE FOR UK BUYERS: Headline price is €5,000 due to platform limits. Actual price is fixed at £4,250 GBP. UK Buyers: Fixed at £4,250 GBP via BACS bank transfer. No conversions. Overseas Buyers: Must clear into our UK bank as exactly £4,250 GBP net of all fees. 📌 COLLECTION LOCATION NOTICE: The machine is NOT at our registered account/billing address. Location: Private workshop just outside West Calder (rural area), West Lothian, Scotland. Access: Ample space and suitable access for vans, flatbeds, and collection couriers. Full Address: Provided directly to the buyer upon formal agreement of sale. Overview & Provenance: For sale due to a complete workshop closure. This premium Felder RL 160 clean-air dust extractor was purchased brand new directly from an official Felder dealership. One private owner from new. Meticulously maintained and looked after in a clean workshop environment. Clear Title & Ownership: Originally financed through Novuna over a 4-year term. All payments are fully complete as of August 2026. The machine is sold with 100% clear title, free from any financial encumbrances or liens. Official settlement confirmation can be shown upon request. Rare Single-Phase Configuration: Factory-built single-phase (230V) machine. Maximum operational current draw of 19.7A (requires a 25A backup fuse circuit, typically running on a 16-amp industrial socket). Ultimate plug-and-play setup for high-end home workshops or sites without 3-phase power. Premium Factory Upgrades & Accessories: • Pneumatic Filter Cleaning: Factory-fitted Jet-Pulse automatic compressed-air cleaning system. Blasts dust from inside filters to ensure maximum, constant suction and extend filter life. • Integrated Mobile Chassis: Factory heavy-duty caster wheel kit for effortless movement. • Dry-Air Protection Kit: Inline moisture filter and integrated pressure gauge. Ensures air supply is clean, dry, and regulated, fully protecting filters from moisture damage. • Pneumatic Pipework: Extra lengths of plastic compressed-air piping included alongside currently fitted pipework for immediate setup. Technical Specifications: • Certification: H3 Certified (Residual dust < 0.1 mg/m³ for clean indoor workspace air). • Max Airflow: 3,200 m³/h • Intake Vacuum / Negative Pressure: 2,400 Pa • Extraction Port: 160 mm • Filters: Original Felder filters, used but in perfectly fine, clean operational condition. • Noise Level: Exceptionally quiet 70 dB operational sound pressure level. Transaction & Returns Terms: • Price: £4,250 (No VAT to add / Private Sale). • Payment: Strictly via secure Direct Bank Wire Transfer (BACS / IBAN / SWIFT). No PayPal, cheques, or cash-on-delivery couriers. Bsdjzvh Dyepfx Abtsll • Shipping: Buyer must independently arrange, insure, and pay for all transport logistics. Machine released only once funds fully clear. • Returns: Private sale. Sold as described with no returns. Viewing and testing under power at the workshop is highly welcomed and encouraged.

Condition: like new (used), functionality: fully functional, For sale is a Felder CF7-41 S Professional 4-in-1 combination machine. Bedpfszqtflex Abtoll The machine is currently used in our showroom and is therefore in like-new condition with full warranty. Technical data: - Jointer/planer width 410 mm - 4-knife cutterblock (reversible knife system) - Swiveling planer fence 90-45° - Dual folding jointer tables - Electric planer table adjustment with LED display - 2 feed speeds 6 + 12 m/min - Circular saw and router swiveling 90-45° - Sliding table 2500 mm - Extension table with miter gauge 2600 mm - Graduated scale index for miter gauge - Router fence 230 mm with multi-adjustment system - 4 router speeds 3500/6000/8000/10000 rpm - 3-motor, 7.5 HP (5.5 kW), 400 Volt - Automatic star-delta starter The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! For information, see the telephone number on our website. Related terms: Combination machine, 4-in-1 combination machine, 5-in-1 combination machine, circular saw, planer, router Reference: R-D1618

Condition: good (used), Year of construction: 2010, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, actuation type: electric, table length: 205 mm, Equipment: CE marking, rotational speed infinitely variable, We are selling a professional and immediately ready-to-use workshop set from the Austrian premium manufacturer Felder. The set consists of the precise panel saw K 700 (year of manufacture 2010) and the matching mobile dust extraction unit AF 14. Both machines are in a well-maintained, fully functional condition and have operated flawlessly in a professional workshop environment until recently. Perfect for carpentry shops, interior design, or ambitious woodworkers who are looking for a complete solution. 1. Felder K 700 panel saw: Motor power: 5.5 kW (powerful S6-40% version) Voltage / Frequency: 400 V / 50 Hz (three-phase) Features: Smooth-running aluminum sliding table, large extension table with retractable guide rail and folding stop, solid parallel fence on round bar guide with fine adjustment, workpiece clamping device (eccentric clamp). 2. Felder AF 14 mobile dust extraction unit (included): Model: Felder AF 14 (movable on rollers) Power: Powerful motor with robust steel fan wheel Airflow: Max. 2,350 m³/h for excellent chip extraction Convenience: Practical quick-change system for chip bags Accessories: Includes flexible extraction hose (as shown) for direct connection to the panel saw. Bljdpfx Abozrl A Eotel The system is completely coordinated – connect it and start working dust-free immediately! The machines can be viewed on-site and tested while powered up after prior arrangement.

Condition: used, Year of construction: 2000, Second-hand machine Year of manufacture: 2000 Features and technical specifications: - Milling unit spindle height adjustable via handwheel 0–125 mm Blodpfx Abjzk Nx Ujtjl - Milling spindle swivel up to 45° via handwheel - Swivel angle display via digital readout - Tenon and slot table Z - anodised, table length 1000 mm - Milling stop 240 - Milling stop rails 450, aluminium, anodised - with 3-roller feed mechanism Availability: at short notice Location: 63934 Flörsheim

Condition: used, Year of construction: 2020, max. workpiece length 3740 mm profile spindle 1 Stück main drive 15 kW Control CNC Felder Format4 Type Profit H500S 16.38 CNC Machining Center to be sold on behalf of our customer ----- - From a wood window manufacturing company. - Machine still connected and ready for demonstration - Without machining tools Technical description (summary, full text see PDF): ----- Working dimensions: X = 3,740 mm Y = 1,570 mm Z = 350 mm clearance height (from console level), depending on clamping system, see layout. Travel: X = 4,930 mm Y = 1,925 mm Z = 500 mm Axis positioning speed: X = 80 m/min Y = 80 m/min Z1 = 30 m/min Z2 = 20 m/min - 5-axis milling spindle: 15 kW HSK F63 with liquid cooling, 1,000 - 24,000 rpm - Additional C-axis locking - Drilling head DH 18 6H1S: Vertical drilling unit with 12 spindles (7 spindles in the X direction, 5 spindles in the Y direction, grooving saw in the X direction) Horizontal drilling unit with 6 spindles, 4 spindles in the X direction and 2 spindles in the Y direction. 1 groove saw in the X direction, max. diameter 120 mm - Tool changer with 24 tool positions on the right side of the machine stand max. workpiece diameter 240 mm max. tool height 370 mm - Tool changer for circular saw blade mounted on the boom/tool changer max. saw blade diameter 350 mm - Tool changer on the left side of the machine stand with 10 tool positions. Max. workpiece diameter 180 mm Max. tool length 230/300 mm Collet spacing 110 mm - 24-position tool changer mounted on the boom, moving in the X-direction Max. workpiece diameter 240 mm Max. tool height 370 mm - Moving pick-up area for chip deflector plate - 6 workpiece supports with s-motion position control - 2 machining areas for pendulum machining - Vacuum pump 90 m³/h - Chip conveyor belt - Line laser for curved machining - Includes all existing solid wood clamps and vacuum suction cups - Automatic central lubrication - CE safety device - "WoodFLash" software Lamello Clamex P Macro Notching Macro software - "Greenline package" for reduced energy consumption Bsdpfsyq Sztox Abtell ----- Price of the above machine on Inquiry! ----- NOTE VIDEO: Not an original video. The video is from the machine manufacturer and shows a machine of this type. (Technical specifications according to the manufacturer - without guarantee!) All prices quoted are net, plus VAT.

Condition: good (used), Code: 0435 Brand: FELDER - AUSTRIA Model: G 560 - CE Standard Automatic edge bander with grinding units for applying wooden, abs, pvc, veneer edges to joinery, furniture, custom-made furnirture, panels, doors, kitchens and other items – CE Standard Technical data: Edge thickness 0,4–5 mm Min/max panel height 10/60 mm Workpiece feed speed 9 mt/min Bjdpfszkhlgox Abtell Configuration: Adjustable infeed guide Set of 2 diamond infeed grinding units for perfect panel grinding Tool diameter 60 mm Bore 25 Tool height 60 mm N° 4 cutting edges Rotation speed 12000 rpm Motor power 1,1 Kw each Gluing unit Pvc shears End cutting unit: Blade diameter 100 mm Bore 20 – Blade inclination 0-5°– Blade rotation speed 12000 rpm End trimming unit: Tool diameter 77 mm Bore 20 – Rotation speed 12000 rpm Edge scraper unit Glue scraper unit to remove any glue residue Touchscreen control panel Support table for large panels Soundproof protection cabin Suction inlets: 1 Ø 120 mm – 2 Ø 80 mm Compressed air 6–7 atm Overall dimensions mm 3200 x 900 x 1500 mm Weight kg 900

Condition: ready for operation (used), Year of construction: 2014, machine/vehicle number: 432.07.383.14, functionality: fully functional, planing width: 410 mm, number of blades: 4, overall weight: 510 kg, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Planing width: 410 mm Planer cutterhead: 4-knife Felder system cutterhead Number of planing knives: 4 Feed table length: 2,200 mm Fence: 1,300 x 170 mm MACHINE DETAILS Motor power: 5.5 kW Motor voltage: 400 V Chip removal: 5 mm Dust extraction connection: 120 mm Weight: 510 kg EQUIPMENT Cutterhead with 410 mm planing width Bsdozkt Itopfx Abtoll Infeed table with table length of 1,080 mm Fence with ruler 1,300 x 170 mm Fence guard, EURO standard 4-knife Felder system cutterhead

Condition: like new (used), Year of construction: 2025, functionality: fully functional, For sale is a used Felder F-900 Z milling machine with a tenon and groove table length of 1300 mm. The machine is used as an exhibit in our showroom and is therefore in like-new condition. Technical data: - 5 milling speeds - Milling spindle can be swiveled 90° - 45° - Milling fence for tools up to Ø 230 mm - Multi-adjustment system - Tenon and groove table 1300 mm - Electrically adjustable in height + swiveling "PowerDrive" Bledpfx Abjw Hfd Ijtol - Motor power 7.3 kW / 9.9 HP SD start - Year of manufacture 2025 The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: milling machine, milling Reference: R-D1618

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, operating hours: 65 h, travel distance X-axis: 3,720 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 225 mm, workpiece width (max.): 2,100 mm, workpiece height (max.): 85 mm, Equipment: CE marking, The machine is a former trade show model with only 65 operating hours! An inspection with the machine running is possible at the end of August, as the contact person will be on-site then. TECHNICAL DETAILS Travel range X-axis: 3,720 mm Travel range Y-axis: 2,500 mm Travel range Z-axis: 225 mm Blsdpfx Aszrfhbjbtsl Workpiece width max.: 2,100 mm Workpiece height max.: 85 mm Number of axes: 3 Tool magazine capacity: 15 Table length: 3,720 mm Table width: 2,100 mm MACHINE DETAILS Type of operation: electric Dimensions (L x W x H): 9,766 x 4,789 x 2,288 mm EQUIPMENT CE marking Documentation/Manual

Condition: like new (used), For sale is a like-new Felder FB-510 band saw with a cutting width of 480 mm. This demonstration machine is in its original condition, so you will receive the full warranty. Technical data: - Cutting width 480 mm - Cutting height 410 mm - Table size 640 x 500 mm - Table tilt -10° to +45° - Blade length 4318 mm - Motor power 2.9 kW / 4 hp, 400 V version The band saw is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! For information, call 06244-20299. Bsdpfx Ajznv I Rebtell Related terms: band saw, saws, saw, band Reference: R-A0117

Condition: good (used), Year of construction: 2023, For sale is a Felder RL-160 clean air extraction unit with a maximum airflow rate of 3200 m³/h. The extraction unit is in excellent condition and has been inspected and refurbished by our professional staff. (Fully functional) Technical data: - Max. airflow rate: 3200 m³/h - Filter area: 10 m² - Extraction connection diameter: 160 mm - Automatic filter cleaning - Antistatic filter - H3 dust tested - Year of manufacture: 2023 The clean air unit is located in A-5431 Kuchl and can be viewed at any time during our opening hours. Subject to prior sale! Related terms: clean air unit, extraction unit, dust extraction, clean air, RL Bsdjxnxm Nopfx Abtsll Reference: R-A0117

Condition: new, Year of construction: 2024, For sale is a new Felder panel saw K540S with a cutting height of up to 140 mm. The machine is an exhibition unit in our showroom and is therefore as new (full warranty). Technical data: - Cutting height: 140 mm - Saw blade diameter: 300–400 mm - Motor: 5.5 kW / 7.5 HP - X-Roll sliding table, cutting length: 2800 mm - Rip fence cutting width: 800 mm - Outrigger table: 1300 mm - Crosscut fence on outrigger: 2600 mm - 'Easy-Glide' tilt segment guide Blodpfxoy R N Apo Abtel - CE-compliant overhead guard - 3x 400 V / 50 Hz The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Related terms: panel saw, sliding table saw, circular saw, table saw, woodworking machine, Felder Reference: R-A0117

Condition: new, New Tempora F400 45.03LX Edgebanding Showroom Machine Full Options Large Display Bjdpfx Absziwxaetoll

Condition: used, Combined Machine FELDER BF6-26 -used- Tilting circular saw, Angle-mitre fence, Tilting spindle moulder, Spindle moulder with forward and reverse rotation, Self-adjusting cutterblock ----- Technical Data ----- Planing width: 260 mm, Number of knives: 2 pcs, Cutterblock diameter: 86 mm, Passage height: 220 mm, Planer table length: 1300 mm, Cutting width: 780 mm, Circular saw tilting range: 0-45°, Spindle moulder diameter: 30 mm, Blodpjxlt Shsfx Abtel Spindle moulder tilting range: 0-45°, Usable spindle moulder length: 120 mm, Max. cutter diameter: 220 mm, Max. retractable cutter diameter: 180 mm, Spindle speeds: 3500/6100/7800 rpm, Motors: 3 units, Extraction port for planer: 120 mm, Extraction port for saw: 120 mm, Extraction port for spindle moulder: 120 mm

Condition: used, FORMAT 4 Kappa V60 Panel Saw - used - Welded frame with extremely high rigidity, automatically retracting support slats, stable locking of the saw carriage at top and bottom, control panel at eye level, Bjdey Sazrspfx Abtsll digital readout on the longitudinal stop, digital display for horizontal cuts, strip cutting device, lift-roller transport system, edgable support surface, dust extraction unit TRK, dust-tested ----- Technical Data ----- Cutting length: 4,300 mm, Cutting height: 2,200 mm, Cutting depth: 60 mm, Saw blade Ø: 250 mm, Motor: 3 kW, Extraction port Ø: 2x 100 mm, Space requirement (LxWxH): 5,600 x 1,700 x 3,000 mm

Condition: used, Year of construction: 2010, Used machine Year of manufacture 2010 With joining unit and corner rounding unit Control panel with LCD display and keypad Joining unit with 2 counter-rotating diamond cutters With edge feeder for roll and strip material With glue roller and glue unit With pre-trimming from the roll With pressure unit With trimming unit with pulling trimming cut With flush and radius trimming unit Corner rounding unit for front edges Manual unit adjustment Edge thickness 0.4-5 mm Workpiece height 8-60 mm Min. workpiece width 70 mm Bsdpfx Absw I H Rketsll Min. workpiece length 140 mm Feed speed 11 m/min With radius scraper unit With flat scraper With polishing unit Extendable workpiece support Extraction connection 120 + 2 x 80 mm Weight approx. 990 kg L x W x H 4550 x 1550 x 1100 mm Availability: Short-term Storage location: Flörsheim

Condition: excellent (used), Year of construction: 2016, For sale is a used Felder planing machine, model AD5-31, with a planing and thicknessing width of 310 mm. The machine is in very good condition and has been refurbished and inspected by our qualified technicians. (fully functional) Bljdpfxezltkwo Abtsl Technical data: - Planing and thicknessing width 310 mm - Silent Power planing cutterhead - Adjustable planing fence, swiveling 90 - 45° - Thicknessing height 4 - 225 mm - Thickness adjustment with handwheel - 5.5 HP (4 kW) motor The planing machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Planing machine, thicknesser, thickness, Felder Reference: R-N1194

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Year of manufacture: 2022 11 kW motor 350 mm pipe connection Filter area: 71 m² Dimensions: 270 x 120 x 230 cm Weight: 850 kg Chip capacity: 2 x 250 liters Nominal flow rate: 6920 ccm/h Mobile Pneumatic filter cleaning Dry extinguishing system Bledpfx Aezcgbxjbtsl

Condition: excellent (used), functionality: fully functional, !!!DEMO MACHINE!!! For sale is a used Felder combination machine CF5-31 with a maximum thickness of up to 230 mm. The machine is in very good condition and has been refurbished and inspected by our qualified personnel. (fully functional) Technical data: - Planing and thicknessing width 310 mm - 4-knife cutterblock (reversible knives) - Thickness capacity 4-230 mm - Folding planing table - Adjustable planing fence 90-45° - Tilting circular saw and router 90-45° - Sliding table 1300 mm - Miter fence 1300 mm - 4 router speeds 3000/6000/8000/10000 rpm - Router fence 230 mm - 3 motors, each 5.5 hp (4 kW), 400 volts - Machine No. 440.10.242.17 Bledpfx Abozliiietjl The combination machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Planer, thicknesser, thickness, Felder, router, routing machine, circular saw, saw Reference: R-D1618

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total width: 1,962 mm, total height: 1,992 mm, total length: 1,450 mm, working width: 1,100 mm, grinding width: 1,100 mm, overall weight: 1,150 kg, grinding height: 170 mm, power: 15 kW (20.39 HP), height adjustment type: electric, grinding belt length: 1,900 mm, grinding belt width: 1,120 mm, table length: 1,962 mm, table width: 1,100 mm, power of feed motor: 750 W, air demand: 3,620 m³/h, input voltage: 400 V, operating pressure: 8 bar, > Digital grit adjustment and sanding pad control directly on the control panel > Sanding width 1100 mm Bljdpfx Abjzm Nifstsl > Contact roller and sanding pad unit > Scotch-Brite brushes at the machine outlet > Two-sided roller table extension, 200 mm > Clearance height can be adjusted to an accuracy of 0.1 mm on the control panel > Stepless feed rate, 0.1-10 m/min

Condition: as good as new (ex-display), functionality: fully functional, overall weight: 850 kg, power: 5.52 kW (7.51 HP), input voltage: 400 V, input frequency: 50 Hz, grinding width: 650 mm, Further technical data Grinding height: 3 mm - 200 mm (250 mm) Grinding width: 650 mm Dust extraction connection: 2 x 120 mm Feed rate: continuously variable 2.5-10 m/min Standard equipment Maintenance interval display Plain text error messages Constant infeed height – fixed table, 900 mm Electric height adjustment including fine adjustment from the control panel Feed rate continuously variable from 2.5-10 m/min, adjustable via inverter from the control panel Endless belt conveyor Automatic feed belt centering 1st brush unit with selectable steel brush, counter-rotating operation, mechanically pre-tensioned rubber pressure rollers, 1 motor with 4 kW and cutting speed of 1000 rpm Bjdpfjw Axi Aex Abtjll 2nd brush unit with Tynex brush K60 D=200mm, counter-rotating operation, mechanically pre-tensioned rubber pressure rollers, 1 motor with 4 kW and cutting speed of 1000 rpm Dimensions: 1455 x 1070 x 1250 mm Required air pressure: 6 bar Optional equipment 022 7.5 hp (5.5 kW) motor power for 1st unit 024 7.5 hp (5.5 kW) motor power for 2nd unit 027 Oscillation control for 1st and 2nd brush unit

Condition: used, Year of construction: 2007, power: 3 kW (4.08 HP), intake manifold diameter: 160 mm, filter area: 10 m², total height: 1,800 mm, total length: 1,700 mm, total width: 800 mm, overall weight: 200 kg, Equipment: CE marking, No. 04529 Mobile extraction unit / mobile dust extractor Felder RL 160 Used, year of construction 2007, good condition, machine comes from a small business Nominal air flow approx. 1750 m3/h Minimum air flow 1448 m3/h Maximum air flow 3250 m3/h Negative pressure at suction pipe 1720 Pa Nominal negative pressure 1120 Pa Extraction connection diameter 160 mm Motor 3 kW Residual dust content class H3, 0.1 mg/m3 Filter surface 10 m2 Design type B1, suitable for extracting combustible dusts of dust explosion classes St 1 and St 2 Manual filter regeneration 2 chip collection containers, each 200 l GS-tested CE-compliant Transport dimensions approx. 1700 x 800 x 1800 mm LWH Weight approx. 200 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Blodpfx Abezcqxuetol Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: ready for operation (used), Year of construction: 2018, machine/vehicle number: 441.12.292.18, functionality: fully functional, cutting height (max.): 137 mm, saw blade diameter: 400 mm, spindle speed (max.): 4,000 rpm, table width: 1,300 mm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. cutting height: 137 mm Max. saw blade diameter: 400 mm Saw blade arbor diameter: 30 mm Parallel fence travel: 1,300 mm Blsdpfx Abszdz N Eotol Roller table length: 3,200 mm Table width: 1,300 mm Saw unit tilt: 0 - 45° Spindle speed, pre-cutter: 8,200 rpm Pre-cutter saw blade diameter: 120 mm Max. spindle speed: 4,000 rpm MACHINE DETAILS Main motor power: 5.5 kW Voltage: 400 V Current consumption: 11 A Fuse: 16 A Power: 5.5 kW Dust extraction nozzle diameter: 120 mm Dimensions & Weight Dimensions (L x W x H): 3,250 x 1,000 x 1,100 mm Shipping weight: 650 kg Shipping packages: 1 EQUIPMENT Scoring saw CE marking Controlled axes: Parallel fence, cutting height, swivel, scoring saw height Manually adjustable axes: Parallel fence, cutting height, swivel, scoring saw height