Used Film Laminating Machine for sale (65,275)

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: K500-50739, total length: 14,000 mm, total height: 2,500 mm, total width: 3,600 mm, type of input current: three-phase, product height (max.): 100 mm, product height (min.): 30 mm, product length (min.): 500 mm, product length (max.): 1,800 mm, product width (max.): 1,500 mm, product width (min.): 600 mm, input voltage: 400 V, compressed air connection: 6 bar, input current: 33 A, working height: 900 mm, passage height: 250 mm, table width: 1,700 mm, table length: 2,000 mm, year of last overhaul: 2022, workpiece weight (max.): 100 kg, Equipment: documentation/manual, Dimensions of the entire machine: Width: 3,600 mm Length: 10,600 mm (without feed and deposit areas) Height: = 2,500 mm Working height: 900 + 50 mm Feed rate: 13 - 23 m/min (frequency-controlled) Properties of the PE shrink flat film • Shrink film suitable for the shrink sealing process. (Top and bottom films must be laterally sealable in the tunnel). • Biaxial shrinkage value of approximately 50-60% lengthwise, approximately 40-50% crosswise • Antistatic treatment. • Shrink film with needle perforation. Improves the shrinking process and has higher gas and water vapor permeability. Shrink film to be used Todpfsvvlyiex Aiqsa • Biaxially shrinking, needle perforated. • Spooled on rolls, sound-tight and with straight edges. Foil thickness: Application: approx. 40 - 60 μm. Film widths: Application: 800 mm, 1100 mm, 2000 mm Roll outer diameter: max. 350 mm Core outer diameter: min. 90 mm Bottom film calculation: Package width + 200-250 mm Top film calculation: Package width + (2 x height) + 200-250 mm Technical component data: Conveyor belts: Infeed conveyor (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. Roller conveyor behind the tunnel (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. KFE standard film wrapping machine: Max. film roll width, top and bottom: 2,100 mm / Package height (passage height): max. 250 mm / max. Film roll diameter: 350 mm Film thickness: approx. 40-60 µm high-quality PE film / Weight: approx. 3,100 kg Side sealing: Sealing bar length: 1,850 mm / Adjustment range: 500 - 1,600 mm / Adjustable feed rate: 13 - 23 m/min. Shrink tunnel ST / lI -1800 -3000 -300: Clear hood opening: 1,860 mm wide / 300 mm high / Hood length: 3,000 mm / Transport length: 3,560 mm Adjustable feed rate: 6 - 23 m/min. The machine can be inspected at the production site.

Condition: good (used), - Unused Tjdpfsrhib Iox Aiqsa - Maximum working width 700 mm - 2 rollers 1 x top 1 x bottom - Simultaneous wrapping of top and bottom side for many materials, glass, mirror splinter protection film, - metal, other smooth sheets - Roller conveyors available for supply and removal - Price on request

Condition: new, Year of construction: 2023, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 52DLT030, compressed air connection: 6 bar, working width: 560 mm, warranty duration: 12 months, operating speed: 650 mm/s, Komfi Laminator Delta 52 (Feeding Head) New, Manufactured 2023 Output / laminating speed 3-40 m/min *) (regard. technological conditions) Maximum output 8000 sheets /hr Average monthly capacity of machine: non-stop production environment Paper specifications Max. sheet size 560 x 800 mm Min. sheet size 200 x 200 mm Basic weight 115 x 600 g/ m2 Thickness of sheets max. 0.7 mm; Overlap > 0 Thickness of sheets max. 1.4 mm; Overlap < 0 Foil specifications Material polypropylen, polyester, nylon Thickness 24-50 μm Inner diameter of tube 3“ = 76.2 mm Outer diameter of roll 350 mm Single lamination - Delta Feeding with loading head Sectional two-zone heating Pressure roller PUR B Film unreeling - airshaft - Amiga 52, Delta 52 Pneumatic straightening Without knife Without cutting knives Separation pneumatic Power EU 3x 400V Frame and covers - ASxxP Compressor 25 Unwinding unit - Amiga 52, Delta 52 Todpfjzb Eawox Aiqja One-system feeding head 43 mm lift Drive chain - ASxxx Air blow gun

Condition: new, Year of construction: 2020, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 52AMG162, compressed air connection: 6 bar, working width: 560 mm, warranty duration: 12 months, operating speed: 400 mm/s, Komfi Laminator Amiga 52I (Intelligent In-Line Feeding) New, Manufactured 2020 Specifications: Max. speed of lamination: 25 m/min Max. output: 8000 sheets/h Min. sheet dimensions: 200 × 250 mm Max. sheet dimensions: 560 × 800 mm (or up to 1016 mm) Paper weight: 115-600 g/m² Paper thickness: Max 0.7 mm (with overlap > 0) / Max 1.4 mm (with overlap < 0) Max. paper pile: 6 cm (depending on sheet length) Thickness of laminating film: 24-50 μm; OPP, PET, Nylon Sheet overlap accuracy: ± 1 mm Feeder: Intelligent In-Line Feeding (connection with the PRinter) Laminating Unit: Adjustable distance stoppers for lamination unit to enable processing thick substrates and windows lamination. ”On-the-fly” side-adjustable unwinding shaft with adjustable brake force. Height-adjustable and removable spread roller perfectly removes wrinkles from laminate. IR heating for laminating cylinder. Temperature sensor inside the cylinder for precise regulation. Rubber coated pressure roller. The powerful pneumatic pressure system guarantees even nip pressure and perfect lamination results. Separator & Delivery: Decurling unit consisting of bar and roller with position control to move the snapping moment automatically when the position of decurler is changed. Todpfezb Db Hex Aiqoa Built-in film perforator to enable sheet separation. Cam-driven separation roller with adjustable tearing action, delivery roller and sheet skewing wheel. Fixed delivery desk with adjustable air nozzles.

Condition: used, WIDMANN automatic film unwinder, film unwinder Rewinder and unwinder, unwinder, rewinder, winding machine, roll winding machine, roll unwinding machine Unwinder with deflection rollers and film guide system Unwinder with deflection rollers for constant strap tension Year of construction approx. 2000 Roll width - coil width max. 400 mm Material width max. 400 mm Deflection rollers Ø 80 mm Deflection roller width 430 mm Roll weight - coil weight max. 150 kg Todpfxeud U Sfe Aiqea Expansion shaft for cardboard core with inner diameter Ø 76 mm (inner coil diameter) Roll outer diameter - coil outer diameter max. 600 mm Interference circle with rotation of the film reel max. Ø 800 mm Reel shaft speed approx. 70 rpm Motor power - drive of the film reel 0.37 kW Mains connection 400 Volt, 50 Hz - Constant belt tension, winding tension via film accumulator with deflection rollers and vacuum shaft - Pick-up shaft with chuck for large rolls with cardboard core inner Ø 76 mm - 8 deflection rollers for film accumulator with constant winding tension, bearing via precise linear guide - Gear motor LENZE with brake to drive the film roll (0.37 kW) - Electrical system not ready for operation, see pictures Space requirement L x W x H approx. 1000 x 1000 x 1900 mm net weight 360 kg good condition

Condition: used, WIDMANN automatic film unwinder, film unwinder Rewinder and unwinder, unwinder, rewinder, winding machine, roll winding machine, roll unwinding machine Unwinder with deflection rollers and film guide system Unwinder with deflection rollers for constant strap tension Year of construction approx. 2000 Roll width - coil width max. 400 mm Material width max. 400 mm Deflection rollers Ø 80 mm Deflection roller width 430 mm Roll weight - coil weight max. 150 kg Expansion shaft for cardboard core with inner diameter Ø 76 mm (inner coil diameter) Roll outer diameter - coil outer diameter max. 600 mm Interference circle with rotation of the film reel max. Ø 800 mm Reel shaft speed approx. 70 rpm Motor power - drive of the film roll 0.37 kW Motor power - drive of the flat film into the vacuum shaft 0.25 kW Mains connection 400 Volt, 50 Hz - Constant belt tension, winding tension via film accumulator with deflection rollers and vacuum shaft - Pick-up shaft with chuck for large rolls with cardboard core inner Ø 76 mm - 8 deflection rollers for film accumulator with constant winding tension, bearing via precise linear guide - LENZE geared motor with brake to drive the film roll (0.37 kW) - LENZE geared motor with brake to drive the flat film into the vacuum shaft (0.25 kW) Space requirement L x W x H 1900 x 1300 x 1900 mm net weight 580 kg Todpfxsu H R Iqo Aiqea Good condition

Condition: ready for operation (used), functionality: fully functional, We offer this ready-to-use IML Machinery DA-900 IML DA 900 box laminating machine. Manufacturer: IML Machinery Model: DA-900 Condition: ready for use Category ID: 174 Type ID: 82 Machine type: IML DA 900, box laminating machine DESCRIPTION Thanks to its ease of operation and quick changeover capability, this electro-pneumatic machine is suitable for small and medium production volumes of high-quality boxes. The operator places the box onto the pre-glued facing paper and then manually feeds it into the machine. Once the box is positioned, the processing sequence is started via the machine's foot pedal. The machine then operates independently, lining the box, including the inner flap. At the end of the cycle, the box is automatically ejected. TECHNICAL DATA Production: approx. 7 pieces/minute Todpfszfv Tzjx Aiqea Voltage: 220 volts, single-phase Total power: 2.5 kW Compressed air connection: Rilsan hose Ø 12 mm Air consumption: 20 NL/minute at 6 bar DA 900 Box dimensions (L × W × H): min. 60 × 60 × 10 mm; max. 430 × 350 × 120 mm Machine dimensions (W × D × H): 1200 × 1400 × 2300 mm Weight: 1000 kg If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2024, feed rate X-axis: 5 m/min, The machine has already been dismantled and stored. TECHNICAL DETAILS Adjustable speed: up to 5 m/min Roller pressure: pneumatic Adjustable temperature EQUIPMENT Manual system Swiveling, patented control panel Monochrome display Automatic sheet separation Anti-curl technology Compact design Faster Foiling KIT Ultra-quiet compressor Console on wheels IVIVID Matrix Omni-Flow Feeder 380 High-stack feeder LC display Adjustable front air flow Tsdpfxozb Ip Ij Aiqea Central suction belt Note: Accessories are without guarantee. The principle applies: “Item purchased as seen.” The prospective buyer must verify the completeness of the item on site.

Condition: new, Year of construction: 2020, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 52AMG290, compressed air connection: 6 bar, working width: 560 mm, warranty duration: 6 months, operating speed: 400 mm/s, Komfi Laminator Amiga 52B (Bottom Suction Feeder) New, Manufactured 2020 Specifications: Max. speed of lamination: 25 m/min Max. output: 8000 sheets/h Min. sheet dimensions: 200 × 250 mm Tsdezbaxuopfx Aiqea Max. sheet dimensions: 560 × 800 mm (or up to 1016 mm) Paper weight: 115-600 g/m² Paper thickness: Max 0.7 mm (with overlap > 0) / Max 1.4 mm (with overlap < 0) Max. paper pile: 6 cm (depending on sheet length) Thickness of laminating film: 24-50 μm; OPP, PET, Nylon Sheet overlap accuracy: ± 1 mm Feeder: Bottom Suction Vacuum Feeder Laminating Unit: Adjustable distance stoppers for lamination unit to enable processing thick substrates and windows lamination. ”On-the-fly” side-adjustable unwinding shaft with adjustable brake force. Height-adjustable and removable spread roller perfectly removes wrinkles from laminate. IR heating for laminating cylinder. Temperature sensor inside the cylinder for precise regulation. Rubber coated pressure roller. The powerful pneumatic pressure system guarantees even nip pressure and perfect lamination results. Separator & Delivery: Decurling unit consisting of bar and roller with position control to move the snapping moment automatically when the position of decurler is changed. Built-in film perforator to enable sheet separation. Cam-driven separation roller with adjustable tearing action, delivery roller and sheet skewing wheel. Fixed delivery desk with adjustable air nozzles.

Condition: excellent (used), functionality: fully functional, CellCoat RUBY 52 Print Laminator Manual belt feeder, Single-sided heavy-duty print laminator, Perforator and foil cutter, anti-curl device, automatic desheeter, output table, Laminating temperature 60–120 degrees, Roller pressure 400 tons, Todpfx Aiozg Eatjqja Paper weight 125–500 g/m², Production speed 0–20 m/min, Maximum paper size: 52 x 72 cm

Condition: excellent (used), Year of construction: 2011, Year: 2011 Maximum sheet size: 530 × 740 mm Laminating speed: up to 25 m/min Automatic suction feeder Pneumatic roller pressure Automatic film cutting Tjdpfxextxd Se Aiqoa Compatible with gloss, matt, and soft touch films Short changeover time – ideal for short runs

Condition: excellent (used), Year of construction: 2010, Year: 2010 Maximum sheet size: 500 x 720 mm Tjdpfsqfga Sex Aiqsa Minimum sheet size: 200 x 250 mm Paper weight: 130 g/m² to 350 g/m² Speed: 20 m/min Pneumatic pressure Touch screen Display

Condition: good (used), Year of construction: 2009, Cutting width: 3700 mm. Tjdpfx Aisxpnk Heqea With glass loading and unloading device. Cutting system: heating and blade. Working height: 950 mm. Total length of the system: 4080 mm. Table width: 4020 mm. Width across the bridge: 4820 mm. Year of manufacture: 2009 Weight: approx. 6.2 t. Condition: good, second-hand

Condition: ready for operation (used), D&K System Jr. Year 2006 Format max 68x76 cm Format min 20x28cm Todowhcfxopfx Aiqea Till 500 gsm can work Single Sided Thermal Film Laminator Accufeed Jr. Automatic Sheet Feeder, Acculam Jr. Laminator, Accu-III Jr. Automatic Sheet Separator, Jogger Catch Tray Delivery

Condition: ready for operation (used), A 3-side sealing packaging machine Beck is available. Processing materials: recyclable mono films/recycled material/bio film, product width range: 20mm-400mm, max. product height: 200mm, max. packaging capacity: 60cycles/min. Including beck heat shrink tunnel. Documentation available. An on-site inspection is possible by appointment. Tjdpfx Aiexn Aamjqea

Condition: ready for operation (used), Year of construction: 1998, Working width: 650-1305mm, exception PET/ALU/PE and ALU/PE: max. 1100mm, production speed: 120-220m/min, max. operating speed: 300m/min, max. primary unwinding roll diameter: 1000mm, core inner diameter cardboard core: 76/152mm, steel core: 150mm, adhesive application 2K for film/film: approx. 1.5-2.5g/m², 1K for paper/film: approx. 2.5-4g/m², max. secondary unwinding roll diameter: 1000mm, core inner diameter cardboard core: 76/152mm, steel core: 150mm, max. rewinding roll diameter: 1200mm, core inner diameter cardboard core: 152mm, steel core: 150mm, processable materials, min. polyester film: 10µm, min. aluminum foil: 6.6µm, min. PE film primary unwinder: 40µm, min. PE film secondary unwinder: 30µm, max. paper: 150g/m², length: 8625mm, complete documentation vorhanden. An on-site inspection is possible. Tedpfxjy Uydfo Aiqsa

Condition: used, Year of construction: 2010, functionality: fully functional, The machine has been returned and is now functioning properly after a new machine was purchased. Tedpezbipiefx Aiqja

Condition: used, Year of construction: 1998, functionality: fully functional, Laminating machine LAMINA 1114 FA. Manufactured in SWEDEN; year: 1998 Max format: 1400×1100 mm Min format: 200×350 mm Top sheet: 130–450 g/m2 Bottom sheet: from 250 g/m2 Material thickness: 0.6–10 mm Feeder height: 500 mm (bottom), 300 mm (top) Production depending on material: up to 1,500 sheets/hour Tedey Ryhvjpfx Aiqja The machine has been dismantled. At the time of disassembly, it was operational.

Condition: ready for operation (used), Year of construction: 2004, ➢ Speed 10-80 m/min. ➢ Minimum Sheet Size: 22 x 30 cm ➢ Maximum Sheet Size: 72 x 102 cm Tedpfjyzcikex Aiqoa ➢ Sheet Production: >10.000/h ➢ Sheet Weight SF: 100-600 g/m2 ➢ Adhevise Application SF: 1.5 – 4.0 g/m2 ➢ Working Width 72 cm ➢ Film Thickness 10-50 µM ➢ Film Roll Diameter 350 mm ➢ Energy Consumption 24/66 kW ➢ It is Very Good Condition ➢ Available Immediately.

Year of construction: 2012, condition: as good as new (ex-display), functionality: fully functional, We now offer a Linea Pack Avvolgipack 40 CA, a high-quality machine for horizontal wrapping of products. This particular unit is from 2012 but has only been used as a demonstration model. As such, it is in absolutely mint condition and has never been operational in production. Elongated products: It is ideal for items such as pipes, mouldings, metal profiles, boards, or rolls. Tedpfsy N Uqvjx Aiqja Bundling: When several smaller units need to be combined into a package, for example multiple pipes, carpets, or timber. Protection against external influences: Just like conventional pallet wrapping, it provides effective protection against moisture, dirt, and transport damage. The machine is available for immediate delivery. Shipping costs are additional. Model: Avvolgipack 40 CA Year of manufacture: 2012 Machine height: 1,390 mm Machine width: 924 mm Machine depth: 2,674 mm Capacity: 3-25 m/min (throughput) Power supply: 220V, 0.37 kW Max product height: 190-250 mm (depending on product width) Machine weight: approx. 400 kg

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Barberan laminating machine for door frames Todpjy Aibcefx Aiqea

Condition: repair required (used), Year of construction: 2005, functionality: not functional, Automatic stretch wrap machine for loads placed on pallets. Machine requires repair! Missing one stretch film carriage, ASI communication not functioning, and control cabinet incomplete. Original machine documentation and electrical schematics included. Manufacturer: M.J. MAILLIS GROUP (SIAT) Todpfxexfbfvs Aiqja Model: MANCON 1710 Year of manufacture: 2005

Year of construction: 2009, condition: good (used), - Fully automatic - Package height max. (mm): 650 - Package height min. (mm) :15 Tedpspu Anmjfx Aiqea - Package width max. (mm): 1250 - Package length min. (mm): 300 - infeed conveyor (mm): approx. 2.000 x 1.300 x 900 - Outfeed conveyor (mm): approx. 2.000 x 1.300 x 900 - Outfeed table - Overall dimensions (mm): approx. 8,000 x 3,000 x 2,200 - Total connected load (kW): approx. 5

Condition: reconditioned (used), functionality: fully functional, The Lamina FA Blackline 1620BL is a highly accurate, high speed sheet-to-sheet fully automatic laminating/mounting machine. The machine can handle most of the existing materials in the market. The modular construction allows easy upgrading and maintainance resulting in a machine that lasts for many years. Max. sheet size: width: 1600 mm length: 2000 mm Min. sheet size: width: 350 mm length: 350 mm Feeder Capacity: Top feeder: 500 mm (20”) Bottom feeder: 800 mm (32”) Top Sheet: 130 to 450 g/m2 1 pts = 28,25 g/m2 Bottom Sheet: From 250 g/m2 to 10 mm (0,39”) 1 pts = 28,25 g/m2 corrugated from 0,6 - 10 mm (0,016” - 0,39”) Air Requirements: Tjdpow Hrrrsfx Aiqja 6 bar; 80 psi; 34 CFM, Approximately 500 L/min Can be additionally equipped with Optional Laminating Machine PB 1600 Pressure Belt

Condition: excellent (used), type of input current: AC, input voltage: 230 V, Equipment: compressor, MATRIX MX 530 DP, double-sided thermal laminator, with foiling attachment. Complete with continuous feeder, touch screen controls, miss feed detector, air operated laminating pressure, auto sheet separation drop sheet delivery. Todpfxor Ddu Io Aiqja It is a pneumatic model with a built-in compressor for high-quality lamination of digital print. Complete with the gilding attachment and second feed roller for double-side laminating. This machine is in good condition, just serviced and ready for work. We can arrange export packing and transportation. (quotation on request) Our price includes packing on a pallet and loading onto your transport. Payment in GBP in full before loading. Preferred payment method, bank transfer. Please do not hesitate to ask if you need further information. Specifications: Max sheet size 510 x 640mm Min sheet size 200 x 300mm, Max speed 10m/min Film unwind shaft 75mm dia Temperature range 80-140 deg C Electrically heated laminating roller Electrical supply 220-240V, 50 Hz, 1 ph, 10A Machine weight 260kgs Machine size 1868L v 910W x1 285mmH