Used Film Packer for sale (1,593)

Condition: used, Year of construction: 2005, Material type: LDPE, LLDPE, mLLDPE, HDPE, PP, regranulate Machine dimensions (LxWxH): 16 X 5 X 10.5 m Min/Max final Film width: 900 / 1700 mm Film thickness: 27–200 µm Capacity: Up to 240 kg/h Line speed: 0–150 m/min Screw diameter: 55/65/55 Layer ratio: Up to 25/50/25 % L/D ratio: 30/1 Number of heating zones: 3 for 55 mm and 4 for 65 mm (1 zone per screen) Dosing system: Doteco Grado; 3 units with 4 components each; centralized vacuum pump (added later); all scales fully serviced last year; new software and external touch screen; neck (before extruder) with additional magnets Electronics: Siemens, ABB Software: Macchi’s; full control via touch screen (replaced 3–4 years ago) Die head with IBC: 280 mm; 2.4 mm gap (3 heating zones); TE502 model with air ring extension Internal cooling balloon diameter control (IBC) Ultrasonic sensor (1 unit); JET internal cooling system Air ring: Karat, with 3 air inlets, 45 segments (valves), with integrated thickness control Air ring blower: YES Thermoregulation chiller: YES (Eurochiller) Bubble cage: YES; rollers with silicone cover; motorized electronic control; secondary cage with motorized open/close and adjustment Thickness control: K design (Karat, Kundig K-150); contact system integrated with air ring Collapsing frame: Free aluminum rollers Rotation: Nip roller 1800 mm (max film width 1700 mm); motorized open/close; speed control motor; other free rollers in aluminum; 2 ceramic air rollers for cooling Water-cooled rollers after nip roller: / Film centering: 2 ultrasonic sensors (Five) Gbedpfew Nhavjx Aabsu Corona treatment (double-sided): YES (F&B); above winders; 8 kW generator; ozone extractor and film detector; 10 mm electrode width Winders: Back-to-bac Winder model: Model BO; nip roller 1800 mm (max film width 1700 mm); manual shaft placement; max roll diameter 1000 mm; trim and multiple output rolls; film tension and winding control; 2 banana rollers; ‘flying knife’ (new Origa knife installed a few years ago); electric panel included Shafts: 4 x 76 mm and 4 x 152 mm Trim suction: YES; includes Supergrillo regranulation system Frame construction: YES Installed power: Approx. 150–200 kW (400 V, 3-phase

Condition: used, Multivac C500 twin chamber vacuum packer Recently taken out production, capable of processing with MAP With a large 250 m3/h Busch vacuum pump Specifications Gedpfxew Tyw Ij Aabjbu Model; Multivac C500 Power Supply; 400 V / 50 Hz / 3-phase Motor Power; ~5.5 kW Vacuum Pump; Busch RA 0 160D ~160 m³/h Seal Bar Length; 660 mm × 4 Chamber Dimensions; 740 × 660 mm (two chambers) Machine Dimensions; ~1600 × 950 × 1060 mm Weight; ~650 kg Construction; Stainless steel Control System; MC06 microprocessor with precise vacuum measurement Key Features; Automatic progressive ventilation; one chamber can be filled while the other evacuates; user-friendly, hygienic, easy to maintain

Condition: used, Year of construction: 2006, Overview This machine was built in 2006 by Italian manufacturer Gamapck. The machine is in good production condition, already dismantled and stored in a warehouse. Techn. Details Capacity: Up to 45 packs / minute on single lane Last production was 16,000 bph (six packs) Bottles formats: PET bottles with shrinkable PE film 12 x 0,33L 6 x 0,50L 6 x 0,33L 24 x 0,50L Machine drive: Siemens S7 Machine equipped with Infeed conveyor & CE control panel Supplied with spare parts Gbodpfx Asw En Uasabsu

Year of construction: 2019, condition: ready for operation (used), Length: 5650mm, width: 2960mm, height: 1850mm, with documentation, without lifting device and roller conveyer, an inspection is possible. Gbjdpfx Aajp R R H Ijbeu

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: C2401317M, warranty duration: 12 months, For sale: automatic industrial pallet stretch wrapper. The machine is brand new, unused, and has never been unpacked from its original packaging. Available immediately, as it comes from a cancelled project. This is an excellent opportunity for companies looking for an efficient and reliable automation solution. Technical specifications of the wrapper are provided in the attached PDF. Main images are for reference only. The unit is sold packaged on the manufacturer’s pallet. Installation support can be offered. Gedpfx Aaew Nn Tcsbsbu

Year of construction: 2023, operating hours: 300 h, condition: excellent (used), functionality: fully functional, Extruder is supplied by Reifenhauser, mechanical/automation is supplied by JWELL. All working in harmony and fully functional. The line is only used for trial production and almost brand new equipment. Quality test labrotory equipment iss also available upon request. Diameter: 150 mm L/D: 25 Extrusion height: 1.150 mm Extruder design: u-arrangement motor right side Installation: movable design Rails: including Drive cooling. air cooling with external fan Main drive nominated power: 80,00 KW Screw speed n1: 30,00 1/mln Number of heating-cooling zone: 4 Feeding zone tempering heating / cooling shell Heating capacity feeding zone: 14,40 KW Shield cooling yes Total heating capacity barret: 44,00 KW Heating capacity flange: 3,50 KW Barrel wear protection: R121 Barrel grooves. yes Gsdpfxov Erwyj Aabjbu Machine colour RAL 7016 Contrast colour. RAL 9005 Screw removal: removal to the front Screw cooling: prepared - Type; Slot Die with coat hanger manifold and upper flex lip. - Polymer: EVA - Output: 300 - 400 kg/h - .Slot Width: 1350 mm - Up Opening: 0.05mm - 1.2 mm - Up Adjustment: Up adjustment of the upper flex lip with push only bolts on 25mm center lines. - Manifold: Computer calculated coat hanger manifold for optimum polymer melt distribution. - Insulation: Die body insulation on upper and lower die body - Control Zones: 12 Zones (6+ 6 in upper/lower die body ♦ 2 sideplates) - Die body: Complete die manufactured from highest quality tool steel. DIN 1.2311 treated to 1000 N/mm - Coating: Hard chrome plated 25 - 35 pm Surface roughness flow channel Ra 0,08 - 0,1pm Surface roughness lip land Ra 0,03 - 0,05pm - Die Inlet: Middle back round - Bectric: Completely wired to customers demand (230 V) on multi pin plugs.Thermocouples installed and wired into multi-pin plug

Condition: like new (used), Year of construction: 2022, operating hours: 1,800 h, functionality: fully functional, machine/vehicle number: 83-CLM-317, SC GAMMA AXIAL SRL is selling a profile wrapping line consisting of: Gbsdpfjw Auw Nex Aabju wrapping machine FUX 83-CLM-317 film cutting machine FUX 10-FCM-700 Total price 75,000 euros The machines can also be sold separately: wrapping machine FUX 83-CLM-317 – 60,000 euros film cutting machine FUX 10-FCM-700 – 20,000 euros

Condition: new, Year of construction: 2025, Banding machine for bundling multiple products with PE film without shrink process. Compact, robust design, easy to operate, quick film change. Bundle size: L(50-200)xW(50-130)H(30-280) mm; suitable bundle tape: PE film; PE film width: 40 ~ 80mm; PE film thickness: 50 ~ 80µm; Speed: max 10 bundles/minute at 10 boxes per bundle, max 15 bundles/minute at 5 boxes per bundle; power: 0.5kW, 220V /50Hz; compressed air: 6bar; dimensions: L1600xW600xH1500 mm; weight: 300kg. Gbedsv Nku Sepfx Aabju Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, Year of construction: 2006, Overview This machine was built in 2006 by Italian manufacturer Gamapck. The machine is in good production condition, already dismantled and stored in a warehouse. Techn. Details Capacity: Up to 45 packs / minute on single lane Last production was 16,000 bph (six packs) Bottles formats: PET bottles with shrinkable PE film 12 x 0,33L 6 x 0,50L 6 x 0,33L 24 x 0,50L Machine drive: Siemens S7 Machine equipped with Infeed conveyor & CE control panel Supplied with spare parts Gbedpfjw En Ugex Aabsu

Year of construction: 1965, condition: ready for operation (used), Suitable for the production of rigid PVC films with a minimum plasticizer content of 3%, number of rollers: 5, with documentation, retrofit 2003 and 2017. Gbodpfjquu Ttjx Aabju

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: EEE82, input voltage: 380 V, We are selling our fully operational high-speed Foodtainer packaging machine. The machine was exclusively used between April and June for sealing Foodtainers filled with asparagus. It has never let us down and has always been maintained whenever necessary. The complete user manual is available. Our technician will be happy to provide instruction on the machine. The machine can be inspected at short notice. Gbedpfsw Rnuiox Aabou

Condition: like new (used), Year of construction: 2018, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 3200 0088, overall weight: 1,500 kg, total length: 7,300 mm, total width: 1,100 mm, total height: 2,000 mm, type of input current: AC, cooling capacity: 30 kW (40.79 HP), operating speed: 83 mm/s, Manufacturer IBT.lnfraBioTech GmbH Art. No. 3200 0088 Technical Data Condition: as new; little used from test series Functionality: fully functional Year of manufacture: 2018 Connected load: 58 kW Cooling capacity, water connection on site: 30 kW Conveyor belt length: 7,000 mm Conveyor belt width: 310 mm Infeed height: 55 mm Infeed width: 1,460 mm TECHNICAL DETAILS Usage: Continuous oven for curing in film bonding technology Component temperature: max. 100°C Stainless steel housing (LxWxH): 7,300 x 1,100 x 1,680 mm Total height without control cabinet: 2000 mm Control cabinet (WxDxH): 1200 x 600 x 2100 mm Base made of stainless steel profile tube, height-adjustable: ± 30 mm Conveyor system Vacuum conveyor belt made of silicone, belt 310mm wide Transport speed: max. 5 m/min Conveyor belt height: 950 mm ± 30 mm Openings at belt infeed/outfeed (WxH): 308 x 35 mm Free zone at belt infeed: approx. 750 mm Free zone at belt outfeed: approx. 750 mm Conveyor belt operation: Continuous, adjustable up to max. 5m/min, straight running control centered on rollers with light barrier safety at inlet and outlet. Loading and unloading is manual.   Intended use The curing oven is a belt system for continuous operation with a feed speed of up to 5 m/min. There is an open area at the infeed and outfeed for loading and unloading components. Between these areas is the enclosed heating section with 6 IR modules (height-adjustable). The component temperature is a maximum of 100°C and serves to heat solvent-free adhesive between a film composite. The return section of the belt, the backs of the IR modules, and the area above the heating modules are water-cooled. The components are sucked onto the conveyor belt by negative pressure. The control cabinet is located outside the cleanroom, separated from the machine. The system operates in a cleanroom according to EN ISO 14644 Class 8 and is loaded and unloaded by the operator. The system is solely for the heating of a film composite. Equipment - 6 adjustable infrared heating modules, each with 6 infrared radiators - 6 pyrometers for precise temperature control - PU conveyor belt for efficient material flow - Integrated control and regulation system Gsdpfownm Ukox Aabjbu - Height-adjustable stainless steel substructure - Vacuum conveyor belt - Cooling water distribution in the subframe (G1") - Water cooling in the area of the belt return and the backs of the IR modules - Mechanically lockable service doors - Control panel mounted on the left side of the infeed - Control cabinet air conditioner, water connection on site History This oven was intended for use in a cleanroom environment and was barely used for a trial series. The oven was used for curing solvent-free adhesives between a film composite.

Year of construction: 2021, condition: ready for operation (used), There is one bottle packer A+F Contiflex with an integrated tray erector A+F Multiformer available, max. output: 220 bottles/min, connected load: 14kW, length: 7789mm, width: 1977mm, height: 3284mm, operational hours counter: ca. 600h, with complete documentation, an inspection is possible. Gbedjm Nckfepfx Aabeu

Condition: ready for operation (used), A total of 6 horizontal bag sealing machines Joke with vacuum and large container function are available. Seal length: 1000mm, sealing method: impulse sealing, sealing performance: 2x0.4mm, seam width: 6mm-8mm, rail opening: 30mm, throat depth: 153mm, machine dimensions X/Y/Z: approx. 1300mm/1100mm/1950mm. Documentation available. An on-site inspection is possible. Gbedpfx Asw R U Ateabju

Condition: ready for operation (used), A 13-layer blown film line Kuhne for the production of biaxially oriented high-barrier films is available. Film thickness range: 20µm-80µm, max. film width: 1400mm, max. output capacity: 400kg/h, extruders: 13 units, max. die head pressure: 500bar, flex ring die: 250mm/300mm, calibration tools: 200mm/225mm/250mm/280mm/300mm, yield: 80%-90%. Laminating films: sealing layer thickness: 25µm-35µm, printing layer thickness: 25µm-45µm. Monofilms: shrink lid thickness: 23µm-28µm, AF lid film thickness: 25µm-45µm, top and bottom film thickness: 75µm, balloon film thickness: 25µm-31µm. Documentation available. An on-site inspection is possible. Gjdpsw R Dh Eefx Aabsbu

Condition: ready for operation (used), Year of construction: 2019, Product length: 100-600mm, product width: 100-400mm, max. product height: 220mm, max. output: 30 cycles/min. With documentation, 22m long conveyor belt, e-commerce applications and many spare parts. Several pallets with roll film are available. On-site inspection is possible. Gbodpfx Aewal Iaeabju

Condition: ready for operation (used), Year of construction: 2005, Control system: Siemens SIMATIC OP7. The machine needs to be cleaned and serviced, is otherwise in working order and was in operation until the shutdown. An on-site inspection is possible. Gbodpfx Aaswal Imsbeu

Condition: ready for operation (used), Year of construction: 2018, A wrapper and packer for glass bottles from a bottling line are available. Bottle formats: 500ml/1000ml, crate formats: 6/12, pallet type: Euro pallet, height of loaded pallet min./max.: 500mm/1800mm, wrapping capacity: 60 pallets/h. Documentation available. On-site inspection is possible. Gedpfxottbdwo Aabsbu

Condition: ready for operation (used), Year of construction: 2001, A complete 5-layer coextrusion blown film line with 5 extruders and all peripheral equipment is available. Total line dimensions X/Y/Z: 14m/22m/11m, blow head: Kiefel Worms FSBK 500 with IBC, die diameter: 500mm, film width range: 700mm-2000mm, haul-off width: 2000mm, winding width: 2000mm, line speed: 120m/min, melting capacity: 500kg/h, total power requirement: approx. 300kW. 1) Double winder Wintech, winding width: 2000mm, film thickness range: 35µm-150µm, max. roll diameter: 1000mm, max. roll weight: 1900kg, core inner diameter: 152mm/6inch. 2) Extruder Kiefel Worms 70.29D, power: 89kW, screw: 5-zone barrier screw, speed: 125rpm, renewed: 2010. 3) Adhesive extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone barrier screw, speed: 200rpm. 4) Center extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone core progressive screw, speed: 175rpm. 5) Adhesion promoting extruder Kiefel Worms 50.25D for the outer layer, power: 34kW, screw: 3-zone barrier screw, speed: 200rpm. 6) Kiefel Worms 80.25D outer layer extruder, power: 125kW, screw: 5-zone barrier screw, speed: 150rpm. 7) Reinhold SRK 200/9.6 film calibrating device. The entire line is controlled by a Plast Control system. Further components: integrated width measurement, C-scan for profile measurement, web center control, corona pre-treatment, film pre-draw. Including a replacement FSBK 5-layer blow head with IBC, replacement rollers, annular gap blower with filter, suction units, crane and external system terminal. Documentation available. On-site inspection is possible. Gbjdpov T An Sjfx Aabju

Condition: ready for operation (used), Year of construction: 1993, A wrap-around tray packaging machine A+F for cheese packages is available. Nominal output: 10kW, PLC system: Siemens 115 U. Documentation available. On-site inspection is possible. Gjdpfx Aaowynvaobsbu

Year of construction: 2014, condition: ready for operation (used), Two identical Multivac C500 2-chamber vacuum packaging lines are available. Chamber dimensions X/Y/Z: 630mm/500mm/160mm, pump capacity: 63m³/h, sealing system: double seams, control: digital control, weight: approx. 250kg. Gbodpjttzxnsfx Aabeu

Condition: ready for operation (used), Year of construction: 1999, A semi-automatic Haver & Boecker bag filling machine is available. Stations: 6, max. bag weight: 25kg, filling capacity: 1600 bags/h, bag formats: Quicklime/hydrated lime/cement/gypsum, grain size: adjustable, control: Siemens S7. The machine was brought up to date in 2025. Documentation available. On-site inspection is possible. Gbsdpev Tcq Hsfx Aabju

Condition: ready for operation (used), Year of construction: 2002, Output: 400 cycles/h, conveyor belt: single-lane, bottle table: T-version, gripper head: 1-dimensionally adjustable, packaging unit: max. 9 heads. Bottle crate dimensions: 1l plastic crate: 400mm/300mm, 0.5 plastic crate: 300mm/200mm, max. conveying capacity: 1850mm, transport heights: Bottle table height: 1200mm, container height conveyor: 750mm, control: Siemens S7. Dimensions X/Y/Z: approx. 4200mm/1900mm/1900mm, weight: approx. 4300kg. Including gripper for 1l VDF and 0.5l NRW. Documentation available. On-site inspection is possible. Gjdpfstul Nrjx Aabobu

Year of construction: 2007, condition: ready for operation (used), Weight: 2t, an inspection is possible, with documentation. Gbjdpfx Aerp E Nreabou

Condition: ready for operation (used), Year of construction: 1991, A Kallfass Pack-Jet 2000 film packaging machine with a Kallfass Universal 450N shrink tunnel is available. Max. film roll width: 760 mm, rated power: 9 kW, operating voltage: 380 V, control voltage: 24 V, main fuse: 3x 20 A, rated current: 18 A. With Kallfass Universal 450N shrink tunnel, rated power: 16.5 +1 kW. System length: approx. 9000 mm, width: 1400 mm. The transformer for the sealing stamp is defective. On-site inspection is possible. Gedjw Nykmspfx Aabobu