Used Film Packer for sale (1,665)

Condition: used, Year of construction: 2021, functionality: fully functional, Dürr Ecopure VAR 2206 Thermal Oxidizer with Flue Gas Cleaning (2021) For burning liquid and gaseous waste streams including fluorinated gases, e.g. PFAS, and recovery of aqueous hydrogen fluoride Emissions limits SO2 ≤ 100 mg/Nm³ NOX ≤ 30 mg/Nm³ CO ≤ 50 mg/Nm³ CF4 ≤ 70 mg/Nm³ HF ≤ 1 mg/Nm³ NH3 ≤ 2 mg/Nm³ Comprising Direct fired thermal oxidizer Hot gas cooling and acid recovery Alkaline wet scrubber Honeycomb selective catalytic reduction deNOx system >1M cost spare parts Direct fired thermal oxidizer Including 2x natural gas combustion chambers and burners - High calorific liquid waste requires safe ignition supplemental hydrogen supply for acid formation - Gaseous waste streams injected via nozzles downstream and close to the burner - 1.5MW multi-fuel natural gas & liquid waste (minor fuel stream) burner with natural gas capacity up to 200Nm3/h - 1400C normal, 1540C max allowable temperature destruction of pollutants to reduce emissions with 3.28 MW thermal energy transfer - 2 seconds minimum residence time in combustion chamber at 1400C - 1,800mm combustion chamber internal dia. - Approx 300mm refractory lining - 2,400mm combustion chamber external dia. - 12,000mm combustion chamber internal length - 3.28MW maximum thermal capacity - 4,900Nm3/h, 60mbar, 14kW combustion air fans One chamber is active, the other one is on standby and can be prepared, repaired, or maintained. This allows minimizing shutdown and changeover time to only several days Wet scrubber hot gas cooling and acid recovery SGL Carbon Diabon HT-PQ 850 graphite pipe quencher - 6,000 Nm3/h capacity flow - 1,100 mm dia. - 2,000mm high - pumps Hodpfxez Ai Tpe Amuefl SGL Carbon Diabon THX-RS falling film absorber shell & tube heat exchanger - 1,100mm dia. - 4,500mm tube length - 595 no. tubes - 22mm tube internal dia. - Graphite, carbon steel - pumps Quench vessel - PP/FRP - 1,100mm dia. - Approx. 6,000mm high 2x Scrubber absorber columns, each - Shell FRP/PP - Internals PP - 1,000mm dia. - 11,000mm high - Pumps - Dosing station FRP 5m3 Emergency water tank - 1,600mm dia. - 3,000mm high - 3kW heating 2x Teblick 100,000L HDPE hydrofluoric acid tanks (2019) Honeycomb selective catalytic reduction deNOx system - 5,900Nm3/h, 130mbar, 42kW induced draft fan - 320 kW gas/gas heat exchanger - 500 kW capacity reheat burner - 1.2m deNOx honeycomb catalyst Clean gas outflow Stack with flow & temperature measurement Spare parts include - 200 items of sensors, pumps, valves, gaskets, joints etc. - Graphite quencher - Falling film absorber With the redesign and maintenance support of Dürr, the system could also - be adapted to other halogenated gases with bricks to be selected according to gas application - cope with the presence of VOCs or contaminated air - larger volumes with the addition of a small lance for 15kg/h liquid injection

Condition: used, Year of construction: 2006, functionality: fully functional, Film cutting machine, robust model FSM L15 Year of manufacture: 2006 Location: Bad Tölz Hfedpfx Ajzudzfsmusl Inspection is welcome. We have other used machines available. Please feel free to contact us.

Condition: used, Year of construction: 2002, 25 Cycles / min Hfodsz Ad Nfspfx Amusl

Year of construction: 2026, condition: new, The Mini Film Waste Pelletizing Line is designed for recycling low-bulk-density polymer waste at relatively low production capacities. It is a compact solution for processing film production waste and other lightweight plastic materials into reusable pellets. The system can process plastic film in either shredded or non-shredded form, depending on the type and condition of the material. Hfjdpfx Amjz Alnpjuel 1. Output Range: 70~90Kg/hour 2. Standard Electricity:380V/3 Phases/50 Hz 3. Main Motor Power: 18.5 кW 4. Total Power: 29 кW 5. Screw Dia. : 90mm 6. Filter: Dual stations manual filter 7. Cooling Method: air cooled 8. Material feeder pusher: equiped 9. Application: LDPE, HDPE, LLDPE pelletizing, scraps or rolls

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Manufacturer: WEILEDER Model: WTK -40/55 PT Category: Packaging machine Year of manufacture: 2018 Location: Ex site Availability: Short-term Operational condition: Dismantled/in storage Technical Data Passage width: 400 mm Passage height: 200 mm Workpiece length max.: 550 mm Film width max.: 600 mm Number of rollers bottom: 1 Hsdpfx Aoyatgcemuofl Total units: 1 Longitudinal units: 1 Magazine slots: 1 Packaging stations: 1 Conveyor technology: Stepless feed Shrink film: Longitudinal film station Discharge: Automatic version Mobile device closure Sealing units Conformity marking: CE marking Total connected load: 9 kW Space requirement length: 2.57 m Space requirement width: 0.87 m Space requirement height: 1.6 m

Condition: used, Year of construction: 2005, Machine, and good Condition Inspektion in our warehouse Hjdpjzzyxyofx Amusfl

Condition: used, Year of construction: 2006, machine/vehicle number: LC564, Used bottling line SIDEL for still water in PET bottles 25200 bph The used bottling line SIDEL for still water in PET bottles 25200 bph provides a complete solution for bottling still water. Currently, the line remains connected to power, so buyers can test it directly. SIDEL designed the system in 2006 to handle PET bottles ranging from 350 ml to 1.5 liters. As a result, the line maintains high productivity and flexibility. General line data This used bottling line SIDEL for still water in PET bottles 25200 bph processes up to 25200 bottles per hour. Specifically, it uses 30/25 neck-type bottles, which match standard formats across the industry. SIDEL equipped the line with a SB014 blow molder featuring 14 cavities. Furthermore, the filling and capping monoblock includes 40 filling valves and 10 capping heads, making it suitable for still products. Main installed machines The line includes, among other components, an AF high-pressure compressor (model CE46A) and a Fusheng low-pressure compressor (model SA110A). In addition, a BAC cooling tower manages process temperatures effectively. The SIDEL SB014 blow molder, which includes a hopper, feeder, and dust remover, connects directly to the SIDEL SFGL40/10 filling machine. Consequently, the line maintains efficiency across all stages. Labeling and packaging SIDEL integrated a Rollquattro labeler that applies roll-fed wraparound labels with precision. Moreover, a shrink-wrapper creates stable multi-pack bundles using plastic film. The VANTA WSD-B350 carton packer, built in 2011, handles up to 35 cartons per minute. Likewise, a palletizer automates the end-of-line phase, thereby preparing products for shipment. Conveying system and internal logistics Hjdpfx Aew Ahfyjmuofl The conveying system uses SIDEL-built conveyors throughout the process. Accordingly, the line ensures uninterrupted flow from the blow molder to the palletizer. Thanks to this automation, the system reduces manual intervention and improves consistency. In contrast to fragmented setups, this configuration enhances operational control and reduces downtime. Operating conditions and advantages This used bottling line SIDEL for still water in PET bottles 25200 bph operates under power and remains available for on-site testing. In practice, the integration of SIDEL machines improves performance while simplifying maintenance. As such, operators can rely on uniform quality and long-term reliability. Applications and compatibility The line suits facilities bottling still water in PET containers of multiple sizes. Importantly, its modular design enables quick format changes with minimal disruption. Because of this, companies can adapt to different production requirements. Notably, the system supports both small batches and high-volume output. T...

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: TZ-JRT-30B-2800, Automatic log-cutting machine for toilet paper and hand towel cutting Fully automatic operation with advanced PLC control, LCD touchscreen, and servo motor. The machine is designed to minimize manual intervention, reduce labour requirements, and improve operator safety. The main operating parameters are set directly via the touchscreen PLC. The machine can be integrated with a converting and rewinding line for more efficient production. Designed for long-term industrial operation. Major components are imported, with the remaining components sourced from quality Chinese manufacturers. Technical Specifications Cutting diameter: 130–250 mm, adjustable via PLC Cutting length:50–380 mm, adjustable via PLC Maximum log length: 2,750 mm, adjustable via PLC Log lengths: Adjustable via PLC Cutting speed: Manually adjusted according to log diameter, thickness and cutting length Maximum stable operation speed: Up to 20 cuts/min for logs below 210 mm diameter and cutting lengths of 50–220 mm For cutting lengths above 220 mm: Automatic speed adjustment to approximately 10 cuts/min Automatic blade sharpening Automatic log loading/pick-up table Log storage rack with automatic feeding Automatic waste/reject removal via mechanical pusher (if using the push hand) Electrical connection: 3 × 400 V, 40 A Compressed air: 0.6 MPa Machine dimensions: 3,500 × 2,500 × 2,000 mm Weight: Approximately 3,000 kg (2 parts, cutter and the mechanical pusher) Country of manufacture: China Machine Condition The machine has been in operation at the factory and has been running without any major issues. Installation year 2020, running conditions about 7hrs /one shift. Hsdpjzxnmysfx Amuofl The following maintenance/repairs have been carried out: * Upper drive bearings replaced (2025) * Lower drive bearings replaced (2026) * Drive belts replaced (2026) * Damaged motion-control wiring repaired/replaced (2026) * Every 3-month inspection * Every 6-month lubrication of moving parts The machine is currently dismantled and stored in a dry warehouse. It can be inspected in its dismantled condition. Spare Parts Included Band saw blades: 4,400 × 70 × 0.65 mm price €105/pc, 9 unused blades, 1 sharpened and ready-to-work condition blade, 1 sharpened and ready-to-work blade (width narrow, still can cut most of the articles) Diamond grinding wheels: €80/pc, 1 spare New dust collector/vacuum system: €1,100 - purchased new but never installed (2-way suction and 1-way blown-in, with collection bin, direct attachment to the cutter) Other Information * Made in China - technical support within 24 hrs, spare parts in about 2 weeks. * Automatic operation * PLC + LCD touchscreen control (screen has original protection film still attached) * Servo-driven system * Suitable for toilet paper and hand towel logs * Suitable for integration into a converting/rewinding production line * Machine dismantled for storage Export outside the Baltic States Inspection possible by prior arrangement. Videos: youtu.be/8-xRCmvARYM youtube.com/shorts/vU4EunMEQt4 youtube.com/shorts/wwuV2Gp30AY youtube.com/shorts/WZjjokJjgZY

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, Coating, laminating – additional unwinder for lamination Corona treatment – during coating of film with water-based dispersions Working width – 1700 mm Coating speed – 0–100 m/min Material in rolls Raw material – paper (50–300 g/m²), film (0.023–0.10 mm) Substances – solvent-based adhesive, water-based adhesive Type of coating – coating head: Mayer rod, anilox roller, slot die roller Hjdpfx Amexwaikjuofl Dryer – length 18 m, 7 drying sections, temperature 30°C–170°C, gas drying (blower) Roll diameter – max 1400 mm Machine includes hot air generator Detailed description available on request.

Condition: used, Year of construction: 2009, Overview This SMI TF350 is a tray packing machine for PET bottles, built in 2009 by SMI (Italy). It forms cardboard trays from flat blanks and packs PET bottles at an output of 45 to 50 packs per minute. Tray forming is carried out with an integrated Nordson ProBlue 4 hot-melt adhesive unit. The machine is fully enclosed by a safety guard with large viewing panels and hinged access doors, and is operated from a control cabinet mounted on the machine frame. It has been running as the tray packer of a PET bottling line for mineral water and soft drinks, and is still installed and under power, so it can be inspected in production. Technical data - Manufacturer: SMI (Italy) - Model: TF350 - Year of manufacture: 2009 - Machine type: tray packer for PET bottles Hfsdpfxozuw H Ue Amuel - Output: 45 - 50 packs/min - Adhesive system: Nordson ProBlue 4 hot-melt unit - Packaging material: flat cardboard blanks - Guarding: full safety enclosure with viewing panels and access doors - Location: Germany Equipment - Nordson ProBlue 4 hot-melt adhesive melter - Magazine for flat cardboard blanks - Machine-mounted control cabinet - Full safety enclosure with viewing panels and hinged access doors Condition Very good, well-maintained condition. Extensive annual overhauls have been carried out by the manufacturer. The machine is still installed and under power and can be inspected in operation on site. Availability The machine remains in production until 30 September 2026. Dismantling and loading onto the buyer's trucks will take place between 7 and 10 October 2026 and can be carried out by the seller. The machine is located in Germany.

Condition: used, Second-hand machine Features and technical specifications: - Film material: LLDPE - Film width 500 m - Max. roller diameter 250 mm - max. film thickness 35 µm - Roller core diameter 76 mm Hsdpfx Aszlbt Hsmusfl - Max. pallet length 1,675 mm - Max. pallet width 1,675 mm - Max. pallet height 2,200 mm - Max. pallet weight 1,500 kg - with access ramp - Dimensions approx. 3000 x 2000 x 3200 mm - Weight approx. 750 kg Availability: at short notice Storage location: 63934 Röllbach

Condition: new, Semi-automatic sleeve packer including shrink tunnel for film wrapping of large products. Technical data sleeve packer: max. speed of the machine in neutral: 10 cycles/min; max. product dimensions (mm): L500xW300xH330; Hfedpjv Hp U Sefx Amusl sealing blade width: 700mm; power supply: ~380V, 50Hz; power consumption: 1.5kW; air pressure: max. 0.6MPa; compressed air consumption: 0.1m³/min; dimensions: L1100xW1100xH2250mm. Technical data shrink tunnel: suitable film: PE or PVC film; max. suitable product size: W450xH350mm; speed max. 13m/min; power supply: ~380V, 50Hz; power consumption: 24kW; dimensions: L2570xw850xH1580mm.

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, color channels: CMYK, number of print heads: 2, We are offering this used Mimaki TxF300-75 DTF roll-to-roll printing machine and the accompanying Adkins dryer with powdering unit. Year of manufacture: 2024 Condition: Ready for use / currently still in operation. Otherwise, please see the photos. Hjdpfjzn Iqqex Amujfl We also have other machines of the same design available. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2012, Overview This tray packer was manufactured in 2012 by the german manufacturer MEYPACK. It is already dismantled and stored in the BEVMAQ warehouses. The conveyor system is not included, the inlet and tray magazine are included. Technical data  - type: VP500 - year of manufacture: 2012 - Total output: 20 cycles/min - length 8000 mm | width 1600 mm | infeed and outfeed height: 1250 mm - packaging data:  - length: 100-300 mm - width: 200-450 mm - height: 60-350 mm - height of tray edging: 40-100 mm - pre-cut: - length: 200-500 mm - width: 290-600 mm - power: 400V,N,PE | 10kW/33A |  - air: 6-7 bar | 20 NL/cycle Hsdpfx Amjyb Sqveuefl

Year of construction: 2016, operating hours: 40 h, condition: like new (used), functionality: fully functional, 💎 Highlight: Only approximately 60,000 packs (approximately 40 operating hours) processed during the trial run! For sale is an absolutely like-new, high-end thermoforming packaging machine, a MULTIVAC R 245, in the extremely rare and hygienic medical version (Clean Design) (pp. 2, 15). The machine was purchased in 2016 for a medical project and was only used for a few test cycles in the sterile cleanroom. It is in absolute factory condition, both mechanically and visually (pp. 1-2). • Manufacturer: MULTIVAC Sepp Haggenmüller SE & Co. KG (p. 1) • Type: R 245 Medical / Clean Design (pp. 2, 15) • Year of manufacture: End of 2016 (pp. 1, 3) • Condition: Like new, unused (New Old Stock), stored in the cleanroom, dust-free • Operating hours: Only approximately 60,000 individual packs (equivalent to approximately 15 cycles) (p. 14) 📦 Technical data & dimensions • Total footprint (L x W x H): approximately 700 cm x 140 cm x 230 cm (including discharge conveyor) • Frame length, base machine: 5,500 mm (divisible frame for easier transport) (p. 6) • Machine nominal width (bottom film): 355 mm (worldwide standard, easily available) (pp. 6, 23) • Top film width: 342 mm (pp. 2, 23) • Infeed path: Comfortable, knee-free infeed path of 1,125 mm (p. 6) • Power supply: 400 V / 50 Hz / 3 phases (p. 8) • ATTENTION: no compressor included! 🛠️ Tool & format data (4-cavity contour tool) The installed original tool provides a highly precise, visually appealing contour packaging (ergonomic oval/drop shape), ideal for premium products (p. 14): • Format layout: 4 lanes side by side / 1 row (pp. 13-14) • Actual cavity inner dimensions per cavity (L x W): 152 mm x 64 mm (pp. 14, 16) • Package outer dimensions (L x W): 185 mm x 82 mm (pp. 14, 23) • Package depth: 19.5 mm (mold plate type 5, directly water-cooled) (pp. 14-15) • Infeed / discharge length: 185 mm (pp. 13-14) Hsdpfx Amezwgxrjuofl ✨ Premium features & expensive optional extras (included!) • Integrated printer: MULTIVAC MR293 HP/TT in-line direct printing system with a fully integrated MULTIVAC TTO 10 thermal transfer printer (300 dpi) for printing logos, batch numbers, and expiration dates directly in the control system (pp. 19-20). • Integrated chiller: Rittal air/water heat exchanger in a stainless steel housing for self-contained tool cooling in a closed circuit (no external water connection required) (pp. 6, 11). • Automated discharge conveyor: High-quality Intralox discharge conveyor (800 mm) with a blue Intralox chain and its own frequency inverter for synchronous package transfer (p. 12). • Scrap film management: Original MULTIVAC RSW 20 edge strip winder with integrated tear-off control and winding drive for clean film disposal (p. 12). • Gas flushing device (MAP): Gas injection bars installed on the tool side for packaging under modified atmosphere are available. • Control system: Modern 12.1" color touchscreen terminal with HMI 2.0 user interface and IPC 06 control (Windows Embedded) (pp. 9-10). • Documentation: Operating manual, spare parts catalog, electrical and pneumatic wiring diagrams in German included in the scope of delivery (pp. 19-20). 💰 Price € 39,900,- net, excluding VAT. • Shipping costs: Available upon request, throughout Europe • Delivery time: Immediately available • Inspection and collection: possible at any time by appointment (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our general terms and conditions, all prices excl. VAT, ex wareh

Year of construction: 2010, condition: excellent (used), Automatic pallet wrapper with film pre-stretching Inventory no. 3928 Manufacturer: ProtoWraptor Type: PLUS - IDP Hsdpeychv Djfx Amujfl * Turntable positioning via fixed stop * Number of top and bottom wraps * Turntable diameter: 1650 mm !!!! * Max. wrapping height: approx. 2400 mm !! * Own weight: approx. 450 kg * Suitable for Euro pallets and block pallets!!! * Ramp!!! * In very good condition.

Year of construction: 2017, condition: used, functionality: unexamined, Leased vehicle returned Hodpfxezwck Do Amusfl Approximate transport dimensions: 50x175x96 cm, approx. 30 kg Serial number: 41049060917 Stock ID: 13500329

Year of construction: 2023, condition: used, Henkovac vacuum packers brand-new 2023 models available from stock. Advertised in the photo's Henkovac M4 Henkovac M6 Hjdpfx Amsku H I Seuefl Henkovac D1 Henkovac D4 All models are equipped with upgraded vacuum pumps for more performance, sensor control, filling plates, soft-air. Contact us for more specific information and photo's.

Condition: good (used), Year of construction: 1990, type of input current: three-phase, Film wrapping machine + shrink tunnel KUPER DUPLEX 2100/650 + KUPER ST/I-1400 Film wrapping machine Manufacturer: Kuper Type: DUPLEX 2100/650 Year of manufacture: 1995 Film roll width at the top: 2000 mm Film roll width at the bottom: 2000 mm Packaged goods height (passage height): 650 mm Film roll diameter: 400 mm Compressed air: min 5 bar Compressed air consumption (per cycle): approx. 16 L swing arm with chain lift seal bar length 2100 mm "Siemens" control panel overall dimensions: 3000x2000x2300 mm Hsdpfx Aekn Rz Hemuofl Shrink tunnel: Manufacturer: Kuper ST/I-1400 year of manufacture: ca 1988 max capacity: width: 1350mm height: 650mm work length: 3000mm 2 pcs centrifugal fan blow-off units heating power: 59 kW temperature range 230 °C endless conveyor belt throughput speed 5 m/min Length: 3500 mm Width: 2350 mm Height: 1850 mm

Condition: excellent (used), Year of construction: 1979, functionality: fully functional, KAMPF (LONGITUDINAL SLITTER) Hfodpozktycofx Amuel Desscription:: Year 1979, width 1600 mm, speed 600 m/min Machine is in very good condition and can be seen in production!

Condition: used, Year of construction: 2002, An automatic Pfankuch collating and OPP film wrapping machine for flat products is offered. Max. film roll width: 600mm, max. film roll diameter: 250mm, film core diameter: 76mm, film thickness range: 15µm-40µm, max. production output: 100packs/min, product-dependent, top film material: polypropylene OPP/COEX/Cast, bottom film: polypropylene OPP/COEX. Dimensions: approx. 6000mm/1000mm. Documentation available. Inspection possible by arrangement. Hfjdpfxszvgh Re Amuol

Condition: ready for operation (used), Year of construction: 2020, Longitudinal sealing: continuous, photo cells: horizontal/vertical, working height range: 760mm-960mm, max. transport speed: 30m/min, film core diameter: 76mm, max. film roll diameter: 350mm, max. film roll width: 650mm, sealing stamp width: 300mm, product width range: 50mm-410mm, product height range: 1mm-250mm, min. product length: 50mm, film thickness range: 7µm-80µm, max. output rate: 85cycles/min, materials: POF/PE/PVC/PLA/bio films. Machine dimensions X/Y/Z: approx. 2200mm/1700mm/1800mm, weight: approx. 800kg. Documentation available. An on-site inspection is possible. Hfedpfx Aexuvnqemuol

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, PAPERPLAST DRY 70 - 102, Samal 102X114, including 70 pallets of BOPP film. Year 2007 Currently in production in the UK Automatic thermal film laminator Automatic sheet feeder Vacuum infeed table Laminating unit with heated chrome cylinder ICS heating unit Sheet separation unit, pile delivery unit Usable working width (mm): 1020 Minimum size (mm): 250 x 280 Maximum size (mm): 1020 x 1400 Hodpfxoy Iy Nhe Amuefl Mechanical speed: 70 m/min. Size: 102 mm x 116 mm Minimum size: 30 x 28 cm, speed up to 70 m/min. + approximately 70 pallets of film (list of offered films in the attachment).

Condition: new, Year of construction: 2024, functionality: fully functional, Robotic Case Packing Station for Display Cartons The offer does not include implementation, installation, and transport. Automated packaging line designed for packing products into display cartons and plastic E2 containers. The machine is brand new (post-production tests completed). Operating Description: Automatically picks, glues, and forms cartons, placing them onto a conveyor. Products are identified by a Keyence vision system on the input conveyor. An advanced line-tracking system calculates the precise pick location for one of the three FANUC M3IA6S delta robots. Vacuum gripper-equipped robots accurately place products into cartons, automatically queuing them. A FANUC LRM200ID (6-axis robot) automatically places lids onto cartons. The completed carton is sealed by a Nordson system and exits the machine. Quick automatic changeover capability to E2 plastic containers (changeover time less than 1 minute). Technical Parameters: Carton forming: 6-7 pcs/min. Product packing rate: 100-110 packs/min (carton or E2) Changeover between carton types: under 5 min (with operator) Changeover carton ↔ E2: under 1 min (fully automatic) Equipment Specification: Delta robots: 3 × FANUC M3IA6S 6-axis robot: FANUC LRM200ID Control system: Allen Bradley GuardLogix 5380 PLC Hfjdpfxjwmm Tde Amuol Servo drives: Kinetix 5100, Kinetix 5700 Pneumatic and gantry drives: FESTO Motor drives: NORD Safety: Magnetic safety locks Keyence GS-M Vision system: Keyence monochrome camera 2 MPX, ring lighting Sealing system: Nordson MELTER PBF240 Operator panel: Allen Bradley PanelView 5510 (19", color) Structure: Modular stainless steel (easy transport and installation) Machine available immediately, brand new equipment. Tests and adaptation to specific product requirements are possible. Price does not include installation or product-specific adaptation costs. The featured video of the machine's operation shows the previous model.

Year of construction: 2019, condition: like new (used), Automatic intermittent-motion machine designed in accordance with cGMP standards for wrapping with stretch film. Conceived primarily for the cosmetics and pharmaceutical markets, simplicity of design and high-speed output are its main features. Main features: Servo driven motor guarantees reliability and synchronized movement even at high speed Machine and motors managed by PC Balcony style structure with clear division between mechanical parts situated at the rear of the machine and product flow at the front Ergonomic structure facilitates machine inspection and provides high workflow visibility Hodpfsyb Tvtjx Amusfl Simple and linear construction for easy cleaning Speed, strokes and single group positions are set up from the PC by programmable logics, making correct machine set-up automatic and size changeover extremely quick and easy