Used Film Processor for sale (1,744)

Year of construction: 2019, condition: ready for operation (used), Length: 5650mm, width: 2960mm, height: 1850mm, with documentation, without lifting device and roller conveyer, an inspection is possible. Dujdpfjp R R H Iex Afpjn

Condition: used, Year of construction: 2005, Material type: LDPE, LLDPE, mLLDPE, HDPE, PP, regranulate Machine dimensions (LxWxH): 16 X 5 X 10.5 m Min/Max final Film width: 900 / 1700 mm Film thickness: 27–200 µm Capacity: Up to 240 kg/h Line speed: 0–150 m/min Screw diameter: 55/65/55 Layer ratio: Up to 25/50/25 % L/D ratio: 30/1 Number of heating zones: 3 for 55 mm and 4 for 65 mm (1 zone per screen) Dosing system: Doteco Grado; 3 units with 4 components each; centralized vacuum pump (added later); all scales fully serviced last year; new software and external touch screen; neck (before extruder) with additional magnets Electronics: Siemens, ABB Software: Macchi’s; full control via touch screen (replaced 3–4 years ago) Die head with IBC: 280 mm; 2.4 mm gap (3 heating zones); TE502 model with air ring extension Internal cooling balloon diameter control (IBC) Ultrasonic sensor (1 unit); JET internal cooling system Air ring: Karat, with 3 air inlets, 45 segments (valves), with integrated thickness control Air ring blower: YES Thermoregulation chiller: YES (Eurochiller) Bubble cage: YES; rollers with silicone cover; motorized electronic control; secondary cage with motorized open/close and adjustment Thickness control: K design (Karat, Kundig K-150); contact system integrated with air ring Duedpfsw Nhavox Afpon Collapsing frame: Free aluminum rollers Rotation: Nip roller 1800 mm (max film width 1700 mm); motorized open/close; speed control motor; other free rollers in aluminum; 2 ceramic air rollers for cooling Water-cooled rollers after nip roller: / Film centering: 2 ultrasonic sensors (Five) Corona treatment (double-sided): YES (F&B); above winders; 8 kW generator; ozone extractor and film detector; 10 mm electrode width Winders: Back-to-bac Winder model: Model BO; nip roller 1800 mm (max film width 1700 mm); manual shaft placement; max roll diameter 1000 mm; trim and multiple output rolls; film tension and winding control; 2 banana rollers; ‘flying knife’ (new Origa knife installed a few years ago); electric panel included Shafts: 4 x 76 mm and 4 x 152 mm Trim suction: YES; includes Supergrillo regranulation system Frame construction: YES Installed power: Approx. 150–200 kW (400 V, 3-phase

Condition: good (used), Strech film machine Brand:Nissen Type:2400 Serie no:1469 Year:1999 Techn info: Dsdpfx Aop T Tz Aefpsun Rotating plate 2400mm in diameter Max hight wrapping approx. 2000mm Total hight column 2450mm Stock no:2001830BXM

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Offered is an Urschel COMITROL Processor Model 3600 Slant. Slant processor. Complete with steel frame and tank. Never used. Year of manufacture: 2020. Duedpjxl R Efsfx Afpsn

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: K500-50739, total length: 14,000 mm, total height: 2,500 mm, total width: 3,600 mm, type of input current: three-phase, product height (max.): 100 mm, product height (min.): 30 mm, product length (min.): 500 mm, product length (max.): 1,800 mm, product width (max.): 1,500 mm, product width (min.): 600 mm, input voltage: 400 V, compressed air connection: 6 bar, input current: 33 A, working height: 900 mm, table width: 1,700 mm, table length: 2,000 mm, passage height: 250 mm, year of last overhaul: 2022, workpiece weight (max.): 100 kg, Equipment: documentation/manual, Dimensions of the entire machine: Width: 3,600 mm Length: 10,600 mm (without feed and deposit areas) Height: = 2,500 mm Working height: 900 + 50 mm Feed rate: 13 - 23 m/min (frequency-controlled) Properties of the PE shrink flat film • Shrink film suitable for the shrink sealing process. (Top and bottom films must be laterally sealable in the tunnel). • Biaxial shrinkage value of approximately 50-60% lengthwise, approximately 40-50% crosswise • Antistatic treatment. • Shrink film with needle perforation. Improves the shrinking process and has higher gas and water vapor permeability. Shrink film to be used • Biaxially shrinking, needle perforated. • Spooled on rolls, sound-tight and with straight edges. Foil thickness: Application: approx. 40 - 60 μm. Film widths: Application: 800 mm, 1100 mm, 2000 mm Roll outer diameter: max. 350 mm Core outer diameter: min. 90 mm Bottom film calculation: Package width + 200-250 mm Top film calculation: Package width + (2 x height) + 200-250 mm Technical component data: Conveyor belts: Infeed conveyor (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. Roller conveyor behind the tunnel (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. KFE standard film wrapping machine: Max. film roll width, top and bottom: 2,100 mm / Package height (passage height): max. 250 mm / max. Film roll diameter: 350 mm Film thickness: approx. 40-60 µm high-quality PE film / Weight: approx. 3,100 kg Side sealing: Sealing bar length: 1,850 mm / Adjustment range: 500 - 1,600 mm / Adjustable feed rate: 13 - 23 m/min. Shrink tunnel ST / lI -1800 -3000 -300: Clear hood opening: 1,860 mm wide / 300 mm high / Hood length: 3,000 mm / Transport length: 3,560 mm Adjustable feed rate: 6 - 23 m/min. Dedpfjvvlyiox Afpjun The machine can be inspected at the production site.

Year of construction: 2025, condition: new, functionality: fully functional, Chain for Multivac packaging machines, the so-called film transport chain (clamp chain) 5/8 inch CRG. Suitable for all models. Dusdsv Dhnxspfx Afpen The chain is sold by the meter! Chain for Multivac packaging machines, the so-called film transport chain (clamp chain) 5/8 inch CRG. Suitable for all models. The chain is sold by the meter!

Condition: ready for operation (used), An AVT flat film packaging machine including an angled conveyor belt is available. Film type: PE/PP, film width range: 120mm-600mm, film thickness range: 40µm-200µm, machine dimensions X/Y: approx. 1400mm/1400mm, weight: approx. 250kg, control: Siemens. Documentation available. An on-site inspection is possible. Duodexf Iihjpfx Afpjn

Year of construction: 2000, condition: used, 3 feeders 1 folding station adressing unit Sitma 950 foil wrapping machine infeed to the stacker with reject unit stacker Dodpfx Afjdiyknopsun belt delivery

Year of construction: 2000, condition: good (used), Cyklop Pallet strapping & film wrapping line: Cyklop XZE-311-22 pallet strapping Cyklop GL 1020M - pallet film wrapping Build in 2000 (XZE-M) 2000 (GL 1020M) Pallet strapper Cyklop XZE-311-22: Speed: up to 100 Palles/h Pallet sizes: 800x1200 mm, 1000x1200, 1200x1200 mm Passage height: max 2700 mm (from floor) min height pallet conveyors: 300 mm max palletizing height: ~2500 mm - height conveyors (incl. pallet) max weight pallet: 1.500 kg Height over all: ~4200 mm Elektrical: 400 VAC, 3Ph/N/PE, 50 Hz, ~6 kW Dimensions (L x W x H): appr. 2.000 x 7.000 (incl. strapping reels) x 4.200 mm Weight: ca. 4.000 kg GL 1020M: Speed: up to 50 Pallets/h Pallet sizes: 800x1200 mm, 1000x1200, 1200x1200 mm Passage height: max 2200 mm (from bottom pallet) min height pallet conveyors: 300 mm Working height: 500 - 2000 mm (inkl. Palette) Film, outside (new) reel diameter: max 400 mm Film, reel width: max 500 mm Film thickness: 17/23/35 µm max pallet weight: 1.500 kg Elektrical: 400 VAC, 3Ph/N/PE, 50 Hz, ~3 kW Dimensions (L x W x H) : ca. 1.800 x 3.000 x 3.500 mm Weight: appr. 1.500 kg Equipment: Complete line, "L"-configuration (long leg ~20m, short leg ~5m) for pallet strapping & stretch wrapping, configured as follows: > Infeed position for pallets, motorized > pallet strapper Cyklop XZE with two strapping heads, three strap guides, integrated turntable for cross-strapping of pallets > buffer position for pallets, motorized > pallet film wrapper Cyklop GL 1020, film dispensing through fix lateral arm with pallet rotating on turntable > buffer position for pallets, motorized > turntable for pallets, 90° turn left or right, motorized > ejection of the turned pallet onto pick-up positions, motorized SEE LAYOUT FOR MORE INFO" Djdpfeg A Hflex Afpsun

Year of construction: 2010, condition: good (used), Cyklop Pallet strapping & film wrapping line: Cyklop XZE-311-22 pallet strapping Cyklop GL 1020M - pallet film wrapping Build in 2010 (XZE-M) 2006 (GL 1020M) Pallet strapper Cyklop XZE-311-22: Speed: up to 100 Palles/h Pallet sizes: 800x1200 mm, 1000x1200, 1200x1200 mm Dedog S Twuopfx Afpeun Passage height: max 2700 mm (from floor) min height pallet conveyors: 300 mm max palletizing height: ~2500 mm - height conveyors (incl. pallet) max weight pallet: 1.500 kg Height over all: ~4200 mm Elektrical: 400 VAC, 3Ph/N/PE, 50 Hz, ~6 kW Dimensions (L x W x H): appr. 2.000 x 7.000 (incl. strapping reels) x 4.200 mm Weight: ca. 4.000 kg GL 1020M: Speed: up to 50 Pallets/h Pallet sizes: 800x1200 mm, 1000x1200, 1200x1200 mm Passage height: max 2200 mm (from bottom pallet) min height pallet conveyors: 300 mm Working height: 500 - 2000 mm (inkl. Palette) Film, outside (new) reel diameter: max 400 mm Film, reel width: max 500 mm Film thickness: 17/23/35 µm max pallet weight: 1.500 kg Elektrical: 400 VAC, 3Ph/N/PE, 50 Hz, ~3 kW Dimensions (L x W x H) : ca. 1.800 x 3.000 x 3.500 mm Weight: appr. 1.500 kg Equipment: Complete line, "L"-configuration (long leg ~20m, short leg ~5m) for pallet strapping & stretch wrapping, configured as follows: > Infeed position for pallets, motorized > pallet strapper Cyklop XZE with two strapping heads, three strap guides, integrated turntable for cross-strapping of pallets > buffer position for pallets, motorized > pallet film wrapper Cyklop GL 1020, film dispensing through fix lateral arm with pallet rotating on turntable > buffer position for pallets, motorized > turntable for pallets, 90° turn left or right, motorized > ejection of the turned pallet onto pick-up positions, motorized SEE LAYOUT FOR MORE INFO"

Year of construction: 2004, condition: good (used), Build in 2004 Description/configuration: Complete line for automatic pallet strapping, automatic stretch-wrapping of pallets. Includes fully automated pallet conveying. Line with ""straight""-configuration, built with chain conveyors and configured as follows: > Straight chain conveyor, motorized, travel is long side leading, l~1100 mm, REF 25778.01 > pallet strapper Cyklop XZE-3111, REF 25778.30 Dsdohrmlkopfx Afpsun > Straight chain conveyor, motorized, travel is long side leading, l~1100 mm, REF 25778.02 > Straight chain conveyor underneath wrapper, motorized, travel is long side leading, l~2600 mm, REF 25778.03 > ring style pallet film wrapper Cyklop GL 2000, REF 25778.40 > Straight chain conveyor, motorized, travel is long side leading, l~1100 mm, REF 25778.04 > Straight chain conveyor, motorized, travel is long side leading, l~1100 mm, REF 25778.04" Layout available max speed in pallets/h: 50 pallets/h Chain conveyor Pallet width of up to 800 mm Pallet length of up to 1200 mm max height full pallet (max passage height): ~1700 mm Height of pallet conveying (min=300mm): ~400 mm max weight full pallet: ~1500 kg Over all length equipment: ~8000 mm Over all width equipment: ~6000 mm Over all height equipment: ~3500 mm Input Power: ~15 kw (whole line) Voltage: 400 V, 3 Ph, 50 Hz Air requirement: 6 bar Equipment at central warehouse Helmstedt with nearest airports: Hannover (~1,5 hrs), Leipzig (~2hrs), Berlin (~2,5 hrs) Condition: cleaned & in working conditions Machine available: upon request

Year of construction: 2001, condition: good (used), Build in :2001 (Cyklop XZE-311-22), 2001 (Cyklop GL 2000) Description/configuration: Complete line for automatic pallet strapping (double or cross), automatic stretch-wrapping of pallets. Includes fully automated pallet conveying. Complete line with multiple infeed positions, configured as follows: > infeed conveyor with fenders (bump protection), motorized, l~1500 mm, REF 25643.02 > roller conveyor (buffer), motorized, l~1500 mm, REF 25643.02 > chain transfer conveyor, motorized, l~3700 mm, REF 25463.03 > roller conveyor (buffer), motorized, l~1500 mm, REF 25643.04 > roller conveyor (buffer), motorized, l~1500 mm, REF 25643.05 > roller conveyor, with fenders (bump protection),motorized, l~1500 mm, REF 25643.06 > roller conveyor (buffer), motorized, l~1500 mm, REF 25643.07 > roller conveyor (buffer), motorized, l~1500 mm, REF 25643.08 > chain transfer conveyor, motorized, l~3000 mm, REF 25463.09 > chain transfer conveyor, motorized, l~3000 mm, REF 25463.10 > roller conveyor (buffer), motorized, l~1800 mm, REF 25643.11 > pallet strapper Cyklop XZE, REF 25643.30 > roller conveyor (buffer), motorized, l~1500 mm, REF 25643.12 > roller conveyor underneath wrapper, motorized, with pallet lifting device, l~2100 mm, REF 25643.13 > pallet film wrapper GL 2000 ring style, REF 25463.40 > roller conveyor (buffer), motorized, l~1500 mm, REF 25643.14 > roller conveyor (buffer), motorized, l~1500 mm, REF 25643.15 > 90° turntable conveyor, motorized, l~1800 mm, REF 25643.16 > roller conveyor (buffer), motorized, l~1500 mm, REF 25643.17 > pick-up position for strapped & wrapped pallets, with fenders (bump protection), motorized, l~1500 mm, REF 25643.17 max speed in pallets/h: 50 pallets/h Djdpshtmp Tjfx Afpoun Roller conveyor, Chain conveyor (transfer conveyors) Pallet width of up to 800 mm Pallet length of up to 1200 mm max height full pallet (max passage height): ~2000 mm max weight full pallet: 1500 kg Over all length equipment: ~16000 mm Over all width equipment: ~9000 mm Over all height equipment: ~4200 mm Voltage: 400 V, 3 Ph, 50 Hz Air requirement: 6 bar Equipment at central warehouse Helmstedt with nearest airports: Hannover (~1 hrs), Berlin (~2 hrs)

Condition: good (used), Build in 2006 Komfi Aspira Laminating machine Max laminating speed 15 m/min Max sheet width 52 cm Sheet size max. 52x74 cm; min. 20x20 cm Duodpjgyzzuofx Afpsn Paper weight . 115-350g/sqm.

Year of construction: 2009, condition: good (used), Built in: 2009/2005 Size: min 100 x 120 mm max 300 x 430 mm Thickness: max 40 mm Film thickness 20-100 mµ Mechanical speed: 25,000 Ex./h Equipment: • 10 stations rollstream ROS • 1 VSE-ROS-ES-RE-300-KWE twin multi disc unwind station AWS • 4 MTD-AWS-OWK • built in 2005 JET Feeder Dodpfx Asc Icm Rsfpoun • 8 JEF-450-FVM-SA190 • built in 2005 foil wrapping machine CMC 2800 • with two feeders • built in 2009 twin stacker CMC

Year of construction: 2020, condition: ready for operation (used), Treatment width: 8mm-12mm, max. plasma generator diameter: 32mm, plasma generator length: 210mm, cable length: 3m, inlet pressure: 5bar-8bar, gas consumption: approx. 2m³/h, generator power: 300W, frequency: approx. 40kHz, dimensions X/Y/Z: approx. 420mm/140mm/500mm, control: manual/semi-automatic, operating hours: 81h. Documentation available. On-site inspection is possible. Djdot I Tydopfx Afpjun

Condition: ready for operation (used), Year of construction: 1991, A Kallfass Pack-Jet 2000 film packaging machine with a Kallfass Universal 450N shrink tunnel is available. Max. film roll width: 760 mm, rated power: 9 kW, operating voltage: 380 V, control voltage: 24 V, main fuse: 3x 20 A, rated current: 18 A. With Kallfass Universal 450N shrink tunnel, rated power: 16.5 +1 kW. System length: approx. 9000 mm, width: 1400 mm. The transformer for the sealing stamp is defective. On-site inspection is possible. Dsdpfxsw Nykmj Afpjun

Condition: ready for operation (used), Year of construction: 2001, A complete 5-layer coextrusion blown film line with 5 extruders and all peripheral equipment is available. Total line dimensions X/Y/Z: 14m/22m/11m, blow head: Kiefel Worms FSBK 500 with IBC, die diameter: 500mm, film width range: 700mm-2000mm, haul-off width: 2000mm, winding width: 2000mm, line speed: 120m/min, melting capacity: 500kg/h, total power requirement: approx. 300kW. 1) Double winder Wintech, winding width: 2000mm, film thickness range: 35µm-150µm, max. roll diameter: 1000mm, max. roll weight: 1900kg, core inner diameter: 152mm/6inch. 2) Extruder Kiefel Worms 70.29D, power: 89kW, screw: 5-zone barrier screw, speed: 125rpm, renewed: 2010. 3) Adhesive extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone barrier screw, speed: 200rpm. 4) Center extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone core progressive screw, speed: 175rpm. 5) Adhesion promoting extruder Kiefel Worms 50.25D for the outer layer, power: 34kW, screw: 3-zone barrier screw, speed: 200rpm. 6) Kiefel Worms 80.25D outer layer extruder, power: 125kW, screw: 5-zone barrier screw, speed: 150rpm. 7) Reinhold SRK 200/9.6 film calibrating device. The entire line is controlled by a Plast Control system. Further components: integrated width measurement, C-scan for profile measurement, web center control, corona pre-treatment, film pre-draw. Including a replacement FSBK 5-layer blow head with IBC, replacement rollers, annular gap blower with filter, suction units, crane and external system terminal. Documentation available. On-site inspection is possible. Duedpfev T An Sjx Afpon

Condition: ready for operation (used), A 13-layer blown film line Kuhne for the production of biaxially oriented high-barrier films is available. Film thickness range: 20µm-80µm, max. film width: 1400mm, max. output capacity: 400kg/h, extruders: 13 units, max. die head pressure: 500bar, flex ring die: 250mm/300mm, calibration tools: 200mm/225mm/250mm/280mm/300mm, yield: 80%-90%. Laminating films: sealing layer thickness: 25µm-35µm, printing layer thickness: 25µm-45µm. Monofilms: shrink lid thickness: 23µm-28µm, AF lid film thickness: 25µm-45µm, top and bottom film thickness: 75µm, balloon film thickness: 25µm-31µm. Documentation available. An on-site inspection is possible. Dujdpew R Dh Eofx Afpsn

Condition: ready for operation (used), A total of 6 horizontal bag sealing machines Joke with vacuum and large container function are available. Seal length: 1000mm, sealing method: impulse sealing, sealing performance: 2x0.4mm, seam width: 6mm-8mm, rail opening: 30mm, throat depth: 153mm, machine dimensions X/Y/Z: approx. 1300mm/1100mm/1950mm. Documentation available. An on-site inspection is possible. Dedpfx Aew R U Atjfpsun

Year of construction: 2007, condition: ready for operation (used), Weight: 2t, an inspection is possible, with documentation. Dsderp E Nrjpfx Afpoun

Condition: used, Year of construction: 2004, A film sealing machine is for sale. Dsdpov Hx Nxefx Afpoun Type: KW 8060 Universal Year of manufacture: 2004 Machine number: RZ 05.04.105

Condition: new, Year of construction: 2025, Machine to close (seal with film onto the edge of bottles, glases, cans, etc.) container with a neck diameter of 30-90 mm. Working direction: from left to right. - Specifications: max. speed of the machine in neutral: 40 cycles/minute; 380V, 2.0kW; Machine dimensions: L1600xW800xH1160mm; weight: 180kg. Dodpfx Aov Nk Tbjfpjun Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Fully automatic and efficient packaging process realizable by AMTEC’s speed shrink Complete System 35M. That system includes: Shrink Wrapper speed shrink 35M (vertical), SHRINKtunnel-POF-M (high speed ), infeed and outfeed conveyors. Features and specifications of the shrink wrapper: M-version of vertically working L-bar shrink wrapper. The sealing unit uses 4 pillars to work vertically in a very stable way with very even pressure on the shrink film. Provides excellent sealing effect with minimized wrinkle effect. The sealing frame height and sealing stroke can be modified. Easy adjustable perforation location. Optional available: infeed systems for CD, DVD, etc. - Specifications: max. speed of the machine in neutral: 35 cycles/minute; packing sizes: (L + H) max. 500mm provided that H < 180mm and (W + H) max. 400mm provided that H < 180mm; length of sealing blades: horizontal = 623mm, vertical = 550mm; power: 220V/2.8kW; machine dimensions: L1850xW1350xH1300mm; weight: 800kg. - Specifications of the shrink tunnel: high speed shrinking with 0-20m/min for POF (Polyolefin) film; max. packaging size: W400xH250; tunnel size: L1500xW500xH300mm; power: 380V, max. 16kW; machine dimensions: L1800xW990xH1300mm; weight: 650kg. Dimensions of infeed and outfeed conveyors: L1000mmxW450mm each. Total dimensions LxWxH: approx. 5650x1350x1300mm. Dujdpfev Nl A Rjx Afpon Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Fully automatic and efficient packaging process realizable by AMTEC’s speed shrink Complete System 35L. That system includes: Shrink Wrapper speed shrink 35L (vertical), SHRINKtunnel-POF-L (high speed ), infeed and outfeed conveyors. Features and specifications of the shrink wrapper: L-version of vertically working L-bar shrink wrapper. The sealing unit uses 4 pillars to work vertically in a very stable way with very even pressure on the shrink film. Provides excellent sealing effect with minimized wrinkle effect. The sealing frame height and sealing stroke can be modified. Easy adjustable perforation location. Optional available: infeed systems for CD, DVD, etc. - Specifications: max. speed of the machine in neutral: 35 cycles/minute; packing sizes: (L + H) max. 600mm provided that H < 180mm and (W + H) max. 500mm provided that H < 180mm; length of sealing blades: horizontal = 703mm, vertical = 550mm; power: 220V/3.2kW; machine dimensions: L2015xW1470xH1300mm; weight: 850kg. Specifications of the shrink tunnel: high speed shrinking with 0-20 m/min for POF (Polyolefin) film; max. packaging size: W550xH250; tunnel size: L1500xW650xH300mm; power: 380V, max. 18kW; machine dimensions: L1800xW1140xH1300mm; weight: 700kg. Dimensions of infeed and outfeed conveyors: L1000mmxW600mm each. Total dimensions LxWxH: approx. 5815x1470x1300mm. Duodpfx Afov Nl Dbepen Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Fully automatic and efficient packaging process realizable by AMTEC’s speed shrink Complete System 35XL. That system includes: Shrink Wrapper speed shrink 35XL (vertical), SHRINKtunnel-POF-XL (high speed ), infeed and outfeed conveyors. Features and specifications of the shrink wrapper: XL-version of vertically working L-bar shrink wrapper. The sealing unit uses 4 pillars to work vertically in a very stable way with very even pressure on the shrink film. Provides excellent sealing effect with minimized wrinkle effect. The sealing frame height and sealing stroke can be modified. Easy adjustable perforation location. Optional available: infeed systems for CD, DVD, etc. - Specifications: max. speed of the machine in neutral: 35 cycles/minute; packing sizes: (L + H) max. 800mm provided that H < 180mm and (W + H) max. 650mm provided that H < 180mm; max. length of sealing blades: horizontal = 903mm, vertical = 750mm; power: 220V/3.5kW; machine dimensions: L2430xW1550xH1300mm; weight: 930kg. Specifications of the shrink tunnel: high speed shrinking with 0-20 m/min for POF (Polyolefin) film; max. packaging size: W700xH250; tunnel size: L1500xW800xH300mm; power: 380V, max. 20kW; machine dimensions: L1800xW1290xH1300mm; weight: 750kg. Dimensions of infeed and outfeed conveyors: L1000mmxW800mm each. Total dimensions LxWxH: approx. 6230x1550x1300mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Dsdev Nl Dhspfx Afpoun