Used Fine Mill for sale (2,407)

Condition: good (used), Year of construction: 1991, Electric chain hoist, crane, overhead crane, assembly crane, manual trolley, trolley, trolley drive, crane drive, crane travel, trolley Hfjdsx Tdwgjpfx Adwjb -Manufacturer: Abus, electric chain hoist -Type: GM Load capacity 250 kg -Main stroke: 10.0 m/min -Fine stroke: 2.5 m/min -Chain length: 3 m -Transport dimensions: 550/340/H350 mm -Weight: 33 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, operating hours: 712 h, Spider Lift Unic URW-547 For sale: UNIC URW-547C2E mini crawler crane with a dual power (diesel-electric) system, ideal for use indoors, in confined spaces, and outdoors. The machine is fully operational and in excellent technical condition—ready for immediate work. Technical specifications: Model: UNIC URW547C2E Year of manufacture: 2020 Operating hours: 712 m/h Drive: diesel-electric Maximum lifting capacity: 4 t Maximum working radius: 17.83 m Hfsdpfx Adjx Tzvtewjb Maximum lifting height: 18.2 m Overall machine width: 1.4 m – perfect for working in narrow passages Stable crawler undercarriage Precise control Suitable for indoor operation thanks to electric power supply Condition & additional information: The equipment is in continuous use and serviced regularly No hidden defects; all functions operate correctly Ready for immediate deployment Ideal for glass installation, construction, industrial, and assembly applications.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 10108, grinding wheel diameter: 100 mm, grinding length: 100 mm, center width: 100 mm, grinding spindle speed: 18,000 rpm, spindle speed (max.): 250 rpm, TECHNICAL DETAILS Grinding headstock Feed: X1 axes (CNC-controlled) Feed: Z1 axes (CNC-controlled) Grinding spindle (I) Feed: X2 axes (CNC-controlled) Feed: Z2 axes (CNC-controlled) Grinding spindle (II) Feed: X3 axes (CNC-controlled) Grinding spindle (I + II) Flange: Ø 52 mm Standard collar: Ø 32 mm Lubrication: permanent grease lubrication Bearing seal: with sealing air Set air pressure: see chapter 5.3.1 Drive: 12 kW Speed control: with frequency converter Max. speed: 18,000 rpm Hfodpfxswynhve Adwsb Balancing: electronic Grinding wheel (grinding spindle I + II) Type: Borazon (CBN) ceramic bonded Diameter: Ø 100 mm Bore: Ø 32 mm Grinding wheel coating width: max. 20 mm Circumferential speed: max. 125 m/s Cam piece Workpiece rotation diameter: max. 80 mm Clamping length: max. 100 mm Grinding length: max. 100 mm Workpiece weight: max. 0.5 kg Workpiece spindle Design: fixed with integrated infeed/outfeed movement Stroke: 50 mm Workpiece spindle Dimensions: Ø 210 x 700 mm Flange: Ø 180 mm Standard collar: Ø 127 mm Lubrication: oil lubrication Set air pressure: see chapter 5.3.1 Drive: with servo motor, C1 axis (CNC-controlled) Speed max.: 250 rpm Tailstock Longitudinal adjustment: manual via gear Tailstock quill Live center: mounting hole Ø 20 mm Clamping force: adjustable via pneumatics Dimensions: 50 x 80 x 178 mm Lubrication: permanent grease lubrication Bearing seal: with sealing air Set air pressure: see chapter 5.3.1 Grinding stock Design: fixed Steady rest Type: GR - 115 Diameter range: Ø 45 - Ø 60 mm Set air pressure: see chapter 5.3.1 Profiling of the grinding wheel Fine dressing: circumference and face with diamond wheel, mounted on the dressing spindle Circumferential dressing: Ø 110 mm Dressing spindle Dimensions: Ø 80 x 250 mm Flange: Ø 100 mm Standard collar: Ø 75 mm Lubrication: permanent grease lubrication Bearing seal: with sealing air Set air pressure: see chapter 5.3.1 Drive: 5.3 kW Speed control: with frequency converter Max. speed: 30,000 rpm MACHINE DETAILS Installation dimensions: 8,935 x 5,956 x 3,437 mm Weight: 24 t Connection power: 87 kVA

Condition: new, empty load weight: 2,980 kg, maximum load weight: 8,920 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, tire size: 245 / 70 R 17,5, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening during reverse tipping, side walls pendulum-mounted and foldable, side drop sides with spring relief, platform floor made of 4 mm fine-grained steel, 8 heavy-duty recessed lashing rings in the floor, 5-stage hard-chromed three-way tipping cylinder, tipping angle: 50 degrees to the rear, 45 degrees to the side, stepless height-adjustable drawbar, removable stakes at the rear, gear support winch with load and quick mode in front, integrated storage compartment for two aluminum loading ramps in the chassis, lockable ramp compartment (privacy cover), contour marking according to ECE R 048 regulation, vehicle with day registration, rental price from €550. Typing errors, mistakes and changes reserved, sample images. More data at: !, More details: ! Hodjx S N Axepfx Adwsfb

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with jointing unit, including DIA tools • Jointing capacity up to 40 mm • Workpiece thickness up to 3 mm • Combination milling station, radius R 2.5 mm Technical Description: - Hot melt adhesive application to the workpiece for edge materials up to 3 mm - Workpiece thickness up to 60 mm without jointing unit, up to 40 mm with jointing unit - Maintenance-free, coated gluepot - HF end-trimming unit (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with replaceable cutter heads (combination version) and fine adjustment from the operator side - Free spaces for additional processing units (Hebrock system) - Feed speed approx. 10 m/min - Cutting depth adjustment of the end-trimming saw - Signal lamp for workpiece flow - Robust chain feed - Ergonomically arranged control panel - Double roller upper pressure beam - Aggregate windows on machine rear and operator side - PLC control with touchscreen included Technical Data: - Feed rate: 10 m/min - Panel thickness: 8 – 40 mm - Weight: approx. 1550 kg (depending on configuration) - Dimensions (L x W x H): 5250 x 1445 x 1600 mm Airtronic incl. cooling and antistatic spray system (2014) • 1 pc hot air unit for visual zero joint using special edge materials • Including pneumatic gluepot positioning • Including cooling and antistatic spray system • Including 2 additional quick-change edge channels • Including special version corner rounding unit; max. workpiece thickness 60 mm, min. length 200 mm - Exclusively for Hebrock 3000 series edgebanders - Retrofitting possible at extra cost upon request Technical Data (special unit): Hfsdpfx Adox S Hmzeweb - Max. panel thickness: 40 mm - Edge thickness: 1.2 – 2.0 mm - Feed speed: 7 – 10 m/min - Air consumption: approx. 280 – 580 l/min (only Airtronic), electronically controlled - Ready for operation after approx. 2 min Upgrade to 8 mm edge thickness possible; max. workpiece thickness 40 mm • Including pneumatic saw adjustment (special version, min. workpiece thickness 8 mm) • 3-point pneumatic milling shift • Selector for radius/chamfer/flush for combination milling stations, eliminating manual changeover (PLC control required) Buffing station (swab): 1 pc Corner rounding unit: 1 pc incl. combination tooling and pneumatic radius/chamfer adjustment, max. 40 mm workpiece thickness, min. 300 mm workpiece length, Radius R 2.0 mm Radius scraper: 1 pc with pneumatic lift, Radius R 2.0 mm Flat scraper: 1 pc with pneumatic actuation Complete chassis: 1 pc Glue station quick-change system incl. glue discharge system (downward outlet in preparation), 1 pc (no second gluepot), machine can process PU adhesive Grooving unit (vertical for panel): 1 pc incl. pneumatic lift, vertical groove, groove width 8.2 mm, groove depth 8.0 mm, distance from panel edge 14.0 mm; special motor version with higher performance Extraction for internal jointing unit: 1 pc connected to machine's extraction manifold Corner rounding cutter ball bearings: 24.1 mm (1 pc), 24.2 mm (1 pc) Edge protection spray system: 1 pc for sensitive edge materials Combined spray system (separating and cleaning agent): 1 pc Location: Supplier stock

Condition: new, Year of construction: 2025, pressing force: 60 t, table width: 700 mm, table length: 700 mm, clearance between the columns: 700 mm, retraction force: 20 t, stroke length: 400 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH 60/20 TON FOUR-COLUMN HYDRAULIC DEEP DRAWING PRESS General Description The CRONOSSTECH 60/20 ton four-column hydraulic deep drawing press is a rigid and compact solution designed for precise metal forming, deep drawing, and metal spinning applications. Thanks to its four-column construction, the press maintains stable parallelism and perpendicularity tolerances throughout the pressing process. The frame is constructed from St52 grade steel and subjected to stress relieving via vibration. Ram and blank holder systems can be controlled independently; stroke and pressure settings are finely adjusted via a touchscreen panel. Equipped with REXROTH or PARKER hydraulic components, IE3 class motors, and an automatic lubrication system, it delivers long-lasting, safe, and efficient operation. The PLC-controlled system minimizes operator errors. This model is an ideal solution for small to medium scale metal spinning, deep drawing, die testing, and auxiliary pressing tasks. Hfedpfxsx N Ulge Adwsb Key Advantages - Rigid four-column press body - Independent stroke and tonnage control for ram and blank holder - System parameters can be set via touchscreen panel - High precision and repeatability - Low maintenance requirements and long service life Applications - Metal spinning operations - Deep drawing processes - Die testing and prototype production - Metalworking and auxiliary production lines ⚙️ STANDARD & TECHNICAL SPECIFICATIONS TYPE: Four-column FRAME MATERIAL: St52 – ERDEMIR COLUMN SHAFT DIAMETER: Ø 90 – 4 pcs. induction-hardened and chrome-plated shafts SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 60 Ton CAPACITY (BLANK HOLDER): 20 Ton DISTANCE BETWEEN COLUMNS: 700 × 700 mm PARALLELISM TOLERANCE: 120 micron/m PERPENDICULARITY TOLERANCE: 60 micron/m STROKE (RAM): 400 mm STROKE (BLANK HOLDER): 100 mm MIN. CLEARANCE: 100 mm MAX. CLEARANCE: 500 mm WELDING STRESS RELIEF: Vibratory stress relieving WELDING APPLICATION: WPQR and WPS certified by TÜRK-AK per EN ISO 15614-1:2017 (EN ISO 14731) MAX. OPERATING PRESSURE: 250 Bar TOTAL MOTOR POWER: 7.5 kW – IE3 MAIN PUMP: 22 cm³ – REXROTH or PARKER MOVING TABLE FAST DOWN SPEED: 150 mm/s MOVING TABLE DRAWING SPEED: 12 mm/s MOVING TABLE RETURN SPEED: 170 mm/s BLANK HOLDER TABLE FORWARD SPEED: 30 mm/s MAIN CYLINDER BORE: Ø 175 mm – Ck45 BLANK HOLDER CYLINDER BORE: Ø 100 mm – Ck45 AUXILIARY FAST ADVANCE CYLINDERS: 2 units APPROX. PRESS HEIGHT: 3100 mm APPROX. PRESS WIDTH: 1050 mm APPROX. PRESS DEPTH: 1050 mm DISTANCE FROM FLOOR TO LOWER TABLE: 1000 mm MAIN FILLING VALVE: NG 100 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION METHOD: Automatic (adjustable from panel) RAM / BLANK HOLDER STROKE & TONNAGE CONTROL: Adjustable from panel SYSTEM & PRESS STATUS MONITORING: On-screen display DIE MEMORY: Adjustable via panel LINEAR POSITION SENSOR: NOVATECHNIK or TURCK PLC: DELTA TOUCHSCREEN PANEL: DELTA 7” ELECTRICAL COMPONENTS: SIEMENS – SCHNEIDER APPROX. WEIGHT: 5 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: S20185, The DMK 20 C2 table cutter is NEW, UNUSED STOCK. Due to its compact, robust, and precise construction, it is the ideal table cutter for small to medium-sized meat processing companies, high-end gastronomy, as well as large kitchens and catering services. The well-thought-out design gives the user virtually unlimited application possibilities in all areas. The machine is equipped with two independently operated, powerful motors, allowing for versatile control. The optionally available robust, mobile base frame ensures the mobility you need. The net weight of 260 kg speaks for itself—an absolute professional-grade machine! A bargain for the expert! You will receive an invoice with VAT shown separately. Our used equipment service for you: Hfodpfsw N Ipkox Adwob • 6-month warranty on all electrical parts • High-quality branded appliances at fair prices • Professional overhaul/inspection & expert cleaning • Tested & fully functional—or your money back • Shipping or self-collection—flexible options • Competent advice—before and after purchase • Provision of operating manuals, wiring diagrams & spare parts • Inspection according to DGUV V3 Professional engineering in the tightest space: The DMK 20 C2 table cutter impresses with its extremely smooth and low-vibration operation, even at high speeds. The complex manufacturing of the individual components is carefully and precisely matched. The thick-walled, high-grade stainless steel cutting bowl offers extremely accurate concentricity, allowing the cutter knives to be set very close to the bowl radius. Applications: Machine specifications: • All stainless steel construction • Solid cast stainless steel bowl (bowl capacity: 20L) • High-precision, maintenance-free cutting unit • Stainless steel knife head with 6 knives • Tight cutting clearance in the bowl radius • High stability • Extremely low-vibration operation • Vibration-damping machine feet • Cutter lid made of Plexiglas • Analog, easily readable thermometer • 6 stainless steel knives, 7 stainless steel filler rings, two bowls Drive & control: • Separate knife shaft drive with electromagnetic brake • Brake release function via push button for cleaning with lid open • Separate bowl drive with directly flanged, maintenance-free gearbox • Two speeds, independently switchable • User-friendly, large push buttons with hygienic protective covers Safety features: • Spill guard according to UVV • Interlock guard according to UVV • Noise protection lid • Electromagnetic brake • EMERGENCY STOP function • Machine meets HACCP • Machine meets UVV • BG certified Technical data: • Bowl volume: 20L • Useful capacity for fine sausage meat (approx. kg): 16kg • Number of knives: 6 • Speed (rpm): 1500/3000 • Knife shaft power (kW): 3.3/4.5 • Mains voltage (V): 400 • Control voltage (V): 24 • Fuse protection (A): 16 (slow-blow) • Dimensions (W x D x H): 83cm x 80cm x 63cm • Weight: 260 kg Options: • Mobile base frame • Serial number: S20185 • Year of manufacture: 2022 • Type: DMK 20 C2 Condition: New

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, operating hours: 6,178 h, load capacity: 4,500 kg, lifting height: 4,500 mm, free lift: 2,100 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,000 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,350 mm, fork length: 1,500 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 200/50-10, rear tire type: superelastic tires (black), rear tire size: 27X10-12, overall weight: 10,600 kg, empty load weight: 6,100 kg, total height: 2,450 mm, total length: 2,500 mm, total width: 2,200 mm, color: red, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, -- USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS -- Years of experience | In-house service & paint shop | Professional consulting | Own transport | After-sales support Hjdpjx Td H Ujfx Adwjfb Looking for a forklift you can rely on? We are a reputable supplier of new and used forklifts with a long tradition in the market. We support customers all over Europe – from small businesses to large industrial operations. Our forklifts are not just machines – they are a guarantee that your logistics processes will be smooth and reliable. -- What makes us different? ✅ Every forklift undergoes a comprehensive technical inspection (full check-up, testing, oil & filter replacement, reconditioning of key components) ✅ UDT safety certification (available on request) ✅ Onsite paint shop and service workshop – machines refined both visually and technically ✅ European-wide transport handled by our own fleet and skilled drivers ✅ Operator training upon delivery + on-site operational test ✅ After-sales technical and service support – we are here beyond the purchase ✅ On-site viewing and functional testing available – you are welcome to visit us! ✅ Hundreds of satisfied customers across Europe – join those who trust us ✅ Financing support – we cooperate with most leading leasing companies ✅ Invoice available in EUR or PLN – as you prefer -- AVAILABLE NOW: COMBILIFT C4500 – Four-way forklift ✅ Year of manufacture: 2008 ✅ Operating hours: 6,178 h ✅ Power: LPG (GAS) ✅ Lifting capacity: 4,500 kg ✅ Mast: Duplex 4500 mm + free lift 2100 mm ✅ Fork positioner | Forks: 1500 mm ✅ Superelastic tyres – 100% condition ✅ Technical condition: Excellent – fully serviced ✅ Visual condition: Clean and rust-free, ready for work Dimensions: – Collapsed height: 2,450 mm – Overall length: 2,500 mm – Width: 2,200 mm – Positioner width: 1,350 mm – Overall height: 3,000 mm -- Perfect for: ✅ Narrow aisle warehouses ✅ Wood, steel and pipe industries ✅ Handling long loads ✅ Indoor and outdoor applications FT Logistics – Quality you can rely on. Service you can trust.

Condition: used, machine/vehicle number: 007906, undefinedPosition 2: Single Edgebanders HOMAG-PROFI KFL 350/10/A3/WZ Hedpfx Aowucm Ajdwsfb

Condition: new, empty load weight: 2,980 kg, maximum load weight: 10,020 kg, overall weight: 13,000 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: compressed air brake, Three-way tipper, body side panels hot-dip galvanized, loading height approx. 940 mm, front panel foldable for overloading, central locking system for side and rear boards, automatic rear board opening when tipping backwards, side panels can swing and be folded down, side panels with spring assistance, platform floor made of 4 mm fine-grained steel, 8 high-strength recessed lashing eyes in the floor, 5-stage hard-chromed three-way tipping cylinder, tipping angle: 50 degrees to the rear and 45 degrees to the side, continuously height-adjustable drawbar, removable rear stakes, gearbox-mounted support winch with load and quick modes at the front, integrated compartment in the chassis for two aluminum loading ramps, lockable ramp compartment (privacy protection), contour marking in accordance with ECE R 048 regulation, Rental price from €550, -- Errors, omissions and changes reserved, sample pictures --, More data at: !, More details: ! Hedjx S N Afepfx Adwefb

Condition: used, Year of construction: 2022, Serial number: 18xxxx Please contact ATS Norway for more information Please provide reference number upon request: 18854 Specifications: - 2022 model - Engine hours: 2112 hours - Crushing hours: 1696 hours - Remote control - 310 kW - 47000 Kg - Caution - High capacity - Transport cond - Service agreement with Pon - Light - Ready for delivery Description: Hfjdjvgxm Depfx Adwjb Is a solid intermediate crusher with visibility from the crusher. Where you can take out the gravel/fines. Can be driven directly after the coarse crusher or in front of the fine crusher/screening unit It has a large capacity. Ready for delivery Own weight: 47000 Total Weight: 47000 Kw: 310 Model: LokoTrack LT 220GP Konknuser m/ Forsikt

Condition: new, Year of construction: 2025, table width: 900 mm, table length: 1,800 mm, pressing force: 150 t, warranty duration: 24 months, stroke length: 200 mm, Equipment: safety light barrier, The eccentric press is a type of mechanical press, powered by a force generated via an eccentric mechanism, used in cold forming operations such as punching, cutting, and die forming. H-type (straight-side) eccentric presses, thanks to their rigid frames, provide high stability and process security, especially in applications requiring large tables and heavy dies. The CRONOSSTECH H-Type Eccentric Press 150 Ton is designed with a focus on stable operation in high-volume production, die protection, and operator safety. The monoblock frame, 8-way guided slide system, hydraulic overload safety, and automatic lubrication infrastructure ensure reliable performance suitable for continuous production conditions. Key Advantages - Stable operation with large table dimensions for oversized dies - Die/equipment protection with hydraulic overload safety - Precise guidance via 8-way slide + counterbalance piston - Controlled, user-friendly operation via PLC and touch screen - High operator safety with light curtain protection system Areas of Application - Punching/cutting/forming processes requiring large tables - Serial production with automatic feeding lines - Heavy die and high tonnage production processes ✅ STANDARD FEATURES • Steel construction frame • Pneumatic clutch-brake • Additional T-slotted bolster plate • 8-way guided slide • Adjustable stroke on single connecting rod • Counterbalance piston on slide • Full automatic fine lubrication system • PLC control system • Piano-type control panel • Touch LCD screen • Motor reverse function • Hydraulic overload safety Hfjdpfxox N Ru De Adwob • Motorized slide adjustment mechanism • Light curtain protection system • Enclosed oil gear unit • Dual-coil safety valve • CE conformity ✅ OPTIONAL FEATURES • Press feeding systems • Scrap removal systems • Sliding safety cover in front of the table • Dies custom-built to specifications ✅ TECHNICAL SPECIFICATIONS (H-TYPE – 150 TON) Capacity: 150 Ton Usable area of lower table: 900×1800 mm Usable area of upper table: 900×1800 mm Stroke: 200 mm (fixed) Nominal material thickness: 7 mm Speed (SPM): 60 Max. closed die height: 500 mm Min. closed die height: 380 mm Adjustment (slide): 120 mm Number of connecting rods: 2 Number of eccentric (crank) shafts: 2 Safety system: Hydraulic Electrical components (control panel): Siemens – Schneider Lubrication system: Automatic Screen / PLC / Inverter: Siemens – Pilz Safety barrier: Leuze Operation mode: 4-position Die memory: 99 sets Mounting: Floor standing Frame type: Monoblock Motor power: 22 kW Motor speed (RPM): 1450 Approximate machine dimensions (L×W×D): 4500×3000×2000 mm Approximate weight: 20 Ton Note: Please contact us if you require changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales services are managed by CRONOSSTECH.

Condition: new, Year of construction: 2025, The innovative circular saw is a combination of a powerful, precise, universal and compact device. It was created for small carpentry workshops, furniture manufacturers and craftsmen. This machine uses many solutions usually used in more expensive devices of this type. The excellent price-performance ratio has been achieved without compromising on quality or versatility. Machine description Hsdsvxhm Dspfx Adwjfb The TS 315 industrial circular saw for solid wood is an innovative combination of a powerful, precise, universal and compact machine! It was created for carpentry workshops, hobbyists, furniture manufacturers and craftsmen This machine uses many solutions used in much more expensive machines of this type! Excellent price-performance ratio has been achieved without compromising on quality or versatility! The machine is also used to process high-density boards, MDF boards, ABS panels, PVC, solid wood and other materials based on wood or with a similar structure and hardness. Smooth and precise adjustment of height and angle using a knob Stable, heavy, high-quality machine body. Broadening and extending the table allows for comfortable work. Smooth aluminum reinforced sliding table. Precision parallel stop with fine adjustment. Sturdy telescopic arm and extendable extension table Large drive motor guarantees consistent cutting speed, even at a cutting height of 100 mm Technical parameters Shield dimensions 315x30x3.2mm Dial rotation 4250rpm Max. cutting height 90/45 degrees 100/75mm Max. cutting width on the guide 940mm Workbench dimensions 800 x 365mm Table extension 760 x 600mm Expanding the table 500 x 350mm Sliding table 1600 x 238mm Suction port diameter 100mm Motor power 2.8kW Supply voltage 400V Weight 245 kg Machine dimensions 1540 x 2400 x 1300mm

Condition: new, empty load weight: 3,140 kg, maximum load weight: 7,360 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, tire size: 245 / 70 R 17,5, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side walls swinging and foldable, side drop sides with spring assistance, platform floor made of 4 mm fine-grain steel, 8 strong lashing eyes recessed into the floor, 5-stage hard-chromed three-way tipping cylinder, tipping angle: 50 degrees to the rear and 45 degrees to the sides, continuously height-adjustable draw tube, removable rear stakes, gearbox support winch with load and high-speed mode at front, integrated receiver compartment for two aluminum loading ramps in chassis, lockable ramp compartment (privacy protection), contour marking according to ECE R 048 regulation, vehicle with day registration, -- Subject to misprints, errors and changes, sample images --, More data at: !, More details: ! Hjdpfxex Sxt He Adwefb

Condition: used, Year of construction: 1985, Please contact ATS Norway for more information Please provide reference number upon request: 18856 Hfjdevgybpepfx Adweb Specifications: 1985 model Complete unit Control cabinet Motor 3 conveyors Small screen Ready for delivery Description:Used cubicator for sale, sold complete with motor, control cabinet, 3 conveyors, and small screen.Currently configured for cubical shaping of crushed rock (gravel/fines), but can be adapted for other applications.In working condition and ready for transport. Own weight: 10000 Model: BN 150 kubisator

Condition: new, Year of construction: 2025, table width: 1,000 mm, table length: 2,000 mm, pressing force: 200 t, warranty duration: 24 months, stroke length: 200 mm, Equipment: safety light barrier, Eccentric presses are mechanical press types operated by force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and stamping. H-type (straight-side) eccentric presses provide high stability and process safety for large table and heavy die applications, thanks to their rigid frame construction. CRONOSSTECH CEHP 200 – H-Type Eccentric Press 200 Ton is designed for stable operation in high-volume production, focusing on die protection and operator safety. Featuring a monoblock frame, 8-guided ram system, hydraulic overload safety, and automatic lubrication infrastructure, it delivers reliable performance suitable for continuous production conditions. Key Advantages - Stable operation with large dies thanks to a 1000×2000 mm large table - Die/equipment protection with hydraulic overload safety - Controlled and user-friendly operation via PLC + touchscreen - High operator safety with light curtain protection (LEUZE) - Fast production change-over with 99 die memory settings Hsdpfx Asx N Ruqsdwjfb Areas of Application - Punching/cutting/forming applications requiring a large table - Serial production with automated feeding lines - Heavy-duty dies and high-tonnage production processes ✅ STANDARD FEATURES • Steel construction frame • Pneumatic clutch–brake • Additional bolted T-slotted plate • 8-guided ram • Adjustable stroke on single connecting rod • Balancer piston on ram • Fully automatic fine lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Motor reverse motion • Hydraulic overload safety device • Motorized ram adjustment mechanism • Light curtain protection • Enclosed oil reservoir with gear set • Double-coil safety valve • Compliance with CE standards ✅ OPTIONAL FEATURES • Press feeding systems • Scrap material discharge systems • Sliding safety door at table front • Dies with custom specifications ✅ TECHNICAL SPECIFICATIONS (CEHP 200 – 200 TON) Capacity: 200 Ton (CEHP 200) Lower table usable area: 1000×2000 mm Upper table usable area: 1000×2000 mm Stroke length (fixed): 200 mm Nominal material thickness: 7 mm Strokes per minute (SPM): 25–45 Max. shut height: 600 mm Min. shut height: 480 mm Side window dimensions: 600×600 mm Adjustment (ram adjustment): 120 mm Number of connecting rods: 2 pcs Number of eccentric shafts (cranks): 2 pcs Safety device: Hydraulic Switchgear brands: Siemens – Schneider Lubrication system: Automatic Display / PLC / Inverter: Siemens – Pilz Safety barrier: Leuze Operation mode: 4-position Die memory: 99 settings Mounting type: Floor standing Body type: Monoblock Motor power: 22 kW (IE3) Motor speed (RPM): 1450 Approx. machine dimensions (L×W×D): 4600×3000×2000 mm Approximate weight: 28,000 kg Note: Please let us know if you require changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and aftersales processes are managed by CRONOSSTECH.

Condition: new, Year of construction: 2025, The WRHS2016R mast truck is an indispensable tool in any warehouse, distribution center, or during loading and unloading operations of pallets in delivery vehicles. With a lifting capacity of up to 2000 kg and a lifting height of up to 1600 mm, this mast truck enables efficient and safe handling of heavy loads. Thanks to its advanced technology, solid construction, and high-quality components, it ensures long-term and trouble-free operation. Construction and Technology of the WRHS2016 Mast Truck The WRHS2016 truck has been designed for intensive use in demanding warehouse environments. Its robust construction made of durable materials guarantees long-lasting operation. The use of advanced hydraulics allows for precise fork control, while polyurethane wheels and rollers ensure stability on uneven surfaces—an essential requirement in warehouses and distribution centers. Hydraulic Pump – The hydraulic system ensures smooth and precise lowering of the forks, which is especially important when handling heavy loads. This technology provides the operator with full control over the lifting and lowering processes. Wheels and Rollers – Polyurethane wheels (180 × 50 mm) and fork rollers (74 × 70 mm) offer high resistance to mechanical damage and abrasion, extending the lifespan of the equipment. Additionally, their low rolling resistance makes the truck easy to maneuver, improving operational efficiency and saving energy. Precision and Work Efficiency The WRHS2016 truck is distinguished by its high precision when lifting and lowering loads, ensuring safety and efficiency in everyday operations. With an adjustable fork width and a high lifting range, it is ideal for transporting pallets of various sizes and weights. The mast truck performs exceptionally well in confined areas, making it suitable even for warehouses with limited workspace. Efficiency – Thanks to modern technology, the truck allows fast goods transport, saving time in warehouse and loading operations. The high precision of the hydraulic mechanisms ensures effective load handling in various conditions, regardless of weight or shape. Standard Equipment Lifting capacity: 2000 kg Lifting height: 1600 mm Polyurethane wheels: Guarantee quiet and stable operation on uneven surfaces Hydraulic pump: Ensures precise fork lowering Rounded fork tips: Facilitate entry under pallets Steering handle: Rubber-coated, ergonomic, and comfortable to use Hfedpfjricghsx Adwjb Foot parking brake: Ensures safety on both wheels Technical Specifications Parameter Value Lifting capacity 2000 kg Lifting height 1600 mm Fork dimensions (L × W) 1150 × 145 mm External fork width 330 – 735 mm Height with lowered forks 2090 mm Height with raised forks 2090 mm Minimum fork height 85 mm Overall length 1740 mm Overall width 890 mm Turning radius 1400 mm Steering wheels 180 × 50 mm Fork rollers 74 × 70 mm Weight 290 kg

Condition: used, Year of construction: 2019, operating hours: 11,169 h, Serial number: 18xxxx Please contact ATS Norway for more information Please provide reference number upon request: 18852 Specifications: Year: 2019 Hours: approx. 11,200 Weight: ~49,000 kg Power: 310 kW Full service history (Pon Equipment) Fine cone crusher Integrated screening unit Includes screen meshes Output fractions: 0–4 mm, 4–8 mm, 8–16 mm Large feed hopper with conveyor Lights Ready for delivery Description:High-capacity Metso LT220D cone crusher with integrated screen.Compact, mobile and easy to set up – takes approx. 30 minutes after transport.Can handle: 0–160 mm material through the screen Hfodpfxovg A D Tj Adwsb 32–160 mm material directly into the crusher Well-maintained through service agreement with Pon.Includes several screen meshes and spare parts.Ready for immediate delivery. Hours: 11169 Own weight: 49000 Total Weight: 49000 Kw: 310 Model: Lokotrack LT220D Finknuser m/ sikt, matekasse og transportbånd

Condition: new, Year of construction: 2025, Professional, very powerful and efficient band saw for metal with 45° swivel arm. The perfect solution for ironwork, production and craft workshops. Unparalleled for many years, the design and solid construction make it a perfect solution. Machine description Professional, very powerful and efficient metal band saw with 45° swivel arm, CORMAK BS 712 SW is based on refined solutions making it unrivaled in its class. Arm made of shaped spheroidal cast iron ensures rigidity during operation and absorbs all vibrations. Control panel is located on the arm of the cutter. It features high efficiency and simple handling. Provides cutting in vertical plane and in the plane perpendicular to the axis of the cut material, or at any angle in 45° – 90° range. Element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Suitable speed of arm lowering is obtained thanks to the valve controlling oil flow between hydraulic cylinder chambers. Rugged, stable and refined construction as well as the arm made of uniform cast iron provide high rigidity and stability while cutting, ensuring accuracy and long-term reliability. The design of the 20 mm saw blade used in the machine makes it possible to cut large quantities of elements. Required band linear velocity is obtained by changing the ratio on the belt pulley between the worm gear and the driving motor. Technical data Motor power 1.1 kW Band speeds 22/33/45/65 m/min Power supply 400V Band dimensions 2360×20×0.9 mm Cutting range 45°L – 45°R Weight 145 kg Dimensions 1280x575x1140 mm Angle 0°.....Ø 205.....215×205.....205×205 45° L.....Ø 150.....100×200.....130×130 Hedpjw U Skvsfx Adwsfb 45° R.....Ø 140.....140×90.....90×90 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2025, Thanks to the many years of experience of our CORMAK team, radial fans from the FAN series have been developed. The most powerful centrifugal fan FAN7,5 reaches a capacity of up to 10562 m3/h. The radial fan has been developed for use in the carpentry, furniture, automotive, agricultural and manufacturing industries. Product characteristics: Hsdpfxsvugrdj Adwjfb The Radial Fan can transport air whirl sawdust dust and other substances such as smoke or harmless gases. It is widely used for ventilation in industrial lumber companies, carpentry, mining, large buildings, hotels, restaurants, etc. Thanks to its construction and reinforced balanced impeller with many blades, it guarantees stable, quiet and vibration-free operation. The high efficiency of the fan due to the suitable shape of the blades significantly reduces the consumption of electricity without changing its high performance. APPLICATION OF THE FAN production of various types of materials transport to dehumidifiers and drying systems. carpentry - transport of chips, sawdust, dust agricultural industry - transport of fine granulates, manufacturing - transport of polystyrene granulates, etc. automotive industry - transport of dusty air, impurities Technical parameters: MAX. AIR CAPACITY max. 10562 m3/h inlet diameter 340 mm outlet diameter 350 mm PRESSURE 2554 - 1673 Pa DIMENSIONS 810x900x980 mm MOTOR POWER / VOLTAGE 7.5 kW WEIGHT 125 kg

Condition: new, functionality: fully functional, Year of construction: 2025, CORMAK DC2200 Model The CORMAK DC2200 is a powerful and robust cyclone dust extractor, designed to efficiently purify the air in woodworking shops, furniture factories, and metalworking facilities. Thanks to its cyclone separator, high-performance radial fan, and modern filtration system, the machine ensures effective particle separation and long-term high efficiency. Main Advantages of the CORMAK DC2200 High extraction capacity – up to 2800 m³/h – effective removal of dust and shavings from multiple workstations simultaneously Cyclone separator – separates larger particles before the filter, extending its service life Powerful 2.2 kW (2200 W / 50 Hz) motor – stable and reliable continuous operation Large 151-liter metal container – convenient and safe waste collection Filtration area of 4.8 m² – ensures high efficiency in capturing fine dust particles Compact, mobile design – sturdy frame with transport wheels for easy movement Quiet operation – optimized fan design reduces noise without sacrificing performance Design and Technology The CORMAK DC2200 is equipped with a 365 mm radial fan, generating a maximum static pressure of 2220 Pa. This allows efficient air suction through long ducting systems and multiple workstations. The extractor offers three suction inlets (3 × Ø100 mm) and one main inlet (Ø200 mm) for flexible setup according to the production area layout. The cyclone separation system effectively removes heavier particles at the inlet, directing only pre-cleaned air to the container. The cylindrical filter (Ø370 × 612 mm) ensures consistent airflow even during intensive operation. Performance and Ergonomics The DC2200 extractor is designed for daily use in small and medium-sized workshops. The 151-liter container (Ø620 × 570 mm) provides long working cycles without frequent emptying. With its compact dimensions (1320 × 900 × 1840 mm) and lightweight design (136 kg net), the unit fits easily into any workspace. Hjdexrdhaspfx Adwsfb Applications The CORMAK DC2200 is ideal for use in: Carpentry and furniture workshops Sawmills and wood-processing facilities Model-making and metalworking shops Production of composite and MDF components Standard Equipment Cyclone separator Cylindrical filter with large filtration surface 151 L metal container for dust and shavings Transport wheels Suction inlets: Ø200 mm and 3 × Ø100 mm Technical Specifications Parameter Specification Motor power 2.2 kW / 50 Hz Airflow (without filter) 2800 m³/h Max. static pressure 2220 Pa Fan diameter 365 mm Inlet diameter 1 × Ø200 mm / 3 × Ø100 mm Container volume 151 L Container dimensions Ø620 × 570 mm Filter surface area 4.8 m² Filter dimensions Ø370 × 612 mm Overall dimensions (L × W × H) 1320 × 900 × 1840 mm Weight (net / gross) 136 / 170 kg

Condition: new, Year of construction: 2025, Invest in modernity and versatility with the ZX 7055 DRO milling and drilling machine, ideal for small to medium-sized repair and production departments. This medium-sized machine not only offers an auto-feed with vertical head, but also threading functions and digital readout as standard. Product characteristics standard readout. Discover its reliable features that make the ZX 7055 DRO an excellent choice for your workshop: Heavy Stable Cast Iron: The solid construction in heavy cast iron is the foundation for durability and precision. The ZX 7055 DRO milling/drilling machine maintains stability even during the most demanding tasks. Automatic feed: Save time and increase productivity with the automatic feed. The motorised vertical head allows efficient machining of materials without the need for constant supervision. Solid Cross Table with Precision Ground Surface: Attention to detail is a key element of the design. The solid cross table with a precision-ground surface ensures excellent flatness, which will translate into precise machining. Swallow Tail Slides: Innovative dovetail-shaped guides guarantee smooth and precise movement in three axes. Achieve perfect results without compromise. Quiet Operation Thanks to Ground Gear Wheels: Focus on the work, not the noise. The ground gears make the router-drill run quietly for a comfortable working environment. Left and Right Rotation: Adapt the machine to your needs. The ability to rotate both ways gives you extra flexibility in the machining process. Head Rotation +/- 90° and Adjustable Head Height: Adapt to different tasks with +/- 90° head rotation and adjustable head height. Achieve precise results in all conditions. The ZX 7055 DRO milling/drilling machine is a state-of-the-art tool that will redefine your material processing experience. Order today and experience exceptional performance in your workshop! MAXIMUM FACE MILLING CUTTER DIAMETER 80 mm MAXIMUM END MILL DIAMETER 32 mm HEAD ROTATION ANGLE +/- 90° SPINDLE ROTATION 75, 180, 280, 600, 1000, 1600 rpm SPINDLE FEED RATES 0,1; 0,18; 0,26 rpm MANDREL HANDLE MK4 SPINDLE PITCH 125 mm (automatic feed) Hfodpfsud H Thsx Adweb WORKING TABLE DIMENSIONS 1000 x 240 mm TRAVERSE TABLE X/Y 670 x 185 mm WIDTH/SPACING/NUMBER OF T-SLOTS 18 mm/80 mm/3 DISTANCE FROM SPINDLE TO TABLE 90 - 460 mm DISTANCE FROM SPINDLE TO COLUMN 235 mm MOTOR POWER 1,5 kW / 2,1 hp POWER SUPPLY 400 V WEIGHT 425 kg PACKING DIMENSIONS 970 x 760 x 1160 mm Standard equipment spindle auto-feed digital readout longitudinal auto-feed of table with speed adjustment height adjustment of headstock with electric motor cooling system

Condition: new, functionality: fully functional, Year of construction: 2025, CORMAK MM3166P Wide Belt Sander – Durable and Reliable for Workshop or Professional Use The CORMAK MM3166P wide belt sander is a robust and dependable machine, ideal for both home workshops and professional woodworking environments. With its advanced features and solid technical specifications, it enables fast, accurate sanding of wood materials, delivering a perfect finish on every project. Key Features: Dual sanding drums ensure even and precise sanding across the workpiece. Conveyor belt system facilitates smooth material feed and consistent sanding results. Powerful motor (2200 W + 120 W) guarantees effective sanding, even on harder materials. Adjustable sanding belt speed allows you to match the speed to the type of material being processed. Dust extraction system ensures a cleaner working environment and protects the operator from inhaling fine dust. Sturdy construction guarantees long-term durability and operational stability. Wide sanding belt (635 mm) enables fast processing of large surface areas. Material thickness capacity: Min. 7 mm, Max. 125 mm. Sanding drum diameter: 150 mm. Sanding belt speed: 14 m/s. Two dust extraction ports (100 mm diameter) for easy connection to dust extraction systems. Technical Specifications: Parameter Value Belt length 800 mm Belt width 635 mm Roller radius R 120 Max. workpiece thickness 130 mm Main motor power 2.2 kW Voltage 230 V Frequency 50 Hz Motor speed (at 220 V) 1800 RPM Feed motor power 120 W Feed speed 1.8 – 7.3 m/min Dust port diameter 100 mm (x2) Net / Gross weight 220 / 260 kg Machine height 1113 mm Machine width (side view) 1100 mm Hsdpfx Ajxfhn Djdwjfb Machine width (top view) 1060 mm Drum length 635 mm Manufacturer: Cormak

Condition: new, Year of construction: 2025, LUFT 1500 COMPACT Screw Compressor with Refrigerated Air Dryer The LUFT series screw compressor by the Polish brand Cormak represents the latest innovations in pneumatics, combined with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. Key Features of the Screw Modules in CORMAK Compressors: Modern Technology and Efficiency The screw modules ensure excellent performance and outstanding energy efficiency. Their design focuses on maximizing output while minimizing energy consumption. Precision and Control Thanks to advanced engineering solutions, the screw modules allow for precise control of the compressed air generation process. This translates into stable pressure and optimal operation of the entire pneumatic system. Durability and Reliability The screw modules used in CORMAK compressors are built for longevity. Their sturdy construction and use of high-grade materials ensure reliability even under harsh industrial conditions, minimizing downtime and the need for frequent repairs. Integrated Refrigerated Air Dryer – Top-Level Air Quality Two-Stage Drying System Effectively removes moisture and protects the pneumatic system. Variable-Speed Fan Automatically adjusts cooling capacity according to operating conditions, resulting in energy savings. Dual Filtration System Hedjxnk Acspfx Adwsfb A pre-filter with 3.0 µm accuracy removes larger solid contaminants. A precision filter with 0.1 µm accuracy captures fine oil particles (aerosols) and other impurities, ensuring ultra-clean air. Technical Specifications: Parameter Value Motor Power 11 kW Voltage 400V / 50Hz Output (0–6 bar) 1620 L/min Output at 6 bar 1580 L/min Output at 8 bar 1350 L/min Output at 10 bar 1230 L/min Outlet Connection Diameter (G) 1" Dimensions 1550 x 740 x 1150 mm Weight 500 kg Manufacturer: CORMAK

Condition: new, Year of construction: 2025, CORMAK SM150D Belt Grinder The CORMAK SM150D belt grinder is an industrial machine designed for intensive operation in production plants, locksmith workshops, and tool rooms. It is a metal belt grinder that combines high grinding efficiency with an effective dust extraction system, ensuring safety, cleanliness, and comfort in everyday use. Its solid steel construction and large worktable surface guarantee stability and precision, even when processing large components. Main Advantages Two belt speeds (14.5 / 29 m/s) – allows adjustment of speed to the type of material and nature of work (coarse or finishing grinding). Integrated dust extraction system – ensures a clean and safe working environment without the need for external dust collection units. Stable steel construction – effectively reduces vibrations, improving repeatability and machining quality. Large worktable (480 × 150 mm) – allows comfortable handling of larger workpieces. Stepless grinding angle adjustment – enables precise positioning of the belt relative to the workpiece. Quick belt change system – minimizes downtime and improves work efficiency. Design and Technology The stationary CORMAK SM150D grinder is built on a welded steel frame, ensuring rigidity and resistance to dynamic loads. The integrated extraction system provides highly efficient removal of dust and grinding debris. A 2.8 kW motor delivers sufficient power for demanding machining tasks. Precision and Efficiency Thanks to the use of a 150 mm wide and 2000 mm long belt, the machine provides a large contact surface, reducing processing time and increasing efficiency. The two belt speeds allow for a quick switch from aggressive material removal to fine surface finishing. The ergonomic design and spring-loaded belt tensioning system ensure proper belt tension throughout the work cycle. Applications The CORMAK SM150D metal belt grinder is suitable for use in: production plants working with steel, stainless steel, and aluminum, welding and locksmith workshops, surface preparation and finishing departments, grinding edges, welds, and flat surfaces. Standard Equipment Hfodoxrzgtopfx Adwob Stable steel base with tilt adjustment Grinding belt 2000 × 150 mm Built-in dust extraction system with bag and Ø100 mm ports Spark and dust protection cover Adjustable protective shield Technical Specifications Parameter Specification Abrasive belt dimensions (L × W) 2000 × 150 mm Belt speed 14.5 / 29 m/s Motor speed 1400 / 2800 rpm Motor power 2.8 kW Machine dimensions (L × W × H) 700 × 540 × 1130 mm Weight 90 kg Power supply 400 V Extraction port diameter 2 × Ø100 mm Worktable dimensions 480 × 150 mm Chip bag diameter Ø100 mm Chip bag length 500 mm