Used Finger Jointing for sale (1,963)

Condition: good (used), Finger jointing line Grecon infeed cross buffer with packet formation 2 milling machines connected 600 mm table width Ncedpfxsh I Dufe Aqvst each milling machine with glue rollers - automatic transfer - press pass endless - cross cut saw - outfeed roller conveyor with cross feed input length 500 - 4000 mm Plant is dismantled and available at short notice Control is defective new control with program included not installed, program not tested

Year of construction: 2007, condition: reconditioned (used), Fully automatic finger jointing line: Type Doppel-Pack Machine is dismantled Machine is overhauled specification: Wood entrance length: min. 150 mm max. 1000 mm average 400 mm Wood cross section: min. 20 x 40 mm max. 80 x 180 Wood exit length: 6030 mm Max. Wood cross section with 10 mm tine size: hardwood 120 cm² softwood 150 cm² Tine design vertical and horizontal Leimart. PVAC white glue, 2-sided glue application Electric power: Supply voltage: 400 V Control voltage: 24 V 50 Hz Plant completely wired up to the control cabinet. Tine length / possibly wood cross section and type of glue can still be adjusted capacity: 6 milling tables/min working height: 960mm table width: 600 mm Glue application: double-sided application Technical parameters: Nodpfsd Tipasx Aqvsct Input material: Input length of parts (min. - max.): 150-1000mm Part width (min - max): 40-155 Part thickness (min - max): 20-80mm Working height : 960mm bundle width: 600mm Glue application: double-sided application (on both sides of the

Year of construction: 2002, condition: reconditioned (used), Fully automatic finger jointing line: Type Doppel-Pack with automatic feeding Ncjdpfsg D Ugkex Aqvst With multiple crosscut saw With automatic stacking machine Specification: Wood input length: min. 150 mm max. 1000 mm average 400 mm wood cross-section: min. 20 x 40 mm max. 80 x 180 Wood exit length: 6030 mm max. Wood cross section with 10 mm tine size: Hardwood 120 cm² softwood 150 cm² Tine design vertical and horizontal Glue type. PVAC white glue, 2-sided glue application Electric power: Supply voltage: 400 V Control voltage: 24 V 50 Hz System completely wired up to the control cabinet. Tine length / possibly wood cross-section and glue type can still be adapted. Capacity: 6 milling tables/ min working height: 960mm table width: 600 mm glue application: double-sided application Technical parameters: Input material: Input length of parts (min. - max.): 150-1000mm Part width (min. - max.): 40-155 Part thickness (min. - max.): 20-80mm Working height : 960mm Bundle width: 600mm Glue application: double-sided application (on both sides of the

Year of construction: 2020, condition: new, Finger jointing line Huckle Nsdpfx Aqofhkvljvect

Condition: used, Price on request. Comprising: Minda grading line for stack and lamella dimensions Stack width: max. 1,200 mm Stack height: max. 1,200 mm Stack length: 2,000–5,000 mm Stack weight: max. 3 t Lamella width: 80–260 mm Lamella thickness: 23–80 mm (typically 46 mm in the rack) Cross-section: max. 80 x 260 mm = 208 cm² Performance of vacuum stacking with lifting column: Section I: 3 layers/min Section II: 2 layers/min Nodpfx Aqswwg Amsvect Finger jointing by Grecon Destacking, planing line and cross transfer platforms by Minda

Condition: used, Mini finger joint cutter Mini finger joint cutter head Finger joint cutter 100 different pieces in stock Finger joint cutters mini finger joint cutter finger joint milling tool milling cutter finger joint Ncodpfxorr Upho Aqvot

Condition: used, functionality: fully functional, Dosing and application system Hydrotop 1 E400R + Ecotac_C for single-sided 1K PUR comb gluing for package finger jointing line. Glue application for finger joints. Adhesive application for finger joints. Very good condition. Nsdpfx Aqsul Shnovsct

Condition: used, functionality: fully functional, pressing force: 200 t, table width: 300 mm, cutting height with scoring (max.): 100 mm, milling spindle length: 250 mm, Equipment: 1 GRECON feed transfer with accumulation of 4 to 5 cleaned lamellas of different lengths for finger-jointing Ncedjwz H Anspfx Aqvst 1 GRECON double finger-jointer for deep teeth (for glulam beam production) 1 180° transfer with two-component gluing system 1 GRECON finger-jointing press 1 CNC-controlled cross-cut saw 1 outfeed table

Condition: new, Year of construction: 2026, pressing force: 25 t, Equipment: double-sided, The Marinus Powermax Finger Jointer Line profiles horizontally, applies adhesive, cuts out defects, presses and cuts to length. The unique process creates a clean joint that does not require post-processing. About the Finger Jointer When feeding wood into the machine, it is possible to mark defects, such as knots or cracks, with a luminescent crayon. The machine will cut out these defects, including the crayon lines. For instance, to get cladding or paneling without knots or holes. Before the profiling and also before the pressing, the wood is brought to a stationary position, fixed sideways and clamped to an accurate reference surface above. This results in a highly accurate connection of the finger joint, with a flat surface at the joint and a straight end-product. Because of this precision (for most purposes) the wood does not need to be planed or sanded afterwards. The adhesive applicator is mounted to the carriage with the profile cutters. In the returning stroke of the profiling carriage the adhesive is applied. The use of PU adhesive ensures a very strong bond, suitable for outdoor use and in wet environments. While most other finger jointers move the wood transversely (right-angled) past the profiling heads, the Marinus Finger Jointer moves the wood longitudinally (lengthwise) through the machine. This enables feeding in long lengths of 6 meters or even longer. As a result, the machine can process all the wood, including longer lengths, and use it all (except for the defects) for the jointed end-product. This way, there is no good wood turned into short pieces of scrap. Where other finger jointers focus on re-using short pieces of scrap wood, the Marinus eliminates the production of scrap wood. The Marinus Finger Jointer contributes to an efficient and sustainable production process. Specifications: Ncsdpfx Aqep R Iwhevst Infeed Lenghts: 450 - 6000+ mm Infeed Widths: 50 - 300 mm Infeed Thicknesses: 8 - 50 mm Length modes: Variable / Fixed Capacity: Up to 8 joints/min This machinery is engineered and built in our company in The Netherlands and will be delivered new from our factory. This machinery is equipped with an online remote support system. We provide customer support worldwide. This listing on Machineseeker is also made by us: Marinus Machinery.

Condition: good (used), Schmedt PraForm 21-50 joint-setting press Book press with a joint forming. Nodey S Edropfx Aqvoct Production Schmedt, Germany. The machine is in very good condition, ready for production. Technical data: max format: 450 x 520 x 100 mm Weight 264kg Power supply 230V + compressed air.

Condition: used, Year of construction: 2015, functionality: fully functional, Machines connected in one line (all three machines are only sold together): Nodey Tpb Repfx Aqvsct 1. Veneer cross-jointing machine FURNIMASTER FZR-21 2. Direct unloading device DA-12R 3. Scissor lift INCLUDED Veneer specifications Veneer strip length (grain direction) 350 - 2100 mm Veneer strip width (cross grain) 50 - 500 mm Veneer strip thickness 0,3 - 1,5 mm Power data Maximum nominal output / machine cycles 30 cycles/min. Average production speed 17 - 20 cycles/min. Connection data (Basic machine) Connection power 9 kW Compressed air 6 bar Power consumption Electric energy 6,2 kWh Compressed air 15 NL/min. Dimensions and weight (Basic machine) Length 3500 mm Width 1500 mm Height 1530 mm Working table height 930 mm (+50/-0 mm) Net weight, approx. 2500 kg

Condition: excellent (used), Number of knives Z2 V2 width 17 mm circle diameter 160 mm material Stahl WP Bore diameter 40 mm Jointing rebate cutter Weinig type 530 160 for use on the planing spindle of Weinig planing machines. Ncodpfsy Apf Ujx Aqvst

Condition: used, Bore: 30 mm Swing diameter (ø): 100 mm Designation: MEC Ncedpfjwu Nypex Aqvet Length: 55 mm Material: steel Knife: Reversible knife Z6

Condition: used, Bore: 40 mm Swing diameter (ø): 125 mm Length: 30 mm Ncsdjwrrnwopfx Aqvet Material: steel Knives: WP Z2

Condition: used, Bore: 40 mm Nsdpowrrmmsfx Aqvjct Swing diameter (ø): 125 mm Marking: BG-Test Length: 30 mm Material: steel Knife: WP Z2 V4

Condition: used, Bore: 35 mm Cutting circle (ø): 140 mm Nedpfowma S Tox Aqvjct Length: 40 mm Material: steel Knives: WP Z2 V2

Condition: used, Bore: 40 mm Swing diameter (ø): 145 mm Nodpfxsv Dgmms Aqvsct Length: 17 mm Material: steel Blades: WP Z2 V2

Condition: used, Bore: 40 mm Swing diameter (ø): 145 mm Length: 17 mm Material: steel Ncjdpov Df Shefx Aqvjt Blades: WP Z2 V2

Condition: used, Bore: 30 mm Width: 60 mm Spare blade: on request Ncedpfxjt Stars Aqvjt Cutting circle (ø): 100 mm Material: steel Blade: WP Z2

Condition: new, The manual milling machine Omec 650-M is utilised to indent dovetails for drawers and various furniture elements. The machine is equipped with a mill spindle which allows cutting of indents of adjustable height. The machine can cut four types of indents with different pitches. Locking and unlocking of pieces takes place manually by means of eccentric ar- bores. The controls are realised with a magnetothermic switch that is directly installed on the terminal board of the motor, and lever hand wheels installed at the sides of the machine. The machine is designed and built according to EC Safety Standards Ncedpedcdwbofx Aqvet installed power 0,75 kW, 400 V, 50 Hz no of spindles # 1 spindle revolutions 16.500 RPM machine weight 100 kg machine dimensions (l x w x h) 450 x 540 x 1420 mm work piece dimensions: work piece lenght 200 – 1500 mm work piece width 60 – 280 mm intent height 5 – 18 mm front thickness 7 – 45 mm side thickness 7- 30 mm The machine is supplied with the following components: - Eccentric HSS mill cutter assembled on the machine - Tool Kit for adjustments and maintenance - User's and instruction manual

Condition: used, Blade: Z4 - 125 x 20 x 35 mm, - max. 9,000 rpm, Ncedpfx Aqjlf I Hksvot - MECH.

Condition: used, functionality: fully functional, OMEC 450 Manual Drawer Joint Milling Machine – after technical inspection, ready for operation Specification: • Condition: Used, after comprehensive technical inspection • Manufacturer: OMEC • Total power: 1.1 kW • Max milling width: approx. 35 cm • Manual head feed Nsdpfx Aey R Ewpjqvsct • Pneumatic clamps – 4 pcs. • Overall dimensions: 90 x 60 x 128 cm (W x L x H) Additional information: • The machine is in good technical condition, ready for immediate use • Shown photos reflect the actual condition of the item for sale • Possibility to switch on and test the device on site • Free machine operation training (at the company headquarters) • The price stated in the listing does not include VAT and transport costs Financing and transport: • We arrange transport via MDD fleet, courier companies or external carriers • We offer financial support in the form of leasing or lease loan

Year of construction: 1976, condition: used, Machinetype: Hinge joint fence machine Make: WAFIOS Type: HJGM Constr. year: 1976 wire diameter range: 2,0-3,0 mm working width: 2000 mm vertical distance of wires: 150 mm Njdow Rq Avepfx Aqvsct

Condition: excellent (used), Year of construction: 2002, The KSF-2E is the world’s leading specialized CNC milling machine for fully automated production and complete machining of high-quality cross joints and grids in the serial manufacturing of glazing bars for windows and doors. Thanks to its dedicated aggregates, the machine produces cross joints from wood, aluminium, MDF, or PVC with outstanding quality and precisely processes all components of the glazing bar grids. OPERATIONS: • Cross joints in various designs and sizes • End processing of glazing bars • Cutting frame profiles to size Ncsdpfx Aqoxl Dnaovet The machine is additionally equipped with a transverse feed/magazine for components.

Condition: excellent (used), functionality: fully functional, WMA WMP 08 Spot Welders in TOP Condition, The unit shows barely any signs of use and has only been operated very occasionally. Air-cooled one-handed spot welding unit for vehicle manufacturing, tank construction, steel cabinet fabrication, sheet metal processing, and the wire industry. - Trouble-free welding of all sheet metals - Galvanized sheets can be welded perfectly thanks to controlled current rise and fall - Air-cooled, equipped for external water cooling - Tools can be easily changed using standardized rotating connectors - Only one plug required for welding current, control cable, and water cooling - Always reproducible welding results thanks to built-in automatic energy control Microprocessor Thyristor Control - Constant current regulation - Continuous process monitoring - Simple and ergonomic operation - All set parameters and process values are visible at a glance - Changes to welding parameters allowed only for authorized personnel - Management of configuration and program settings possible via a central PC WMA WMS 108 Microprocessor Thyristor Control - 7 time settings - 8 program slots - Built-in controller - Automatic mains frequency detection 50/60 Hz - Power outage-proof parameter storage - 'with/without current' toggle at the press of a button Additional configuration parameters (locked for user): - Program selection - Advance contact - Advance contact time - Two-hand lock (check) - Locking start signal - Current flow control - Response threshold - Current flow monitoring - Monitoring time - Current flow control - Power factor adjustment - Delay first half wave External inputs (24V, DC stabilized and switching): - Thermal switch - Thyristor temperature - EMERGENCY STOP - Start 1 Ncedpexrb Tgjfx Aqvst - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke ON - Program interruption after hold time (only force) - Two-hand lock (check)* * These functions can be activated or locked via configuration parameters. External outputs (24V, DC unstable ± 20%; + switching, max. 5 W): - Solenoid valve pre-stroke - Solenoid valve welding - Relay advance contact - Relay ready for operation Dispatch via freight carrier possible upon prior arrangement. #8407