Used Finger for sale (1,149)

Condition: excellent (used), total length: 3,000 mm, total width: 1,500 mm, Panel press in very good working condition + Grecon finger jointing Giedpfjt Uduxsx Aiaeu

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 89257, pressing force: 60 t, input voltage: 380 V, total height: 2,000 mm, type of input current: three-phase, working height: 2,000 mm, total length: 9,500 mm, control cabinet width: 1,000 mm, total width: 2,000 mm, year of last overhaul: 2026, pressure: 100 bar, control voltage: 12 V, workpiece height (max.): 120 mm, rotational speed (max.): 6,000 rpm, air pressure: 8 bar, We offer this ready for use WEINIG Dimter HK200 finger jointing line, year of construction 1996. Gsdozatztjpfx Aiaeiu If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: not inspected (used), Year of construction: 2020, Working width from to 50 x 150 mm Gsdpsyhq Umefx Aiaoiu Working height from to 20 - 50 mm

Condition: excellent (used), FAMAD PDFD-I Wood Jointing Line 1. FAMAD DFC-60M Milling and Tenoning Machine Unit Gijdew Iy Nyjpfx Aiaou Input element length 170-900mm Milling height 20-155mm Milled element package width 650mm Carriage operating speed: Work 10-23m/min Return 32m/min 2. PHSL Pressing Unit Glued element width 35-155mm Glued element thickness 20-70mm Glued element length min/max 4500-6600mm Possibility of programming inter-cuts Line capacity up to 4000mb/shift 3. General information Length 15700mm Width 3350mm Power demand 48kw Year of production 2006 Very good condition

Condition: new, Schunk PZN-plus 80/2 3-finger centric gripper AG 0303, unused in original packaging, 100% functional, scope of delivery as per photos Gedjx Eudhjpfx Aiaoiu

Condition: new, Schunk PZN-plus 80/2 3-finger centric gripper HA 030135, unused in original packaging, 100% functional, scope of delivery as shown in photos. Gjdpfx Aox Eudnoiasiu

Condition: new, Schunk PGN100-Plus stroke 2, 2-finger parallel gripper 371 152 HA 050420, unused in original packaging, 100% functional, scope of delivery as per photos. Gijdpfx Aox Euc Rsiaju

Condition: good (used), Year of construction: 2010, functionality: fully functional, milling height: 180 mm, Finger Jointing Line WEINIG NKT Doppel-Pack DP20 An industrial finger jointing solution – engineered for maximum precision and efficiency Gisdpfx Aiezcrk Ejaeu Technical Specifications: - Infeed timber length: min. 130 mm | max. 1000 mm - Outfeed timber length: min. 3700 mm | max. 7400 mm - Timber cross-section: min. 20 x 40 mm | max. 80 x 180 mm - Cutter diameter: 370 mm - Finger profile: Vertical / Horizontal, 10/11 fingers, 3.8 mm pitch - Glue application: double-sided, PVAC white glue - Connected load: 80 kW Note: The machine is currently dismantled and in stock at our facility. Inspection is possible by appointment. Scope of supply: - WEINIG NKT Doppel-Pack DP20 incl. control unit - Integrated gluing station for double-sided application - Operating manual & documentation Hydromat 17B (7 Spindles) General Information Manufacturer: Weinig AG Model: Hydromat 17B // 7 Spindle (various tooling) Type: High-performance profiling planer/moulder Year of manufacture: 1989 Operating voltage: 380 V / 50 Hz Bottom-Right-Left-Right-Left-Top-Bottom, rigid table Description Heavy-duty high-performance planer and moulder made from vibration-dampening, warp-resistant cast components in a modular construction system. Designed for precise and economical wood processing with sustained high capacity. Mechanical feed, adjustable between 5 – 35 m/min, feed motor 5.5 kW (7.5 HP). Surfacing table length 2 m, quick adjustment available. Cutting depth for surfacing and jointing spindles, each adjustable up to 10 mm. Technical Data • Feed speed: 5 – 35 m/min, mechanical • Feed motor: 5.5 kW / 7.5 HP • Operating voltage: 380 V / 50 Hz • Table length: 2000 mm • Adjustable cutting depth: 10 mm (surface and jointing sides) • Machine version: No counter bearing, heavy-duty configuration

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, GRECON ULTRA TT wood joining line Year of manufacture: 2006 The machine is equipped with trimmers for edge-gluing and face-gluing, making it versatile – it can glue elements edge-to-edge (in a zigzag pattern) or face-to-face (in a straight line). Technical data: Machine dimensions: - Length – 15,000 mm - Width – 6,000 mm - Height – 2,100 mm Dimensions of the material being glued: - Width – min. 40 mm – max. 205 mm - Thickness – min. 20 mm – max. 80 mm - Length – min. 150 mm – max. 1,000 mm - Pressing length – min. 3,000 mm – max. 6,100 mm Power supply: - Rated voltage 400V - Power consumption 43.5 kW - Connection fuse 100A The machine consists of the following components: 1. Loading conveyor 2. Automatic rotating table 3. Milling table Gijdpfezcuv Rjx Aiasu 4. Milling machine 5. Infeed station 6. Press 7. Press outlet The machine is in fully functional, good working condition.

Condition: used, *Available from approx. end of 2025* Fully automatic finger jointing line for the following dimensions: Thickness: approx. 24 – 100 mm Width: approx. 80 – 240 mm Finger jointing length: 400 – 1,500 mm Finished length: 2.50 m – 13.50 m continuously variable Consisting of the following system components: - SMB vacuum destacking lengthwise with 2 lifting tables and 2 package roller conveyors, built in 2013 Package dimensions max. 1.20 x 1.20 x 6.00 m 4 suction pads Sicko system Separation and infeed into roller conveyor for scanner feeding, board turner, switch for too moist, too dry, switch for B-quality, marking station or automatic operation - Bidac end-face scanner for cupping detection, built in 2013 - Brookhuis moisture measurement FMI 5 Year of manufacture 2019 - Microtec scanner Goldeneye 502, year of manufacture 2012 with X-ray, 4 color cameras and new optimization software - Dimter-Opticut 350-2, year of manufacture 2003 with paddle ejector, year of manufacture 2009 and associated sorting belts and pneumatic ejector for 2 additional qualities - NKT packaging - NKT finger jointing system with turntable Spezialpack AH 1050, year of manufacture 2005 consisting of: Milling machine · Tipping station · Threading section length 5.0 m · Cyclic press length 6.00 m · Cross-cut saw - SMB stacking machine, year of manufacture 1998, 2.50 - 13.50 m length, divisible into 2 units (e.g. 2 x 5.0 m) 8 stacking arms, 8 stacking tongues, manually adjustable electro/hydraulic stop, package width: max. 1200 mm, package height: max. 600 mm, hydraulic package pusher Storage location: Customer Gsdpfsvvi Tysx Aiasiu

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 09 0751 01 981004, type of input current: three-phase, year of last overhaul: 2025, Equipment: double-sided, A woodworking company in Latvia is offering a complete Weinig GreCon Combipact finger jointing line for sale. The machine has had only two owners, both well-known companies in Latvia. We have operated the machine ourselves for the past 8 years. The reason for the sale is the recent purchase of new Weinig equipment. The machine is in full working order and is currently stored in a heated facility, ready for its next owner. The machine has only been operated in a single shift. The machine also has the option to produce finger joint connections for furniture. The machine can be inspected and demonstrated in operation at our facility. Regular maintenance and repairs have been carried out throughout its service life to ensure maximum productivity and profitability. Spare parts have been regularly sourced from the official Weinig dealer in Latvia. Gjdpfxoza Ibuj Aiaeiu The machine is available for inspection and testing in Kuldīga, Latvia. All original Weinig manufacturer documentation is available. Some spare parts are also available for this machine. We are also selling a Weinig Dimter Opticut optimization line that was purchased together with this machine. Please see our separate advertisement for details. For further information, please contact us by phone or email, and I will provide all technical information. Additional images and videos can also be provided.

Condition: used, functionality: fully functional, Metering and application system Hydrotop 1 E400R + Ecotac_C for single-component (1K) PUR edge gluing for package dovetail joint systems Gsdpeul Shnjfx Aiaoiu Glue application – dovetail joint Adhesive application – dovetail joint in very good condition functionality tested

Condition: used, Milling head FC-10KZ6: Milling spindle: 50 mm Motor: 18 kW Spindle speed: 6000 rpm Tool dimensions: 250/50 mm Dust extraction nozzle diameter: 150 mm Chipper: 300 mm x 8 mm Chipper motor: 6 kW - 3000 rpm Dust extraction nozzle diameter from chipper: 80 mm Working width of the table: 600 mm Board thickness: 20-50 mm Working height: 25 - 120 mm Length of glued board: 200 - 600 mm Table drive: electromechanical Feed rate: 3 - 30 m/min, steplessly controlled Gedjy Ud Uuepfx Aiajiu Glue applicator: special glue unit with comb Loading of glued boards: manual, onto a loading belt system Remaining operations: automatic Press FC-10PZ6/2: Width of glued board: 25 - 120 mm Thickness of glued board: 20 - 50 mm Length of finished board: 6000 +20 -50 mm Pressing: hydraulic Hydraulic cylinder: 100 mm Hydraulic unit: up to 100 bar Unit motor: 3 kW - 1500 rpm Cut-off saw: 400 mm Saw motor: 3.5 kW Set performance, depending on the material used: up to 4 cycles/min (up to 4 six-meter strips/min) Dimensions: Length: 13600 mm Width: 3800 mm Height: 1850 mm

Condition: good (used), Rear back gauge fingers for Promecam press brakes, adjustable in height. Sold as a complete set or in pairs. Gisdpfx Aezagq Ujiaeu

Condition: like new (used), Year of construction: 2022, operating hours: 500 h, functionality: fully functional, Drying paternoster for finger-jointed boards Consisting of: - Transfer chain to finger-jointing press (foldable) - Drying paternoster (approx. 7 m, board length up to 6 m) - Cutting and zero-cutting saw - Conveyor belt for waste wood disposal - Stacking machine - Strip magazine not for sale Giodjwclkyjpfx Aiasu - Package cross conveyor The machine is in very good condition and has had very little use. The machine is still assembled but available immediately.

Condition: used, Stress line and finger joint line capable of producing lengths up to 13 m, which is the maximum length the planer line can handle. Gisdpfx Aijzaazgoaou This can be sold in two different packages: either the stress line and finger joint line together, or the planer line separately. For more information, please contact us.

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 71, Finger Jointing Line GOMA FC10 KZ6 + FC10 PZ6 TENONER FC-10KZ-6 Milling spindle 50 x 210 mm Main motor 18.5 kW Chipper 300/60 x 8 mm, 6 kW Scribes for "line-to-line" jointing 2x160mm, 1.1 kW Working table width 600 mm Package height 30 to 150 mm PRESS FC-10PZ6 Package width 30-150 mm Thickness 20-70 mm Hydraulic pump 100 bar Finished board length 6000 mm Possible intermediate cuts, e.g. 2x3000mm, 6x1000mm, etc. Godpfx Aoy Sw Uvsiasiu Machine in good working condition, used. Good technical condition. Price 110,000.00 PLN net, negotiable.

Condition: good (used), Year of construction: 2005, AUTOMATIC FINGER-JOINT LINE, WITH DOUBLE HEAD AND 6,000 mm PRESS. Brand YONGQIANG, model FJL150/8 Dimensions of boards at input: Maximum/minimum width: 150 mm / 30 mm Maximum/minimum thickness: 80 mm / 30 mm Maximum/minimum length: 895 mm / 150 mm Dimensions of finished boards: Maximum/minimum width: 150 mm / 30 mm Maximum/minimum thickness: 80 mm / 30 mm Maximum length: 6,000 mm 1. Transfer system with smooth conveyor belts for feeding the pieces into the first finger-joint machine. 2. Finger-joint machine MHB3515B-A, complete with a movable carriage with hydraulic movement and vertical and front clamping devices, a conveyor belt for feeding the pieces, an incisor unit, a disc-cutting unit, and a ram unit. 3. Finger-joint machine MHB3515B-B, complete with a movable carriage with hydraulic movement and vertical and front clamping devices, a conveyor belt for feeding the pieces, an incisor unit, a disc-cutting unit, a ram unit, and a gluing unit. 4. Transfer system with motorized rollers and an RC 2x800 piece-by-piece separation system, consisting of a transverse pneumatic piston and a motorized belt in a vertical position. 5. SC300 transfer system, with a conveying system using two side chains, one of which is adjustable in width, and a central clamp along the entire length of the transfer system, with vertical idler rollers. The function of this transfer system is to guide the pieces one by one into the press. 6. Hydraulic finger-joint press MHB15608-C, consisting of a grooved and motorized roller for feeding the pieces, a cutting unit, a pre-pressing system, and a pressing and ejection system for the pieces, and support arms for unloading the slats. Giodpfx Aijza Dhqoasu Used machine, manufactured in 2005. In very good condition.

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: FSL-62H-FJ-420A, Furnimate Semi-Auto Finger Jointing Line, new 2019, very good working condition. Model: FSL-62H-FJ-420A Will accept Lengths from 300 to 1400m/m, x up to 180m/m high. Maximum Pressing Length up to 4,500m/m. Semi Automatic Single Sided Finger Joint Milling Unit with Cut off Saw, Scoring Saw & Milling Unit for the Finger jointing operation. Auto feed with conveyor to Glueing and pressing unit, will take timber jointed up to 4500m/m long x 1400m/m wide. Gluing Press with Auto ejection of the glued section. Show us your mobile number for images on WhatsApp. Gedjuaf Rdepfx Aiasiu Can be demo'd working in Sheffield, Yorkshire UK. Full documentation available. Photos & Video etc, available on Whats App. Price ex. works, dismantled & loaded buyers transport. NOTE: New Price: Euro 18,000.00 or STG£15,000.00 Plus Vat if applicable

Condition: good (used), Year of construction: 1990, I sell the combined tenonging machine with drilling head BALESTRINI I2F 1 tilting table with pneumatic material pressure. Automatic cutting saw from bottom. Gjdpfehw Dfnex Aiasiu Tenoning milling head able to do the finger-joint as well. Drilling head for dowel holes production 3 spindles. Revolving 360° enabling any position. Feeding automatic. Positioning on end-sensors. Available immediately.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Technical data: Wood infeed length: 150–700 mm Wood width: 40–150 mm Wood thickness: 20–50 mm Press length: 6100 mm Pressing force: 120 kN / 12 t Milling spindle power: 15 kW Chipper power: 5.5 kW Glue application system: Flankenjet / Glue nozzle Giedpfx Aijy N D A Usasu Performance: Tenoner – 2 bundles per minute Press – 2 cycles per minute

Condition: reconditioned (used), Year of construction: 1998, functionality: fully functional, Fully automatic package jointing line 500 mm Packaging width - Consisting of: - Finger jointing Central Milling Machine - 2 fixed transport tables - 1 Wheeled processing unit - 2 milling spindles - 2 flakers - Glue - Separating station with tilt-back - Threading section 2 transport chains - Feed with double rollers - Extrusion press 12 ton - crosscut - Packaging width 500 mm - wood in max. 1950 mm Gedpfxolatv As Aiaoiu - wood in min. 200 mm - Workpiece 50-215 mm - Workpiece thickness of 25 to 100 mm - Performance 2,5- 3 tables / min - Press force max. 12000 kp - Length of the threading section 3900 mm - Lenght of the press bed 5000 mm - wood with fingerjoint endless - Engine performance milling spindle 2x18,5 kW - Engine chipper 2x 7.5 kW

Condition: used, Working width from to ~ 45 - 95 mm Working height from to tba mm 3.000 mm milling height 130 mm Semi-automatic finger jointing line Sauter type RS for joining wooden workpieces by means of finger joints. The system is suitable for waste wood processing and for the production of extended solid wood lamellas. Gijdoy Dh Siepfx Aiasu Including dismantling and loading. Fixed loading date: 15.06.2026. Consisting of: - Milling and gluing machine Sauter type RS-FPEL 130 - Press Sauter type RS-DKPV 6 - End length saw Sauter DAS 500

Condition: ready for operation (used), -packet-jointing line -for timber infeed 900-5.100 mm -double-roller conveyor Gisdpfx Ajbqqzgeiaou -cut saw with marking recognition 15 KW -packaged -finger jointing milling automate 80 KW -singling cross conveyor -roller conveyor -cycle press hydraulic 20 KW -automatic under table circular saw 5 KW -wood widths of 70 - 255 mm -wood thickness from 22 to 140 mm -wood input from 900 to 5100 mm -pressing force 12 tons -capacity from 7.000 to 10.000 meters / 8 h -options example cycle press 25 to or 40 to

Condition: ready for operation (used), functionality: fully functional, Plant will be in operation until mid-July. The plant consists of an X-ray scanner (GreCon), cross-cut saw (GreCon), packaging unit, finger jointing milling machine, transverse conveyor, and finger jointing press (all GreCon). Finger jointing press, year 2004, type TP 12-25. Performance achieved: With an average board length of 3.74 m, output in 8 hours is approx. 10,000 linear meters of spruce. With an average board length of 2.43 m, output in 8 hours is approx. 7,000 linear meters of larch. Board widths: 90 mm/160 mm and 110 mm. Min: thickness 17 mm, width 70 mm. Max: thickness 90 mm, width 270 mm. Gedpfjy N Uu Iex Aiaoiu