Used Fireplace Template for sale (169)

Condition: excellent (used), Year of construction: 2022, Column-mounted slewing jib crane, Vetter, 1,500kg, 6m jib, 6m height – unused - : Price ex-location: only €13,950 (net)! Manufacturer: Vetter Model: Meister M Year of manufacture: 2022 Rated capacity: 1,500kg M15-6.0 Column-mounted slewing jib crane designed in accordance with the EC Machinery Directive, relevant EN 13001 standards, and VDE regulations, suitable for outdoor use (wind force 4, 20–28 km/h; moderate breeze). ID No.: 50010400 EN 13001 HC2 S3 HD2 Slewing range: 360° ∞ Max. permitted hoist weight: 180kg Max. permitted hoisting speed: 16m/min Jib outreach: 6,000mm Underside of jib: 6,000mm Overall height: 6,470mm Bolt circle diameter: 630mm Base flange diameter: 710mm Beam flange width: 180mm Front clearance: 250mm Inside clearance: 915mm Support strut length: 1,540mm Max. vertical load: 32kN Max. moment: 11,575kNcm Weight: 1,756kg Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Finish: Pipe column for outdoor use (corrosivity category similar to C3), steel grit-blasted with a coating in narcissus yellow RAL 1007, specified layer thickness 120 μm VETTER AnchorFix system: set includes anchor bolts, nuts, washers, locknuts, and steel template. Bolt circle (DL) ø 630 mm. Foundation edge length (G) 2,400 × 2,400 mm, foundation depth (Gt) 1,000 mm. Flat cable power supply with cable trolley, C-rail and tension arms for mounting on beam. Short weather protection canopy size 2, clamp-on for jib, provides shelter for hoist in idle position. Robust, hot-dip galvanized steel tube construction with weatherproof, plastic-coated tarpaulin, color rapeseed yellow RAL 1021. Mandatory for outdoor operation. Usable up to wind force 7. Dimensions (L × W × H): 1,320 × 1,520 × 1,042 mm Electric chain hoist VETTER type electrolift® SiXX Model: SiXX8F Mechanism group FEM 9.511 2m Mechanism group ISO M5 Number of falls: 2 Rated capacity: 1,500kg Lifting height: 5,351mm Headroom: 649mm Lifting speeds: 4 / 1m/min Hoisting motor: 1.45/0.36kW Duty cycle: 40/20% Dead weight: 65kg Protection class: IP55 Electric trolley type SiXX-EF-22-200 Bjdsyhxk Hepfx Af Asdh Travel speed: 24/6m/min Trolley motor: 0.2/0.05kW Duty cycle: 40/20% Dead weight: 19kg Flange width: 180mm Detailed operating manual and technical drawing available on request as PDF Previous new price: €18,436 (net) Condition: very good (this crane is new and unused – classic incorrect order) Availability: immediately Location: 30419 Hannover

Condition: excellent (used), functionality: fully functional, COPY SHAPER and SANDER machine , automatic , model PADE UINZE 2+2 second hand machine working condition : Excellent CE mark : YES the machine has been designed for the production of parts of tables , chairs , furniture , etc. the machine executes shaping and sanding operations simultaneously on two sides of a workpiece , with the aid of a template prepared according to the desired shape with accident prevention cabin as shown in the photo machine composed by n.04 working units : 1+1 shaping units . motor power Hp 10 each one 1+1 shaping / sanding units . motor power each one Hp 5 / 6,5 ( 2 speeds ) max. working width mm.350 max. workinh heigth mm.180 max. working length mm.2500 hydraulic carriage . pump motor power Hp 5,5 adjustable hydraulic carriage advance speed: 1:15 m/min. hydraulic carriage return speed: 40 m/min. volt. 380/50 Bsdszk I Egepfx Af Ajdh total installed power Kw 30 weight kg. 3500

Year of construction: 2000, condition: excellent (used), As-new lock copy milling machine for PVC and aluminium profiles from a training workshop Key features: - 3-sided machining of sash and frame profile bars in a single clamping, e.g. for profile cylinders, handle holes, and lock cases - Equipped with 4 tracing pins for flexible and simple use of the template system - Convenient insertion of the profile bar without interfering milling units - Manual profile bar rotation device for 3-sided machining - Optimum machining quality due to the design-based use of short tools Max. workpiece cross-section (W x H): 200 x 100 mm Milling area (L x W): 315 x 130 mm Plunge depth: 200 mm Speed: 12,000 rpm Bjdpfxjyrh Nco Af Aodh Drive power: 1.5 kW at 400 V Machine dimensions (L x W x H): 1260 x 820 x 1650 mm Machine weight: 340 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), WADKIN SILHOUETTE STRAIGHT AND PROFILE GRINDER TWIN GRINDING HEAD:  A CENTRAL DESIGN FEATURE THAT ALLOWS FOR EXTREMELY FAST CHANGES BETWEEN PROFILE GRINDING AND STRAIGHT KNIFE GRINDING OR RESHARPENING. CAPACITY:  IT FEATURES A FULL 300 X 350MM GRINDING CAPACITY. PRECISION TOOLING:  USES A UNIQUE TURRET HOLDER THAT CAN HOLD UP TO SIX STYLI, ALLOWING FOR QUICK SETUP ACROSS VARIOUS WORK TYPES. Bodpfx Afsyxxgmj Aodh ADJUSTABILITY:  THE TEMPLATE SLIDE INCLUDES COARSE AND FINE ADJUSTMENT VIA DIAL INDICATORS FOR HIGH-ACCURACY POSITIONING. COMPACT DESIGN:  BUILT WITH SPACE-SAVING FEATURES TO FIT INTO SMALLER TOOLROOMS WHILE MAINTAINING THE ACCURACY OF LARGER AUTOMATIC MACHINES. INCLUDED: 40MM OR 50MM ARBOR AS NEEDED OPTICAS SETTING STAND

Condition: used, color: other, first registration: 08/2010, Year of construction: 2010, Empty weight: 350 kg Serial number: NO TEMPLATE We have a stock of >100 axles. Bdsdszwu S Hopfx Af Ash Please contact us if you can't find what you are looking for.

Condition: used, color: other, first registration: 08/2010, Year of construction: 2010, Empty weight: 350 kg Serial number: NO TEMPLATE We have a stock of >100 axles. Please contact us if you can't find what you are looking for. Bsdpfjzwu Tdsx Af Aedh

Condition: used, This listing is for a Life Technologies Ion Torrent OneTouch ES Bodpfx Afexzg T Re Asdh This unit does not come with the Ion Torrent OneTouch ES Enrichment component of the Ion OneTouch 2 template amplification & ample preparation system 110-240VAC 50/60Hz 0.5 Amp

Condition: used, color: other, first registration: 04/2005, Year of construction: 2005, Empty weight: 450 kg Serial number: NO TEMPLATE. We have a stock of >100 axles. Bodpfx Aoy Efvbjf Ajdh Please contact us if you can't find what you are looking for.

Condition: as good as new (ex-display), Year of construction: 2026, CNC Machining Centers Rover Multi Up M C S Working Area*: X = 3280 mm; Y = from 1580 to 1660 mm, depending on work conditions Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 74 mm Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 29 mm Workpiece Clearance*: Y = 1900 mm Axis Travel*: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Subdivision of the vacuum system into 2 working zones and 2 clamping zones in X. AUXILIARY VACUUM SYSTEM – 2 zones Allows clamping of workpieces using vacuum templates. Remote Control RM850 Rover Multi Up M C S Panel – Multi Purpose Regular Configuration 2 Compatible with the turret tool magazine with 16 positions and the side tool magazine with 12 positions. The tool magazines can also be retrofitted. Uninterruptible Power Supply (UPS) for machine PC. 6 ATS workpiece supports – 18 module carriers — 6 aluminium workpiece supports. The positioning of the workpiece supports is via linear guides with ball bearing slider blocks. Clamping is performed on the front and rear linear guides via pneumatic cylinders. Clamping is released by a push button located at the front of the workpiece support. — 18 module carriers, 132 x 132 x H 41.5 mm, with independent pneumatic clamping. The vacuum modules can be rotated in 15° increments on the module carriers; an ideal solution for shaped parts. — 18 covers for module carriers without template. SA (Set-Up Assistant) working table for tables up to 1550 mm. Supported manual positioning system with motion direction indicator and position indicator. — Sensors on each working table and along the X-axis of the working area. — Display of direction and position achieved for the carriage during positioning phase, mounted on each working table. According to the programmed configuration of the working tables, the system indicates the direction of movement for each working table and carriage, and confirms with a green LED and audible signal when the correct position is reached, with a tolerance of +/- 1.5 mm. Subdivision of the pneumatic system into 2 working areas in X. Machining unit with 5 interpolating axes, 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled – 20,000 rpm Extraction hood with 12 NC-controlled positions for the 5-axis electrospindle. Flange for preparation of a 5-axis interpolating machining unit for mounting aggregates. Coolant system Additional Z-axis carrier for rear machining units, with independent Z-axis. Drilling head BH 24 L Side tool magazine with 12 positions, integrated into the machine bed. Bdedpfxsy Ehrxs Af Aeh Turret tool magazine with 16 positions, installed directly on the X machining unit. HSK F63 tool adapter, equipped with a long integrated flange, for saw blades on the 5-axis head. Saw blade 300 mm, for tool holder. Hi-Tech tool set Complete set of tools for the acceptance test Consisting of the following 9 parts Replacement of standard PC with a high-performance PC. Digital device for measuring tool length up to 130 mm diameter. bSolid NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1. License WorkCenter suction cup proposal 5-Axis Simultaneous Material removal simulation 12-month warranty period Location: ex stock 54634 Bitburg - immediately available -

Year of construction: 1994, condition: excellent (used), functionality: fully functional, Horizontal cutting ranges: With stop: 300 × 100 mm With template: 270 × 70 mm Travel: 80 mm Bdedpfx Aoyxnx Sjf Ajh Vertical cutting ranges: With stop: 290 × 100 mm With template: 230 × 70 mm Travel: 120 mm

Condition: excellent (used), Year of construction: 2004, Weinig Rondamat 960 Powerlock (Automatic straight knife grinder and profile grinder) Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! Specification as follows Weinig Rondamat 960 Powerlock / HSK profile grinder. High pecision knife grinder for sharpening straight knives and profiling using a template. Sharpening straight knives in the cutter block. Manual grinding machine for profile and straight grinding. Grinding wheel diameter min./max.: 150 mm / 225 mm Grinding wheel width: Ceramic 5 mm, Borazone 10 mm Grinding wheel bore: 60 mm Tooling circle min./max.: 100 mm / 300 mm Tool width max.: 240 mm Grinding wheel drive: 1,1 kW Spindle rpm: 1700 / 2000 / 2400 / 3000 U/min Free angle: Radial: (at the back) 10 - 30 degrees, Axial: 0 - 20 degrees For swivel heads up to 60 degrees Coolant tank approx. 50 litres Table feed 0 - 240 mm Electrical connection approx. 2 kW Pneumatic connection value 5 bar Operating voltage 380 V / 50 Hz Full documentation. POWER LOCK SYSTEM option For grinding powerlock tools. Tool holder with manual HSK quick clamping system. Radial table clamping with fine adjustment Max tool width 240mm Max Bsdpfx Asw Np Uuof Ajdh COMFORT PACKAGE option Variable grinding wheel speed 1500 to 3000rpm Lamp Back clearance angle is motorised Grinding wheel advance is motorised Setting of the side clearance angle is pneumatic Hydraulic grinding wheel clamping. Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!!

Condition: used, Year of construction: 2021, Technical Data Automatic Central Lubrication Working Area Axis Travel X = 4000 mm Bdjdpfezux Iaex Af Ash Y = 1670 mm Z = 500 mm Working Range X = 3300 mm Y = 1280 mm Z = 250 mm, clearance height depending on the clamping system Operator Terminal on the Left Side of the Machine Handheld Terminal for Controlling Axis Speed, Including an Emergency Stop Switch Machine Software: Woodflash Consisting of: - CNC Board - Tool Database - Program Editor Position Indicator for Workpiece Support and Vacuum Suction Cup Vacuum Connection for Template Milling on the Left Side of the Machine: Connection: 12 mm 1 Vacuum Pump with a Total Suction Capacity of 90 m3/h at 50 Hz or 108 m3/h at 60 Hz Milling Spindle 12 kW (S6) HSK F63 12 kW (S6) Full Rated Power at Approximately 12,000 RPM Speed: 1000 - 24,000 RPM Air-Cooled C-Axis 0-360 for Milling Spindle 12-Position Linear Tool Changer on the Left Side of the Machine Frame, Including a Pickup Station for Aggregates Max. Tool Diameter: 250 mm Max. Tool Length: 240 mm Drilling Head DH 16 4H 2S 12 Vertical Spindles 7 Spindles in the X-Direction and 5 Spindles in the Y-Direction 4 Horizontal Spindles 2 Spindles in the X-Direction and 2 Spindles in the Y-Direction Pre-Travel = 70 mm Drilling Length = 70 mm Shaft Diameter D = 10 mm 2 Nut Saws, One Each in the X and Y Directions Max. Saw Blade Diameter: 120 mm Max. Blade Thickness: 5 mm Max. Speed, Continuously Adjustable: 7500 RPM Safety System with Light Curtain on the Front

Condition: used, Year of construction: 1983, workpiece diameter 250 mm centre distance 0 mm honing length max. mm max. module 5 Gear Ø, min./max. 10 / 250 mm Module range 1 - 5 Length of teeth / max. table stroke 500 mm Height of centres of tailstocks 220 mm Max. weight of workpiece 50 / 100 kg Honing head swivelling +/- 35 ° Speeds of honing tool 20 - 500 rpm Size of honing tool, Ø x width 300 x 40 mm Bdodpfx Afot Hwzpo Aoh Workpiece speeds 500 - 3,000 rpm Total adjustment of cross slide 270 mm Rapid traverse of cross slide 50 mm Infeed travel of cross slide, mechanical 1 - 8 mm/Ø Roughing / finishing infeed 1 - 29 / 0.2 - 2.8 mm/sec Table speeds, hydraulic 0 - 6 m/min Total electrical load 5.5 kW - 380 V - 50 Hz Weight 3,200 kg Accessories / Special Features * Working parameters can be preset using counters and control units. Automatic working process with workpiece counter. * All roughing and finishing infeeds can be adjusted by a decade switch; as well as by table reverse times and fast infeeds with preset times (1sec = Ø 0.04 mm), set on a potentiometer. Ampere display, etc. * Convex honing and conical honing are possible via templates. Asymmetric honing is also possible if the workpiece is prepared appropriately (i.e. pre-shaped). * Separate honing oil unit with magnetic separator and fine filter. * Mechanical tailstocks for manual loading. * Oil mist separator. * Sliding doors with foot switch. * Separate hydraulic unit. Condition : Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. We have a large selection of gear machines available. Please let us know your requirements.

Condition: good (used), Year of construction: 2011, functionality: fully functional, Year: 2011 - technically efficient, ready to work - after full service Bdedpfett Abxox Af Aoh - 3-spindle - 2 copying templates - pneumatic profile clamps - infeed and outfeed feeders - cooling and lubrication installation

Condition: used, This listing is for the KSA SQ1E Steam Quality Test Kit. The system is in excellent working condition and ready for immediate use. ----- System Overview The KSA SQ1E is a portable, air-cooled steam quality testing unit designed for performing Non-Condensable Gas (NCG), Dryness, and Superheat tests in compliance with EN 285 and HTM standards. It provides a complete, self-contained solution for validating clean and pure steam systems used in pharmaceutical, biotechnology, and healthcare facilities. Unlike traditional systems, the SQ1E uses a built-in electric fan condenser, removing the need for cooling water and allowing tests to be carried out anywhere with minimal setup. The compact and durable design makes it ideal for on-site steam testing, validation, and qualification work. ----- Main Components KSA SQ1E Steam Quality Test Unit – fully air-cooled condenser assembly with built-in burette and measuring cylinder for NCG and dryness testing. Dryness and Superheat Test Assembly – includes test expansion tube, pitot tubes, flask, and temperature probe connections. Integrated Burette and Measuring Cylinder – illuminated and fitted with push-button zeroing and pause functions for precise readings. Power Supply – 12 V DC operation for the condenser fan and internal electronics. Steam Connection Set – includes tri-clamp and hose fittings for connection to clean steam systems. Bedpfx Aexqqyyef Ajdh Portable Case – compact and rugged housing with handle and workspace shelf for field testing. Operating Manual and Documentation – includes standard test procedures, setup guidance, and result templates. ----- Key Features Air-cooled condenser design eliminates the need for external cooling water. Performs all required steam quality tests: Non-Condensable Gases, Dryness, and Superheat. Built-in burette and measuring cylinder for accurate, repeatable measurement. Push-button zeroing, pause function, and backlit illumination for ease of use. Portable, plug-and-play design ideal for site validation and testing. Complies fully with EN 285, HTM, and pharmaceutical clean steam standards. ----- Specifications Manufacturer: KSA (Keystone Scientific / KSA Pharma) Model: SQ1E Type: Steam Quality Test Kit Power Supply: 12 V DC Cooling Method: Air-cooled, fan-assisted condenser Functions: NCG, Dryness, Superheat testing Operation: Manual/portable Compliance: EN 285, HTM, AAMI, PDA guidelines Construction: Stainless steel and aluminium components in rugged portable case

Condition: ready for operation (used), An optical image measuring system Keyence is available. Measuring dimensions X/Y: 100mm/200mm, measuring accuracy at L/100: +/-2µm, camera: CMOS. Includes measuring stage/support table, calibration template, computer and accessories. Documentation available. An on-site inspection is possible. Bdsdexu I A Hepfx Af Aoh

Condition: repair required (used), Year of construction: 2001, CNC-controlled wood lathe – processes 3 parts simultaneously. No controller included. Control cabinet without a computer; the attractive price without control should be taken into consideration. Technical specifications: Maximum working length: 1200 mm Maximum square section: 100 x 100 mm 3 parts processed simultaneously Programmable template Fagor control Bdedpfx Afef Ezgqo Aoh Designed for high productivity.

Condition: used, This listing is for a Life Technologies Ion Torrent OneTouch 2 The Ion OneTouch 2 Instrument performs template amplification as part of the manual workflow for the Ion PGM, Ion Proton, Ion S5, and Ion S5 XL systems. It provides scalable template preparation for all Ion semiconductor chips. The instrument has a small footprint and fits easily on any bench top. For a fully automated workflow, please see the Ion Chef Instrument. Bedjxzg T Depfx Af Ajdh The Ion OneTouch ES enrichment module is not included in this purchase. For both the Ion OneTouch 2 Instrument and ES module Efficiency and flexibility The Ion OneTouch 2 instrument integrates multiple manual template preparation steps into a single system. This enables parallel processing of multiple samples per day through modular design. It is flexible and supports scalable template preparation for all Ion semiconductor sequencing chips with up to 400 bases on the Ion PGM, up to 200 bases on the Ion Proton System, up to 400 bases on the Ion 520 and Ion 530 chips, and up to 200 bases on the Ion 540 chip. The need for gas is eliminated by the use of a peristaltic pump. Contributing technologies At the heart of the Ion OneTouch 2 Instrument are three breakthrough technologies that enable automated delivery of the template Ion Sphere particles. The first is the reaction filter that creates millions of microreactors in which clonal amplification occurs. The second is the fully integrated thermal cycler and disposable path amplification plate that enables robust thermal cycling of the microreactors. The third is the integrated centrifuge, which recovers the template Ion Sphere particles. Altogether this allows the OneTouch2 instrument to deliver massively parallel clonal amplification and recovery, all in a small bench top footprint.

Condition: used, color: other, first registration: 04/2005, Year of construction: 2005, Empty weight: 450 kg Serial number: NO TEMPLATE We have a stock of >100 axles. Bdsdpfjy Efw Sox Af Aeh Please contact us if you can't find what you are looking for.

Condition: used, Technical details: spindle passage: 60 mm turning length: 45 mm turning diameter: max. 56 mm drill depth: max. 70 mm revolution per minute: 48 - 1500 (spindle) U/min threading: Drehzahl: 24 - 750 U/min Bedpfju Iwyiex Af Aodh tool turret - number of stations: 8 total power requirement: 5,5 kW weight of the machine ca.: 2,4 t space requirement of the machine approx.: L:2,1x1,0x1,8 m Cam-controlled automatic lathe according to template. Workpiece is clamped via clamping cartridge. Turret head: disk turret Hahn&Tessky Esslingen, tool path 80mm, adjustment 36mm, distance collet/turret head min./max.: 72/188mm 2 pieces turning support, working stroke 45mm 2 piece cutting off support, working path approx. 40mm Cooling water system Machine is not connected. Sale at a low selling price. *

Year of construction: 1999, condition: used, Used machine Year of manufacture: 1999 Large milling area despite compact design Copy milling using side guides or templates in a 1:1 ratio Pneumatic copying stylus with two stages for two different cutter diameters The patented suspension of the copying lever guarantees precise milling with minimal effort Table height adjustment for extremely high profiles up to 400 mm Easy tool change via "spindle lock" Pneumatic material clamping device Metering spray device Bedpfxjxqihij Af Aedh Options Copying templates milled to standard dowel hole and PZ milling pattern Copying stylus Collet Guide system Material clamping device with 2 clamping cylinders Milling tool 8 mm Availability: short-term Location: Röllbach

Condition: excellent (used), Year of construction: 1966, Zeiss measuring microscope type WMM 150 /75 built in 1966 it is used to measure workpieces of all kinds, especially gauges, molds, thread gauges, templates, etc right angles x+y and polar coordinates x or y Its test range is 150 x 75 mm incl. operating instructions + accessories Bdjdpfx Aet T Uavjf Ajh

Condition: used, Year of construction: 2021, CNC machining center with a fixed worktable, double-sided driven gantry, and a 5-axis milling spindle with continuous interpolation. Machine for processing solid wood, wood-based materials, and various plastics. Base machine and gantry Machine base and gantry made of a ribbed, welded steel construction, offering very high rigidity. Guidance system and drives Gantry movement of the X and Y axes with rack and pinion and servo drive. DUAL GANTRY MOTORIZATION: Drive of the X-axis with two synchronized servo drive motors. Movement of the Z-axis via ball screw with servo drive. Dust-protected linear guide. Safety system Three-part safety floor mats allow for the placement of workpieces in the non-active area. Moving partial enclosure with a Lexan protective window for the machining units. Central lubrication Automatic central lubrication Vacuum system Vacuum system for pendulum machining with constant suction power in both work areas. Machine operation The machine is equipped with a cable-guided remote control for performing basic functions. Electrical equipment Dust-protected control cabinet (CE) according to IP 55 standard, including an air conditioning unit and a mobile control panel. Machine control OSAI Open Numerical Control 5-axis swivel head Z 700 Movement of the C-axis and B-axis via brushless servo drives - Maximum rotational speed: 750 /2 sec. - Rotation C-axis: Swivel axis: +/- 110 Technical data - max. travel speed X-axis: 60 m/min - max. travel speed Y-axis: 60 m/min - max. travel speed Z-axis: 24 m/min - Vector speed: 80 m/min - max. workpiece height: 500 mm - Machining area: 4210 x 1605 mm (Extended working area) - Compressed air supply: 7 bar - Suction power: min. 2200 m3/h - Suction speed: min. 28 m/s - Suction nozzle: 160 mm Work table Comec Designed Phenolic resin table, designed as a grid table, grid dimension 50 x 50 mm, for accommodating Cosmec suction systems and templates. The work table is divided into two work areas. Threaded holes in the table to mechanically fix workpieces, 3 pcs. retractable stops Vacuum pump Vacuum pump 250/300 m3/h (50/60 Hz), power: 5.5 kW Main spindle 5-axis spindle: 18 kW main spindle, liquid cooling, tool interface HSK 63 F Bjdpfx Afezux H Aj Asdh - 15 kW in S1 operation - 18 kW in S6 operation - Ceramic bearings - Direction of rotation: left/right - Spindle speed: 500 - 24000 rpm Extraction hood Extraction hood controlled via NC program, adjustable in height. 2 x Tool changer Moving 12-position tool changer for tool interface HSK 63 F - max. tool diameter 150 mm, if adjacent position is free - max. tool diameter 120 mm, if adjacent position is occupied - max. tool weight: 6 kg - max. weight of tool and holder: 40 kg Tool length measurement Station for automatic length measurement of the tool Note: Current status of the 5-axis simultaneous machining software through a maintenance contract.

Year of construction: 2021, condition: as good as new (ex-display), functionality: fully functional, Product features Superior performance: New TE module with special technique to ensure long service life. Precise temperature control technology ensures temperature flfluctuation of each well lower than 0.1℃. Unique bottom detection, compatible to reaction volume down to 5μl. Combination of precise light path system and super highly-sensitive PMT system ensures super high sensitivity and precision of flfluorescence detection. LED excitation light source of super long service life requires no maintenance. Brand-new automatic hot lid technology, free from manual operation, automatic open and close, effffectively prevent reagent evaporation. 6 channels flfluorescence detection, no crosstalk between difffferent channels. Equipped with whole block scanning and formulated line scanning mode, 96-well double-color scanning takes only 5.5s. Powerful software system: Operation interface in English language, simple to use. Bdsdpfjuvdnnjx Af Ajh Multiple templates, easy to fifind experiments saved, and fast to set up new experiment. (HRM), SNP analysis, relative quantitative and isothermal amplifification. Humanized software with user friendly interface. Comprehensive analysis and report function, flflexibly print single and multiple sample reports. Custom gain and auto gain fully satisfy various experiment demand of difffferent users.Various analysis modes: qualitative/absolute quantitative, standard curve, melting curve, high-resolution melting curve. Powerful technical team： BIOER owns over fififteen years’ experience in professional PCR development and technical accumulation. BIOER provides comprehensive pre-sales technical support and after-sales application engineers. It owns professional reagent development team which can provide a full range of reagents independently developed to deal with compatibility of the upstream and downstream reagents, making scientifific research easier. Brand new never used. Please check our other listings as well.

Condition: new, functionality: fully functional, turning diameter: 370 mm, Device for copying original parts or according to a template Stepless spindle speed control enables optimal adjustment to the workpiece High spindle rotational accuracy Robust cast iron construction ensures vibration-free operation High-quality belt drive provides optimal power transmission to the spindle Quick-action lever enables easy locking of the tailstock on the bed Digital spindle speed display included in the delivery scope Technical Specifications Centre distance: 1100 mm Swing over bed: 370 mm Copying turning diameter*: 160 mm Spindle speed min.: 500 rpm Spindle speed max.: 2000 rpm Number of speed ranges: stepless Spindle thread: M33x3.5 Tailstock taper: MK 2 Tailstock quill travel: 50 mm Copying length: 850 mm Motor power: 1.1 kW Bedpfxsytc R Re Af Ajdh Motor power S1 100%: 0.75 kW Voltage: 400 V Dimensions - width: 1650 mm Dimensions - depth: 750 mm Dimensions - height: 1150 mm Weight approx.: 92 kg Scope of delivery 300 mm tool rest 150 mm faceplate Rotating live centre Drive centre Copying device Basic tools Base