Used Firewood for sale (61)

Condition: used, Portable firewood saw for cutting up strips, branches and other waste wood. Technical data: - Length: 950 mm - Width: 600 mm - Cutting height: approx. 60 mm Crodjzryt Sepfx Abxsf - Motor: 2.2 kW - Connection: 16 A / 400 V

Condition: used, Portable firewood saw for cutting up strips, branches and other waste wood. Technical data: - Length: 950 mm - Width: 600 mm - Cutting height: approx. 60 mm - Motor: 1.5 kW - Power supply: 220 V Crjdpfx Abjzryt Eoxof

Condition: new, Year of construction: 2026, Maximize Profit with TRV 1200L and TRV 1600L: From Sawmill to Firewood TRV 1200L Ø550: Efficiency and Speed for Continuous Cutting Optimize waste management and turn production scraps into immediate economic value! The TRV 1200L Ø550, with its advanced design, is the ideal solution for sawmills needing to dispose of large amounts of multilaminate trims and log side sections. The result? A continuous and automated disposal process that converts waste into high-quality firewood. Key Features: Simplified handling: randomly load trims and waste onto the low-wear conveyor/roller VV. Smart clamping system: innovative technology allows processing of overlapping pieces of different shapes and thicknesses. Advanced precision: PLC-automated cutting system with timed length control of trimmed pieces. Independent sectors: equipped with 5 sectors, each with its own pneumatic cylinder and shock absorbers for maximum stability. Enhanced Safety: Advanced protection system: access door to moving parts with forced-lock safety micro-switch. Sealed, non-duplicable security key for exclusive access. Protective tunnel with sealed key and reinforced blade guard for superior safety. Rapid blade motor stop ( Crodpov Ip T Rofx Abxef

Condition: good (used), The scope of delivery includes: 02x Shelf uprights, used Material color: Sendzimir galvanized Upright profile: 85 x 75 x 2.00 mm Upright height: 1,455 / 1,300 mm Upright depth: 1,100 mm 04x Shelf crossbeams, used Material color: orange Beam profile: 120 x 50 mm Clear span: 2,700 mm 08x Locking pins, used Design: fully galvanized 03x Wire mesh grating, new Material color: Sendzimir galvanized Design: laid-on shelf grating, beveled on both sides Depth: (direction of supporting bar) approx. 1,125 mm for upright depth: approx. 1,100 mm Clear span: approx. 965 mm Width: approx. 885 mm Crossbeam support: approx. 65 mm Cedpfxodvgxij Abxerf Mesh size: approx. 95 x 45 mm Wire thickness: approx. 4.5 mm Maximum load capacity: up to 800 kg with evenly distributed load 03x Trapezoidal sheet metal, 2nd choice Exterior color: RAL 8012 reddish brown Interior color: similar grey-white Sheet length: 1,500 mm Sheet width: 1,075 mm Cover width: 1,035 mm Profile: 35 / 207 01x Verge angle, new Length: 3,000 mm Material color: RAL 8012 reddish brown Size: 100 x 100 mm Thickness: 0.75 mm Design: 90° bent 25x Screws 5.5 x 40 mm A2 Max. drilling capacity: 13 mm with 16 mm sealing washer, drill tip and ETA-13/0183 approval 06x Screws, 4.8 x 20 mm galvanized, self-tapping for wooden substructure Technical data for the firewood storage: Total width: approx. 2,900 mm Total depth: approx. 1,515 mm Total height: approx. 1,535 mm Storage volume: approx. 3.15 m³ Information: The images are example images to illustrate the construction. The material color of the shown uprights and crossbeams may differ. General information about the item: This item is only offered for collection. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: new, High-performance Firewood Processor with 20 Tons of Splitting Force - Brugger SA48 Pro! The Brugger SA48 Pro log splitter is the perfect solution for quickly and effortlessly processing logs with a diameter of up to 48 cm into high-quality firewood. Its well-thought-out yet simple design distinguishes this machine, which not only requires low maintenance but also facilitates repairs. This impressive device is equipped with either a powerful 14 HP Kohler petrol engine or a 9.5 kW 400V electric motor. The SA48 Pro does not rely on electronic control but is operated purely by mechanical components such as hydraulic valves with levers. Specifications: Maximum cutting length: 55 cm Maximum diameter: 48 cm Splitting force: 20 tons 55 cm bar Extra-wide 3.2 m conveyor belt Hydraulic feed up to the chainsaw Pivoting conveyor belt Automatic chain lubrication Despite its high splitting force and large diameter capacity, the log splitter remains relatively compact. Equipped with a drawbar, it can be attached to any trailer hitch, allowing for easy transportation. Additionally, two people can easily move the log splitter by hand on a flat surface without the need for a vehicle. The length of the firewood can be adjusted continuously up to 55 cm. The splitting wedge can be manually adjusted in different positions using a lever, allowing for 2-way, 4-way, or even 6-way splitting, depending on the thickness of the wood. Optional equipment such as the log lifter or chain conveyor further facilitates the work process. The chain conveyor allows for loading multiple logs using a forklift, crane, or front loader, eliminating the need to lift one log at a time. Cjdpfxepz I Nce Abxerf Prices: Brugger SA48 Pro: €9,749 6-way knife: €199 8-way knife : €299 Additional PTO drive (for electric or gasoline): €949 Log lifter: €1,498 Chain infeed log deck: €1,898

Condition: new, The Brugger SA38 impresses with an impressive splitting force of 12 tons and is the ideal solution for the quick and uncomplicated transformation of tree trunks into high-quality firewood. Logs up to 38 cm in diameter can be transformed into firewood with ease. The SA38 is characterized by its simple yet sophisticated design, which not only ensures high reliability, but also facilitates maintenance and repairs. Technical data - Up to 38cm diameter - Splitting power of 12 tons - 50cm Oregon sword - Log length from 20 - 50cm - Optional log lifter or chain conveyor - Weight 450kg Depending on your individual requirements, various drive options are available, a powerful 14 HP Kohler gasoline engine, a 7.5 kW 400V electric motor or a PTO drive with three-point linkage. Crodpspz I I Hjfx Abxef Prices Brugger SA38 - 5.499€ infeed conveyor 100cm - 590€ discharge conveyor 350cm - 895€ 6-way splitting knife - 199€

Condition: new, High-performance Log Splitter with 20 Tons of Splitting Force - Brugger SA48 Pro! The Brugger SA48 Pro log splitter is the perfect solution for quickly and effortlessly processing logs with a diameter of up to 48 cm into high-quality firewood. Its well-thought-out yet simple design distinguishes this machine, which not only requires low maintenance but also facilitates repairs. This impressive device is equipped with either a powerful 14 HP Kohler petrol engine or a 9.5 kW 400V electric motor. The SA48 Pro does not rely on electronic control but is operated purely by mechanical components such as hydraulic valves with levers. Specifications: Maximum cutting length: 55 cm Maximum diameter: 48 cm Splitting force: 20 tons 55 cm bar Extra-wide 3.2 m conveyor belt Hydraulic feed up to the chainsaw Despite its high splitting force and large diameter capacity, the log splitter remains relatively compact. Equipped with a drawbar, it can be attached to any trailer hitch, allowing for easy transportation. Additionally, two people can easily move the log splitter by hand on a flat surface without the need for a vehicle. Cedpfxslu Dc No Abxorf The length of the firewood can be adjusted continuously up to 55 cm. The splitting wedge can be manually adjusted in different positions using a lever, allowing for 2-way, 4-way, or even 6-way splitting, depending on the thickness of the wood. Optional equipment such as the log lifter or chain conveyor further facilitates the work process. The chain conveyor allows for loading multiple logs using a forklift, crane, or front loader, eliminating the need to lift one log at a time. Prices: Brugger SA48 Pro: €9,749 6-way knife: €199 8-way knife: €299 Additional PTO drive (for electric or gasoline) : €949 Log lifter: €1,498 Chain conveyor: €1,898

Condition: new, - new -Description:- Vertical design for splittingshort and meter logs- Robust and solid construction- Impact and scratch-resistant thanks to high-qualitypowder coating- Quick, tool-free splitting height adjustment- Low base plate for easy,{loading of large logs- Phase inverter on all 400 V models- Convenient transportation with manual drawbarthanks to standard chassis with largepneumatic wheels and additional support wheel- Space-saving storage thanks to easylowerable cylinder- Powerful industrial hydraulic system- Two-hand safety circuit- With splitting material holderTechnical data:Dimensions and weightsLength approx. 1050 mmWidth/depth approx. 1700 mmHeight approx. 2500 mmWeight approx. 282 kgDrivePTO speed 540 min¯¹Device dataSplitting force max. 23.4 tSplitting length min. 560 mmSplitting length max. 1100 mmSplitting material diameter min. 80 mmSplitting material diameter max. 350 mmHydraulic systemTank capacity hydraulic oil 24 . 5981023 Crsdpfsvxr Ryjx Abxef

Condition: as good as new (ex-display), functionality: fully functional, type of input current: three-phase, total width: 770 mm, total length: 1,030 mm, total height: 1,100 mm, input voltage: 400 V, saw blade diameter: 700 mm, working height: 700 mm, overall weight: 93 kg, Description: • Enclosed and secure saw area for increased safety, complying with legally mandated saw blade guard • Anti-twist device for logs thanks to punched-in retaining claws in the rocking table • Stable, torsion-resistant steel frame • Transport wheels for easy mobility • Impact, scratch, and weather resistant due to high-quality powder coating • Phase inverter Technical Data: Dimensions and Weight: Length (product) approx.: 1030 mm Width/Depth (product) approx.: 770 mm Height (product) approx.: 1095 mm Net Weight approx.: 92.5 kg Working height: 700 mm Rocking table support: 740 mm Drive: Drive type: Electric motor with direct drive Electrical Data: Connection voltage: 400 V Mains frequency: 50 Hz Output power: 3.835 kW Input power: 5 kW Noise emission: Sound pressure level Lp: 101 dB(A) Sound power level Lw: 115 dB(A) Saw blade: Saw blade circumferential speed: 51.3 m/s Saw blade diameter: 700 mm Cutting capacity: Max. cutting capacity, rocking table round timber: 250 mm Scope of delivery: 1 x carbide-tipped saw blade Ø 700 mm Crsdpjyddm Ujfx Abxef

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: Nr.50086, New machine for sale due to circumstances: 6 connection points with ventilation duct. Collection only! Price ex location 31637 Rodewald. Crodpfx Ajw Uf S Hsbxof

Condition: new, saw blade diameter: 1,000 mm, drive type: Elektro und Zapfwelle, The 40/20 CD+E saw-splitting machine cuts the log with a diameter of max. 40 cm with a circular saw blade and splits it with a splitting force of 20 tons. It is a combination machine (electric and PTO connection) Cjdpfjvukuiex Abxerf Demonstration and viewing possible by appointment - machine is currently in stock, available immediately

Condition: used, Holzkraft HSE 5-520 KH log splitter for the convenient and safe splitting of short logs for domestic or semi-professional use. Its compact design and ease of use enable efficient work even in confined spaces. Ideal for preparing firewood. Crjdpfszrx E Hox Abxsf Technical data: - Splitting force: 5 tonnes - Length of material to be split: max. 520 mm - Diameter of material to be split: max. 250 mm - Power source: 230 V electric - Weight: approx. 50 kg

Condition: good (used), total length: 1,380 mm, total width: 500 mm, total height: 2,000 mm, Technical data for the firewood rack: Rack system: Dexion Type: HI280 Technical data for installation: Number of rack rows: 01 unit Rack length: 1,380 mm Number of bays per rack row: 01 unit Number of shelves plus base level: 05 units Note: The rack is offered without firewood. The firewood is for decorative purposes only. Included in the scope of delivery: 02x Rack uprights, used Material color: Sendzimir galvanized Frame profile dimensions: 50 x 55 mm Adjustment grid: 25 mm Incl. mesh side panels Mesh size: 50 x 50 mm The uprights are pre-assembled 2,000 mm high 500 mm deep 05x Mesh grating shelf, used Material color: hot-dip galvanized Overall depth: approx. 482 mm (direction of the supporting bars) Crjdszrgxhopfx Abxof Overall width: approx. 1,270 mm (direction of the crossbars) Supporting bar dimensions: 20|1.80 mm Bearing: approx. 20 mm Frame height: approx. 20 mm Mesh size: 68 x 35 mm Weight/piece: approx. 6.72 kg 04x Shims, new Type: HI280 U-PL. STD 42X50X1.2 VZ Material color: Sendzimir galvanized 10x Shelf crossbars, used Overall length: 1,280 mm Z-profile: 52 x 25 mm Number of hooks: 02 units Weight/piece: approx. 0.84 kg Material color: Sendzimir galvanized 01x Cross brace, used Material color: Sendzimir galvanized 01x Load sign with information on bay and shelf loads, manufacturer and batch number Dimensions: 297 x 210 x 2 mm General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: new, Hydraulic winch for log splitters, cranes, mini excavators, tractors, agricultural vehicles, vineyards, horticulture, and many other applications. The hydraulic attachment winch simplifies many tasks. - Pull and position firewood for the log splitter - Pull logs onto trailers - Pull out tree stumps and trees - As an attachment winch for forestry cranes and small excavators - As a winch for small tractors and narrow-gauge tractors A robust steel construction with 3-sided mounting options (left, right, rear) with 12 threaded holes, offering many possibilities for attaching the winch (the threads are cut and painted; they must be recut with a tap before use due to the rust protection). A 20 m long and 6 mm thick steel cable is installed. A large cable pulley ensures a long service life for the steel cable. We install hydraulic motors from 50 to 630 ccm (standard = 400 ccm), depending on the required speed and pulling force. Maximum working pressure: 225 bar peak Continuous operating pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Torque in continuous operation: 380 Nm Csdpfxodf Ud So Abxsrf Maximum pulling force: 1700 kg Weight: 49 kg Cable speed: 47 m/min at 60 l/min of hydraulic oil Color: red Dimensions: Length: 500 mm Length with swivel: 570 mm Front width: 120 mm Rear width: 180 mm Bearing width: + 30 mm Motor width: + 200 mm Height: 250 mm The winch is available for mounting or welding. This version comes with a manual hydraulic valve and hoses to the motor. Article number: HAW1700-HV NOTE: Figures 2, 3, and 4 are examples of mounting options!

Condition: new, Hydraulic winch HAW1700 with electric valve incl. manual operation and radio remote control for mounting on wood splitters, cranes, mini excavators, tractors, forklifts, mowing tracked vehicles, and telescopic loaders, for use in viticulture and horticulture, agriculture, construction, and forestry, as well as many other applications. Equipped with an electric hydraulic valve and radio remote control. The hydraulic winch HAW1700 can simplify many tasks. Maximum rope capacity of 30 m with 6 mm wire rope. Standard equipment includes 20 m of 6 mm wire rope. ⦁ Pull and position firewood for the wood splitter ⦁ Pull logs onto a trailer ⦁ Pull out tree stumps and trees ⦁ As an auxiliary winch on skidders and small excavators ⦁ As a winch for small tractors and narrow-gauge tractors A robust steel construction with the possibility of mounting on both sides (bottom, rear, top) with M12 threads. Credpfx Abofn Tvhoxef This allows for flexible use of the winch. Large, double-bearing rope pulley for long wire rope life. The pulling force is 1700 kg as standard. The winch can be installed in various positions. An optional hydraulic brake is available. Depending on the required pulling speeds and forces, we can offer you different options. Please contact us, and we will be happy to advise you. ⦁ Maximum working pressure: 225 bar peak ⦁ Continuous operating pressure: 175 bar ⦁ Displacement: 400 ccm ⦁ Torque at 225 bar: 870 Nm peak ⦁ Torque in continuous operation: 380 Nm ⦁ Maximum pulling force: 1700 kg ⦁ Weight: 49 kg ⦁ Rope speed: 47 m/min at 60 l/min oil flow ⦁ Color: red ⦁ Including hoses from the valve to the motor Dimensions: ⦁ Length: 500 mm ⦁ Length with rope inlet: 570 mm ⦁ Front width: 120 mm ⦁ Rear width: 180 mm ⦁ Bearing width: +30 mm ⦁ Motor width: +200 mm ⦁ Height: 250 mm Included: Radio remote control for the winch. ⦁ Control range: up to 100 m ⦁ Temperature: -35 °C to +80 °C Protection class: IP65

Condition: new, Hydraulic winch for log splitters, cranes, mini excavators, tractors, agricultural vehicles, viticulture, horticulture, and many other applications. The hydraulic auxiliary winch can simplify many tasks: - Pulling and positioning firewood to the log splitter - Pulling logs onto trailers - Pulling out tree stumps and trees - As an auxiliary winch on forestry cranes and small excavators - As a winch for small tractors and narrow-track tractors A robust steel construction with 3-sided mounting options (left, right, rear) with 12 threaded holes offers many possibilities for attaching the winch (the threads are cut and painted. They must be re-tapped with a tap before use due to the rust protection). A 20 m long and 6 mm thick steel cable is installed. Large cable pulley for long service life of the steel cable. We install hydraulic motors from 50 to 630 ccm (standard = 400 ccm), depending on the required speed and pulling force. Maximum working pressure: 225 bar peak Continuous operation pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Torque in continuous operation: 380 Nm Maximum pulling force: 1700 kg Weight: 49 kg Cjdpfx Abodf Ufdsxjrf Cable speed: 47 m/min at 60 L/min hydraulic oil Color: red Dimensions: Length: 500 mm Length with swivel: 570 mm Front width: 120 mm Rear width: 180 mm Bearing width: + 30 mm Motor width: + 200 mm Height: 250 mm The winch is available for mounting or welding. This version includes an electric hydraulic valve and hoses to the motor. Article number: HAW1700-EV NOTE: Figures 2, 3, and 4 are mounting examples!

Condition: new, functionality: fully functional, Cone splitter Excavator splitter Drill cone splitter Wood splitter KS4 Drill cone 200x400 - Made in Germany The powerful cone splitter for attachment to mini-excavators, excavators, wheel loaders, tractors, skidders and many other options. The drill cone can be exchanged for various tools such as a root cutter, auger, hummus sieve, concrete mixing drum, weed broom and many other attachments. The cone splitter consists of a very sturdy drive unit and the drill cone (splitting cone) The drill cone is completely hardened. It is not made of unhardened steel as is the case with many other manufacturers. It can be converted to other tools in just a few simple steps. - Cone splitter - Root cutter - Earth auger - Weed brush - Sweeping broom - Rotary harrows NO CHINA GOODS ! WE PRODUCE IN GERMANY ! THE ideal multi-purpose tool for foresters, farmers, gardeners, do-it-yourselfers and professionals Overall length 600 mm plus attachment and interchangeable system Universally applicable in construction, forestry, agriculture and horticulture For splitting heavy firewood or wood for wood chips For drilling holes in the ground, for stakes, plants and much more For removing rootstocks and tree stumps For cleaning trenches and paved areas For levelling garden areas and creating a fine soil structure You simply do the work from the excavator without any further assistance. A very solid and stable steel construction enables you to work hard and for a long time. Credpjupiapjfx Abxef In addition to the motor, the shaft is supported by 2 sturdy tapered roller bearings to protect against tension and pressure. The tapered roller bearings can be lubricated for a long service life. A powerful HMT 400 hydraulic motor with up to 1,600 Nm gives you the necessary torque for efficient work, from 25 l/min up to 125 l/min and 210 bar pressure Weight 70 kg included: - Drive unit with powerful HMT hydraulic motor, weight 70 kg - Drill cone with tip Ø 200 mm 270 mm/400 mm long, 6xM16 thread LK173 on the front side Total length 270 mm + drill cone tip 130 mm = 400 mm Diameter 200 mm Weight 30 kg Total weight 100 kg

Condition: new, functionality: fully functional, rope length: 30,000 mm, rope speed: 47,000 mm/min, machine/vehicle number: HAW1700-EV-Funk, Hydraulic winch for wood splitters, cranes, mini excavators, tractors, agricultural vehicles, viticulture, horticulture, and many other applications. The hydraulic attachment winch simplifies many tasks: - Pulling and positioning firewood to the wood splitter - Pulling logs onto trailers - Removing tree stumps and roots - As an attachment winch on forestry cranes and small excavators - As a winch for small tractors and narrow-gauge tractors A robust steel construction with 3-sided mounting options (left, right, rear) and 12 threaded holes offers many possibilities for attaching the winch (threads are cut and painted. They need to be re-cut with a thread tap before use due to the rust protection). A 20 m long and 6 mm thick steel cable is mounted. A large cable pulley ensures a long service life for the steel cable. We mount hydraulic motors from 50 to 630 cc (standard = 400 cc), depending on the speed and pulling force required. Maximum working pressure: 225 bar peak Continuous operating pressure: 175 bar Displacement: 400 cc Torque at 225 bar: 870 Nm peak Torque in continuous operation: 380 Nm Maximum pulling force: 1700 kg Weight: 49 kg Cable speed: 47 m/min at 60 L/min hydraulic oil Color: red Dimensions: Length: 500 mm Length with swivel: 570 mm Front width: 120 mm Rear width: 180 mm Bearing width: + 30 mm Motor width: + 200 mm Height: 250 mm The winch is available for mounting or welding. This version includes an electric hydraulic valve, remote control, and hoses to the motor. Article number: HAW1700-EV-Funk Credpedf Ufpofx Abxsf

Condition: new, functionality: fully functional, Year of construction: 2024, overall weight: 100 kg, total height: 1,000 mm, color: red, continuous operating pressure: 210 bar, spindle torque (max.): 1,800 Nm, Equipment: hydraulics, Cone splitter Excavator splitter Drill cone splitter Wood splitter KS5 Drill cone 200x400 - Made in Germany The powerful cone splitter for attachment to mini-excavators, excavators, wheel loaders, tractors, skidders and many other options. The drill cone can be exchanged for various tools such as a root cutter, auger, hummus sieve, concrete mixing drum, weed broom and many other attachments. The cone splitter consists of a very stable drive unit and the drill cone (splitting cone) The drill cone is completely hardened. It is not made of unhardened steel as is the case with many other manufacturers. It can be converted to other tools in a few simple steps. - Cone splitter - Root cutter - Earth auger - Weed brush - Sweeping broom - Rotary harrows NO CHINA GOODS ! WE PRODUCE IN GERMANY ! THE ideal multi-purpose tool for foresters, farmers, gardeners, do-it-yourselfers and professionals Overall length 600 mm plus attachment and interchangeable system Cjdeuph Uxopfx Abxerf Universally applicable in construction, forestry, agriculture and horticulture For splitting heavy firewood or wood for wood chips For drilling holes in the ground, for stakes, plants and much more For removing rootstocks and tree stumps For cleaning trenches and paved areas For levelling garden areas and creating a fine soil structure You simply do the work from the excavator without any further assistance. A very solid and stable steel construction enables you to work hard and for a long time. In addition to the motor, the shaft is supported by 2 sturdy tapered roller bearings to protect against tension and pressure. The tapered roller bearings can be lubricated for a long service life. A powerful HMT 500 hydraulic motor with up to 1,800 Nm gives you the necessary torque for efficient work, from 25 l/min up to 125 l/min and 210 bar pressure Weight 70 kg included: - Drive unit with powerful HMT hydraulic motor, weight 70 kg - Drill cone with tip Ø 200 mm 270 mm/400 mm long, 6xM16 thread LK173 on the front side Total length 270 mm + drill cone tip 130 mm = 400 mm Diameter 200 mm Weight 30 kg Total weight 100 kg

Condition: new, Year of construction: 2026, CORMAK LUP16 Log Splitter – Professional 16-Ton Vertical Hydraulic Wood Splitter The CORMAK LUP16 is a professional vertical hydraulic log splitter designed for intensive use in farms, sawmills, and wood processing facilities. Thanks to its robust construction, high operating performance, and a hydraulic cylinder generating 16 tons of splitting force, the machine easily handles large-diameter logs. This reliable hydraulic wood splitter combines efficiency with precise operation, making it an excellent solution for continuous-duty applications. Main advantages of the machine 16-ton splitting force – efficiently splits hard, wet, and seasoned wood with large diameters. Vertical working design – optimised for heavy logs and provides ergonomic operation. Hydraulic system with overload protection valve – protects the pump and hydraulic system against excessive loads. High-performance gear pump – ensures consistent oil flow and reliable long-term operation. Adjustable splitting speed – allows precise adjustment depending on the type of wood (from 4.6 to 14.2 cm/s). Log lifting system – makes positioning heavy logs under the wedge easier and reduces physical effort. Design and technology The CORMAK LUP16 splitter is built on a robust steel frame with increased resistance to deformation, while all working components are designed for continuous operation. The angled splitting wedge improves penetration into the wood, reducing the splitting cycle time. The machine is powered by a three-phase 4.5 kW (400 V) electric motor, providing sufficient power for intensive splitting of thick and hard wood. Precision and work efficiency The LUP16 model allows processing logs up to 1100 mm in length and 700 mm in diameter, making it a versatile solution for a wide range of applications. The 948 mm wedge stroke ensures complete splitting in a single cycle. The adjustable splitting speed range of 4.6–14.2 cm/s and return speed of 6.2 cm/s allow the operator to optimise performance for maximum productivity. Applications The CORMAK LUP16 electric log splitter is designed for: Firewood production companies Municipal services and forestry operations Agricultural farms Professional individual users Woodworking workshops and processing plants The machine is suitable for various types of wood, from softwood species to hard deciduous timber, including both fresh and seasoned logs. Standard equipment Hydraulic gear pump Log lifting system Angled splitting wedge Overload protection valve 5-pin industrial power connector Optional equipment Four-way splitting wedge for dividing logs into four pieces Technical specifications Parameter Value Splitting force 16 tons Minimum log diameter 80 mm Maximum log diameter 700 mm Minimum log length 350 mm Maximum log length 1100 mm Splitting speed (continuously adjustable) 4.6–14.2 cm/s Return speed 6.2 cm/s Wedge stroke length 948 mm Motor power 4.5 kW Voltage 400 V Hydraulic tank capacity 18 l Hydraulic system pressure 27.7 MPa Dimensions 1050 × 1550 × 2500 mm Cjdpfxsuqiq Do Abxerf Weight approx. 259 kg

Condition: new, Year of construction: 2026, CORMAK LUP14 Vertical Log Splitter – Compact Professional Power with 14 Tons of Splitting Force for Intensive Work The CORMAK LUP14 log splitter is a powerful hydraulic wood splitter designed for professional applications such as forestry farms, firewood yards, and wood processing facilities. With a splitting force of 14 tons, the LUP14 model efficiently handles logs up to 1040 mm in length and 700 mm in diameter. It is a reliable work tool for companies involved in professional firewood production and processing. Main advantages of the machine 14-ton splitting force – enables efficient splitting of large and hard logs. Stable vertical construction – designed for working with large logs in an ergonomic position. Adjustable working speed (4.2–21.8 cm/s) – allows precise adjustment to the type of processed wood. Log lifting system – significantly simplifies handling heavy logs and reduces operator effort. Two-hand lever operation – minimizes accident risks and complies with high safety standards. Transport wheels – allow quick and convenient movement of the machine within the workplace or for transport. Construction and technology The CORMAK LUP14 electric wood splitter is built on a reinforced steel frame that ensures durability and resistance to deformation under high pressure. The working system consists of a hydraulic cylinder with an internal/external diameter of 80/90 mm and a reliable hydraulic pump that maintains stable operating pressure in all conditions. The machine is powered by a 400 V supply via a 14P5 industrial socket, while the drive is provided by a 3.5 kW electric motor. The robust hydraulic system guarantees smooth operation and long service life even during intensive use. Precision and work efficiency Thanks to its optimized hydraulic system and durable construction, the CORMAK LUP14 provides efficient and repeatable performance when processing firewood. The adjustable feed speed range from 4.2 cm/s to 21.8 cm/s allows the machine to be adapted to different working conditions – from hard hardwood species to fresh softwood. Applications The LUP14 vertical hydraulic wood splitter is designed for: agricultural and forestry farms, firewood processing yards, municipal companies, wood processing plants, professional individual users. It efficiently handles logs with various dimensions, making it suitable both for seasonal firewood production and continuous professional operation. Crsdpfx Aboridp Eoxef Standard equipment Hydraulic pump Transport wheels Log lifting system Two-hand control system 14P5 power socket Optional equipment Four-way splitting wedge Technical specifications Parameter Value Motor power 3.5 kW / 400 V Splitting force 14 tons Cylinder diameter (inner/outer) 80 / 90 mm Maximum log length 1040 mm Approximate log diameter range 100–700 mm Overall dimensions 1440 × 1350 × 2280 mm Weight 185 kg

Condition: new, Year of construction: 2026, CORMAK LUP7T WOOD SPLITTER is an electric log splitter with a 7-ton splitting force, designed for preparing firewood and fuel wood. The model handles logs up to 520 mm in length and up to 250 mm in diameter, making it well-suited for home use. The device is equipped with a 230 V / 2200 W motor, a hydraulic cylinder with automatic return, two-hand operation system, a safety cage protecting the working area, and a stand with wheels included in the set. Check the CORMAK LUP7T if you need a compact 230 V wood splitter for regular firewood preparation at home. Applications of the CORMAK LUP7T wood splitter The CORMAK LUP7T wood splitter is suitable wherever firewood is prepared regularly, but there is no need for a large industrial machine or a version with a stand. Recommended applications: households farms homes heated with wood fireplace and stove users small firewood preparation points Crjdpfx Abozarp Njxjf agritourism facilities and guesthouses workshops and utility areas users preparing seasoned and fresh wood The LUP7T model is suitable for people who want to prepare firewood faster and more conveniently, reducing the effort of manual splitting. Who is the 7-ton wood splitter for? The CORMAK LUP7T is a splitter for users who need a compact, easy-to-use device for firewood. The 7-ton splitting force, 230 V power supply, and compact design without a stand make it suitable for use at home, on a farm, or in a small service point. It is a good choice for: homeowners heating with wood fireplace users farms preparing their own fuel people wanting to reduce manual splitting small businesses and facilities regularly using firewood users looking for easier storage compared to stand-mounted versions The CORMAK LUP7T is equipped with a two-hand control system, which increases control over the splitting process. The operator uses both hands, reducing the risk of accidental contact with the working area. An additional safety feature is a protective cover over the working area. This is especially important when the splitter is used regularly and the operator wants a safer and more controlled working environment. Smooth adjustment of splitting gap The splitter has a smooth adjustment of the splitting gap, allowing better adaptation to the length of the wood being processed. This helps reduce unnecessary movement and speeds up the preparation of logs. This is particularly useful when working with repetitive pieces of wood, e.g. for fireplaces, stoves, or boilers. Technical parameters of CORMAK LUP7T: Splitting force: max. 7 T Max. log diameter: 250 mm Max. log length: 520 mm Motor: 230 V / 50 Hz Motor power: 2200 W Power supply: mains Length: 950 mm Width: 325 mm Height: 510 mm Warranty: 2 years Stand: not included Standard equipment CORMAK LUP7T hydraulic wood splitter Hydraulic cylinder with automatic return Two-hand control system Protective cover for working area Stable splitting blade 230 V / 2200 W motor Powder-coated steel construction

Condition: new, Year of construction: 2026, CORMAK LUP7TS WOOD SPLITTER is an electric log splitter with a 7-ton splitting force, designed for preparing firewood and fuel wood. The model handles logs up to 520 mm in length and up to 250 mm in diameter, making it well suited for home use. The device is equipped with a 230 V / 2200 W motor, a hydraulic cylinder with automatic return, two-hand operation, a safety cage protecting the working area, and a stand with wheels included in the set. Check the CORMAK LUP7TS if you need a compact 230 V wood splitter for regular firewood preparation at home. Applications of the CORMAK LUP7TS wood splitter The CORMAK LUP7TS wood splitter is suitable wherever firewood is prepared regularly, but there is no need for a large industrial machine or a version with a stand. Recommended applications: households farms homes heated with wood fireplace and stove users small firewood preparation points agritourism facilities and guesthouses workshops and utility areas users preparing seasoned and fresh wood The LUP7TS model is suitable for people who want to prepare firewood faster and more conveniently, reducing the effort of manual splitting. Who is the 7-ton wood splitter for? The CORMAK LUP7TS is a splitter for users who need a compact, easy-to-use device for firewood. The 7-ton splitting force, 230 V power supply, and compact design without a stand make it suitable for home use, farms, or small service points. It is a good choice for: homeowners heating with wood fireplace users farms preparing their own fuel people wanting to reduce manual splitting small businesses and facilities regularly using firewood users looking for easier storage than stand-mounted versions The CORMAK LUP7TS is equipped with a two-hand control system, which increases control over the splitting process. The operator uses both hands, reducing the risk of accidental contact with the working area. An additional safety feature is a protective cover for the working area. This is especially important when the splitter is used regularly and the operator wants a safer and more controlled working environment. Smooth adjustment of splitting gap Codpozarv Ajfx Abxsrf The splitter has a smooth adjustment of the splitting gap, allowing better adaptation to the length of the wood being processed. This helps reduce unnecessary movement and speeds up the preparation of logs. This is particularly useful when working with repetitive pieces of wood, e.g. for fireplaces, stoves, or boilers. Standard equipment CORMAK LUP7TS hydraulic wood splitter Stand with wheels Hydraulic cylinder with automatic return Two-hand control system Protective cover for working area Log output table Stable splitting blade 230 V / 2200 W motor Powder-coated steel construction Technical parameters of CORMAK LUP7TS: Splitting force: 7 T Max. log diameter: 250 mm Max. log length: 520 mm Motor: 230 V / 50 Hz Motor power: 2200 W Power supply: 230 V Length: 950 mm Width: 325 mm Height: 510 mm Net / gross weight: 63 / 68 kg Warranty: 2 years

Condition: excellent (used), VOLLMER model CNS sharpening machine for firewood saws (CV) Credpfx Abotwm Uusxof

Condition: new, Year of construction: 2026, CORMAK PD0700 Tilting Rocking Circular Saw The CORMAK PD0700 is a professional tilting rocking circular saw designed for efficient and safe cutting of firewood and various wooden materials. Equipped with a powerful 400 V motor and a large Ø700 mm carbide-tipped saw blade, the machine delivers high cutting accuracy, repeatability, and reliable performance. Thanks to its compact design and mobile chassis, the PD0700 is ideal for both workshop applications and private farm use. Key Features Professional Ø700 mm carbide-tipped blade with 64 teeth – enables fast and precise cutting of logs with diameters up to 280 mm. Heavy-duty steel construction – ensures durability, stability, and safe operation even under intensive working conditions. Large transport wheels and transport lock – allow easy movement of the machine and provide stability during operation. Electronic motor brake – significantly reduces blade stopping time, improving operator safety. Crjdpfswtp Rljx Abxsf Phase converter/switch – simplifies machine start-up in three-phase installations without requiring modifications to the power supply system. Fully assembled and ready for operation upon delivery – no time-consuming installation required. Construction and Technology The PD0700 rocking saw is built on a rigid steel frame designed to withstand deformation and dynamic loads during operation. The rocking cradle-type cutting system minimizes vibration and provides excellent control over the movement of the material being cut. A stable work table and integrated safety supports ensure accurate positioning of timber while preventing unwanted movement. The large carbide-tipped blade, mounted on a robust spindle assembly, minimizes power losses and provides extended tool life. Precision and Performance High cutting accuracy is achieved through smooth material guidance and optimized operating parameters, including a blade speed of 1,400 rpm. The powerful motor (S6: 6.1 kW) enables efficient cutting of both hardwood and dry timber without loss of performance. Operational efficiency and user safety are further improved by the integrated electronic brake and factory-installed blade guards. Applications The CORMAK PD0700 rocking circular saw is suitable for: Preparing firewood in private households and farms Carpentry workshops and craft businesses Municipal and service companies involved in wood processing Agricultural and forestry applications requiring fast and safe timber cutting Standard Equipment Ø700 mm original carbide-tipped saw blade Blade replacement tools Transport lock Electronic motor brake Phase converter/switch Optional Equipment Adjustable length stops for cutting specific timber lengths Transport and storage covers Technical Specifications Specification Value Maximum Blade Diameter / Bore 700 × 30 mm Maximum Timber Diameter 280 mm Maximum Timber Width 290 mm Blade Speed 1,400 rpm Total Motor Power S6: 6.1 kW / S1: 5.0 kW Power Supply 400 V Weight 98 kg Dimensions (H × W × L) 1170 × 770 × 1070 mm Wheel Track Width 650 mm CE Declaration Yes