Optical Measurement System

Keyence IM-6120

Condition: used, Year of construction: 1994, Technical details: number of spindles: 8 spindle passage: 32 mm Dodpfx Ael Su Rxjfpsun Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: AF32 S DNT Yob: 1994 Eight-spindle automatic lathe with 8 main spindles max. nominal diameter D=32mm control: Siemens SIMATIC S7 electronic cam control Balluff gripper in position 8 for backworking CNC cross slide position 6 CNC cross slide position 7 Workpiece belt Coolant cooling Schimpke Chip conveyor with magnetic separator Tapping couplings The tooling shown may differ from the scope of delivery! Please, contact us for getting more information and pictures on mail(at) or *

Condition: like new (used), Year of construction: 2017, Clamping force: 25 ton Version: Shuttle table Opening force/stroke min.- max. : 100/225 mm Mould height variable min.- max. : 122-222 mm Shuttle table stroke: 500 mm Wight on shuttle table. max. :120 kg Ejector force/stroke max. : 16/40 kN/mm Dsdeu Epy Nspfx Afpeun Screw: 22 mm Effective screw length L/D : 20 Screw stroke max. : 90 mm Stroke volume: 34 cm3 Shot weight: 31 g Injection pressure: 2.000 bar Working hours: 12.500 h

Condition: used, Year of construction: 1987, Technical details: number of spindles: 8 Duedpfjmf Aw Aox Afpon

Year of construction: 2018, condition: ready for operation (used), A high-precision Takisawa CNC lathe with double spindles is available. Spindle power: 2x 7.5kW, speed: 5000rpm, spindle nose: F-80, tool holder: 2x 5 places, max. turning diameter: 50mm, max. turning length: 50mm, max. workpiece weight: 2x 0.5kg. Machine dimensions X/Y/Z: approx. 2600mm/2550mm/2150mm, weight: approx. 4300kg, control: 2x Fanuc Oi-TF, operating hours: 11179h. Including hinged belt conveyor to the rear, automatic central lubrication, machine cladding with coolant pump, portal loader type D, Raku Raku loader, turning station, automatic loading and unloading door per spindle and storage chute for test part. Documentation available. On-site inspection is possible. Duedpfx Afsu Dm Izjpon

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036936, clamping force: 800 kN, screw diameter: 35 mm, displacement volume: 135 cm³, injection pressure: 1,837 bar, injection weight: 123 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,820 mm, overall weight: 5,900 kg, heating capacity: 8.9 kW (12.10 HP), drive type: Vollelektrisch, clear span: 470 mm, tool weight: 6,00,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 250 PA G01 (order 38670013) (machine no.: 61036936, new, year of manufacture 2023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions Dujdpouggb Dofx Afpen CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 35 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1837  Stroke volume cm³ 135  Shot weight at max. stroke for PS g 123  Injection speed mm/s 200  Injection flow rate cm³/s 192  Screw drive/speed 1/min 382  Plasticizing flow (standard screw)4) g/s 19.5  Nozzle contact force kN 30 ELECTRICAL PARAMETERS  Connected load kW 17.8  Installed heat output kW 8.9  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.9  Length x width x height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Electrical preparation for hydraulic auxiliary unit  Euromap interfaces handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package  Swivel device Injection unit The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: new, Year of construction: 2023, operating hours: 50 h, Brand: Dr.Boy Model: 60E Year of construction: 2023 Operating hours: 50 Screw diameter: 32 mm Max. injection pressure: 2,142 bar Max. shot volume: 100.5 cm³ Clamping force: 60 t Max. distance between tie-bars: 360 x 335 mm Min. mould height: 250 mm Max. distance between platens: 650 mm Dimensions: 3,450 x 1,150 x 1,950 mm Weight: 2,250 kg Options: • Procan ALPHA 4 display • Hydraulic core pull (2x) • Air valve (2x) • Interface package (incl. RS232/485, OPC-UA + licence fee) • 4 Freely programmable AIO's • Robot interface Euromap 67 • Interface between safety fence and machine Euromap 78 • Colouring contact interface • Quick change mould package – Cooling circuits (3x) on fixed and moving platen – 8-way water manifold Dedpfx Asx Aphtefpeun – Ejector with quick coupling – Open nozzle with threaded tip • 6-way energy distribution box (supply via second cable) – 3x 400V – 3x 220V • Oil filling (Econfluid, ISO-32)

Condition: ready for operation (used), Year of construction: 2019, Light sources: Observation light source: LED ring light (red, blue, green), Measurement light source: White LED, Control unit: VR-5000, Magnification (in relation to a 15-inch monitor): 12x-160x. Measuring ranges max. horizontal/vertical: 24mm/18mm, Measuring resolution: 0.1µm, Height measuring range: 1mm-50mm, Repeatability (σ): 0.4µm, Measuring accuracy: ±2.5µm. Dusdpsti Adqjfx Afpen

Year of construction: 2010, condition: ready for operation (used), One CNC lathe Takamaz X180 available. Turning diameter: 210mm, turning length: 230mm, spindle bore: 51mm, speed: 3500rpm, number of axes: 3, tool positions: 12, chuck size: 8inch (Kitagawa B208, 200mm), control: Fanuc 0i-TC, weight: approx. 4000kg. Dsdotqfq Hopfx Afpjun

Condition: used, Year of construction: 1993, Technical details: number of spindles: 8 spindle passage: 32 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Dedpfergt E Rjx Afpsun Type: AF32 Dnt Yob: 1993 eight-spindle automatic lathe eight main spindles for bars up to D=32mm Modernized control: Siemens Sinumerik Motors: renewed modern motors suitable for modernized control system Electronic trip dog control: Balluff CNC cross slide position 5 cross CNC cross slide position 6 cross Preparation for gripper in position 8 (gripper optional) Independent feeds Thread cutting couplings integrated bar loader: Pietro CUCCHI; type: rack type magazine The scope of delivery regarding the tooling equipment could be different like pictures. *

Year of construction: 2020, condition: ready for operation (used), Clamping force: 400kN, max. opening force: 130kN, max. opening stroke: 350mm, min. mold height: 200mm, max. platen distance: 550mm, tie bar distance: 270mm/270mm, max. moving mold half: 180kg, ejector stroke: 125mm, ejector force: 30kN, injection unit: Euromap 70, screw diameter: 22mm, injection pressure: 2500bar, weight: approx. 2200kg, operating hours: approx. 12400h. Documentation available. An on site inspection is possible. Djdsx E Acxopfx Afpoun