Used Holzma Hpp for sale (75)

Condition: used, Year of construction: 2005, Used machine Year of manufacture: 2005 Fence on the left side Hnsdpfxsz Rrb Dj Akrou Cutting length: 4300 mm Cutting width: 4300 mm Saw blade overhang: 95 mm Motor: 13.5 kW Saw blade diameter, max.: 380 mm With scoring unit Feed rate, max.: 130 m/min With label printer With 7 clamping chucks With veneer trimming stops Control system: Holzma Cadmatic 4.0 professional Availability: approximately July 2027 Location: North Rhine-Westphalia

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, cutting dimensions: 3800x3800mm cutting height: 95mm beam feed rate with clamps: 90m/min Hedpfszuk Swjx Akrjnu cutting speed: up to 150m/min, steplessly adjustable main motor power: 13.5kW trimming motor power: 2.2kW blade diameter: 350mm 4 air tables extraction requirement: 3800m3/h external dimensions: 6500x7700mm 16255 hours

Condition: ready for operation (used), Year of construction: 2008, Holzma automatic panel saw PROFI HPP 510/56/56/P Year: 2008 Technical data Hodpoz Iliujfx Akronu Positioning accuracy +/- 0.1 mm 5 air cushion tables, 2,810 x 650 mm 1 fan, adjustable pressure Cutting length: 5,600 mm Cutting width (pusher travel): 5,600 mm 11 combination profile rails, dual-track 9 clamps, two-finger type Max. cutting height: 125 mm Saw carriage feed (forward): 0.1 – 150 m/min Saw carriage feed (return): constant 150 m/min Pusher feed (forward/return): max. 90 m/min 11 combination profile rails, dual-track Max. forward speed of 25 m/min is mandatory within the EU Automatic pressure beam height control Main saw motor (frequency-controlled): 21 kW Speed: 1,700 – 4,200 rpm Scoring saw motor: 2.2 kW Operating voltage: 400 V / 50 Hz (+10 / -5%) Connected load: 30 kW Working height: 1,020 mm Main saw blade: 450 x 4.8 x 60 mm Scoring saw blade: 180 x 4.8 – 5.8 x 45 mm Compressed air: 6 bar Air consumption: 210 NL/min (approx., at extraction port) 30 – 32 m/s Negative pressure: 1,200 Pa Extraction volume: 5,800 m³/h Chip duct connection: 1 x 200 mm Pressure beam connection: 2 x 150 mm Quality standards: CE tested, GS tested, FPH dust-tested. Stock no.: 2003040BX

Condition: good (used), Year of construction: 2003, Maximum cutting Width : 4300 mm Maximum cutting Lenght : 4300 mm Maximum cutting hight : 95 mm Main engine : 13,5 Kw Scoring unit : 2,2 Kw Saw carridge feed rate : Variable 1 - 150 m/min Hodoz Hx Egjpfx Akrjnu Pusher feed rate : up to 90 m/min Control system : CADmatic 4.0 4 x air table in front of the machine Machine is dismantled and ready to load

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 0-243-02-2974, functionality: fully functional, operating hours: 3,566 h, The equipment was purchased new in 2007 for its current location. Hnjdpfx Akszcn Ndsrju The factory ceased operations in 2016, and the equipment has not been used since then. The equipment is available for purchase as-is or fully dismantled and loaded onto a truck. The machine has only 3566 hours on it. Prize request of the machine wholeness shows in advertising is 24.500 € vat 0 % Dismantling, packing, and loading to trailer can be offered with 2.680 € vat 0 % Do not hesitate to contact for more information.

Condition: used, Year of construction: 2001, functionality: fully functional, power: 13.5 kW (18.35 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 125 mm, cutting width (max.): 3,200 mm, saw blade diameter: 450 mm, Equipment: CE marking, scorer, We are offering this used Holzma HPP 11/32 panel saw, year of manufacture 2001. Manufacturer: Holzma Model: HPP 11/32 Year of manufacture: 2001 The machine is in perfect working condition. Complies with CE safety standards. Automatic panel saw for chip-free and precise cutting of coated and uncoated boards made from wood-based materials and those that can be processed like wood-based panels. Rear machine table equipped with the appropriate number of combi-profile rails with rollers for easy and gentle handling of panels. Machine table features extensive, abrasion-resistant table supports, which are recessed at the clamping jaw positions. This ensures lasting table stability and consistent cutting quality. Saw blade feed direction: from left to right against the square fence. Technical specifications: Main saw motor: 13.5 kW Hnsdpjyxqigefx Akrju Scoring saw motor: 2.2 kW Max. clamping jaw opening: 130 mm Saw blade diameter: 450 mm Saw blade projection: 125 mm Saw carriage feed rate, forward: 5–100 m/min Return feed rate: constant 100 m/min Program carriage feed speed, forward/return: max. 80 m/min Compressed air: 6 bar Operating voltage: 400 V / 50 Hz Minimum extraction speed at extraction nozzle: approx. 28 m/sec Chip extraction connection: 1 x 200 mm Pressure beam extraction connection: 1 x 160 mm Minimum operating temperature: +5°C Maximum operating temperature: +35°C Cutting length: 3,200 mm Cutting width: 3,200 mm Dismantling and collection to be organized by buyer. Location for collection: A-8265 Kroisbach an der Feistritz If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, operating hours: 11,900 h, Cutting dimensions: 4300x4300 mm Blade diameter: 350 mm Label printer Total power: 20.9 kW Maximum cutting speed – 130 m/min, steplessly adjustable Maximum pusher speed – 90 m/min Maximum cutting height – 80 mm Four air tables Automatic scorer adjustment Year of manufacture – 2014 Operating hours – 11,900 Hsdpfx Ajzz N Nbjkrsnu

Condition: excellent (used), Year of construction: 2011, HOLZMA PROFILINE HPP 380 Cutting Data Cutting length: 4,300 mm Cutting width (program pusher travel): 4,250 mm Saw blade projection: 95 mm Combi and Clamping Jaw System Combi profile rail element, 2-track: 9 pieces Clamping jaws: 7 pieces Spacing: 75/275/475/1,050/1,850/2,650/3,450 mm Hodpfx Aex Nf E Rjkrsnu Manual trimming stops on clamping jaws: 4 pieces (positions 75/475/1,050/2,650 mm) Air Cushion Tables and Extraction Air cushion table with roller element 2,160 x 650 mm: 4 pieces Central blower: 1 piece Air cushion table nozzle manifold: 70 x 70 mm Feed and Program Pusher Saw carriage feed forward: 1–130 m/min Saw carriage feed backward: constant 130 m/min Program pusher speed forward: 80 m/min Program pusher speed backward: 80 m/min

Condition: used, Year of construction: 2008, Panel dividing saw Manufacturer: Holzma Type: HPP 350/43/38 Year of manufacture: 2008 Technical data - Control system: CADmatic 4 - Optimization program: CAD-Plan 4 - Saw blade overhang: 80 mm Hnedjzuy N Eopfx Akrju - Saw carriage feed rate forward/backward: 1-150 m/min / 150 m/min - Feed rate of the program cut forward/backward: 90 m/min / 90 m/min - Main saw motor: 13.5 kW - Scoring saw motor: 2.2 kW - Working height: 920 mm - Main saw blade: 350 x 4.4 x 60 mm - Scoring saw blade: 180 x 4.4 - 5.4 x 45 mm - Cutting length: 4300 mm - Cutting width: 3700 mm - Label printer Pica 108 - Processing package for gypsum fiberboards - Annual maintenance and inspection by Homag - New PC in 2021 (Win10) and updated machine control software and CadLink Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, machine/vehicle number: 005108, Position 1: Front-Loading Panel Saws HOLZMA-HPP 380/43/43 + TLF Hnedpfx Akswuck Iorou Position 2: Horizontal Storage Systems HOLZMA-HPP 380/43/43 + TLF

Condition: excellent (used), HOLZMA HPP 530 PROFI LINE panel saw, in very good condition, with a cutting length of up to 3690. Hsdey Uk D Aspfx Akrjnu

Condition: used, Year of construction: 1991, Strip cutting system Strip cutting system consisting of: Alphamatic vacuum loading system with 4 roller conveyors Feed system to the crosscut saw Crosscut saw with vacuum workpiece clamping Further transport to the ripsaw Ripsaw Manufacturer: Holzma Type: HPP81-3200 Year of manufacture: 1991 Technical data - Modified in 2019 Extraction conveyor belt Hnedpszuy Nrjfx Akreu Longitudinal roller conveyor with longitudinal measuring system Automatic labeling system REA JET Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, machine/vehicle number: 008505, Position 1: Front-Loading Panel Saws HOLZMA-HPP 350/43/43 - HEE 38/22 Position 2: Lift Table HOLZMA-HPP 350/43/43 - HEE 38/22 Hnsdpfx Ajy Hcd Sjkrsu

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, cutting length (max.): 4,300 mm, workpiece length (max.): 4,300 mm, workpiece width (max.): 2,200 mm, plate height: 60 mm, Placing a bid obligates the buyer to collect the equipment by calendar week 02 in 2026. Forklifts and transport aids can be provided by the seller. Up for auction is a combination consisting of two Holzma saws, connected to a Bargstedt storage system. TECHNICAL DETAILS HOLZMA PROFILINE HPL 380 Cutting and Lift Table Data Cutting length: 4,300 mm Lift table cutting size: 4,300 mm x 2,200 mm Maximum panel size for lift table loading: 4,300 mm x 2,200 mm Minimum panel size for lift table loading: 1,200 mm x 400 mm Stack Heights Stack height for lift table, floor installation max.: 560 mm Stack height for lift table, pit installation max.: 780 mm Lift table maximum load capacity: 4 t Roller Rails Roller rail element, 10 tracks: 1 piece Roller rail element, 2 tracks: 6 pieces Clamping Jaws Hnodoxy Ng Rspfx Akrsu Pitch: 75/275/475/1,075/1,825/2,625/3,425 mm Extraction and Air Cushion Tables Push-off device position: 2,375 mm Air cushion table with rollers 2,160 x 800 mm: 1 piece Air cushion table with rollers 2,160 x 650 mm: 3 pieces Central blower: 1 piece Nozzle duct for air cushion tables: 70 x 70 mm HOLZMA PROFILINE HPP 380 Cutting Data Cutting length: 4,300 mm Cutting width (programmable pusher travel): 4,250 mm Saw blade projection: 95 mm Combi and Clamping System Combi profile rail element, 2 tracks: 9 pieces Clamping jaws: 7 pieces Pitch: 75/275/475/1,050/1,850/2,650/3,450 mm Manual trimming stops on clamping jaws: 4 pieces (positions 75/475/1,050/2,650 mm) Air Cushion Tables and Extraction Air cushion table with roller element 2,160 x 650 mm: 4 pieces Central blower: 1 piece Nozzle duct for air cushion tables: 70 x 70 mm Feed and Programmable Pusher Saw carriage feed forward: 1–130 m/min Saw carriage feed reverse: constant 130 m/min Programmable pusher speed forward: 80 m/min Programmable pusher speed reverse: 80 m/min BARGSTEDT PROFILINE TLF 420 Panel thickness: 3–60 mm Maximum panel size: 4,300 mm x 2,200 mm Maximum traverse length: 5,200 mm Measuring and Correction System Length measurement: integrated Width measurement: integrated Automatic rotation correction: available Note: Further technical details can be found in the attached order confirmations.

Condition: used, machine/vehicle number: 008567, Max. panel width: 3800 mm Hjdjzvwi Ejpfx Akrenu Max. panel length: 3800 mm Main saw blade projection: 75 mm No of Grippers: 6

Condition: excellent (used), Cutting dimensions 4300x4300 mm label printer 4 air tables table length 2.2 m 7 grippers pneumatically extendable stops for cutting veneered panels angle cutting unit main motor power 18 kW scoring saw motor power 2.2 kW cutting height 125 mm saw carriage feed speed 0-150 m/min pusher beam feed speed 0-90 m/min control system: CadMatic 4.0 year of manufacture 2011 operating hours: 5800 Hnsdpfxezuk Sks Akrou

Condition: used, machine/vehicle number: 008394, Max. panel width: 3800 mm Max. panel length: 3800 mm Main saw blade projection: 55 mm No of Grippers: 4 Hnjdpfxsygtbto Akrju

Condition: used, Year of construction: 2006, power: 25 kW (33.99 HP), cutting height (max.): 110 mm, cutting width (max.): 4,300 mm, cutting length (max.): 4,300 mm, TECHNICAL DETAILS Max. panel width: 4,300 mm Max. panel length: 4,300 mm Hnjdpszmtn Sefx Akreu Min. cutting height: 3 mm Max. cutting height: 110 mm Max. saw blade overhang: 125 mm Feed and Grippers Number of grippers: 9 Number of grippers on the sliding stop: 9 Max. feed rate: 80 m/min Max. feed rate of the saw carriage: 120 m/min Saw Carriage Max. tool diameter: 450 mm Motor power: 18 kW Speed: 2,870 rpm Scoring Unit Design: Postforming scoring unit Max. tool diameter: 340 mm Motor power: 2.2 kW Speed: 2,880 rpm MACHINE DETAILS Control system: Windows XP Machine programming software: CADMATIC 3 Total connected power: 25 kW EQUIPMENT CE marking 4 front support tables 9 grippers on the sliding stop Postforming scoring unit The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8206

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, operating hours: 3,625 h, cutting width (max.): 4,300 mm, overall weight: 7,200 kg, cutting length (max.): 1,600 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. cutting length: 1,600 mm Max. cutting width: 4,300 mm MACHINE DETAILS Hjdsz Ni S Dopfx Akronu Dimensions & Weight Dimensions (L x W x H): 13,600 x 2,450 x 2,450 mm Weight: 7,200 kg Transport packages: 8 pcs. Operating hours: 3,625 h

Condition: ready for operation (used), Year of construction: 2010, machine/vehicle number: 0-341-07-8150, functionality: fully functional, cutting width (max.): 3,800 mm, saw blade diameter: 380 mm, cutting length (max.): 4,300 mm, throat depth: 75 mm, Equipment: scorer, TECHNICAL DETAILS Blade extension: 75 mm Cutting length: 4,300 mm Cutting width: 3,800 mm Main saw blade, max. diameter: 380 mm Main saw blade, power: 9.2 kW Scoring saw blade, max. diameter: 180 mm Scoring saw blade, power: 2.2 kW Pusher carriage speed: up to 80 m/min Saw carriage speed: 1–120 m/min MACHINE DETAILS Numerical control: POWER CONTROL Software: Cad Matic 4.0 Electrical Data Voltage: 400 V Current: 31 A Frequency: 50 Hz Secondary current: 40 A Control voltage: 24 V DC EQUIPMENT Hnjdpfx Asxx Svrokrsu Front panel loading Front-side unloading Automatic side aligner Fixed front table made of Bakelite with air cushion system 3 mobile front tables made of Bakelite with air cushion system Pusher carriage with 6 clamps

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 0-240-10-3388, functionality: fully functional, operating hours: 565 h, cutting width (max.): 4,250 mm, controller model: POWER CONTROL CADmatic 4 PROFESSIONAL, section length (max.): 4,300 mm, working height: 920 mm, Lightly used machine! TECHNICAL DETAILS Cutting length: 4,300 mm Cutting width: 4,250 mm Saw blade projection: 95 mm Working height: 920 mm Speeds Saw carriage feed forward: 1–150 m/min Saw carriage feed backward: max. 150 m/min Program pusher speed forward: 90 m/min Program pusher speed backward: 90 m/min Angle cutting package Maximum panel thickness: 48 mm Leg length at 45°: min. 115 mm Angular accuracy at 1,000 mm: 0.1° Cutting angle: min. 0.0° Hedpfoyla I Rsx Akrenu MACHINE DETAILS Control system: POWER CONTROL CADmatic 4 PROFESSIONAL Main unit motor power: 13.5 kW Scoring unit motor power: 2.2 kW Mains voltage: 400 V Frequency: 50 Hz Required air pressure: 6 bar Compressed air consumption: 120 NL/min Extraction connection speed: approx. 26 m/s Negative pressure: 1,200 Pa Exhaust air volume: 3,800 m³/h Extraction connection—chip duct: 1 x 200 mm Extraction connection—pressure beam: 1 x 150 mm Operating hours: 565 h EQUIPMENT Power Concept Angle cutting package Groove-cutting package Automatic ejector rule Labelling package Data linkage to storage systems Note: Further details regarding machine configuration can be found in the attached document.

Condition: used, machine/vehicle number: 005106, Max. panel width: 4300 mm Hodpfeyg Edmex Akrjnu Max. panel length: 4250 mm Main saw blade projection: 95 mm

Condition: used, machine/vehicle number: 008514, Max. panel width: 4250 mm Max. panel length: 4300 mm Main saw blade projection: 95 mm No of Grippers: 7 Hnjdpfxoy Edn Ae Akrou Second flexible pusher: yes

Condition: used, machine/vehicle number: 008177, Max. panel width: 4300 mm Max. panel length: 4300 mm Main saw blade projection: 125 mm Hjdox A Tamepfx Akrsnu No of Grippers: 7

Condition: used, machine/vehicle number: 008503, Max. panel width: 4300 mm Max. panel length: 4300 mm Hjdpfxoy Hcd Eo Akronu Main saw blade projection: 80 mm No of Grippers: 8