Used Flat Cutting Machine for sale (68,777)

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, input voltage: 480 V, input frequency: 60 Hz, FLOW Mach 4 Waterjet Cutting Machine (6000 bar) Main specifications: Manufacturer: FLOW Model: FLOW Mach 4 Working area: 4 x 2 m Year of manufacture: 2014 Pump: WMC 87k High-Pressure Intensifier, 6000 bar (dual intensifier) Pump power: 100 HP Cutting head: 3-axis with taper compensation During cutting, the water jet naturally forms a slight cone, which can cause the edge of the part to be slightly angled. The taper compensation automatically tilts the head, ensuring that the edges remain straight and perpendicular. This results in higher accuracy and cutting quality, especially on thick materials, without the need for any secondary machining. Prjdpfs Agug Njx Airjc Key advantage: spare intensifier included The machine comes with an additional spare intensifier. This is a significant advantage, as the intensifier is one of the key components and the most heavily loaded part of the pump. Having a spare on hand allows for a quick return to work if the main intensifier requires servicing, minimizing downtime. Included with the machine and pump: - Water filtration station - Abrasive feeder - Several spare parts - Spare intensifier - Abrasive removal system Condition: The machine has been operating continuously, 24/7, so we cannot provide the exact number of operating hours. However, it has been maintained according to FLOW’s service schedules throughout this period. The machine is still in operation.

Year of construction: 1997, condition: used, functionality: limited functionality, machine/vehicle number: 9.037, The flat pouch packaging machine is suitable for packaging granular and powdered materials, spices, and cream powders into paper-based or composite film packaging. It requires a continuous supply of the material to be packaged and an intermittent supply of the packaging material. All packaging operations are performed in automatic mode. In 2006, the packaging machine underwent a complete overhaul and was equipped with an automatic twin-scale dispenser as an additional machine unit. As a result, the machine is suitable for dispensing not only powdered materials but also granular materials (e.g., coffee, pasta, soup granules, etc.). The equipment was removed from production; there were no problems with it, but it has not been in operation for a long time and may therefore require refurbishment. Stored in a covered, enclosed warehouse. Predpfxoz Ryhxo Airjc

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 06-13795, Technical characteristics: Work Area: - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse displacement of the column: ±20 mm - External diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece: - Maximum nominal module (in steel with tensile strength approx. 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm - Maximum external diameter (internal gearing): 280 mm - Maximum width of the toothed band: 42 mm - Maximum stroke length for tooth cutting: 50 mm - Maximum spindle travel: 70 mm Load Capacity: - Maximum table load (including fixtures): 150 kg - Maximum force exerted by the tailstock: 1,500 kg - Maximum achievable helix angle (hydrostatic guide): ~45° Cutter Spindle: - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Electrical Equipment: - Operating voltage: 400 - 480 V - Control voltage: 24 V - Magnetic voltage: 24 V - Cable cross-section: 16 mm² - Connected power: 15 kW - Protection: 50 A Dimensions: - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: - Vertical design: Optimal chip evacuation and easy loading/unloading - CNC control: Siemens Sinumerik 810D/840D - High precision: Positioning accuracy via Heidenhain linear scales Prsdpfexwlmujx Airjc - Measuring system: Marposs T25 (for angular alignment or rotation zero-point definition) - Oil filtration and cooling system - Magnetic chip extraction conveyor Machine status: Operational (WORKING)

Condition: good (used), Heidelberg Cylinder S 54×72 Automatic Die-Cutting Machine Prsdpfx Aj Ad Hihjiroc This machine is in production and ready to go. Format: 540x720mm The machine is ready for die-cutting. Fully automatic, central lubrication. Includes mounting frame, cylinder plate, carriages, and a set of fillers and locks.

Year of construction: 2014, condition: used, functionality: limited functionality, machine/vehicle number: 02/2014, The flat pouch packaging machine is suitable for packaging bulk products, granular and powdered materials, spices, and cream powders into paper-based or composite film packaging. It requires a continuous supply of the material to be filled and an intermittent supply of packaging material. All packaging operations are performed in automatic mode. The equipment has been taken out of production, had no issues, but has not been used for three years, so it may require refurbishment. Pjdpjz Ryfwjfx Airjrc Stored in a covered, enclosed warehouse.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser power: 12,000 W, sheet thickness (max.): 30 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Supports 12m steel pipe cutting Equipped with fully automatic combined loading and unloading system One-stop intelligent loading, cutting and unloading, increasing production efficiency by 200% Prodpfsw A H T Ajx Airsc Supports multiple processes such as beveling, locking, cutting, punching, opening welding holes, cutting bolt holes, marking and marking Laser power 12,000 W – 20,000 W X-axis travel 1,600 mm Y-axis travel 1,900 mm Z-axis travel 900 mm A-axis rotation ±90° C-axis rotation ±90° U-axis travel 30 mm V-axis travel 13,000 mm Positioning accuracy ±0.1 mm Max. workpiece section 1,000 × 400 mm Max. supported weight 5 T Supported profiles H-beam, channel steel, I-beam

Year of construction: 2011, operating hours: 8,350 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: WJ2010-1Z-SJ-S Smart Jet Strong, PTV Waterjet WJ2010-1Z-SJ-S Smart Jet Strong for sale For sale: PTV WJ2010-1Z-SJ-S Smart Jet Strong waterjet cutting machine. Professional CNC waterjet from PTV for the precise cutting of various materials. Thanks to waterjet cutting, materials can be processed without heat input, eliminating material deformation. This machine was used in our production process and is being offered for sale due to the termination of our business operations. Machine specifications: Brand: PTV Prsdpfx Aioz A Aa Hsrec Type: WJ2010-1Z-SJ-S Model: Smart Jet Strong CNC-controlled waterjet cutting machine Working area: cutting bed 2400x1000mm Year of construction: 2011 Operating hours: 8350 High-pressure pump: 4000 bar Includes: software / abrasive system / pump / water treatment / etc. The waterjet is suitable for cutting various materials and material thicknesses, making it a versatile machine for industrial production and custom work. The machine is currently still installed and can be inspected in working order by appointment. If you are seriously interested, please do not hesitate to contact us. Additional photos, videos, and technical data are available upon request.

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: A0441D0171, TRUMPF TruLaser Tube 7000 (T03) – 3.6 kW – LoadMaster Tube 6.5 m – Full Equipment Manufacturer: TRUMPF Model: TruLaser Tube 7000 (T03) Machine Type: CNC Tube Laser Cutting Machine Year of Construction: 2016 Control System: Siemens Sinumerik 840D Laser Power: 3,600 Watts (TruFlow 3600) Laser Technology: CO₂ Laser Voltage: 400 V Frequency: 50 Hz X-axis tube travel: 6,500 mm Outer diameter: 204 mm Lens cutting head with 155 mm focal length Prodpfxo Afpucj Airoc Condition: Used, very good Availability: Upon request For sale is a TRUMPF TruLaser Tube 7000 (T03), a high-performance CNC tube laser cutting machine with a 3.6 kW CO₂ laser and extensive optional equipment. The machine features an automatic LoadMaster Tube 6.5 m loading system with bundle support and two grippers, as well as a flexible unloading station with a length of 4.5 m. Thanks to the SeamLine Tube, PierceLine, FocusLine, NitroLine, and ControlLine equipment, the system offers versatile options for the precise processing of tubes and profiles. The integrated technology package for bevel cuts expands the processing capabilities. The scratch-resistant material feed, the movable conveyor tables, and the automatic scrap conveyor ensure an efficient material flow. All technical specifications are based on the available TRUMPF delivery documents from March 2016. Subject to change and errors. Sale due to business closure. Price upon request.

Condition: good (used), Knife grinding machine, flat grinding machine Göckrel 4700 mm Prsdpfe Af Np Aex Airsc

Year of construction: 2007, condition: good (used), useful lenght 5000mm Prsde Afn Rijpfx Airsc blades 500 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, Operating hours: 28,000 h Predpfx Aiey Rnb Dersc

Condition: good (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: L49/A0221E0510, TRUMPF TruLaser 3030 fiber + TruLaser 5030 – with 2 PalletMaster systems and a STOPA sheet metal storage system (49 slots) Complete, automated laser cutting system – preferably sold as a complete package. For sale is a comprehensive TRUMPF laser cutting system consisting of two laser cutting machines, each with a PalletMaster and connection to an automated STOPA sheet metal storage system. The system is particularly suitable for automated sheet metal processing and efficient material flow. 1) TRUMPF TruLaser 3030 fiber (L49) – 4 kW – Year of manufacture 2016 For sale is a TRUMPF TruLaser 3030 fiber (L49) with 4 kW laser power and extensive special equipment. The machine is in good condition. Technical data: Manufacturer: TRUMPF Model: TruLaser 3030 fiber (L49) Year of manufacture: 2016 Condition: Good Laser power: 4,000 watts (4 kW) Laser source: TRUMPF TruDisk 4001 Cutting area: 3,000 × 1,500 mm Control system: Siemens SINUMERIK 840D SL Drive system: Linear and torque direct drives Operation: 17-inch touch color display Equipment: BrightLine fiber Automatic pallet changer Automatic nozzle changer PierceLine FocusLine NitroLine PlasmaLine FlyLine FastLine ContourLine AdjustLine ControlLine (automatic height control) Automatic nozzle cleaning Integrated camera Drop&Cut Electric roll-up roof Conveyor system Extraction and filter system Cooling system Automation and Software Automation interface for external loading and unloading systems TruTops Fab Integration TRUMPF TruTops Laser Network connection and USB interface 2) TRUMPF TruLaser 5030 (L52) – 6 kW CO₂ laser cutting system Technical data: Manufacturer: TRUMPF Model: TruLaser 5030 (L52) Year of manufacture: 2015 Laser: TruFlow 6000 CO₂ laser Laser power: 6,000 watts (6 kW) Working area: 3,000 × 1,500 mm Drive: Linear direct drives (gantry) Cutting head: Universal cutting head with 250 mm lens Control system: 17-inch touch color screen Automatic pallet changer Equipment and functions: BrightLine CoolLine PierceLine / FocusLine / NitroLine PlasmaLine / LensLine / ControlLine Smart Nozzle Automation (automatic nozzle changer) Pjdpfx Aij Afpyfjrerc Smart Collision Prevention Automatic height control Cutting head lens with RFID chip Integrated cooling unit Longitudinal conveyor TruTops Laser software Other options available: Integrated camera systems Drop&Cut scrap material processing Automation interface PalletMaster connection TruTops Fab Integration 3. Automation – 2 × TRUMPF PalletMaster One PalletMaster per laser cutting machine 20 storage spaces each Modernization of PalletMaster and TKL by +profilsystems Connection to the STOPA storage system 4. STOPA sheet metal storage system Automated sheet metal storage system 49 storage spaces Connection to the laser cutting systems via the existing automation. Sale and Inspection The complete system, consisting of both TRUMPF laser cutting machines, the two PalletMaster systems and the STOPA storage system, is preferably sold as a whole. Individual sale is possible by agreement. Inspection by appointment. Price on request.

Year of construction: 2021, condition: as good as new (ex-display), functionality: fully functional, New Single-head cutting machine OMC GIOBI 600 (year 2021) with measuring roller conveyor FOM INDUSTRIE ASSOMAK VS 6m (year 2025) and inlet conveyor PORTER 4,2m (year 2025) Condition: new, demo machines - Saw blade D 600 mm - Hdro-pneumatic feed - Inclination is pneumatic on both sides, with fixed graduations of 22.5° - 45° - 90°. For intermediate gradations, with manual mechanical stop - 2 vertical and 2 horisontal clamps - Spray mist blade lubrication system - Integral pneumatic protection - ASSOMAK VS 6m: measuring roller conveyor with digital display and manual length stop positioning - Minimum cut 0 mm - Maximum cut 6000 mm - Measurement reading by encoder - Positioning precision ± 0,5 mm - Loading capacity per linear meter: 10 Kg - Width of bar resting surface: 200 mm - PORTER 4,2m: inlet roller conveyor - Loading capacity per linear meter: 10 Kg Pjdpfx Aioy Erwforjrc - Width of bar resting surface: 200 mm

Condition: new, CATALOGUE NUMBER RE060 - New machine Prjdjzrk N Ropfx Airec TECHNICAL DATA - Blade diameter ⌀250 – 350/30 mm - Scoring blade diameter (only works with ⌀300, 350 mm blades) ⌀120/20 mm - Main motor power 4 kW - Scoring motor power 0.75 kW - Rotational speed 4000 rpm - Scoring blade rotational speed 8800 rpm - Blade tilt 0 – 45° - Max. cutting length 1600 mm - Cutting width with parallel guide 1250 mm - Sawtooth blade ⌀350 mm - Arbor flange diameter 87.5 mm - Table fence adjustable to 90° – 45° angle, accuracy ±1° - Max. cutting height with ⌀300 mm blade, 95 mm - Max. cutting height with ⌀350 mm blade, 120 mm - Upper dust extraction port diameter ⌀80 mm - Lower dust extraction port diameter ⌀100 mm - Weight 480 kg - Dimensions of folded machine 2020x3380x1200mm Net price: 16000 PLN Net price: 3721 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (Prices may be subject to change in case of significant exchange rate fluctuations)

Condition: used, functionality: fully functional, Year of construction: 2014, machine/vehicle number: 125, control type: CNC control, laser type: CO₂ laser, laser source manufacturer: FANUC, laser source model: AF4000i-C, laser power: 4,000 W, overall weight: 9,500 kg, AMADA FO MII 3015 NT CO2 laser cutting machine, manufactured 03/2014, with 4 kW FANUC AF4000i-C laser source. The machine is operational and has been used for cutting by the seller. Operating and cutting hours are being checked and will be added. IMPORTANT: The tower storage / automatic material handling system was dismantled in summer 2026. The machine has no pallet changer. To move the cutting table outside the machine manually, suitable rails would need to be designed and built. This rail system is not currently installed. Prjdpfx Ajz Tdc Seiroc A computer with installed AMADA Dr.ABE nesting/programming software, version 2.15.04, and its software licence is included. Machine nameplate: serial number 125; weight 9,500 kg. The dismantled tower is stored outdoors. Any sale of the tower and its condition/completeness must be agreed separately. It is not part of the advertised machine configuration. Asking price: EUR 20,000 net, plus applicable VAT. Further information on hours, maintenance history, accessories included, inspection and collection arrangements will be added.

Condition: used, Year of construction: 2014, operating hours: 2,000 h, functionality: fully functional, sheet thickness (max.): 38 mm, sheet thickness steel (max.): 38 mm, sheet thickness aluminum (max.): 25 mm, table length: 3,000 mm, working width: 1,500 mm, table width: 1,500 mm, working length: 3,000 mm, controller manufacturer: Hypertherm, controller model: EDGE Pro, control type: CNC control, sheet thickness stainless steel (max.): 25 mm, Equipment: cooling unit, documentation/manual, We offer this used Ermaksan ER 4000 Plasma Cutting Machine, year of construction 2014. Hypertherm HyPerformance® HPR260XD plasma source and Hypertherm EDGE® Pro CNC control. The table size is 3000x1500mm, and it uses TurboNest® CAD/CAM software. It can cut black steel up to 38mm, stainless steel, and aluminum up to 25mm. Pjdpfx Asz Sqpijirerc If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), functionality: fully functional, machine/vehicle number: 5630717, cutting width (max.): 800 mm, insertion depth: 800 mm, overall weight: 1,350 kg, type of input current: three-phase, input current: 6 A, input voltage: 380 V, cutting height (max.): 110 mm, input frequency: 50 Hz, Equipment: documentation/manual, Adast Maxima MS80 cutting machine, good working condition, cutting length 800mm cutting depth 800mm all documentation included spare knife included Pedjxfu Svepfx Airerc

Condition: used, Year of construction: 2024, functionality: fully functional, This is a cutting machine manufactured by Scharfen, model ES 300, year of manufacture 2024. The machine has been inspected in our in-house workshop and is fully functional. This machine was an incorrect purchase; it turned out that a miter cutting machine was required. Therefore, it was only used for a short period. You will receive an invoice with VAT shown. The list price of the machine is €4,082 net / €4,857.58 gross. Our offer price is €2,932.77 net / €3,490 gross. Our used equipment service for you: 6 months warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality brand-name equipment at fair prices. Professional overhaul / inspection & expert cleaning. Inspected & fully functional - or your money back. Flexible shipping or self-collection options. Competent advice - before and after purchase. Provision of operating instructions, connection diagrams & spare parts. Inspection according to DGUV V3. Technical data: W x D x H: approx. 580 x 635 x 420 mm Blade: 300 mm diameter, hollow ground, hard chrome-plated stainless steel, long cutting life. Cutting thickness setting: 0-25 mm (infinitely adjustable) Cutting length: 250 mm Cutting height: 210 mm Noise level: less than 70 dB (A) Grinding device removable Voltage: 400 V three-phase or 230 V single-phase Power: 0.6 kW Weight: approx. 51 kg Serial number: 2241096 Year of manufacture: 2024 Condition: used, inspected, fully functional Additional information: Large storage area for sheets Quick and easy to clean Extremely robust and low maintenance 100% stainless steel Shipping: Delivery or self-collection by arrangement. Worldwide shipping on request. Shipping to islands or mountain stations only by arrangement. Do you have any questions, would you like advice, or would you like to see something on-site? You can reach us by phone during our opening hours: Monday to Friday, 9:00 a.m. to 1:00 p.m. and 2:00 p.m. to 5:00 p.m. The sale is exclusively subject to our general terms and conditions (GTC). Prsdpsz Ilm Tsfx Airsc

Condition: good (used), Perfecta 76 UC Paper Cutting Guillotine This machine is in very good condition. It has been in one hand since new. Technical specifications: Cutting width: 760mm Stack height: 110mm Weight: 1650kg Power supply: 400V Equipment: – LCD programmer – photocells – air table – cutting line – hydraulic clamp with variable force adjustment – manual – tool kit – clamp plate – spare blade Psdpfxs Ad Hkfo Airerc

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 55,771 h, laser hours: 35,157 h, laser power: 3,200 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 8 mm, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 150 mm, positioning speed: 140 m/min, positioning accuracy: 0.02 mm, year of last overhaul: 2025, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 150 mm, Equipment: centralized greasing system, cooling unit, documentation/manual, emergency stop, safety light barrier, The laser was fully functional and in very good technical condition until its professional dismantling. The machine was regularly serviced by an authorized service provider, and a complete service history is available. In 2025, all mirrors were completely replaced. The dismantling and professional disconnection of the machine were carried out by an authorized service provider. The machine is currently safely stored in a dry warehouse and is ready for shipment. Videos of the machine in operation are available. Predpfx Asv Hxbbeirec

Condition: excellent (used), Year of construction: 2008, The ATOM FlashCut 3010 plotter is an advanced digital knife cutting machine designed for precise and fast cutting of a wide range of materials, such as leather, textiles, foams, and plastics. It is particularly valued in the footwear, leather goods, and gasket/component manufacturing industries. ⸻ 📐 Technical specifications • Working area: 3000 × 1000 mm • Power consumption: 13.5 kW • External dimensions: 3765 × 1955 × 2805 mm (height) • Weight: 1320 kg ⸻ ⚙️ Main features • Versatility: The plotter enables cutting of various materials, from soft leathers to hard plastics. • Ergonomics: Compact and ergonomic design ensures easy operation and space-saving installation in production facilities. • Vacuum system: Dual-zone vacuum system ensures stable material hold-down during cutting. • Cutting head: Supports multiple tools, including oscillating knives and creasing tools, providing greater production flexibility. ⸻ 🏭 Industrial applications The ATOM FlashCut EASY 3010 plotter is used for: • Footwear and leather goods manufacturing • Gasket and technical component production • Textile and furniture industries • Packaging and advertising material production ⸻ 🛠️ Additional information Psdpfxoy D E R Ns Airsrc The 3010 model is especially recommended for companies seeking a solution that combines high cutting precision with production efficiency. Thanks to its ability to process large-format materials and support for various cutting tools, this plotter is suitable for both serial production and custom projects.

Condition: good (used), Paper cutting guillotine Perfecta 76 TVC Device in perfect condition, very low mileage. After general renovation in 2013. Technical data: Cutting width: 760 mm Stack height: 110 mm Weight: 1650 kg Power supply: 400 V Equipment: – programmer with touch screen – photocells – air table – cutting line – chrome table surface – enlarged side tables – hydraulic clamp with smooth force regulation – instructions – full set of tools – plate for clamp – tapping block – spare knife Pjdpfx Aiez Rki Hsrsrc

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, operating hours: 28,025 h, machine/vehicle number: A0320A0086, laser type: CO₂ laser, laser source manufacturer: TRUMPF, laser hours: 6,496 h, laser power: 6,000 W, laser wavelength: 10,600 nm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 15,000 kg, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, TRUMPF TruLaser 7040 CO₂ laser cutting machine, year 2011. Equipped with 2 laser resonators, each with 6,000 W power, and 2 cutting heads. Technical data: Laser power: 2 x 6,000 W 2 CO₂ laser resonators 2 cutting heads Laser operating time: 28,025 h Predpfx Ais Adzppsrjc Beam operating time: 6,496 h Power supply: 400 V / 50 Hz Connected load: 130 kVA Machine weight: approx. 15,000 kg Machine No.: A0320A0086 The machine can be inspected while powered on in Poland. Additional information and photos are available upon request. Price: EUR 39,000 net, EXW Poland. Loading and transport to be agreed separately.

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser power: 3,000 W, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Working Area (mm): 3048×1524 X-Axis Travel (mm）: 1524 Y-Axis Travel(mm）: 3048 Z-Axis Travel（mm）: 80 Prjdpfx Aijxvwcxerjc X/Y Axis Positioning Accuracy: ≤0.03mm/m X/Y Axis Repositioning Accuracy: ≤±0.02mm Maximum Synthetic Positioning Speed: 150m/min Maximum Acceleration: 1.2G Cutting Slit Width: 0.1mm-0.5mm (measured for platesless than3mm thick) Cutting Surface Roughness: Ra3.2um-Ra25.4um(measured for plate thickness below3mm） Floor Size(mm): 6000*3000 Mainframe Dimension(mm): 5000*2300*1800 Screen Size: 21"LCD TransmissionMode: Rack andpinion dual drive Table Loading Capacity: 1.1(ton)

Condition: good (used), Year of construction: 2011, machine/vehicle number: 11095150, IPG Laser GmbH used 4kW laser source with cooling unit 400-460V AC 3P/PE 50/60 Hz 30.8A year of construction 2011 DWG number: G25-16-100920-2 Cooling unit: LC170.01-W3.5 Year of construction 2010 3/PE - 400V 50Hz 21,8A 4pcs available Podpfxsrq D D Ej Airjrc