Used Flat Shear for sale (7,559)

Condition: good (used), LOG-O-MATIC (Mainaschaff/FRG) Surface Grinding Machine FS 5030 AH Year: 4/1991 Grinding area: approx. 500 x 300 mm Automatic vertical feed Manual longitudinal/cross/vertical feed Accessories/Equipment: Electromagnetic chuck approx. 500 x 300 mm Manual wheel dresser on support arm Paper band filter Coolant system Machine lamp Machine supports Accessories: Ndodpfx Aajxz R Nionjf Side, angular and radius dressing device Balancing scale Demagnetizing plate The machine is in very good condition and comes from a training facility Available from March 2026

Condition: new, Year of construction: 2025, NEW 20FT FLATRACK Nedpfjxvrmfex Aansdf Steel floor Tare weight: 1,800 kg Payload: 28,680 kg Max. gross weight: 30,480 kg = Further Information = General Information Year of manufacture: Aug. 2025 Model year: 2025 Dimensions Dimensions (L x W x H): 606 x 244 x 33 cm Weights Tare weight: 1,800 kg Payload: 28,680 kg Gross weight: 30,480 kg Condition Overall condition: very good Technical condition: very good Visual appearance: very good More information Contact Arne Honingh for further details.

Condition: good (used), Year of construction: 2003, machine/vehicle number: A 10371, Offer 25448 Technical Data: - Max. working width: 3050 mm - Max. cutting capacity (St 40): 0.5 – 6 mm - Cutting angle adjustable (motorized): 0.5 – 3° - Blade gap adjustment: manual - Number of hydraulic hold-downs: 18 pcs - Motorized backgauge with SP8 positioning control: 10 – 750 mm - Strokes per minute (depending on cutting angle and length): 9 – 17 strokes/min - Hydraulic drive: 400 V / 7.5 kW Nodex I I Uxopfx Aansdf - Table height: 770 mm - Space requirement incl. backgauge, w/o front support arms: approx. W 3750 x H 1600 x D 2450 mm - Weight: approx. 4500 kg Includes: - Electric foot switch - Cutting line illumination - Angle gauge - 2 support arms - Rear area protection with side guard and light curtain

Condition: excellent (used), functionality: fully functional, Year of construction: 1997, max. sheet thickness steel (450N/mm²): 6.5 mm max. cutting width: 3080 mm Nsdsx Nalrepfx Aanodf machine weight: 5600 kg Very good, ready-to-use condition.

Condition: ready for operation (used), Year of construction: 2005, sheet width 3050 mm plate thickness 13.0 mm thickness at "Niro-steel" 8.0 mm work height max. 930 mm no. of strokes 9 - 17 Hub/min cutting angle 0.5 - 3.0 ° down holder 18 Stück Control SC 100 T engine output 22.0 kW weight of the machine ca. 9500 kg range L-W-H 4270 x 2200 x 2250 mm Ndjdox Avq Ispfx Aanjf Good/well-maintained condition (!!) Current new price approx. 80.000 euros Features: - Electro-hydraulic/sliding table shear - HACO CNC control model “SC 100 T” * Preset positioning of the backgauge * Digital display of actual position * Electro-hydraulic cutting angle adjustment * Electro-hydraulic cutting gap adjustment * LCD display * Emergency stop switch - NC electro-motorized backgauge, on ball screws - Hydraulically operated hold-down device - Front finger guard - Ball rollers in the support table * Support table with recessed handles - 1x side stop, with mm scale - 1x front support arms - 1x freely movable foot switch - Rear safety device - Operating instructions in German (PDF)

Condition: new, sheet length: 1360sheet thickness: 3Standard Accessories: Nodpexx D Efofx Aanodf NC control system Programmable motorized backgauge with 750 mm travel Shadow line illumination 1 pcs squaring arm with scale 2 pcs sheet support arms 1 pcs sheet support arm (for models 1106, 1306, 1505) Finger protection Ball transfer table Easy front access blade gap adjustment Ballscrew mechanism Cut counter Portable foot control with emergency stop button Photocell safety sensor on rear guards

Condition: new, The KHS E 1000 Manual Guillotine Shear is an essential tool in any locksmith's shop, designed for the precise and robust cutting of large steel plates. This classic manual plate shear features a sturdy cast-iron construction, ensuring durability that can withstand the demands of multiple generations of use. With a working length of 1,040 mm and the ability to handle plate thicknesses up to 1.5 mm while maintaining safety, it combines efficiency with operator comfort thanks to its counterweights and adjustable table stop. The KHS E 1000 also includes a conveniently adjustable back-gauge, making it easier to produce consistent cuts. Request a quote today to enhance your sheet metal processing capabilities with this reliable manual guillotine shear, a perfect fit for any guillotine shears category. Nodpfx Ajn D Ehvoanodf

Condition: good (used), Year of construction: 1978, functionality: fully functional, grinding length: 700 mm, grinding width: 450 mm, grinding height: 350 mm, grinding wheel diameter: 300 mm, 1 used ELB precision surface grinding machine, function-tested Model: Gerh-55C/FS750 C Njdpow I D T Asfx Aansdf Grinding range: 700 x 450 x 350 mm Grinding wheel: 300 x 50 x 76 mm Year of manufacture: 1978 / Overhauled in 2003 by Geibel & Hotz Retrofitted with PLC control system INCLUDED ACCESSORIES: - 1 electro-magnetic clamping plate 700 x 450 mm - 1 wet grinding unit / water tank with pump - 1 grinding wheel arbor with wheel - 1 digital display for vertical (Y) + cross (Z) axes - 1 hand-operated straight dressing device

Year of construction: 1995, condition: refurbished (used), Technical data : Grinding area 1000 x 550 mm Max. longitudinal / transversal travel 1000 / 550 mm grinding height 400 mm Table load 900 kg Magnet size approx. 1000 x 550 mm Max. wheel size 400 x 100 x 127 spindle motor 10 KW speed controlled 5 - 35m/s table longitudinal feed approx. 2- 28 m/min adjustable, hydraulic cross adjustment DS - motor vertical adjustment servo - motor Dimensions, W x D x H approx. 4,8 x 2,7 x 2,7 m Installed power approx. 19,5 kW Equipment / scope of delivery : - Machine stand made of MICRO-Granite - magnetic clamping plate 1000 x 550 mm Nedpem H U Tbefx Aanjdf - Demagnetization - Head dresser with compensation - Automatic infeed with presize and finished size - Coolant tank, capacity approx. 260 liters - paper filter - set-up elements - Machine is rebuilt - Operating manual - SPS control new - Color scheme RAL 7035 / 7046

Condition: excellent (used), Year of construction: 2008, X/Y/Z travel: 900 x 400 x 200 mm Table size: 800 x 400 mm Ndjdpfx Aasv Irwronsf

Year of construction: 1992, condition: used, machine/vehicle number: 107.92, NC control: make SIDAX COMPAX Number of axes 2 with automatic grinding wheel dressing compensation . grinding length 1000 mm Grinding width 550 mm Maximum distance between table and spindle center 600 mm Longitudinal movement 1100 mm Transverse movement 500 mm Cross feed: Stepless 0-20 mm/stroke Table speed: Stepless 0-35 m/min Vertical feed 0.01-0.05 mm Grinding wheel size: Diameter/Width/Bore 400x60x127 mm Nsdpfsg E Sphsx Aanedf Grinding wheel speed 1450 rpm. . Motor 380 Volt power 7.5 PS Machine dimensions: length x depth x height 4000x2000x2300 mm Weight of the machine approx. 5900 Kg . Accessories: Magnetic plate 1000x500 mm Grinding wheel flanges n° 1

Condition: ready for operation (used), control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, sheet thickness (max.): 10 mm, total length: 4,600 mm, total width: 2,520 mm, total height: 1,850 mm, Equipment: angle stop, foot remote control, Sheet metal shear Amada GH1040 Z Ndodpfx Ajx Igndjanjf New blade set Fully functional Hydraulic cylinders were overhauled approximately 6 months ago.

Condition: excellent (used), functionality: fully functional, Segment I – Unwinder with stabilizing table The first segment is responsible for stable guidance of the material web. It is equipped with pins enabling both lamination and delamination of the face with liner or other raw material. It has a laminator with the possibility of precise pressure adjustment. In addition: • The hanging mechanism in each segment allows for continuous operation, eliminating the need to stop the machine while the flat die is working. • Leading (pulling) servomotors ensure precise control of the material, also located in the station. Njdewck U Rjpfx Aanjdf Segment II – Central (Die) The heart of the machine is the flat die, allowing for cutting and embossing. It has been equipped with: • Hot stamping system – thanks to the heated plate with a mounted matrix, it allows for the application of effective decorations. • Upper foil unwinders enabling additional material processing. • Manual pressure adjustment – four independent clocks provide full control over the process, which is particularly important for irregular matrices and unconventional work. • Lower trolley as an alternative to the hanging system – used depending on the specifics of the work. Segment III – Puncher The third segment is responsible for separating cut labels and transporting them to the receiving tray. • Puncher – precise separation of single labels. • Two laminators – one on each side of the puncher, with adjustable pressure. • Unwinders and winders ensuring smooth guidance of additional raw material. Segment IV – Rewinder The last segment is responsible for the final winding of the finished material. Equipped with: • Two mandrels – enabling simultaneous or alternate winding of the finished product. • Web tensioning system (nip holding and web tensioning) – ensuring stable guidance of the material. • Slitting disc knife station. • Whisk (waste) extraction system. • Web sensors placed under each overhang, ensuring optimal process control. Additional functionalities • Remote control – the machine can be operated via the tablet included in the set. • Mark sensor system (register) – precisely matches previously printed raw material, ensuring high accuracy and repeatability of production.

Condition: ready for operation (used), For sale: an indestructible Makita carpentry milling machine, Model 2516, with as-new cutters for dovetailing and rebating. Technical data: - 1430 watts - 110/230 V transformer voltage - 12,000 rpm Ndodpfx Aasd Tdx Densf The milling depth is 60 mm. Beams up to a width of 320 mm can be clamped. Naturally, a depth stop is included, which can be quickly and tool-free adjusted. The hand crank allows for fine adjustment of the position to be mortised. Because the milling machine clamps onto the beam, unlike certain machines from other well-known manufacturers, there is no risk of plunging in crooked or at an angle. With a hand lever, the mortiser can move along the beam, allowing for very precise positioning of the mortise. As seen in the pictures, the machine is in excellent condition, both technically and visually. The construction is robust and well-engineered. International shipping is possible.

Condition: new, sheet length: 4.000sheet thickness: 20,0cutting area width: 4000total power requirements: 22weight approx.: 20000messurements (LxWxH): 4850 x 2300 x 2180 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Nsdpfxexxd D Uj Aansdf Sequence repeat function • Auto-cutting (Flying cut)

Condition: excellent (used), Year of construction: 1973, Grinding length 500 mm Grinding width 230 mm Table size 760 x 200 mm Automatic feed Magnetic chuck Ndedewn Tdxopfx Aanjf Filtration system

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, control type: CNC control, degree of automation: automatic, sheet thickness (max.): 10 mm, Baykal MGH 3100x10 from 2008. Plateshear in neat condition. Available directly. Nsdpex Nbcfsfx Aanedf

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 4,100 mm, warranty duration: 12 months, controller model: CutLink, back gauge: 750 mm, control type: NC control, stroke rate (max.): 35 1/min, Equipment: CE marking, angle stop, documentation/manual, emergency stop, finger protection, foot remote control, Demonstration machine motorized guillotine shear Producer CIDAN Year of manufacture 2023 Cutting length 4100 mm Sheet thicknesses 1.50 mm at 400 N/mm² Sheet thicknesses 0.60 mm at 700 N/mm² Sheet thickness 2.2 mm at 200 N/mm² Up to 35 strokes per minute Equipment: Touch control CutLink Backgauge range 5-750 mm Pneumatic sheet holding device forward depositing Sheet chute forward depositing (return to sender) Extendable table support range 800 mm LED cutting line lighting Nodpfewxu S Eex Aanodf Machine is available in our showroom in A- 6800 Feldkirch Delivery time: immediately

Condition: new, Year of construction: 2025, – Capacity 1360 x 3 mm Ndodsx Izkaspfx Aanjf – NC back gauge – Small cut sheet metal pieces are automatically ejected at the front of the machine – Safety light barriers at the rear – Front sheet metal supports – Cutting line illumination – Foot operation – Emergency stop – 400V

Condition: good (used), Year of construction: 1985, Maximum disc diameter: 230 mm Magnetic table size: 1000 x 300 mm Nodjlz Nh Iepfx Aanodf

Year of construction: 2001, condition: ready for operation (used), A Schechtl swing bending machine for sheet metal processing is available. Working length: 2040mm, opening height: 140mm, bending capacity: 3mm, bending speed: 50°/s, back gauge: 750mm. Machine dimensions X/Y/Z: approx. 3000mm/750mm/1250mm, weight: approx. 2750kg. On-site inspection is possible. Ndsdpsx Hz Ntefx Aanjf

Condition: like new (used), functionality: fully functional, Year of construction: 2023, operating hours: 20 h, machine/vehicle number: 2306267, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: ELGO, controller model: P40T, working width: 3,100 mm, cutting angle (min.): 1.5 °, stroke rate (min.): 18 1/min, stroke rate (max.): 23 1/min, sheet thickness (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, table height: 865 mm, back gauge adjustment: CNC-controlled, back gauge: 1,044 mm, power: 11 kW (14.96 HP), input voltage: 400 V, input current: 25 A, input frequency: 50 Hz, operating pressure: 220 bar, overall weight: 6,400 kg, total length: 4,630 mm, total width: 2,965 mm, total height: 1,990 mm, number of support arms: 14, pump pressure: 220 bar, Equipment: documentation/manual, emergency stop, foot remote control, For Sale: LeMans Hydraulic Guillotine Shear B 06-3100 (2023) Like-new condition with only ~20 operating hours. Equipped with an automatic backgauge controlled via a modern ELGO P40T touchscreen, allowing quick and precise cutting length adjustments. Features include 3100 mm cutting length, 6 mm max thickness, 11 kW motor, 220 bar hydraulic system, and 400V / 3-phase power. Nodpfx Aasx An D Tsnedf Extremely solid 6400 kg construction ensures high precision and stability. Ideal for workshops seeking a powerful, nearly unused hydraulic shear with modern controls.

Condition: used, Year of construction: 2011, Maximum grinding length: 1200 mm Maximum grinding length with table dresser: 1000 mm Maximum grinding width: 600 mm Grinding height (table to underside of grinding wheel): 550 mm Table load with magnetic chuck: 975 kg Table load without magnetic chuck: 1200 kg Table speed: 1 - 40 m/min Grinding spindle Motor spindle: 11 kW Grinding wheel: 406 x 152.4 x 100 mm Speed: 1400 rpm Longitudinal axis (Z-axis) Rapid traverse: 5 m/min Adjustable feed: 1 - 50 mm Continuously variable feed: 0 - 2000 mm/min Smallest infeed: 0.001 mm Vertical axis (Y-axis) Rapid traverse: 1.5 m/min Smallest infeed: 0.001 mm Space requirements approx.: 4450 x 2935 x 2540 mm Total weight approx.: 6700 kg Equipment: Nsdpfxexhdz Eo Aanedf - Electro-permanent magnetic chuck 1000 x 500 mm incl. electronic control module and potentiometer - Coolant cleaning system with paper filter and magnetic separator 350 l – delivery rate 100 l/min - Static frequency converter incl. automatic dressing compensation - Complete extraction system - Siemens control with electronic handwheel - Various accessories, 2 flanges and 5 grinding wheels

Condition: used, Year of construction: 2017, total length: 1,500 mm, total width: 900 mm, total height: 1,700 mm, Empty weight: 1.400 kg Price: On request Steel round: 40mm Steel flat: 200x20mm / 300x15mm Ndsdowraazepfx Aanef Notching + Punching + cutting - Year: 2017 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 155976 - Motor power: 4.0kW - Model: Hydraulic - Power: 60.0ton - Transport dimensions: 1500mm x 900mm x 1700mm (l x w x h) - Transport weight [kg]: 1400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2001, condition: ready for operation (used), Working length: 2040mm, max. cutting capacity: 3mm, stroke rate: 30strokes/min, table height: approx. 850mm, back gauge: 750mm. Machine dimensions X/Y/Z: approx. 2400mm/2000mm/1450mm, weight: approx. 1500kg. An on site inspection is possible. Ndodpfx Aajx Hz Nyonof