Plate shear

Schröder MHSU

Condition: used, sheet width 4080 mm plate thickness 2.0 mm ST thickness at "Niro-steel" 0.8 mm Sheet thickness for ALU 2.5 mm no. of strokes 34 Hub/min cutting angle 1.3 Grad distance between columns 4310 mm back stop - adjustable 15.0 - 750 mm table height 820 mm Control ELGO engine output 9.0 kW weight of the machine ca. 3600 kg. Fgedjxabc Rjpfx Ap Djh range L-W-H 5250 x 2200 x 1400 mm Good condition (!!) Current new price approx. €70,000 Special price upon request The MHSU motor-driven guillotine shear is based on a torsion-free, rigid welded construction and a dynamic, quiet, and powerful gear motor. High static and dynamic rigidity is ensured by robustly dimensioned main components such as the cutter bar, support table, side supports,and the main drive unit. The motor- driven guillotine shear was developed forsheet metal and plastics processing. With these shears, you can effortlessly produce clean cuts in series. Features: - NC robust, motorized swing cut guillotine shears - with ELGO NC control unit * Digital position display of the backgauge * Adjustable from the front right * With target/actual value input * Continuous adjustment across the entire travel range * Limit switch protection - NC motorized material/backgauge - Shatter-proof, torsion-free welded steel construction - Compact and clearly arranged machine design - Support table with recessed grips - 1x hold-down bar - 1x side stop with T-slot and scale - 3x front support arms - 1x freely movable foot switch - Operating instructions Optional accessories included: - Pneumatic sheet metal holding device for thin sheet metal blanks

Year of construction: 2022, condition: new, Motorized plate shear MS 1303 Technical data: Sheet metal width: 1350 mm Sheet metal thickness: 3.0 mm Distance between uprights: – Table width: 400 mm Fodpfxehk Nfue Ap Dogh Working height: 850 mm Control: conventional

Condition: used, Year of construction: 2008, sheet width 1530 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.0 mm no. of strokes max. 34 Hub/min Fgodpfxsxyln Ro Ap Deh cutting angle 2.70 Grad distance between columns 1540 mm work height max. 920 mm Control konv. voltage 400 V engine output 3.2 kW weight of the machine ca. 1115 kg. range L-W-H 2275 x 2220 x 1400 mm Features: - Robust motorized swing-arm guillotine shear - Break-resistant, torsion-resistant welded steel construction - Compact and easy-to-use machine design - Manual backgauge, adjustable from the rear * Stepless adjustment across the entire travel range - 1x hold-down bar - 1x freely movable foot switch - Front, extendable table extension - Rear safety device - Original operating instructions * Optional accessories included: - Sheet metal holding device for thin sheet metal blanks

Condition: good (used), Year of construction: 2016, machine/vehicle number: 12300379, Offer 26209 Technical data: - max. working width 1020 mm - max. material thickness 2.5 mm - cutting angle 2.4 ° - stroke rate up to 34 1/min - manual rear stop with digital position display 500 mm - table height 850 mm - front angle stop - front extendable material support - pneumatically assisted sheet metal lifting with sheet metal discharge to the front - electric foot pedal Fsdpfx Aozrk Rusp Dogh - tapping – single stroke can be preselected - rear safety guard - mounted on a steel plate - pneumatic connection 6 bar - drive 400 V / 3 kW - space requirement approx. W 2100 x H 1150 x D 2200 mm - weight approx. 1400 kg

Condition: new, functionality: fully functional, Year of construction: 2026, Technical specifications: Working length: 4040 mm Overall length: 4858 mm Depth: 2592 mm Working height: 920 mm Total height: 1430 mm Weight: 3450 kg Maximum cutting thickness: Steel: 2.5 mm Aluminum: 4.00 mm Stainless steel: 1.5 mm Standard equipment: ▪ Mechanical backgauge, range 0 - 750 mm, with pneumatic sheet support system; front or rear material discharge ▪ Required compressed air connection: minimum 6 bar ▪ 4 front support arms, 1000 mm, with T-slot and metric scale ▪ 2 front sheet supports, square bar type, positioned on the left and right sides of the machine, with T-slot and metric scale ▪ Blade clearance adjustment with scale ▪ Controller with digital readout (memory for 99 six-step programs) ▪ Rigid welded steel frame. Maintenance-free linear guides and bearings. ▪ Foot switch ▪ CE certificate NEW! Option to install a conical backgauge Fgjdpfox Hykvsx Ap Dsh Advantages: Fast return stroke, high cutting capacity Rigid welded steel frame Maintenance-free linear guides and bearings.

Condition: good (used), Year of construction: 2001, machine/vehicle number: 122019, Offer 25507 Technical data: - Max. working width: 2520 mm - Max. material thickness: 2.0 mm - Cutting angle: 2.2° - Stroke rate up to: 25 strokes/min Fodpfsx S Ed Esx Ap Degh - Backgauge with ELGO position control up to 750 mm - Table height: 850 mm - Front angle gauge: 2000 mm - 2 front support arms: 1000 mm - Pneumatically assisted sheet support - Electric foot pedal - Single or repeat stroke selectable - Rear safety guard - Drive: 400 V / 3 kW - Space requirements: approx. W 3450 x H 1150 x D 2200 mm - Weight: approx. 1600 kg

Year of construction: 2007, condition: excellent (used), Description to follow! Fsdpoyrtv Usfx Ap Degh

Condition: new, Tubend hydraulic profile ring bending machine HPK 50 3 driven rollers Digital display Incl. standard roller set steel Hydraulic / motorized ring bending machine Can be used horizontally and vertically with 3 driven rollers 3 motor-driven rollers Hydraulic infeed of the top roller Hydraulic: 8 tons Rollers are hardened Left/right rotation via foot pedal Fgedpfx Aeum R U Asp Djh Mounting: shaft 50 mm Roller Ø 162 mm Speed: 4.5 m/min Motor power: 1.1 kW Electrical connection 400 V According to CE standard Weight 510 kg L.W.H. 810 x 950 x 1500mm Power table see PDF file

Condition: good (used), You are bidding here on a brand-name guillotine shear from the well-known German manufacturer Schröder. Device features: - Cuts up to 2.5 mm steel according to the nameplate - Working length: slightly over 2.5 m - Back gauge: 750 mm - Side/winkel stop - Sheet metal chute - See pictures: machine has not been refurbished - Foot pedal - Weight: see image - In proper condition You will receive an invoice with VAT shown separately. Forwarding/shipping can be arranged upon request. Free loading as shown in the pictures. Inspection and test run possible by appointment via phone. Payment in cash upon collection. If you have any other requests, please call me briefly – thank you. Fgedpfxsw U Srys Ap Deh Collection should take place within 8 days after end of auction. Location: 97261 Güntersleben Item number: 250801

Condition: good (used), You are bidding here on a branded guillotine shear from the well-known German manufacturer Schröder, in good condition. Device features: - Schröder MHSU shear - Cutting capacity: see nameplate, up to 3mm steel; significantly more for aluminum Fgsdpfx Apjy R Efae Djh - Working length: just over 2 meters - Manual backgauge approx. 750 mm / a 1000 mm backgauge is equipped with digital display - Side/angle stop - Extension arm up to 2 meters - Reversible blades - Cutting gap lighting - Sheet metal chute - Foot pedal - Weight approx. 1.3 t We also have other machines available, such as the Schechtl MAX 200 – 2.5mm, or Schechtl MA 200 – 2mm and HA series, Schröder AKV 2mm, KSV 1.5mm, and KS 1mm, as well as folding machines and shears by RAS, etc. The current net new price is approximately 25,000 EUR. You will receive an invoice with VAT shown separately; VAT is included in the invoice amount. Shipping can be arranged if requested. Forklift available on site. Free loading as shown in the pictures. Viewing and test run possible by phone appointment. Payment in cash upon collection. If there is anything else I can assist you with, please give me a short call – thank you. Collection should take place within 8 days after the end of the auction. Location: 97249 Eisingen (3 minutes from the motorway) Item number Schröder MHSU 2m 3mm 260511

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 5511141, cutting width (max.): 550 mm, Cutting machine EBA 551-06 LT, working width 55 cm, with light barriers, air table, program control, rear table cover, year of manufacture 2011, machine number 5511141, in good condition, immediately available. Fgedpfjzkcglsx Ap Deh If you are interested, we will be happy to provide you with information about other machines in our inventory. You are cordially invited to inspect the machine at our facility, subject to prior appointment.