Used Flour Silo System for sale (41,105)

Condition: used, Bosch Type: XR31-3 Description: Delta pick and place robot Manufacturer: Bosch Product type: Sigpack Systems XR31-3 Nljdpfx Aiezdrzroreh Designation: Delta pick and place Year of manufacture: 2008 Pads/cycle (min): 185 Max. acceleration (g): 0.455 Cycle time (s): 0.32 Working area (mm): 48 x 9.2 Maintenance rate: None Assembly time (h): 2.5 Scope of supply: 1 x Delta robot XR 31-3 Manz operating panel pendant P51 1 x Rotary gripper Condition: used (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Laserline Type: LPC03 Lascon laser system with Lascon controller LPC03 Laserline diode laser The diode laser ›LDM 500-60‹ has a wavelength of 935 nanometers and an output power of 550 watts. Laser type: LDM 500-60 Wavelength of 935 nanometers +/- 10% Laser power: 550 W Supply voltage 100-264V +/- 10% Nlsdpfxozdqkrj Airjh Max. power consumption 1.7 kW Frequency 1 phase 47-63 Hz Laser class 1 Type: LDM 500-60 Lascon controller LPC03 The LPC03 has the processing power of a complete PC in a very small space. Instead of a hard drive, a removable flash disk has been installed. Due to the elimination of the hard drive and the extremely low heat generation, the LPC03 is therefore ideally suited for tasks in the field of measurement, control and regulation in an industrial environment. The fiber-coupled MA pyrometers QP004 and EP004 can be easily integrated into the device. The fiber optic cable is then simply connected to the rear panel. The housing also provides space for the PCI card PCI-1P. In conjunction with the LASCON measurement and control system, the operating system and software are installed on the flash disk. Technical data: Motherboard: Half Size CPU card Slots: 1 x PCI, length max. 180 mm Drives: none Storage medium: removable flash disk Connections: USB front; Ethernet, RS232, VGA, keypad, mouse, USB rear Housing: 212 mm x 80 mm x 250 mm (height x width x depth) Protection class: Front: IP40 Environment: 15°C - 40°C Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, TOX Type: TZ-VSN Nedpfxezdtffo Airslh TOX – Full-Punch Riveting System The full-punch rivet initially separates all joining partners and then pushes the punched-out section out of the joining point. With its innovative technology for full-punch rivets, TOX PRESSOTECHNIK, the specialist for sheet metal joining, is expanding its range of products and services to include a future-oriented process. Full-punch riveting offers an additional mechanical sheet metal connection that is of great importance for lightweight construction and the joining of hybrid parts and assemblies. The rivet feeders, tongs, and tool holders are also designed to be so universal that full-punch rivets with diameters of 4.0 mm and lengths between 3.3 and 8.1 mm, as well as full-punch rivets with diameters of 5.0 mm and lengths between 3.9 and 9.0 mm, can be processed flexibly with both TOX hand tongs and TOX robot tongs. Press force: 55 kN Total stroke: 140 mm Rivet type: Diameter 5 x 4.6 Connection values Power: 3.4 kW Mains connection: 400/15/50-60 V/A/Hz Speed: 200 mm/s Mains type: 3P+N+PE Control voltage: 24 V DC Pre-fuse: 25 A Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Bluhm Systems Type: e-SolarMark FL Marking laser, fiber laser e-SolarMark FL. No functional guarantee (untested). Introduction: The e-SolarMark FL10W and 30 W are laser systems of Class IV according to the IEC 825 and EN 60825 guidelines (standards for applications with end customers). It is designed to be integrated into a system or operated separately with a protective housing. After installation, the laser system must meet the requirements for a product with a specific protection class, according to the aforementioned guidelines. The e-SolarMark is a laser system for marking and engraving plastics, metals, and foils, both stationary and in motion. Technical Specifications e-SolarMark Description The e-SolarMark system consists of two main components: 1. The marking unit with laser head (scanning head) with focusing lens. 2. The control unit includes the power supply, electronic control system, and firmware for system function, with I/O slots inside. The e-SolarMark includes a fixed galvo scan head, equipped with a lens for a square marking field with standard dimensions of 70 x 70 mm. Laser Specifications (Standard Version) Laser Type - Fiber Laser Laser Output Power - FL2 Model: 19W; typical Wavelength - 1062 nm typical Nlodjzgci Eepfx Airoh Internal Modulation - 20 to 80 kHz Scanner Head Description: Scan Head - Two galvanometric mirror scanners with a hard, highly reflective dielectric coating. F-Theta Lens Types and Their Properties: Lens - Marking field 70x70 mm to 300 x 300 mm Focal distance - 192 mm Operating Environment Conditions: Relative humidity up to 80%, non-condensing Operating temperature 5 - 40°C Recommended operating temperature 15-25°C Dimensions W x H x D Laser unit 122 x 108 x 495 mm Control unit 520 x 380 x 215 mm Cable length, marking/control unit 3 m Weight, marking unit 5 kg Weight, control unit 15 kg Mains voltage 115/230 VAC. 50/60 Hz, single-phase. Power consumption, FL2 model 450W Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by telephone.

Condition: used, 3D Systems Type: ProJet 3000 HD Uninspected ProJet 3D printers The ProJetTM HD 3000 prints precise plastic parts for use in functional tests, as communication models, for rapid manufacturing, rapid tooling, and other applications. With features such as a wide selection of materials, various resolution modes, and ease of use, these office-friendly 3D printers accelerate and maximize your return on investment (ROI). Printing Modes: HD - High Definition UHD - Ultra High Definition Net build volume (xyz) HD mode: 298 x 185 x 203 mm UHD mode: 127 x 178 x 152 mm XHD mode: n/a Resolution: HD mode: 375 x 375 x 790 DPI (xyz); 32μ layer thickness UHD mode: 750 x 750 x 890 DPI (xyz); 29μ layer thickness XHD mode: n/a Accuracy (typical): 0.1 - 0.2% of part dimensions Accuracy depends on build parameters, part geometry, part placement, and post-processor settings Email notification: No Build materials: VisiJet® EX200 build material: Durable solid material with a long service life VisiJet® SR200 build material: Cost-effective, multi-purpose material. Available in natural, blue, or gray. VisiJet® HR200 build material: Available in blue, specifically developed for investment casting applications. Nedozdnnuopfx Airelh Support material: VisiJet® S100 support material: Non-toxic wax material for melting the supports without manual intervention Power supply: 100-127 VAC, 50/60 Hz, single-phase, 15A Dimensions (L x W x H) printer without packaging: 737 x 1215 x 1504 mm Weight: printer without packaging: 254 kg ProJet Accelerator Software: Easy setup of the print job, template and queue management Automatic part placement and processing optimization tools Extensive part file editing tools Automatic support generation Job statistics Network compatibility: 10/100 Ethernet interface Hardware requirements: 1.8 GHz with 1 GB RAM (Open GL support 64 MB video RAM) or more Operating system: Windows XP Professional, Windows Vista, Windows 7 Supported file formats: STL and SLC Ambient temperature: 18-28 °C Noise level

Condition: used, Desktop Metal Desktop Metal 3D Printer Complete System Nledpfezd Tlljx Airsh 3D Metal Printer Studio System from Desktop Metal Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes a 3D printer, debinder, and furnace. Manufacturer: Desktop Metal Model: Desktop Metal Studio System Operating condition: Used (Good) Year of manufacture: 2019 Includes: Bound Metal Deposition (BMD) technology Features: Printed materials: Metal Technology: FDM Application: Industrial Other features: Office X-axis travel: 30 cm (12 in) Y-axis travel: 20 cm (8 in) Z-axis travel: 20 cm (8 in) Description: In contrast to laser-based systems that selectively melt metal powder, the printer extrudes bound metal rods – similar to an FDM printer. This eliminates the safety requirements often associated with 3D metal printing, and enables new features such as the use of closed-cell fillings for lightweight strength. Desktop Metal Studio Debinder (Delamination machine) Fully automatic debinding Cleaning tank: 17.4 L (in process) / 22.5 L (storage) Description: The debinder prepares green parts by dissolving the primary binder for sintering. With a low-emission design, it requires no external ventilation and is safe for an office environment. Automatic liquid distillation and recycling mean that no refilling is required between cycles. Desktop Metal Studio Sinter Furnace Hybrid technology (microwave & conventional heating elements) Build volume: 305x205x205 mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating power: 20 kW Function: Sintering Configuration: Chamber Heat source: Gas Other features: High temperature, automatic Maximum temperature: 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through an office door, the furnace delivers industrial-grade sintering in an office-friendly package. Built-in temperature profiles, tailored to each design and material, ensure uniform heating and cooling without the residual stresses that occur in laser-based systems. Condition: used Scope of delivery: (See image) (Changes and errors in technical data, information is subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Instrument Systems Instrument Systems LED Measurement Laboratory CAS140C, LEDGON 100, Integrating Sphere, Keithley 2611 – Complete System! For sale is a complete, professional LED measurement laboratory Njdszimaaepfx Airelh from Instrument Systems (Konica-Minolta Group). The system is suitable for the precise optical and electrical characterization of LEDs, LED modules, and small luminaires. All devices come from a laboratory environment, manufactured in 2007–2008, and represent high-quality industrial measurement technology. Scope / included components CAS 140C-152 Spectrometer (2008) Integrating Sphere ISP250-110 + ISP250-211 (2008) LEDGON 100 Goniophotometer (2007) CSD315 3-axis Controller + Emergency Stop Control Panel (2007) Keithley 2611 SMU / SourceMeter PC system including software: SpecWin Pro SpecWin Light Goniometer module Original license CDs User manual “LED test sockets” Cables & accessories as shown in the photos Technical features Measurement of total luminous flux (lumens) Spectral analysis (color temperature, CRI, xy, spectrum) Goniophotometric angular measurement Analysis of radiation patterns Electrical control and IV measurements with Keithley 2611 Fully automatic measurement sequences with SpecWin Pro CAS140C: approx. 36×15×30 cm / 7–9 kg Integrating Sphere: approx. 40×40×45 cm / 6–8 kg LEDGON 100: approx. 80×30×28 cm / 12–15 kg CSD315: approx. 42×12×35 cm / 5 kg Keithley SMU: approx. 36×9×28 cm / 5 kg Dimensions / weights (total approx. 40–45 kg) Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, Stratasys Stratasys Fortus 450mc Industrial 3D Printer + Krumm Tec CLEAN MATIC 3150 + Transformer – Complete System Description: The Stratasys Fortus 450mc is an industrial, high-end 3D printer from the FDM series (Fused Deposition Modeling). It is used worldwide in prototype manufacturing, small-batch production, mechanical engineering, the automotive industry, medical technology, and aerospace. For sale is a complete industrial 3D printing system consisting of: Stratasys Fortus 450mc (3D Production System) Krumm Tec CLEAN MATIC 3150 cleaning system for support material Nlsdpfx Aijzixy Sorsh Badger Magnetics 8 kVA transformer (suitable for EU power grids) The system comes from a professional application and was used for the production of high-quality functional parts and prototypes. Key features of the Fortus 450mc: Industrial FDM 3D printer with a large build volume: 406 × 355 × 406 mm Prints high-strength materials such as ABS-M30, PC, ASA, Nylon, ULTEM* Very high dimensional accuracy and repeatability Network-enabled, touchscreen, easy operation Ideal for prototyping, production of small series, tooling, jigs and fixtures (*depending on material licenses) Technical data Fortus 450mc Voltage: 120/208 V, 3-phase (transformer for EU operation included) Current consumption: 18 A Dimensions approx.: 127 × 91 × 196 cm Software version according to display: 6.2.6624.0 Krumm Tec CLEAN MATIC 3150 Model: CM 3150 US/PS 4 kW, 400 V, 50 Hz, 16 A Ideal for removing SR-30 / SUP706 support material Weight: 140 kg Weight approx.: 600–700 kg Important note: “The table shown in the photos is not part of the sale.” Scope of delivery Stratasys Fortus 450mc Krumm Tec CLEAN MATIC 3150 cleaning system Badger Magnetics 8 kVA transformer (Changes and errors in the technical data, information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), For sale: 3 aluminum frame silos. Previously used as granular material silos for an injection molding plant. Nlsdpfx Aiow I Efmjroh 2 x 75 m³ (13.10 m long, diameter 3 m), 1 x 95 m³ (15.70 m long, diameter 3 m). Manhole. Excellent condition.

Condition: used, functionality: fully functional, total width: 3,000 mm, total length: 1,800 mm, total height: 6,000 mm, Bag filter Dimensions: 3000 x 1800 x H 6000 Air flow rate m³/h: 10,000/13,000 No. 108 bag filters, L. 3000 Filtration area m²: 120 No. 02 explosion-proof ventilation panels No. 01 motorized screw conveyor No. 01 star valve Ladder Excluded: - Fan - Electrical control panel - Piping in general Njdpjzy R Shofx Airelh

Condition: used, operating hours: 1,386 h, lifting height: 4,600 mm, fuel type: electric, motor manufacturer: Elektro, gearing type: automatic, Still RX60-30L/600 electric forklift, year of manufacture: 2021, battery valid until 2026, hours: only 1,386!, previous owner: German Armed Forces, rated load capacity: 3,000 kg, lift height: 4,600 mm, fork length: 1,800 mm, scales, side shifter, triplex mast, free lift, STVZO lighting, including charger, in good condition, ready for immediate use. We will be happy to provide you with a leasing or financing offer upon request. Mr. Mihm (tel. ) will gladly assist you. Further information can be found on our website. Subject to errors and prior sale! Nodpozwlynjfx Airolh Power steering, overhead guard = Further information = Year of manufacture: 2021 Lifting capacity: 3,000 kg Overall height: 225 cm Please contact Tobias Ebert for further information.

Condition: good (used), Paper band filter with abundant nonwoven fabric SEITZ, type PFA 200 Nljdpfxe Afpyxe Airjh

Condition: used, Year of construction: 2017, Dimensions (L/W/H) 2.645 x 900 x 2.130 mm Filter capacity 14,5 m² Njdpfjz I Uc Dsx Airolh Number of dust containers 3 St. Weight ca. 500 kg 200 mm

Condition: new, Year of construction: 2025, Clean air dust extractor RLA 160, Holzkraft For wood dust and shavings, designed for commercial use Article number: 5131620 Brand: Holzkraft Chip collection volume: 2 x 165 l Nominal outer diameter of the extraction nozzle inlet: 160 mm Length approx.: 1755 mm Width/depth approx.: 830 mm Height approx.: 1654 mm Weight approx.: 260 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 9.21 m² Noise emission Sound pressure level max.: 73 dB(A) Volume flow Nominal volume flow: 1448 m³/h Dust class: H3 Scope of delivery: Metal fan impeller Inspection opening for cleaning the bypass filter Connection cable 5 m with CEE plug, 5-pole, and phase inverter Two swivel casters and two fixed casters with parking brake Nedehkzttspfx Airolh Manual cleaning Art. No. 5131620 Location: Available in stock, 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Chip extraction unit ASA 4303 mobile, with extraction unit that can be rotated by 180° For milling, planing, and sawing chips (not suitable for dust) Extraction unit can be rotated by 180°, enabling extraction from below or above Robust metal fan impeller Equipped as standard with high-quality chassis for improved stability and easy maneuvering Quick-release fasteners for filter and chip collection bag Fine filter bag, double-woven Dimensions and weights Chip collection volume 2 x 215 l External diameter of extraction nozzle, inlet 260 mm External diameter of extraction nozzle, outlet 2 x 100, 2 x 120 mm Length approx. 1700 mm Width/Depth approx. 600 mm Height approx. 2400 mm Weight approx. 69 kg Electrical data Idle speed 2950 min¯¹ Power consumption 3.8 kW Connection voltage 400 V Mains frequency 50 Hz Filter Nledpfx Ashk S Sleirsh Filter area 2 x 2.4 m² Noise emission Sound pressure level max. 89.9 dB(A) Volume flow Nominal volume flow 4300 m³/h Maximum negative pressure 2000 Pa Scope of supply: Two filter bags, two chip collection bags Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Technical specifications: ALKO clean air extraction system, mobile type, Model Mobil-Power Unit APU 120, motor power 1.5 kW, suction nozzle diameter = 120 mm, sound-dampened, mobile collection container, 135 liters, manual filter cleaning, dimensions: L = 1,085 mm, W = 650 mm, H = 1,985 mm, volume of dust container: 135 liters, weight: 117 kg, nominal volumetric flow rate (after cleaning): 814 m³/h. Exhibition model. Nedpfecdy Ndex Airslh Available at a special price. Location: In stock at Bitburg warehouse.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: AW028566, The A-Ward Eco Scrappa is a container tilting system (Tilting Container Loader) manufactured by the New Zealand-based company A-Ward Global. The system is specifically designed for the scrap and recycling industry: Nodoz Rk Rwspfx Airslh • Functionality: 20-foot and 40-foot sea containers can be tilted and emptied continuously at angles ranging from -10° to 90°. Container tilter with a universal frame. Autonomous hydraulic system with remote control. The system is operated by an operator, and the system includes an integrated weighing system, allowing containers to be precisely balanced during the loading process.

Condition: excellent (used), Concept Laser X Line 2000R BC2 Dual Laser Manufacturer: Concept Laser GmbH / GE Additive / Colibrium Additive Type: X Line 2000R BC2 Year of manufacture: 2015 Machine type: Metal 3D printing system Process: LaserCUSING® / Powder bed process Laser system: Dual Laser Material processed: AlSi10Mg For sale is an industrial metal 3D printing system from Concept Laser. The system was designed for the additive manufacturing of metallic components using the powder bed process and is suitable for research, development, prototyping, and industrial series production. BC2 upgrade / modernization The system has been upgraded to the newer BC2 system standard. According to the available documentation, a comprehensive retrofit was carried out, involving the replacement of numerous assemblies and components. As a result, the machine has a significantly modernized equipment and system standard compared to earlier X Line 2000R models. Technical data Build volume (X x Y x Z): 800 x 400 x 500 mm Mains connection: 3P/N/PE AC 400 V ±10 % Frequency: 50 / 60 Hz Max. current consumption: 17 A per phase Compressed air supply: 7 - 8 bar Inert gas supply: 5 bar Cooling: water-cooled system Machine dimensions approx.: 5,300 x 2,700 x 2,760 mm (L x W x H) Weight approx.: 13,400 kg Equipment Dual laser system Powder handling system Material conveying system Filter units Process gas supply Control cabinet technology Operating and control system Work platform with access ladder Water-cooled laser system Existing peripherals as shown in the pictures Documented service work 06/2026 Service performed by Colibrium Additive / GE Additive VarioScan system including associated E-box replaced Functional test performed No error messages documented after completion of the work Operating data Laser 1 RET: approx. 26,808 h Laser 2 RET: approx. 38,419 h Note: The RET values describe the time during which the lasers were operational. They do not correspond to the actual exposure or production time. Application areas Additive manufacturing of metal components Aerospace industry Nsdjzcn Efopfx Airjlh Automotive industry Tool and mold making Research and development Prototype manufacturing Industrial series production Scope of delivery Concept Laser X Line 2000R BC2 main unit Powder handling components Filter technology Existing peripherals as shown in the pictures Further accessories according to the existing scope of delivery Condition Used Machine from industrial production Laser window clean and clear Optical condition as shown in the pictures Inspection possible by appointment Availability: upon agreement. Scope of delivery as shown in the pictures. Subject to changes and errors in technical data as well as prior sale.

Condition: used, empty load weight: 9,480 kg, axle configuration: 3 axles, first registration: 09/2019, loading space length: 13,403 mm, loading space width: 2,490 mm, loading space height: 2,650 mm, loading space volume: 88 m³, suspension: air, tire size: 385/55 R22,5, wheelbase: 7,600 mm, Year of construction: 2019, Equipment: ABS, Tare weight: 9480kg, Loading area (L W H): 13.403 mm x 2.490 mm x 2.650 mmRiepu izmērs: 385/55 R22.5, Loading area volume: 88 m³, 1. ass: , 2. ass: , 3. ass: , Pneimatiskā piekare, Palešu furgons, Elektroniskā bremžu sistēma EBS, Rezerves riteņa turētājs (2x), Ferry फेरी फास्टनिंग के छल्ले, Šasija ir pieskrūvēta, 1x15- un 2x7-pin spraudnis, Āķis gaļai, Antispray, Nedez Sfqvopfx Airolh

Condition: used, Kübrich   Kübrich Test Systems 48V Belt Starter Generator - Component Test Bench   Details of the test bench: (See Figure 13) Frame with (1) Mounting device for a belt starter generator (2) Load machine (3) Belt (4) MP1: Control cabinet (5) MP3: Control cabinet for control, interface panel with main switch, I/O (6) MP2: Control cabinet with Simotion (7) MP4: Control cabinet with DC-DC converter (8) H3: Measuring technology box (9) H4: Interface box   Njdpfx Aszhkb Sjirslh Intended use: The test bench is used for carrying out tests on belt starter generators during development.   Technical data: Electrical connection data Power supply: 400 V / 32 A Battery simulation: 0 - 60 V Current: 0 - 250 A (continuous) Current: 330 A (short-term, less than 1 s) Control voltage 24 V   Mechanical performance data according to the data sheet of the load machine A gear ratio of 1:2 to the test specimen shaft must be considered. Speeds: Load machine: Manual operation: 0 - 50 rpm Automatic operation: min Test specimen motor: Manual operation: 0 - 0 rpm Automatic operation: 0 - rpm   Dimensions and weight Width: 850 mm Height: 1386 mm Length: 1687 mm   Weight: approx. 1.2 t   Condition: used   Scope of delivery: (See Figure)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: used, INFICON Hydrogen Leak Detection System / Hydrogen Leak Detector INFICON Sensistor ISH2000 with TGF10 Tracer Gas Filler Complete system for professional hydrogen leak detection with AP57 search probe. For sale is a used hydrogen leak detection system from the manufacturer INFICON. The system consists of the Sensistor ISH2000 hydrogen leak detector, the TGF10 tracer gas filler for automatic evacuation and filling of test specimens, and an AP57 search probe for precise leak detection. The hydrogen trace gas method is suitable for the fast and precise leak testing of pipelines, heat exchangers, pressure vessels, refrigeration and air conditioning components, and industrial assemblies. Technical data Manufacturer: INFICON Type: Sensistor ISH2000 Article number: 590-750 Device type: Hydrogen leak detector Made in Sweden Supply voltage: 100 - 240 VAC Mains frequency: 50 / 60 Hz Display: LCD Printer port Probe control port APC system for controlling external components Nlsdpfx Aszdggweiroh INFICON TGF10 Tracer Gas Filler Article number: 590-557 Connections: 4 x ISO G1/4" Manometer: -1 to +9 bar Trace gas pressure: 0 - 9 bar Compressed air supply: 4 - 8 bar Evacuation rate: 70 Nl/min Ultimate vacuum: -0.85 bar Filling rate: 600 Nl/min Dimensions: approx. 100 x 275 x 205 mm Weight: approx. 4.7 kg Functions Hydrogen leak detection with forming gas Automatic evacuation of test specimens Automatic filling with trace gas Leak detection with AP57 search probe Acoustic and visual leak indication APC-controlled test sequences Suitable for industrial use for series and individual tests Equipment INFICON Sensistor ISH2000 INFICON TGF10 Tracer Gas Filler INFICON AP57 Counter Flow Probe Connection cable Power cable Original packaging ISH2000 Original packaging TGF10 Accessories as shown in the pictures Application areas Industrial leak detection Leak testing Pipeline testing Heat exchanger testing Refrigeration and air conditioning technology Pressure vessel testing Automotive industry Manufacturing and testing systems Scope of delivery 1x INFICON Sensistor ISH2000 1x INFICON TGF10 Tracer Gas Filler 1x INFICON AP57 Search Probe 1x Cable set 1x Power cable Original packaging Accessories as shown in the pictures Condition Used Devices come from an industrial environment Optical condition as shown in the pictures Display is active Original packaging available Normal storage and signs of use The table shown in the photos or other items not explicitly mentioned are not part of the sale. Shipping is possible. Subject to changes, errors and prior sale. We can gladly answer any further questions by phone.

Condition: used, Year of construction: 2016, Bystronic BySprint Fiber 3015 + ByTrans 3015 Extended – Laser cutting machine with loading and unloading system Working area: 3000 x 1500 mm Laser power: 4000 W Nedjz Itl Djpfx Airelh - ByTrans 3015 loading and unloading system - ByVision CNC control with touchscreen - Handheld control unit - Fiber 4000 laser source - Cutting parameter assistant - Automatic nozzle cleaning - Automatic nozzle changer with 40 positions - Operator protection in the cutting area and loading/unloading area - Extraction system - Extraction device for sheet separation - Compressed air connection - Operating hours approx. 76,000 - Cutting hours approx. 28,000 - Year of manufacture: 2016 Included packages: - Material specification package - Package for part tolerances & cutting edge quality - Package for cutting gas supply & cutting quality

Condition: good (used), mileage: 6,87,266 km, power: 353 kW (479.95 HP), first registration: 05/2020, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 4x2, wheelbase: 3,600 mm, fuel: diesel, brakes: retarder, color: other, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,090 mm, total width: 2,550 mm, total height: 3,980 mm, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking heater, power mirror, retarder, seat heater, tachograph, traction control, - Heated mirrors - Digital tachograph - Fixed - High roof - Hydraulic system - LED lamp - Alloy wheels - Manual - Auxiliary drive - Pump - Radio/cassette - Lane keeping assist - Fabric - Auxiliary braking system Number of axles: 2, Configuration: 4x2, Tare weight: 7696 kg, Gross vehicle weight: 20000 kg, Total tank capacity: 540 liters, Height of the fifth wheel coupling: 120 cm, Fifth wheel coupling: Fixed, Number of locks: 1, Alloy wheels, Suspension type: Air suspension, Type of cab: High roof, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, GPS navigation, Color: Multi-colored, Heated mirrors, Lighting type: LED lamp, Lane keeping assist, Climate control, Seat heating, Bluetooth, Engine power: 353 kW (473 Hp), Engine displacement: 11120 cc, Fuel: Diesel, Euro: 6, Transmission type: AS-Tronic, Transmission type: ZF, Gears: 12, Auxiliary braking system, Retarder brand: Intarder, Power steering, ABS, ASR, Hydraulic system, Auxiliary drive, PTO type: 1, Pump, Central locking, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual, Durabright, hydraulic unit, INTARDER! Transmission Transmission: ZF, 12 gears, Automatic Axle configuration Brakes: Disc brakes Axle 1: Tire size: 385/65R22.5; Steered; Tire tread depth left: 7 mm; Tire tread depth right: 4 mm; Suspension: Leaf spring suspension Axle 2: Tire size: 315/80R22.5; Double tires; Tire tread depth left inner: 1 mm; Tire tread depth left outer: 3 mm; Tire tread depth right inner: 8 mm; Tire tread depth right outer: 9 mm; Suspension: Air suspension Weights Tare weight: 7,696 kg Payload: 12,304 kg GVW: 20,000 kg Functional Pump: Yes Nlsdpfx Aijy U Evyorsh Maintenance APK (Technical Inspection): valid until 04.2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial information Leasing price: 512 € per month (default, 60 months); Ask for more information and conditions Identification License plate: KLEYN1 Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractors, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry through our website. Inquire directly about our European warranty package.

Condition: used, Double cutting system 90 kW, 150 A, (60Hz - 104 kW - 151 A) Nlodsz Uc Suopfx Airsh 3 x 400 V dimensions (l x w x h) : ± 1.950 x 1.450 x 1.600 mm 2 knives: 20 teeth-4.8mm, 20 teeth-1.3mm 1 speed (3000 revolutions /min) Connection DN 100 Supply height: ± 950 mm Output height: ± 1,200 mm

Condition: used, Year of construction: 2007, RA1784 Pallet rack system Galler OMEGA used 16600 x 5400 x 1350 mm Installation in a hall Nlsdpfx Aiek Abbbjroh Shelf height: 5.400 mm shelf depth: 1.350 mm clear field width: 3.200 mm stored goods: pallets with stored goods Deep storage: 1,350 mm Storage arrangement: 1. stored goods on the floor 2. to 5 stored goods on pairs of tie bars, Shelf load on pair of spars at daylight Field width of 3.200 mm and : 2.100 kg shelf height 1.500 mm Field load: 8.4 to. at 1,500 mm buckling length (min. 4 fields) →Alle Loads are understood to be with evenly distributed load. Painting: Upright frame: Sendzimier galvanized Support beam: RAL 7035 light grey WITH RUST SPOTS (SUPERFICIAL) Installation: 1 pc. one-sided shelf axis, standing on a hall wall 5 x 3,300 + 100 = total length 16,600 mm consisting of: 6 pcs. stand frame Galler Omega screwed 5.400 x 1350 mm 40 pcs. carrier beam Galler Sigma 3.200 mm 80 pcs. safety pins Price net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, Würzburg Optional if required 2 pcs. ram protection corner used At the beginning or end and at passages to protect the shelf stem For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics