Used Foil Cutting Machine for sale (65,857)

Year of construction: 1987, condition: ready for operation (used), Center width: 400-800mm, rotational speed: 1000-2700/min, workpiece diameter: 10-300mm, grinding wheel diameter: 40-300mm, swivel angle: -45 to 45°, length: 3000mm, width: 2500mm, height: 2275mm, with oil mist separation system Hoffmann (new filter inserts), filter system gravity belt filter Faudi, hydraulic unit, additional grinding head for grinding worm gears, grinding mandrels diameter 50, 40, 27, 22, holder for SK40 and MK5, driver sets for different clamping diameters, operating instructions, circuit diagrams in paper form, an inspection is possible. Dedpfjrgahxox Afpoun

Condition: ready for operation (used), Max. Plate dimensions: 2400x2100mm, table dimensions: 4100x3600x1450mm, water jet nozzles: 0.12/0.15/0.17/0.20/0.25mm, with documentation, 3D cutting head, drives, software, tools, spare parts package, and high pressure pump UHDE HPS 4022, multifunctional CAM cutting system with high precision, without abrasives, 3D 5-axis cutting head for flat cutting of different materials up to 45° bevel, with cutting nozzle make Allfi III/V, electrical height adjustment of the nozzle up to 200mm, for different material heights, dynamic servo drives for 90m/min, acceleration up to 70 m/s², machine frame in truss construction made of aluminum, cutting bridge, stainless steel water collection tray with water drain, stainless steel honeycomb elements as cutting table support, PC-based NC control Expert-PC and TFT monitor, cutting table, housing and hold-down device, on-site inspection is possible. Duedpfx Aforiwd Eepjn

Year of construction: 2014, condition: ready for operation (used), A complete Soitaab waterjet cutting system, which until the year 2023 was only a demonstration machine, is available. 1) Main system Soitaab Thesis 2040, year of manufacture: 2014, cutting dimensions X/Y/Z: 4000mm/2000mm/200mm, control system: Soitaab 905unoS, control system year of manufacture: 2023, overall system dimensions X/Y/Z: approx. 5400mm/3300mm/2100mm. 2) High pressure pump KMT Neo 50, year of manufacture: 2022, max. operating pressure: 4100bar, last service: 09/2025. 3) Abrasive unit KMT Feedline V, year of manufacture: 2015. Including a storage container Müller, container capacity: 1000kg. Documentation available. An on site inspection is possible. Dsdpfx Aox Ih D Hofpeun

Year of construction: 2016, condition: ready for operation (used), Cutting range X/Y: 3000mm/6000mm, max. oxyfuel cutting: 300mm, max. cut of unalloyed/alloyed steel: 64mm/50mm, max. cut of waterjet cutting: 100mm. Including Hypertherm HyPrecision high pressure pump. The combination of water and plasma cutting can lead to dimensional deviations. Documentation available. On-site inspection is possible. Dedpfx Afsu H H E Sepeun

Condition: ready for operation (used), Year of construction: 2023, Usable working area: 2000x3000mm, z-axis: 50mm, repeatability on the entire surface: ±0.05mm, X/Y/Z-addressable resolution: 0.001mm, max. acceleration: 15m/s², max. working speed in XY-axis: 2000mm/s, drives: X/Y-system with linear motors, Z-axis with servo motor. Laser protection class: Class 1, with cover, base body: stable, welded steel frame structure, axis system: X/ Y/ Z movement axes, drive: linear motor drive, contactless and low-wear, removal system: 2000mm extension, conveyor: Aluminum slats with servo motor drive, Pressure roller: for material, Laser source: CO2 laser 300W, closed and maintenance-free, Cooling: Closed cooling circuit with water recooler for laser, Cutting head: 5 inch, lens, cutting nozzle, cutting gas supply, Extraction: Extraction tray for small parts and dust, Software: CAM control software ICARO. Motorized brush width: 2000mm, SEI PC console: without computer, to be provided by the customer, Extraction unit: 2x extraction fans 5.5kW each, Scanner: Manual barcode scanner, Unwinding device: for material rolls with unwinding bar, Unwinding system: Connection available. The system was only installed and approved, series operation did not take place. On-site inspection is possible, documentation available. Duodjwbuzfjpfx Afpon

Year of construction: 2008, condition: ready for operation (used), A Trumpf CNC CO2 laser cutting system including Loadmaster is available. Laser sources: 2, laser power: 2x3200W, working range X/Y: 7000mm/2500mm, max. sheet thickness mild steel/stainless steel/aluminum: 20mm/15mm/10mm, max. traversing speed: 215m/min. Machine dimensions X/Y/Z: approx. 9000mm/4500mm/2500mm, weight: approx. 11600kg. Documentation available. On-site inspection is possible. Duedpfxowynv Ho Afpjn

Year of construction: 1985, condition: ready for operation (used), Cutting width: 1150mm, max. format: 1150mm/1150mm, max. stack height: 120mm, min. cutting format: 20mm, pressing force: 40kN, cutting speed: 42 cuts/min, machine dimensions X/Y/Z: approx. 2650mm/2650mm/1700mm, weight: approx. 3000kg, control: MCS-2 TV. Documentation available. On-site inspection is possible. Dsdpfx Afowt Dblopoun

Condition: ready for operation (used), A hydraulic profile-steel/universal steel shear with integrated punching unit Muhr & Bender is available. Punching force: 500kN, punching capacity for 15mm steel: 25mm, punching stroke: 60mm, stroke rate: 47/min, throat depth: 750mm, installation height: 215mm, working height: 1150mm, flat-steel cutting capacity X/Y: 180mm/20mm. Machine dimensions X/Y/Z: approx. 1500mm/900mm/1900mm, weight: approx. 2000kg. Includes various round and slotted punches with dies. An inspection on site is possible. Duedpfjx E Adpsx Afpen

Year of construction: 2005, condition: ready for operation (used), Working area X/Y/Z: 3000mm/1500mm/115mm, laser power: 3200W (3,2kW), laser type: Trumpf Trumatic TC L 3020, max. material thickness steel: 20mm, cutting heads: 2x. Machine dimensions X/Y/Z: approx. 4600mm/9300mm/2000mm, weight: approx. 10500kg, laser hours: 56738h, beam hours: 26243h. Including cooling circuit filter unit Riedel and pallet changer. The door of the machine has an error in the acknowledgement. This can be easily solved by pressing the acknowledgement button and the cancel button. Documentation available. On-site inspection is possible. Duodpfsv Daf Njx Afpen

Year of construction: 2010, condition: ready for operation (used), For sale is a CNC laser cutting machine from TRUMPF. laser power: approx. 3000W (3kW), working area: X/Y/Z 3000mm/1500mm/115mm. Additionally, a suitable Liftmaster from the year 2015 is offered, which can also be purchased separately. Dusdpfoxxa Ucex Afpen

Year of construction: 1998, condition: ready for operation (used), Travel X/Y/Z: 2520mm/1550mm/300mm, max. sheet dimensions X/Y: 5040mm/1550mm, max. material thickness mild steel/stainless steel/aluminum: 12mm/6mm/3mm, max. workpiece weight: 330kg, positioning speed: 80m/min/80m/min/60mm/min, positioning accuracy: +/-0.01mm. Machine dimensions X/Y/Z: approx. 5650mm/3650mm/2100mm, weight: approx. 6600kg, operating hours: 29499h. Including Fanuc Laser-Model C1500. Documentation available. On-site inspection is possible. Djdev Ip R Aopfx Afpeun

Year of construction: 2009, condition: ready for operation (used), A CNC CO2 laser cutting machine Amada with automated storage system LKI is available. 1) Laser power: 4kW (4000W), travel X/Y/Z: 3100mm/1550mm/100mm, max. table load: 920kg, max. material thickness steel/stainless steel/aluminum: 20mm/12mm/10mm, laser system dimensions X/Y/Z: approx. 10000mm/4300mm/2100mm, weight: approx. 11000kg. 2) Pallets: 8, cutting pallets: 2, raw material: 2/3, unloading: 4/3, max. unloading height: 2200mm, max. material dimensions X/Y: 3050mm/1525mm, min. sheet dimensions: 2000mm/1000mm, height: 5400mm. Documentation available. On-site inspection is possible. Duedpfev Rp S Sex Afpsn

Condition: ready for operation (used), Year of construction: 2016, A complete SML winder including core magazine is available. Infeed part roll width: 2600mm, max. film end width: 2350mm, winding shafts: 6/3 inch, max. mechanical speed: 250m/min, max. roll diameter: 980mm, film thickness range: 15µm-2500µm, core diameter: 3 inch, core type: cardboard/plastic, roll change time: 4min, deposit capacity 2nd table: 15 rolls, power requirement: 52kW, edge trimming: In-Line, Knife type: free cut with razor blade, Winder mode: gap/contact, Roll delivery: 3-axis robot. Including non-stick rollers, linear guide, scale, robot and core magazine. Documentation available. On-site inspection is possible. Dedpfx Aevripyefpsun

Year of construction: 2017, condition: ready for operation (used), Cutting heads: 2, cutting head type: AWJ 2D, abrasive feed: system SM4000, pump type: KMT Streamline SL-VI Standard, max. pump pressure: 3800bar. Table dimensions X/Y: 3200mm/1710mm, cutting dimensions X/Y: 3010mm/1510mm, travel range X/Y/Z: 3010mm/1510mm/250mm, travel speed: 12m/min, cutting head distance range: 90mm-450mm, positioning accuracy: +/-0.075mm, repeatability: +/-0.035mm, control: Fanuc 0i-MF, operating hours: 4866h. Includes oil cooler, water treatment, and safety zone. Documentation available. On-site inspection possible. Dujdpfx Afjxp Rcfjpjn

Year of construction: 2005, condition: ready for operation (used), A robot-based waterjet cutting system without a high-pressure pump is available. 1) Industrial robot ABB IRB 6600 M2004, axes: 6, load capacity: 175kg, reach: approx. 2800mm, repeat accuracy: +/-0.05mm, robot weight: approx. 1750kg. 2) Water basin catcher TF3020, working area X/Y: 3000mm/2000mm, basin dimensions X/Y/Z: approx. 3150mm/2150mm/700mm. 3) High-pressure cutting head, reaction time: 0.1s, operating pressure: 400MPa (4000bar), weight including collimation tube: approx. 1500g. 4) 3D collimation tube extension for pure water operation. 5) 1/4 inch HD filter MF4-56, filter insert: 56µm, connection type: HP4, operating pressure: 450MPa (4500bar). 6) Complete high-pressure piping of the robot. 7) Pneumatic components for controlling the cutting valves and metering slides. 8) High-speed motor. 9) Protective housing for the entire robot system, parapet height: 1090mm, wall thickness: 45mm, sound insulation: approx. 25dB(A), internal dimensions X/Y/Z: approx. 3955mm/3955mm/3470mm, external dimensions X/Y/Z: approx. 4050mm/4050mm/3600mm. Total system dimensions X/Y/Z: approx. 4500mm/4000mm/3700mm, total system weight: approx. 3500kg. Documentation available. On-site inspection is possible. Dodpfxewv Ul Tj Afpeun

Condition: used, Corrugation types: F/W/E/B/C, double corrugation types: FF/FE/FB/EB, gray board weight: 600g-1200g/m², board thickness range: 0.15mm-6mm, grammage capacity: 180g-1200g/m², min. sheet size: 590mm/700mm, max. sheet size: 1015mm/1410mm, blade size X/Y: 995mm/1390mm, sheet start to 1st blade: 15mm. Documentation available. On-site inspection is possible. Dedpfxewltzxj Afpoun

Year of construction: 2020, condition: ready for operation (used), A CNC cut-off grinding machine Anthratec, previously used for cutting grids, is available. Cutting speed at 2000rpm: approx. 42m/s, speed range: 500–3500rpm, connected load: 30kW, control: Siemens S7-1200. Documentation available. An on-site inspection is possible. Dusdpfx Asw H Sciefpsn

Year of construction: 1992, condition: ready for operation (used), Application range: large threads, breakage protection: from M3.0, capacity in stainless steel: up to M10, capacity in 9SMn28: up to M10, connected load: 2000W, with automatic Z-axis feed for automation. The machine is fault-free and operational, showing signs of use. With documentation and five holders. An on-site inspection is possible. Djdjx Hfgpepfx Afpsun

Year of construction: 2011, condition: ready for operation (used), Laser: CO2, laser source: Convergent Lasers CP 3000, working dimensions X/Y/Z: 3065mm/1500mm/150mm, max. traverse speed: 140m/min, positioning accuracy: +/-0.03mm, repeatability: +/-0.03mm, max. cutting capacity steel/stainless steel/aluminum: 20mm/12mm/8mm. Machine dimensions X/Y/Z: approx. 10600mm/3550mm/2500mm, weight: approx. 10000kg, control: Primach-20L, laser hours: 56739h. Including extraction system. Documentation available. On-site inspection is possible. Dusdpfsyh Nu Nsx Afpjn

Year of construction: 2007, condition: ready for operation (used), Weight: 2t, an inspection is possible, with documentation. Dusdpfxjrp E Nrs Afpsn

Condition: new, Year of construction: 2025, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. Dujdpshv U S Nsfx Afpen With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 230188 € 3 kW Wechseltisch 16 mm 8 mm 8 mm 5 mm 8 mm 27,9 (mit Absaugung) kW 4100 x 2070 mm 4100 mm 2070 mm 125 mm 4064 x 2032 mm 240 (für 3 - 12 kW) / 400 kg/m² 3900 (für 3 - 12 kW) / 64 kg 100 m/min 100 m/min 141 m/min 14 m/s² +/- 0,05 mm +/- 0,05 mm 32 s The HD-FN has two tables which are automatically switched alternately to enable simultaneous cutting and loading/unloading. The shuttle table is positioned longitudinally, which results in the best possible accessibility for optional loading and unloading systems. Control, laser source and cooling are integrated into the machine. The cutting head has automatic focus adjustment. The system consists of the following components: Shuttle table (positioned longitudinally for best possible accessibility for optional loading and unloading systems) Encapsulated cutting room with protective glazing CNC graphic control with touchscreen Laser source Brilase Premium Cutting head with automatic focus adjustment Dodpfxsx Urp Hs Afpsun Integrated cooling unit for cutting head and laser source CAD/CAM software Lantek for programming including autonesting Positioning laser Sheet check system (automatic detection of sheet position and dimensions) Automatic nozzle cleaning Central lubrication Slug box Working area lighting Multi-chamber suction system Light barrier protection for the changing table Remote maintenance access Air condition for electrical cabinet Equipped according to CE guidelines ALTERNATIVE LASER SOURCES: Material 4 kW 6 kW 12 kW 15 kW 20 kW Mild steelS235 20 25 30 35 40 Stainless steel(304) 10 15 25 35 40 Aluminium (5083) 12 20 30 35 40 Copper 6 10 15 15 15 Brass(CuZn39 Pb3) 10 12 20 20 20 OPTIONS: Suction unit with filter Sheet handling systems Automatic nozzle change

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 160788 € 3038.89 € 3 kW 12 mm 6 mm Duodpfswiqr Ajx Afpen 6 mm 3 mm 6 mm 26,5 kW 250 mm 16 mm 160 x 160 mm 200 x 150 mm 6000 mm 58 kg/m +/- 0,2 mm +/- 0,05 mm rund, quadratisch, rechte 40 m/min 94 m/min 30 m/min 510 °/s The machine consists of the following components: - Encapsulated cutting room with protective glazing - CNC graphic control with touchscreen - Laser source Brilase 3 kW Premium incl. chiller - Cutting head with automatic focus adjustment - manual loading -manual unloading table 3 m - Positioning laser - Central lubrication - slug car - CAD/CAM software with autonesting - Work area lighting PRICE FCA TÜRKIYE OPTIONS: Suction unit with filters Semi-automatic loading system Manual unloading table 6 m with conveyer Durma cloud license Lasersources with 4 or 6 kW on request

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 1,500 W, input voltage: 380 V, total length: 3,000 mm, total width: 1,500 mm, Equipment: documentation/manual, WatMachinery OT3015F is a modern fiber laser cutting machine with a 1500 × 3000 mm working area, equipped with high-quality industrial components and an automatic Raytools BS03K cutting head. The machine is designed for precise and efficient cutting of carbon steel, stainless steel, aluminum, and brass. Available laser source powers: 1500 W / 2000 W / 3000 W (Raycus). Key Advantages - Heavy-duty construction – high rigidity, stability, and vibration resistance - 4th generation aerospace-grade aluminum gantry – low weight, rapid acceleration, and high motion accuracy - Raytools BS03K cutting head – automatic focusing, optics protection, high cutting speed - Raycus laser source – reliability, long service life, and high energy efficiency - Raytools XC3000S control system – intuitive operation, file editing, remote control capability - INOVANCE servo drives – high precision, fast dynamic response, stable operation Rebi N Auewiwtyofcen - Precision drive system – LEITESEN racks (dual drive) + PEK Italia linear guides - SMC pneumatic system (Japan) – reliability and longevity - Schneider (France) electrical components – high safety standards - S&A industrial chiller – dual-circuit cooling, alarms and machine protection - Fume extraction system – efficient smoke removal and improved working conditions - Complete industrial configuration – machine ready for operation immediately after installation Technical Specifications Model: OT3015F Working area: 3000 × 1500 mm Laser source: Raycus Fiber (1500–3000 W) Wavelength: 1070–1080 nm Interfaces: USB, RJ45 X Axis - Max speed: 80 m/min - Travel: 3000 mm - Positioning accuracy: ±0.05 mm/m - Repeatability: ±0.05 mm Y Axis - Max speed: 80 m/min - Travel: 1500 mm - Positioning accuracy: ±0.05 mm/m - Repeatability: ±0.05 mm Z Axis - Travel: 100 mm Additional Parameters - Maximum acceleration: 0.8 G - Power supply: 380 V / 50 Hz - Operating mode: 24/7 continuous operation - Machine weight: approx. 1500 kg Dsdewiwtyepfx Afpeun - Dimensions: 4500 × 2300 × 1500 mm Applications: ✅ Kitchen equipment industry ✅ Bathroom equipment industry ✅ Automotive ✅ Advertising and metalworking Why choose us? JET STAR INTERNATIONAL offers comprehensive solutions for laser cutting machinery, providing service, training, and spare parts availability throughout Europe. Our machines combine quality with affordability, delivering an excellent cost-to-performance ratio. 🗂️ Available to order 📞 Contact us for individual offers and delivery terms! 🌍 Support available in Polish, English, and German.

Condition: good (used), Year of construction: 2007, CNC portal plasma cutting machine Manufacturer: Microstep Dusdpfx Aeuv Hkgefpen Model: SPL-P 12001.20 Year of manufacture: 2007 CNC control 1 plasma torch with power source Kjellberg HiFocus 160i Extraction table: 2 x 12 m Filter system Donaldson Torit DCE